Creating app update version from web server
hi...
is there any tutorial that i can refer for version update application from web server? for example if there's already an application running on the handphone and there is new version for that application. how can i upload a new version application automatically from web server? thanx in advance...
Hi
See this topic: http://www.j2meforums.com/yabbse/index.php?board=2;action=display;threadid=9851
mihai
Similar Messages
-
Need Help Streaming Video From Web Server Built Into Application - Linksys WRT54g Router
Very much appreciate any help getting streaming video feed from web server built into video application to work properly using port forwarding on my Linksys WRT54g wireless router.
Here is the situation:
My PC is connected to the internet via a Linksys WRT54g wireless router.
The Windows XP Pro SP2 firewall is enabled, with a firewall exception established for the video camera application.
On the router, forwarding of port 80 is enabled for the LAN IP address of the PC running the video application with an embedded web server, and the web server in the video camera application is also set to use port 80.
I have a free DYNDNS account and also run the DYNDNS updater program on the PC running the video application with embedded web server. According to the DYNDNS web site and the DYNDNS updater program, the IP address assigned to the machine running the video application with embedded web server is set correctly in my dyndns account.
When I open a browser (Explorer or Firefox) on the PC running the video camera application with embedded web server, I am able to connect to the video application's web server by going to the dyndns address linked to the machine running the video application. The video application's web server is set to use the dyndns address. That's the good news. The bad news is that I can't connect to the video application's web server from any machine that connects to the internet that uses a router other than the router used by the PC running the video application. I am only able to connect to the streaming video from the application's web server only on machines that connect to the internet using the same (home) router used by the PC that is running the video application.
Since I am able to connect to the video app's embedded web server successfully on the machine running the video application, it seems that at least something about the current port forwarding settings is correct. For example, if I uncheck 'enable' for forwarding of port 80 on the router settings page, I am no longer able to connect to the video app's web server when I try to do so in a browser running on the machine running the video app. When I re-enable port 80 forwarding on the router, I am again able to connect to the web server of the video application on the machine running the video app. I thought that by enabling forwarding of port 80 on the router and associating that port with the LAN IP of the machine running the video application, it would be possible to connect to the streaming video of the video app's embedded web server from ANY machine connected to the internet, but that is not the case. There must be some other router settings to update/change in order to get the port forwarding working to enable a successful connection to the video web server, but I am stumped. Very grateful for any suggestions as to how to get this working properly.
Thanks in advance...The firewall log can be configured on the third tab in the window for the firewall settings, where you can turn the firewall on and off completely.
From your tests, though, it does not seem to be the firewall. However, to be sure, it would be good to check the log. It will help to eliminate the firewall as the culprit and you may find it handy in the future, too. ;-) Just don't forget to turn the log off again after you are done because it may cause some performance penalty on your system while on.
From what you write, it seems as if I should give a little networking background on the ip addresses you'll see. Your setup is (or should be) a modem connected to the WAN/Internet port of the WRT. The computer is connected into a LAN port of the WRT.
Your router has two IP addresses (that's what makes it a router): a WAN address and a LAN address. The WAN address is the address assigned by the ISP. It is a normal internet IP address. Everyone is able to send packets to this IP address. The WAN address is the one reported by whatismyipaddress.com, it should be listed in the dyndns record and it is the address that your router shows on the Status page. It's the public IP address of your router. Dyndns maps your dyndns.org name to that IP address.
Your router also has an IP address on the LAN side. You can configure it to be whatever you want. The default is 192.168.1.1 with netmask 255.255.255.0 and it is better to leave it like that or at least inside the network 192.168.*.*. 192.168 is a special, reserved IP address range for private networks. Basically, routers in the internet are not supposed to forward addresses in this range. That makes them suitable for private LANs as the packets never can get anywhere. Most people using Linksys routers have there LAN in 192.168.1.*.
