Creating animated Banner to import into Dreamweaver. Help!

Hello All,
I am attempting to create a page banner that consists of 4 images which I would like to change every 250ms. I would also like to have 4 small slaces that when hovered the relevant image loads.
I have set this up with behaviours on 4 states (image on each state) so that when the mouse is rolled over the relevent slice the image changes to a different state.
I have also set the timer on each state to change every 250ms.
The trouble is when I export this as HTML in copy into Dreamwever it only imports the first state image with no functions. If I try to import this as flash the images simply flick through quickly in a loop with no function.
Can anyone help please!

For an illustration of my problem, here is a most simple file that I created:
http://www.cad6.com/archive/Merge1.u3d
This file opens correctly in SAP Visual Enterprise Viewer 7.0, but not in Acrobat XI Pro. A similiar file destilled from a sample file found on the web, however, works:
http://www.cad6.com/archive/Merge2.u3d
The only difference I can see is that is uses compression and a CLOD Progressive Mesh Continuation instead of a CLOD Base Mesh Continuation. But according to the latest version of "U3D Supported Elements", this should not make any difference.
Any idea why Merge1.u3d does not open? Please?!
Best regards
Stefan Malz

Similar Messages

Creating animations that will import into FCP

What are some program options for creating and manipulating objects like squares, rectangles and circles that will be used for creating animations to be imported into protions of FCP projects. The final output will be DVD's. Director MX2004 works very well for creating the animations, however when converted to a QT movie and imported into FCP, the animations look like a copy of a VHS tape. (Export settings were component video.) The animations are not acceptable when viewed on both a TV and NTSC monitor. Is anyone successfully using Director for such an application? I would certainally appreciate any suggestions.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

I agree about the material that is coming out of Director being the problem.
The fundamental questions is "is Director capable of this kind of output?"?? I was hoping someone would tell me "this is how I did it" or "It is impossible using Director". All I know is there was some animation from Director in at least top movie a couple of years--I don't remember its name. So someone was able to get animation out of Director good enough for the film industry!
As for other questions you posed. The vector graphics I need can be created and manipulated as I need in Director. The whole project could be done in Director and outputed as a cross platform "projector" from a Mac or PC version of Director. However, there some issues with keeping things "in time" using Director. Using Director for the whole project is "plan B".
With regards to your other questions. In short, I want to animate some very detaliled shop type activities that are hard to video and understand. The animations will compliment the video and will show/simplify concepts needed to learn particular shop skills.
I want to make and market a series of DVD on these shop activites. Yes I know it is not a small project. I have been working on problems relating to everything from copyrighting to the insurance/liability aspects for several years. I also have the hardware & software to make DVD "demos" and examples to "show and tell". Now I need some help getting the stuff to do what I want/need!
FCP is the best option for "putting together" audio, video and amimation before making a DVD.
Thank you for your input.
G5 2 X 2 Mac OS X (10.3.9) G4 15" Power Book

Swf's/flash,banners When Importing Into Dreamweaver Put Out Slices..

Hi guys/gals
I think im doing it wrong or missing something, even have a funny feeling i might have to use some css? Not really sure.
My problem is after i have saved my move,banner - when imported into dreamweaver it puts all the slices out of whack ?
I cant find anywhere to import it into my photoshop layout, can't "Bring to front" in dream weaver <- ? :/
I have searched everywhere and I can't find with my terms what im looking for..I figure if nothing is coming up then im going about this
the wrong way
Any help would be muchly appreciated.
J

Hi
Slicing images from a photoshop comp and then creating a web page from them is never a good idea, and will present many compatibility problems for you. A better alternative is to use css based layouts, this does not mean that you must forget what you have done in photoshop just that the procedure is probably slightly more complex for someone who has not used css layouts before,
A good place to start would be the css basics tutorial then the, using css starter pages tutorial from the tutorials shown on this page - http://www.adobe.com/devnet/dreamweaver/css.html.
(the 2 tutorials mentioned are - http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt1.html, and http://www.adobe.com/devnet/dreamweaver/articles/table_to_css_pt2.html.
There is also a number of videos that may interest you at - http://tv.adobe.com/product/dreamweaver/.
PZ

Can I develop a site using Bootstrap and then import into Dreamweaver to update to the free Business Catalyst hosting?

