Creating and using a calculated field in business rule from the currency conversion of another field.

Hello,
I'm creating a calculated field with a set currency for a business rule. I'm planning to use it as a deficiency criteria. I want the values to come from the currency conversion of another field. Can someone provide me the step by step procedure on how to do it?
Some documents would be great.
I've been trying to do it on my own but I've gotten lost.
Thank you.

Thank you for all your help above.
Just to confirm your advice, am I right with the following conclusions? :
1. The script (function) to fill the text field with the modification date of a different PDF file needs to be stored in a folder level .js file.
2. The document containing the text field needs to call the .js function either within the document script or within the custom script property of the text field itself.
Further to that can you just advise on the syntax for accessing the modification date of the other document.
Do I need to assign a variable to the address of the file to be used, and then use this variable in the text form filling script (as below) or can I use a direct file reference at the .modDate command.
var LastSync = "C:\sync\bin\lastsync.pdf";
var strMsg = util.printd("h:MM tt",LastSync.modDate) + " on ";
strMsg += util.printd("dddd, d mmmm, yyyy",LastSync.modDate);
this.getField("LastSyncDate").value = strMsg;
If the syntax is totally different to the above I would be very grateful for some guidance in the right direction.
I much appreciate your time to help me ... I'm almost there.
Kind Regards,
Nifty

Similar Messages

Enable/select/change to Business rules from Calc Manager in App settings

Hi all,
Somehow we are Unable to Expand the Planning Node in Essbase Administration Services (EAS) Console When Creating Business Rules. I am not sure is it
I am not sure, is it because of one of the application has calc settings as calc manager in under application settings in dev environment, but in other environment all applications set it as Business Rules.
I was trying to change from Calc Manager to Business rules in App settings, but it is grayed out and not able to change to Business rule from calc manager.
Please suggest me.
Thanks,

If it say been set incorrectly then you may need to update one of the relational tables for the application.
Table - HSP_SYSTEMCFG
Field - CALC_ENGINE_OPTIONS
Values - 1=HBR, 2=CalcMgr
Restart the planning application web app service after making changes.
Cheers
John
http://john-goodwin.blogspot.com/

Run a Business Rule from Custom Javascript

Hi,
I would like to know whether it is possible to call a business rule from the custom javascript, ValidateData.jsp. If it is ok, any simple example?
Thanks

I'd say try running individual rules from Planning and see if they fail individually.
If that works, then start by adding one rule in the sequence and try running it.
Try finding out if the issue is specific to the sequence or if a new sequence with a rule that you know runs from Planning.
When you say there's nothing in the Application log, somehow seems the rule isn't hitting Essbase at all. The error comes before that.
Cheers,
Abhishek

How to Define and Use Formatted Search in Sap Business One 2007

Hi
Any Document on How to Define and Use
Formatted Search in Sap Business One 2007.
Thanks

Hi Manish,
It is Very simple Procedure of defining FMS(Formatted Search)
in SAP 2007B Same as SAP 2005B & SAP8.8 Version
Do this,
->> Open the require Document.
for ex. IF you add the UDF in Marketing Document(Sales/Purchase)
1. Goto the UDF (or) any Default(Original) Field and Click ShiftAltF2.
2. Select the SEARCH BY SAVED QUERY.
3. Assign the FMS Query.
4. Select the AUTO REFRESH WHEN FIELD CHENGES.
5. Select the require Auto refresh field
6. Check the Refresh Regularly (or) Display Saved Values.
Regards,
Madhan.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

How do I create and use a package?

Sorry for the noobish question, but I have never had the need to use a package and currently would like to learn how they work just to satisfy my own curiosity.
Suppose I have a file named Node.class in a folder named Classes, and I have another class named Main.class sitting in another folder. I want to create a Node object using the Main class.
How do I accomplish that? Would I need to use a package?
I tried to write package Classes; on my Main file but it did not work. thanks