The router acts as gateway, which means it forwards packets from PCs in the LAN to the internet and back. As all your PCs in your LAN share a single WAN IP address, the gateway does address translation (NAT). This works only in one direction: from the inside to the outside. The router remembers when a PC in your LAN sends something out and accepts the responses in and sending them back to the PC. If something comes in from the internet which cannot be associated with a ongoing communication the packet is dropped unless you use port forwarding.
All computers in your LAN either have a static IP address assigned or use DHCP to get it automatically. The router has a DHCP server as well which gives out IP address from 192.168.1.100-149 if not changed. With a router with default settings static IP addresses can be in the range of 192.168.1.2-99 and 150-254.
ipconfig /all reports your IP address in your LAN, i.e. an address 192.168.1.*. The gateway in this output should be 192.168.1.1 which is your router. And packet no in the LAN address range 192.168.1.* is send to the router which forwards the packets into the internet.
An address 192.168.1.* should not appear as internet address in the Status page of the router nor should it appear at dyndns.
Port forwarding is used to operate a server in the LAN. By default, a server in the LAN cannot be reached from the internet. You have to configure port forwarding for this. You configure that traffic bound for a specific port (e.g. TCP port 80 for http) on your WAN IP address is forwarded to the same port on a specific LAN IP address. If your server runs on 192.168.1.50 than traffic to your WAN IP address port 80 is forwarded to 192.168.1.50 port 80. That way your HTTP server can be reached from the internet. As you can only configure a fixed IP address in port forwarding it is recommended that the server uses a static IP address and not DHCP as in the latter case the IP address may change over time...
O.K. so much for networking. I hope that makes things a little clearer and you can verify that your setup is how it is intended to be.
I suggest the following: on the router's security page there is an option to block WAN requests. Remove the check if it is set (meaning: do not block). After you did that change you should be able to ping your WAN address (e.g. ping xxxx.dyndns.org) from the internet. That way we know that it is on the correct address.
Also on the Administration page make sure that remote management is disabled (should be like that per default) or that the management port is NOT 80 but for example 8080. What is your your UPnP settings on the same page?
O.K. that should be enough for the moment... -
EVDRE encountered error retrieving the data from web Server
Hi,
I know this is the common/generic error message, following is our scenario:
We installed BPC NW 7.5 on our production box and configured F5 load balancing for two .NET servers.
We are getting the error "EVDRE encountered error retrieving the data from web Server"when we run the report EVDRE on APSHELL (original Appset). This is the fresh installation:
The workaround "Clear Local application information". Even this works only sometimes.
Is there anything else we should have configured on using two .NET servers?
Please suggest.
Thankshi Nagesh sorry for the delayed reply..
We changed some of the parameters at F5 switch like sticky time, timeout..
And the MDXPARSER connection to one of out application server was failling, thats why we did not had this issue consistently.
When ever the request goes to that app server fails. It took a lot effort to notice this since we were assuming the F5 switch was only causing the issue.
Thanks -
Hello,
I have installed Oracle9i application server Rel 2,9i Infrastructure & oracle 8i DB on Win 2000 server.The installation was successful.
When I access the browser with http://<hostname>:7777 it works fine, it shows HTTP server welcome page.
Now I am trying to access Portal home page using http://<hostname>:7779/pls/portal
It seems, it searches for the Web site for sometime & then gives the error "No response from Web Server"
What is the problem ?? Is there anything with the services ?? I can see two http servers(apps & infrastructure)in the program listing,is it related with these ??
Please help.I will appreciate your support.
Regards
SandeepHi Sandeep.
Try run EM WebSite running in http://<hostname>:1810.
If you are familiarized with this service it should be easy to solve your problem.
Once you access EM WebSite, you'll see two farms(One for iasdb, and one for Portal). That are some symbols that tell you about the status of Portal. If You see an red arrow pointing down, then you need to access Portal farm to put some services "up".
Choose the link for Portal Farm.
This page shows the status of all Portal components.
For you to get response from your portal http server, there a few of these that must be working.