Can hand generated code be imported into Dreamweaver in order to use the free hosting option?

BC provides you templates to use to modify and sell to a client. Otherwise, they wouldn’t be there. For example, the templates are offered when you go to create a new site. BC asks if you want to use a template, import a site, etc… so your analogy doesn’t apply in this situation.
TRACI STEIN

Layering content box under a framing image (slicing a Photoshop PSD and importing into Dreamweaver)

Hi,
I am slicing a Photoshop PSD document and importing into Dreamweaver. Is Dreamweaver able to handle Layered content in the same as Photoshop so that the content box can be Layered below a Decorative Frame. As there will be multiple Images I want to be able to have a content box Layered below the frame, rather than have to make a separate page for each photo in the gallery.
Hope this makes sense. Any pointers gratefully received.
J

No.
Yes.
I regularly receive layered PSD files for web work. The layers allow me to just select one element at a time so that I can complete the pages as the designer wanted me to.
One may have "layers" in a website, but the method is wonky at best and will destroy the flow of a good HTML page, causing rendering problems at worst. You need to think of a website as a 2D object, especially when you are starting out.
If you have elements that need to be "on top" of another element, you'll need to create a div that is within a div, with your inside content inside the outer div. And think of a div as a rectangular area that holds stuff, like pictures, text, colors and graphics.
Layering on websites is usually achieved using JavaScript or AP divs. An Absolutely Positioned div will tend to destroy the normal flow of your HTML, which is why it is recommended only in certain very special cases. If you are just starting out, you need to understand how to construct a 2D web page using HTML and CSS first.

Flash menu bar's hyperlink doesn't work after imported into dreamweaver

I have major problems when I tried to import a flash menu bar with hyperlink (created in flash) into dreamweaver. I have 5 buttons in the same flash banner file and each button is supposed to have its unique hyperlink. None of these 5 hyperlinks is working, but it works fine if run by the .swf file alone. What could I have done wrong in flash or dreamweaver?
Version Flash CS4, Dreamweaver CS4
Please help....thank you in advance.
Kind regards,

Hi Hans-G,
Problem only exist on Windows 7 system, working fine in XP. Thanks for yr hep!

I imported video from a card into IPhoto and it plays in slow motion. Any suggestions? Would importing into IMovie help at all?

Hello
I am importing video and pics into Iphoto and the video plays in slow motion. Would importing in Imovie help or does it have something to do with the type of camera or file the video is in?

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Is there a licensing limit on PDF's created in Acrobat and imported into FormsCentral?

Hello,
I have been looking at the forums and also chatted with someone from tech support. I have created a PDF in Acrobat Professional. I have not enabled Reader Extensions on the file. I imported it into FormsCentral and added a submit button. To test it, I filled it out and saved it successfully using Reader 9. I also submitted it successfully using the submit button. I do not yet have a paid FormsCentral account, but see that the Plus account allows 5000 submissions per form. This is not a licensing limit, but a space limit (see http://forums.adobe.com/docs/DOC-1382). I also understand there is a 500 use licensing limit on PDF's that have Reader Extensions enabled. Does that apply to an imported PDF with no Reader Extensions enabled? Please clarify.
Thanks!

Hello Gen,
Thank you for your reply. I have seen many discussions on these forums, as well as elsewhere on the internet regarding Adobe's licensing limit on fillable PDF forms created in Acrobat that have Reader Extensions enabled. We are only allowed to extract 500 responses from Reader Extended PDF's, according to this limit.
I wanted to confirm if this is applicable to a PDF I create in Acrobat Pro (without the Reader Extensions enabled), then imported and submitted through FormsCentral using a Plus account. You are saying that FormsCentral adds the Reader Extensions. Does that mean that the PDF is now subject to Adobe's limit of 500 on Reader Extended PDF's? Or does the fact that the PDF form is submitted through FormsCentral eliminate the limit of 500?
I just want to be sure that we can go ahead and send out a fillable PDF through FormsCentral without worrying we are exceeding the licensing limit.
Thanks again!

