Creating animation on a MAC...

With PSE 10 on a PC, I can create an animation file using the burst pix from my camera that runs on the Internet Explorer.
I don't seem to find any info on how to do this on a MAC with PSE 11 installed.
Note: For extra points, where can I find any training (online preferably) about PSE 11 training for a MAC?
Thx.
--- Rion

You can create an animated gif file in PSE with your layers as per the steps below:
Create an animated GIF
Place the images you want to appear in each frame of the animation on separate layers of the Layers panel. For example, to create an animation of an eye blinking, you would place an image of the open eye on one layer, and an image of the closed eye on another layer.
Choose File > Save for Web.
Note:  If your image has multiple layers, you can also open the Save For Web dialog box from the Save As dialog box by choosing CompuServe GIF Format and selecting Layers As Frames. 
Optimize the image in GIF format.
Select Animate.
Set additional options in the Animation section of the dialog box:
Looping Options
Continuously repeat the animation in a web browser, or animate only once. You can also choose Other to specify the number of times the animation must loop.
Frame Delay
Specifies the number of seconds that each frame is displayed in a web browser. Use a decimal value to specify fractions of a second. For example, use .5 to specify half a second.
Fore more info you can browse help link here http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f-118f00f612e28b29a0a -7fff.html#WS287f927bd30d4b1f-118f00f612e28b29a0a-7ff2.
For PSE training or learning videos here is how you can start with:
http://tv.adobe.com/show/learn-photoshop-elements-11/
http://helpx.adobe.com/photoshop-elements.html
Hope it helps.
Thanks,
Garry

Similar Messages

  • Creating animations that will import into FCP

    What are some program options for creating and manipulating objects like squares, rectangles and circles that will be used for creating animations to be imported into protions of FCP projects. The final output will be DVD's. Director MX2004 works very well for creating the animations, however when converted to a QT movie and imported into FCP, the animations look like a copy of a VHS tape. (Export settings were component video.) The animations are not acceptable when viewed on both a TV and NTSC monitor. Is anyone successfully using Director for such an application? I would certainally appreciate any suggestions.
    G5 2 X 2   Mac OS X (10.3.9)   G4 15" Power Book

    I agree about the material that is coming out of Director being the problem.
    The fundamental questions is "is Director capable of this kind of output?"?? I was hoping someone would tell me "this is how I did it" or "It is impossible using Director". All I know is there was some animation from Director in at least top movie a couple of years--I don't remember its name. So someone was able to get animation out of Director good enough for the film industry!
    As for other questions you posed. The vector graphics I need can be created and manipulated as I need in Director. The whole project could be done in Director and outputed as a cross platform "projector" from a Mac or PC version of Director. However, there some issues with keeping things "in time" using Director. Using Director for the whole project is "plan B".
    With regards to your other questions. In short, I want to animate some very detaliled shop type activities that are hard to video and understand. The animations will compliment the video and will show/simplify concepts needed to learn particular shop skills.
    I want to make and market a series of DVD on these shop activites. Yes I know it is not a small project. I have been working on problems relating to everything from copyrighting to the insurance/liability aspects for several years. I also have the hardware & software to make DVD "demos" and examples to "show and tell". Now I need some help getting the stuff to do what I want/need!
    FCP is the best option for "putting together" audio, video and amimation before making a DVD.
    Thank you for your input.
    G5 2 X 2   Mac OS X (10.3.9)   G4 15" Power Book

  • I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files?

    I received a psd file created in CS6 for MAC, I am unable to find the layers when I open it in photoshop in Windows. What can i do to edit the files? What can be done so that I can either open and see the layers or how can the sender save it in a way that it doesn't "merge" the layers in some way to just one?

    Could try saving as tiff provided layers and transparency are chosen at the time of saving. But it's hard to give a definitive answer as it depends on the final usage. For example PSD's tend to work better in applications like In Design in comparison with tiff.