They are (by order):
1. OC4J_Portal;
2. Web Cache;
3. HTTP Server;
For you to start them, you must (for each one) click on it's radio button an choose start.
With this components "up" you should be able to access Portal.
Some of other components cannot be started by us, because it's radio button is disabled, but Single Sign-On:orasso:7777 must be "up", and
Portal:portal:7778 in my case is "down". The rest of OC4J components are needed for other utilities like deploying components.
Hope i helped you.
Pedro. -
No response from web server after a process ran for 1-2 minutes
Hi,
I have a proven pl/sql code, it took about 2+ minutes to complete in sqlplus.
But when I created a button to process the exactly same code in APex application, the process runs about 2 minutes and
applications bombs with this msg "No Response from web server".
Has anyone gotton this msg before?
Thanks,
JulieHi Julie,
See this thread - it may had some extra considerations for you: OHS Webserver Timeout for long running requests
Do you know if your error message is returned at a fixed time each time? You could test this by creating a procedure that sleeps for X amount of time and then vary X to see if you can find a cutoff point for losing the connection.
Also - I assume that your process keeps running on the database, despite the webserver connection being lost?
If it's not a limitation in your httpd.conf file (the default is 5 mins as others have pointed out), then perhaps your network colleagues have set something in your network configuration to kill connections longer than a certain period of time? This is what happened in my case.
Hope this helps.
Alan -
EVDRE encountered an error retriving data from web server in PROD
Hi friends,
We are checking Evdre reports in BPC production system. We checked few application' EVdre input templates & reports and are fine.
But yesterday evening onwards we are facing below error message.
EVDRE encountered an error retriving data from web server. This message we are getting for all BPC applications in BPC production. There is no short dump in backend.
But when i checked in BPC developement there is no probelm.
We are on BPC7.5 NWsp04 and BI7.01.
In BPC, production,when i try to create evdre template(just after filling
information in evdre builder), immediately getting same error information.
I read few notes, did as per that but sill problem exists. In note, mentioned process dim of particular application and process application. Logout from bpc admin & excel. I did this and, that error message not received for upto 20min. After that i'm getting error. We checked communciation between ABAP layer and bpc, reset IIS also. Still same probelm exists.
Any suggestions pls.
thanks,
nareshHi frineds,
SAP OSS team resolved along with our basis guy.
Initially SAP supported notes:
1.1475233 and 1378705 Process all dimensions and applications.
2.1355954 Drop SAP temp tables.
3.1428764 confilict only if you use Oracle 10 g, if you don't, then forget it.
I used 1378705 and problem resolved temporarly, but still exists after 1 day.
There are different reasons for getting the error message. In our case, problem is at backend BW and, BW system running on HP unix OS.
Checked librfc32.dll in the
directory /usr/sap/BP1/DVEBMGS00/exe.
Executed the following MDX statment in MDXTEST transcaction, and it
executed in both the available instances.
SELECT
{[Measures].MEMBERS} ON COLUMNS,
[0MATERIAL].[LEVEL00].MEMBERS ON ROWS
FROM [$ZCO_CDPC].
Even i also don't have clue how SAP resolved this issue.
Regards,
Naresh -
When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates < -
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
Nor have you said what version of OS X and Safari you are running.
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
hey guyz.. i wanna ask if i get an updated version from itunes when i plug my iPhone into the Pc, i get a letter tells me that there is an update for your iPhone ... i wanna ask is it safe to download ?? and does it make any side effects on longTerm using ??
It is safe to download if your phone is not jailbroken. Before you download it, however, take some precautions:
Reboot your computer
Disable your antivirus and firewall
Connect the phone cable to a USB port directly on the computer, not a hub
Before updating right click on the name of the phone in iTunes and choose "Backup"
When you are given the choice choose "Download only", not "Download and Update"
After the download completes successfully click the Update button to install it.
Most of these steps are just being overly cautious, as most people ignore them and have no problems. But occasionally the extra steps save grief. -
Insert and update tables from SQL server to oracle database tables
Hi,
I am having problem while update data from sql server to oracle database tables.