Flash code into Dreamweaver - Help please!

I am using GoDaddy for my hosting account. It is on a linux
server. I have created an HTML page and loaded it up to the
internet using Dreamweaver, like I normally do. the page in
question is
http://www.desmoinesbilliards.com/gallery.html
When I use dreamweaver to insert the flash movie, it
transfers it as normal, but it will not show up on the website. The
flash movie works fine on the server, just cannot be seen on the
site. I called Go Daddy who said that there is a problem with the
way the code is calling up the Flash movie. I have not altered it
at all from the way that Dream weaver inserts it. The flash movie
is located in a folder on the site called 'flash'. The code is
below. I can't figure it out, any help would be appreciated. The
code that dreamweaver inserts is below. By the way, I use
Professional 8 version of both products.

Upload the scripts folder that DW places in your local site
when you insert
Flash on a page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"JesseDSM" <[email protected]> wrote in
message
news:[email protected]...
>I am using GoDaddy for my hosting account. It is on a
linux server. I
>have
> created an HTML page and loaded it up to the internet
using Dreamweaver,
> like I
> normally do. the page in question is
>
http://www.desmoinesbilliards.com/gallery.html
When I use dreamweaver to
> insert
> the flash movie, it transfers it as normal, but it will
not show up on the
> website. The flash movie works fine on the server, just
cannot be seen on
> the
> site. I called Go Daddy who said that there is a problem
with the way the
> code
> is calling up the Flash movie. I have not altered it at
all from the way
> that
> Dream weaver inserts it. The flash movie is located in a
folder on the
> site
> called 'flash'. The code is below. I can't figure it
out, any help would
> be
> appreciated. The code that dreamweaver inserts is below.
By the way, I
> use
> Professional 8 version of both products. <script
type='text/javascript'>
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','730','height','80','src','flash/leaguebanner','qualit
> y','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','f
> lash/leaguebanner' ); //end AC code
</script><noscript><object
> classid='clsid:D27CDB6E-AE6D-11cf-96B8-444553540000'
> codebase='
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0' width='730' height='80'> <param
name='movie'
> value='flash/leaguebanner.swf' /> <param
name='quality' value='high'
> />
> <embed src='flash/leaguebanner.swf' quality='high'
> pluginspage='
http://www.macromedia.com/go/getflashplayer'
> type='application/x-shockwave-flash' width='730'
height='80'></embed>
> </object>
>
> <script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=7,0,19,0','width','730','height','80','src','flash/leaguebanner','qualit
> y','high','pluginspage','
http://www.macromedia.com/go/getflashplayer','movie','f
> lash/leaguebanner' ); //end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=7,0,19,0" width="730" height="80">
> <param name="movie" value="flash/leaguebanner.swf"
/>
> <param name="quality" value="high" />
> <embed src="flash/leaguebanner.swf" quality="high"
> pluginspage="
http://www.macromedia.com/go/getflashplayer"
> type="application/x-shockwave-flash" width="730"
height="80"></embed>
> </object>
>

Gah - Fireworks into Dreamweaver help

Ive done it before. What i have is a map of queensland
(australia), and on particular sections there are drop down flashy
menus that show the names of cities. I have linked all the cities
and such to websites, now its a matter of uploading it to
dreamweaver. Everytime i export to dreamweaver, and then Import
Fireworks HTML on dreamweaver, the splices appear perfectly fine,
but the map of queensland doesnt appear at all. instead, i get
stupid little 'broken image' symbols.
I dont know what is so different to this from last week. last
week i did the same thing, except with an australia map, and it
worked perfectly fine.
What am i doing wrong?!
Help! lol

