Creating and using Buttons in InDesign - Help!

InDesign CS5 (V7.0.3), Mac 10.6.8
I have a 23 page InDesign document. On the bottom left corner I have a button to go to previous page, bottom middle I have a button to go to the table of contents on page 2, bottom right corner I have a button to go to next page. I export to PDF (interactive). When I open the PDF the Go To Next Page is in the middle of the document and the Go To Table of Contents is half-way off the left hand side of the document (the Go To Previous Page is not visible). Any thoughts?

Arrrrrrrrrgggggghhhhhh!
I KNOW replace/restore preferences is the first step when something hinky is happening. Why didn't I try that?
Thanks Steve.
Till next time!

Similar Messages

HOW TO CREATE and USE EVENTS IN WORKFLOWS .

HOW TO CREATE and USE EVENTS IN WORKFLOWS with the help of classes.
What i am doing is..
open se24
event tab->event name->parameters
method tab->method name->event handler->copy parameters
interface tab->if_workflow->enter
tell me what else to do step by step
Another important thing is that HOW to use these class events to trigger the workflows.
REPLY ASAP
THXS IN ADVANCE

Hi,
Pl. see this blog...
Raising ABAP OO events for workflow
Regards,
JOy.

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

One structure is created and using in 3 queries, i want to modify that stru

hi gurus,
one structure is created and using in 3 queries, i want to modify that structure in only one query but it will not effect other two.wat should i do for that?
thanx in advace,
i will assign points,
srinivas.

Hi srinivas,
This scenario could be frequently seen in a project. I assume the structure you mentioned is saved as a global structure, then in the query which you want to modify, right click on the structure and choose "Remove Reference". This function copies the global structure to a local one, in which you can change it and the other two won't get affected.
Hope this helps.
Regards,
Aaron

Difference b/w create and createInsert button

hi,
what is the difference b/w create and createInsert button in ADF data control.

first go through
https://forums.oracle.com/forums/ann.jspa?annID=56
next look
http://jjzheng.blogspot.in/2010/04/create-or-createinsert.html
ADF Faces & BC: Difference between Create and CreateInsert.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

How to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

how to Create and use of Coherence servers in weblogic serevr 11g (10.3.6)?

See the below discussion
How to create and use Webservice controls using WSDL in weblogic portal10.3
Thanks,
Venkat Sarvabatla

Can I create and use more than one repository on OVM 2.1.5

The version of Oracle VM I am using is 2.1.5 .
I wonder can I create and use more than one repository on OVM 2.1.5. Because I want to install different GOS on different disks.
I know in Oracle VM 2.2 we can use following commands to realize that.
a. #/opt/ovs-agent-2.3/utils/repos.py –n /dev/mapper/mpathxp1
b. #/opt/ovs-agent-2.3/utils/repos.py –r UUID
c. #/opt/ovs-agent-2.3/utils/repos.py –i
And other repositories can also be mounted and found under /var/ovs/mount/UUID.
But in Oracle VM 2.1.5, seems just one repository can be created and mounted. For example:
At first, I create a repository using mpath1p1:
a. # mkfs.ocfs2 /dev/mapper/mpath1p1
b. #/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath1p1 C "cluster root"
c. I can find the repository has been mounted under /OVS.
But if I want to use "/usr/lib/ovs/ovs-makerepo /dev/mapper/mpath2p1 C "cluster root" to create another repository, and check the mount status using command "mount", these two disks are all have been mounted under /OVS.
"# cat /etc/ovs/repositories", only mpath1p1 with UUID was recorded there.
After reboot, only repository with mpath1p1 was mounted under OVS.
Can anyone tell me how to use more than one repositories on OVM 2.1.5. Do I have to install all the GOSs on the same disk and repository.
Thank you very much.

Now I've known how to create different repository. They will be mounted under /OVS/UUID. Thanks.