  • Create animated gif s?

    Is there any such thing to create an animated gif? Something like a javax.imageio.ImageWriter implementation?
    It should be a simple routine for putting some 3 to 5 Images together and publish them...
    Thanks in advance,
    Sebastian

    Gif4J Library (http://www.gif4j.com) is the best solution to create animated gifs. Supports ImageIO and much more.

  • Creating animations with transparent backgrounds?

    I'm running into some problems when using After Effects to create animations with transparent backgrounds for Keynote...
    I use animated gifs and short quicktime movies with uniform backgrounds as source files, use color keying to take out the backgrounds, preview them to see if they look OK, render the results as RGB+alpha, and... they don't show up as transparent in Keynote. They work in Powerpoint, however. I've tried outputting as .mov, as .gif, as premultiplied vs straight alpha... no joy. Can someone explain (or point me to an explanation) of how Keynote differs from other programs in its handling of transparency? What am I missing?

    Using a TYPE_INT_ARGB BufferedImage worked beautifully. I had played around with Image for hours, but it never occurred to me that BufferedImage would be needed. :)
    many, many thanks,
    Steven

  • Creating a folder in Mac os

    HI all,
    How to create a folder in Mac os using java ? In windows i use
    Runtime rt = Runtime.getRuntime();
    Process proc = rt.exec("cmd.exe /c mkdir directoryname");
    Please help me....
    Thanks in advance
    Ravi

    Hi Ravi,
    I saw your post and question,. The way you said u create a folder in windows using the Runtime class is somehow cumbersome and reduces platform independence. Even some versions of Windows may not recognize cmd.exe.
    Why not just use the mkdir() method of the File class? This create a new directory and I believe this should work in Mac too though I did not really test it. But I believe it should work. The code will look like this:          File f = new File("dirname/");
             f.mkdir(); The dirname may be absolute, and may or may not end with a /.
    I hope this soles your problem.

  • Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?

    Is there any way to create an installer for Mac OS and Linux OS once a stand alone application is created?  I have created an executable application that I want to distribute to Mac and Linux users (different applications were created in the respective OS).  I was wondering if there is any way to create an installer?  I think there probably isn't...  If the user were to simply download the Labview Run-time Engine from ni.com would they be able to run the application or is it more complicated than that?
    Thanks so much for your time.

    I think Shane tried to say, that it is on the Mac OS X installation DVD, NOT the LabVIEW for Mac OS X installation medium. And that could very well have changed in recent Mac OS X versions as well. They used to have Xcode on it too, but that seems gone as well.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Creating Animations with Project ROME

    Have you seen the animation clips (Create New > Animations > Anim Clips)?  If so, this is just the tip of the iceberg of what you can create yourself!
    You can animate just about anything you create or bring into Project ROME! So, we want to know if you've created an animation yet and have anything you could share. If not, can we inspire you with a challenge?
    With Thanksgiving right around the corner, we thought it would be really fun to create animated Thanksgiving e-card invites. Begin brainstorming ideas for your animation and start using the tools to see your animation come to life!
    Don't hesitate to post your wonderful creations to the Exchange. Tell us about your process, what you loved and if you ran into any problems. Good luck and have fun!

    I created an animation/presentation project for students "Shapes_Project1" and posted to the ROME template exchange and to edexchange.adobe.com. It is designed to show students the function of the transform panel and how simple shapes can be changed and animated. It also gives the students an opportunity to create pages to demonstrate their understanding. Let me know what you think.

  • How create animation in oracle forms 6i

    any one can guide me how create animation in oracle forms 6i

    hello to every one..
    my dear friend developer is a busniness application tool.you can create
    animaiton on flash and other animaiton softwares and then you can call on froms.
    best regard
    amk

  • My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

    My current os x is 10.9.5, using final cut express vers. 4.0.1.  I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project.  After doing this I took selected clips and put those edited clips on the fce timeline.  When playing the video back in the fce timeline,I noticed
    1) the video wasn't playing back smoothly like the original content
    2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio.  I exported to quicktime just to see if that was consistent, it was.
    When I play the converted quicktime content independently of fce,  it plays normally (no sputtering of timecode, video and audio.  Need help to resolve the sputtering playback of converted video content in the fce timeline.  I've never experienced this before.  Any suggestions?