Ive done it before. What i have is a map of queensland
(australia), and on particular sections there are drop down flashy
menus that show the names of cities. I have linked all the cities
and such to websites, now its a matter of uploading it to
dreamweaver. Everytime i export to dreamweaver, and then Import
Fireworks HTML on dreamweaver, the splices appear perfectly fine,
but the map of queensland doesnt appear at all. instead, i get
stupid little 'broken image' symbols.
I dont know what is so different to this from last week. last
week i did the same thing, except with an australia map, and it
worked perfectly fine.
What am i doing wrong?!
Help! lol

"Manually" creating U3D files to import into Acrobat XI

Has anyone here ever successfully tried to "manually" create a U3D file and open it in a Acrobat XI to save it as a PDF file?
I am currently coding an U3D export filter for our self-developed CAD application. The resulting files (containing simple polygon meshes) can be opened and displayed by a commercial U3D viewer (SAP Visual Enterprise Viewer 7.0), but Acrobat X and Acrobat XI cannot open them. They only display useless standard "Unable to open" message.
Sample U3D files from the web open correctly in Acrobat XI although I fail to see any relevant difference when comparing them to the files my filter creates.
Our U3D files only feature a default view and a few, simple polygon meshes created using CLOD Mesh Declaration and CLOS Base Mesh Continuation. Everything is correctly contained in modifier chains. The file does not use compression.
I checked the "U3D Supported Elements" documents from Adobe and I'm sure to have met all conditions therein.
Any help or tip would be very much appreciated because I am out of ideas what to try...
Best regards
Stefan Malz

For an illustration of my problem, here is a most simple file that I created:
http://www.cad6.com/archive/Merge1.u3d
This file opens correctly in SAP Visual Enterprise Viewer 7.0, but not in Acrobat XI Pro. A similiar file destilled from a sample file found on the web, however, works:
http://www.cad6.com/archive/Merge2.u3d
The only difference I can see is that is uses compression and a CLOD Progressive Mesh Continuation instead of a CLOD Base Mesh Continuation. But according to the latest version of "U3D Supported Elements", this should not make any difference.
Any idea why Merge1.u3d does not open? Please?!
Best regards
Stefan Malz

Having trouble creating a PDF to import into Acrobat from Livecycle.

My Livecycle document saved as a pdf can't be read by Acrobat. I need to add text to a pdf that can't be read by Acrobat, but can be read by Livecycle. I would like to import to Livecycle and save as a pdf that can be read and modified by Acrobat. Any suggestions will be appreciated.
Thanks

Once you have the WORD file in a PDF as you have done, try the Forms>Start Form Wizard (assuming you have this on the MAC). As I understand it, you can not create a PDF from DOC within Acrobat on the MAC since it requires PDF Maker that is not part of the MAC Acrobat system. Some MAC users should be by eventually to clarify or correct my comments.

Import into Dreamweaver

Do these forms in formCentral have HTML/CSS codes attached to them?

You can use the embed code provide on the Distribute tab to embed your form into your web page (just like you do for a YouTube video).
You should also check out this FAQ: http://forums.adobe.com/docs/DOC-1991
Randy

Importing photoshop metadata into dreamweaver

is there a way, for example, for the description field in the photoshop metadata for an image be imported into dreamweaver with the image?
thanks

Hi
Currently there is no way to do this, but for future reference css3 and html5 will both support this feature.
PZ

Problems Importing Files Into Dreamweaver

I have previously imported files in Dreamweaver by dragging them from my desktop & dropping them into my websites local files. Suddenly today, I can't get any files to import into Dreamweaver. I am using Dreamweaver 13.2 on a Mac with OS 10.9.2.

Nothing. I drag the files from my desktop to the target folder in Dreamweaver, and nothing happens. I have tried shutting everything down & bringing it all back up, and I have also tried re-saving the file to the desktop. I was putting an html file into Dreamweaver when I noticed it wasn't working, so I tried a Word doc & PDF, all with same results. Out of desperation, I just tried re-synching my website, but (as I expected), nothing changed.

Creating animated Banner to import into Dreamweaver. Help!

Similar Messages

Maybe you are looking for