SQL08 Need example of creating AND using a Fact (degenerate) dimension

Can someone post a link to some examples of setting up and using a Fact (degenerate) dimension. Ive got the SSAS 2008R2 Adventureworks DW project setup and I see a few Fact dimensions in there, but id like some descriptions to go along with this or
something similar.
My scenario:
Orders - attributes include : Order#, OrderStartDate, SalesPerson, BusinessType, MarketType
OrderTransactions - attributes include: OrderKey , TransactionAmount, TransactionType, TransactionDate, AccountKey
Description:
Its more or less the typical Order > Order Detail type scenario, with the addition of Orders have some additional attributes.
So I want to be able to measure on for example:
Order counts - broken down by BusinessType and MarketType , and then within a date range
Revenue - which will be totals of transaction amounts, again grouped by BusinessType and MarketType, but also be able to drill down to see the related Order#

Hi Shiftbit,
According to your description, you need some examples about create and use degenerate dimensions, right?
Degenerate dimensions, also called fact dimensions, are standard dimensions that are constructed from attribute columns in fact tables instead of from attribute columns in dimension tables. Here is document that describes how to create and use degenerate
dimensions step by step, please refer to the links below.
https://msdn.microsoft.com/en-us/library/ms167409(v=sql.100).aspx
http://www.jamesserra.com/archive/2011/11/degenerate-dimensions/
Regards,
Charlie Liao
TechNet Community Support

The buttons in main the vi get locked after opening a vi reference in a subpanel and using buttons within the subpanel.

I am trying to open a reference to a vi in the subpanel of the main vi. However after the vi opens in the subpanel and after pressing a few buttons in the subpanel the buttons in the main vi get locked, i.e. I can't even close the main vi or control anything else. Is there any way how I can avoid this happening?

> The buttons in main the vi get locked after opening a vi reference in
> a subpanel and using buttons within the subpanel.
>
> I am trying to open a reference to a vi in the subpanel of the main
> vi. However after the vi opens in the subpanel and after pressing a
> few buttons in the subpanel the buttons in the main vi get locked,
> i.e. I can't even close the main vi or control anything else. Is there
> any way how I can avoid this happening?
This is most likely happening because in either the top or sub panel,
there is an event structure that is queuing events, and is set to lock
the panel until the events are handled, and because of the logic in the
diagram, the events aren't being pulled from the queue.
So, you have a deadlock. You are waiting
on the panel. The panel is
waiting on the diagram. And the diagram is waiting on something else.
So, if there are indeed event structures involved, determine where in
the diagram things are delaying. Also, if you do not need the panel to
lock until the event is handled, you can change the setting in the
events dialog on the structure. But the events will still be queued
until the diagram starts executing.
Greg McKaskle

How do I create and use a watermark in aperture?

Hello there!
How to I create and use a watermark in aperture? do I need to download a 3rd party plugin? Any recommendations?
Thank you!

Aperture does not support the creation of watermarks; if you want a watermark image with transparent regions you need an application that can handle alpha channels - Prewiew, Photoshop, Pixelmator, Gimp, just to name a few.
But once you have a watermark image, you can add it to an image, when you export from Aperture. Add the watermark to one of the Export Presets. You will need to create your watermark in different sizes, so you can add it to each of the export pixel sizes for your images, that you are using.
Another possibility would be using the BorderFX plugin. This versatile plug-in also supports to add graphic overlays to your images, either when exporting or as an Edit plug-in. http://www.iborderfx.com/BorderFX

How do I create and use a ringtone without syncing and without jailbreaking?

How do I create and use a ringtone without syncing and without jailbreaking?

You create ringtones on your computer and sync them to your iphone.
You can buy ringtones from the ringtones section (at the bottom of the screen when you open itunes) of the itunes app on your iphone.
There may be apps that will do this - not sure.

Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?

Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Creating and using Buttons in InDesign - Help!

Similar Messages

Maybe you are looking for