    When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly?  If not, go back and convert the original files again, using the intended Sequence settings as a guide.
    -DH

  • Pdf creator is creating corrupt file on Mac with Mountain Lion

    pdf creator is creating corrupt file on Mac with Mountain Lion, how to rectify?

    Please say what PDF creator you have including version
    and how you know they are corrupt

  • What are all the different methods/tools for creating animations that work in IBA?

    I've been developing HTML5 animations in Sencha and attempting to use the HTML widget in IBA.  It's not going as seamless as I was hoping, and I was wondering if there are better methods/tools to create animations for IBA.  In my opinion, the primary limitation is not in Sencha itself, it's more in the widget functionality in IBA. 
    I want the entire page to be an animation and drive the user experience, basically.  Currently in IBA, the widget allows for successfully importing an HTML5 animation, but in more as a complementary role to the page instead of the primary content. 
    Any ideas?

    Thanks Fabe - I agree 100%.  However, in order to make fully dynamic books, animations can play a great role in bringing a book to life.  (Admittedly, I may have to just build an app for what I'm trying to do)
    Anyone else have any thoughts?

  • HT201301 Can vmware player be used to create windows pc and mac.  Will I need any other software or hardware to do that?

    Can vmware player be used to create windows pc and mac.  Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)

    Since you posted this in the iPod Touch forum and didn't provide enough information to contradict that I am going to say the it can't be done. VMWare does work in iPods.
    Allan

  • Failed to create a user with Mac Mini Server, the message "Failed to process the command writesettings" in the module "servermgr_sharing"

    Failed to create a user with Mac Mini Server, the message "Failed to process the command writesettings" in the module "servermgr_sharing"

    I have a Mac Mini with OS X Server 10.8.5 and Server 2.2.1 and have a problem to share the public folder.
    When I enter the Server application to indicate that I want to share the public folder on the network and assign user I get the following message appears
    And I can not share the folder.
    If I go from my i-mac get mac mini server view and access the public folder, but I can not open any of the files there.
    That I can do to fix this?
    thank you very much

  • Web gallery name created on export too .mac is too long - how do I shorten?

    I cannot work out what the steps would be to reduce the eventual web address that I am given when I publish a web gallery from Apertue.. I want to put the address into a domain web forwarding so that I can give a short neat address for people to see but I cannot figure out how to reduce the .mac web gallery link address?
    Can anyone help? Assume I am an idiot.. the clearer and more comprehensive the steps the better!
    I have been messing about with batch change metadata settings for ages but can't see how to do this.. Thank you!

    Apologies.. my advice may have been wrong.. it is a while since I figured it out.. trying to remember what it was I did..you do have to shorten that file name.. but it may not be the caption you need to change. I suspect I may have selected all the images.. then gone to meta data batch change and done something under the custom button which then applied to all images.
    In my case I needed to get the web address for the gallery created from:
    http://homepage.mac.com/farish/Smartbins™%20Chewing%20Gum%20Bin%20and%20Cigarett e%20Bin%20Image%20Gallery/
    down to:
    http://homepage.mac.com/farish/Chewing%20Gum%20Bin%20Cigarette%20Bin/
    I did manage it but can't quite remember how I did it.
    I will keep playing and when I figure out what I did that worked will post again.
    The web gallery name you choose affects how Google sees the site as when you publish the web gallery - the web gallery name can pop up in Google
    It's quite difficult to figure out exactly what to do. If anyone else knows a definitive answer please advise!
    Rgds

Maybe you are looking for