I am doing one way insert +updates that is from SQL Server tables ==> Oracle database tables
I am using tools Sql server Integration service. I can insert data from sql server to oracle but update can't. Please help me how can I update + insert from sql server to oracle database tables easily.
Thanks in advance.Hi,
What about using Oracle SQL Developer for migration
http://www.oracle.com/technetwork/database/migration/sqlserver-095136.html
HTH -
Steps required to create apps to implement various web parts functionality
I have office 365 E3 a/c.
For a site we have to create few apps whoose required functionality is like
1. Newsfeed Webpart
2. Blog webpart (source is library)
3. CQWP
4. Carousel web part
5. Calendar control
Please tell all steps required to create apps for above mentioned functionality.
What will be steps and plan for this?Hi,
According to your post, my understanding is that you want to create apps to implement various web parts functionality.
You can use CQWP in the SharePoint Online. You can refer to:
When to use the Content Query Web Part or the Content Search Web Part in SharePoint - SharePoint Online for enterprises
In addition, there are some great articles about other web part for your reference:
Data Viewer App for SharePoint Online
Corporate News App
Creating a SharePoint Cloud Business App Step by Step!
Blog - Deploy A LightSwitch Application To Office 365 / SharePoint Online (Provider Hosted)
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Could not load servlet information from web server
I am trying to register a servlet through the web object manager.
As soon as click the web object manager menu pick I get the following
error: Could not load servlet information from web server.
On other peoples machines here it works fine and they can register
servlets. What am I missing!You must be using Jdev 3.2.x, this is a known bug. In Jdev 9.0.2 we use the standard J2EE web.xml in order to register servlets. You should consider moving to the new IDE.
-
Can i remove the words "created in trial version" from a file now i have purchased full version?
Can I remove the wording " created in trial version" from a video now i have purchased the full version?
Presumably a Premiere Elements question. For future reference note that Premiere Elements has its own forum and you should post further PRE questions there. But the answer to your question is in the PRE FAQ entry - http://forums.adobe.com/thread/433730?tstart=30.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Where to download Developer (ANY VERSION) from web?
Where can I download Developer (ANY VERSION) from web?
I need to install it on NT. What Oracle Database should I Install with it.
ThanksAmareesh,
I assume you re a beginner.
Even Then it is available in this very site.
Look at OTN and products.you have lots of docs over there.
Vijay -
Run form letter from web server
Has anyone been able to design and run a form letter report in html. When I try to run it, it is always blank. I would like to run it as a .jsp.
Hi,
The form letter report is applicable only for paper layout. It is not applicable for web layout.
However, you can generate to html/htmlcss output from web server using the following command.
http://server:port/reports/rwservlet?server=<server_name>&destype=cache&desformat=html/htmlcss&userid=<connection_string>
regards,
Senthil
Maybe you are looking for
-
Slow network with "Small Business Server 2008"
Sinds upgrading to a "Small Business Server 2008", the copy speed of a file dropped from >18 Mb/s (SBS 2003) to <1 Mb/s (SBS 2008). Other systems (Vista, XP) show no slowing down. I searched the internet but found no solution. Please help. Fulco
-
I have the lates operating system on my 5th generation Ipod Touch and today I tunes has started crashing. The only thing I have changed is that I uninstalled a scriptual rosary program and I have upgraded my laptop os to Windows 8.1. How do I get my
-
Sales Documents released through VKM3 or VKM4, for Credit Check not displayed through VKM2. Reasons thereof???
-
Hi all, I want to use the following NC log API,but I don't know how to initialize the interface's java object and set the parameter "ApplicationVO". Interface LogNCApplicationInterface Method ApplicationVO addNDone(ApplicationVO applicationvo) Please
-
powerbook G4 1.6,OSX 10.5.8, cannot download any updates due to message,startup disc too full ! how can I remove less that important from startup ( never done this before ) ect !