This is an old explanation I wrote:
This is a minimal explanation of packages.
Assume that your programs are part of a package named myapp, which is specified by this first line in each source file:
package myapp;
Also assume that directory (C:\java\work\) is listed in the CLASSPATH list of directories.
Also assume that all your source files reside in this directory structure: C:\java\work\myapp\
Then a statement to compile your source file named aProgram.java is:
C:\java\work\>javac myapp\aProgram.java
And a statement to run the program is:
java myapp.aProgram
(This can be issued from any directory, as Java will search for the program, starting the search from the classpath directories.)
Explanation:
Compiling
A class is in a package if there is a package statement at the top of the class.
The source file needs to be in a subdirectory structure. The subdirectory structure must match the package statement. The top subdirectory must be in the classpath directory.
So, you generate a directory structure C:\java\work\myapp\ which is the [classpath directory + the package subdirectory structure], and place aProgram.java in it.
Then from the classpath directory (C:\java\work\) use the command: javac myapp\aProgram.java
Running
Compiling creates a file, aProgram.class in the myapp directory.
(The following is where people tend to get lost.)
The correct name now, as far as java is concerned, is the combination of package name and class name: myapp.aProgram (note I omit the .class) If you don't use this name, java will complain that it can't find the class.
To run a class that's NOT part of a package, you use the command: java SomeFile (assuming that SomeFile.class is in a directory that's listed in the classpath)
To run a class that IS part of a package, you use the command java myapp.aProgram (Note that this is analogous to the command for a class not in a package, you just use the fully qualified name)

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

how to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

See the below discussion
How to create and use Webservice controls using WSDL in weblogic portal10.3
Thanks,
Venkat Sarvabatla

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

One structure is created and using in 3 queries, i want to modify that stru

hi gurus,
one structure is created and using in 3 queries, i want to modify that structure in only one query but it will not effect other two.wat should i do for that?
thanx in advace,
i will assign points,
srinivas.

Hi srinivas,
This scenario could be frequently seen in a project. I assume the structure you mentioned is saved as a global structure, then in the query which you want to modify, right click on the structure and choose "Remove Reference". This function copies the global structure to a local one, in which you can change it and the other two won't get affected.
Hope this helps.
Regards,
Aaron

SQL08 Need example of creating AND using a Fact (degenerate) dimension

Can someone post a link to some examples of setting up and using a Fact (degenerate) dimension. Ive got the SSAS 2008R2 Adventureworks DW project setup and I see a few Fact dimensions in there, but id like some descriptions to go along with this or
something similar.
My scenario:
Orders - attributes include : Order#, OrderStartDate, SalesPerson, BusinessType, MarketType
OrderTransactions - attributes include: OrderKey , TransactionAmount, TransactionType, TransactionDate, AccountKey
Description:
Its more or less the typical Order > Order Detail type scenario, with the addition of Orders have some additional attributes.
So I want to be able to measure on for example:
Order counts - broken down by BusinessType and MarketType , and then within a date range
Revenue - which will be totals of transaction amounts, again grouped by BusinessType and MarketType, but also be able to drill down to see the related Order#

Hi Shiftbit,
According to your description, you need some examples about create and use degenerate dimensions, right?
Degenerate dimensions, also called fact dimensions, are standard dimensions that are constructed from attribute columns in fact tables instead of from attribute columns in dimension tables. Here is document that describes how to create and use degenerate
dimensions step by step, please refer to the links below.
https://msdn.microsoft.com/en-us/library/ms167409(v=sql.100).aspx
http://www.jamesserra.com/archive/2011/11/degenerate-dimensions/
Regards,
Charlie Liao
TechNet Community Support

How do I create and use a watermark in aperture?

Hello there!
How to I create and use a watermark in aperture? do I need to download a 3rd party plugin? Any recommendations?
Thank you!

Aperture does not support the creation of watermarks; if you want a watermark image with transparent regions you need an application that can handle alpha channels - Prewiew, Photoshop, Pixelmator, Gimp, just to name a few.
But once you have a watermark image, you can add it to an image, when you export from Aperture. Add the watermark to one of the Export Presets. You will need to create your watermark in different sizes, so you can add it to each of the export pixel sizes for your images, that you are using.
Another possibility would be using the BorderFX plugin. This versatile plug-in also supports to add graphic overlays to your images, either when exporting or as an Edit plug-in. http://www.iborderfx.com/BorderFX

Creating and using a calculated field in business rule from the currency conversion of another field.

Similar Messages

Maybe you are looking for