Creating Blu ray disc using FCP

I'm curious to know how people are creating a data file for a Blu Ray Disc that use FCP? i.e Toast w/ a third party burner.
Thanks

Will you be using Encore or Toast to encode the video file?
In either you should start a video file exported as self contained current settings from FCP, and encode that to either h.264 blu ray mpeg2 HD in the settings of either Encore or Toast.
What are your sequence settings in FCP?

Similar Messages

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Final Cut Pro 7: problem creating Blu Ray disc

Hello, I've a problem using FInal Cut Pro 7. I want to create a Blu Ray disc using the "Share" function, but during the process - after many hours - appears this warning message: "SHARE WARNING - NSEXPETION RAISED BY 'NSPORT TIMEOUT EXCEPTION' REASON = CONNECTION TIMEOUT: DID NOT RECEIVE REPLY". Someone can help me? What does it mean? Thanks! P.S. Duration of my film (in the timeline): 35 minutes.

Yes. It will only burn Blu-Ray if it is the Pro version though.
Compressor will also burn the Blu-Ray if you set it up to do so:
http://documentation.apple.com/en/compressor/usermanual/index.html#chapter=25%26 section=3%26tasks=true

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Creating Blue-ray disc - H.264 Codec?

Hi, I know I can use MPEG-2 for Blue-Ray. Is it possible to use H.264 Codec for Blue-Ray in Compressor? (it should be much more efficient then the MPEG)... How can I make it work?

How long is your video?
I have made Blu-Ray discs using Compressor and the latest Toast Titanium on standard DVD discs.
In compressor just encode your video using the HD DVD codec supplied.
Then, using toast select Blu-Ray disc (if you have a Blu-Ray burner) or select Blu-Ray on DVD (this will create a bluray disc on a standard DVDR although you will be limited to around 30mins)
I have done this succesfully a few times and played back using PS3 with no problems.

Fcp 7 project through compressor 3.5 or share re: creating blu ray disc

Am I missing something but it seems you can't send a fcp project to compressor 3.5 via the "send to" option as there isn't any appropriate settings for blu ray, only HD DVD.
But you can through the share option. Is that the case or am I just getting too old for all this new high tech stuff??
"Roger Retired"

Hi iamfrustrated
I'll have to tell you I don't have much experience with compressor, I've been using Episode to transcode my DVD files and Encore to author my DVD's and I am just getting started with burning Blu-ray. But I would think you could simply burn a Blu-ray disc image to your hard drive from within compressor and then even use toast if you want to turn make additional copies. Is that perceivable?
Ron

Best way to copy FCP-created Blu-ray Disc?

Tried using FCP7 to burn another copy of a Blu-ray disc a week after I burned the first copy. But since I didn't want to wait 16 hours for FCP to encode the Blu-ray files again, I copied the files off the first Blu-ray Disc I'd burned onto my desktop. Then, I inserted a blank Blu-ray Disc into my external burner and copied the desktop files onto it.
The new disc burned with those files ... but when I play it back in my Blu-ray player, there's no audio. Any ideas??

Try making a disk image from your original disc, then burning from that.
1. Insert your disc and launch Disk Utility.
2. Select your optical drive in Disk Utility.
3. Choose File > New > Disk Image from<disk name>.
4. Choose DVD/CD Master, press OK, and wait.
5. Select your new image on the left, then press Burn in the toolbar.
Not sure if this process has changed for Blu-ray but I suspect not. The disk format for DVD and Blu-ray is UDF (not FAT32 or HFS+ which you get from a standard Finder burn).

Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5

Yesterday I spent more than 7 hours trying to create and burn a Blu-ray disc (actually an AVCHD disc on DVD-5 media) in both FCP 7 and Compressor 3.5. In every case, disc creation would go to completion of the encoding of the video and audio files, but when I was asked to insert a disk, I would do so and the disc would spin for about 30 seconds and then I would get the following error message: "There was an error burning your disc. The bit rate exceeded the maximum allowable." This message cannot be a correct description of the problem because I used the Blu-ray template that Apple provides in FCP 7 and Compressor 3.5 to create my disc. This template limits the bit rate to a maximum of 15 mbs and my video was only 15 minutes in length.
Additional information as follows: I am using an Early 2008 Mac Pro 8-core. I have Final Cut Studio 3 installed with all of the latest updates. I am running Snow Leopard 10.6.4 (latest updates all installed),and I have experienced no other problems with FCP 7 or Compressor 3.5. My Mac Pro's internal superdrive is functioning fine, and in fact, I eventually took my FCP7 project and rendered it to a QT reference movie and used that in Adobe's Encore CS5 to burn and AVCHD disc using the same internal DVD burner on my Mac Pro and it worked perfectly.
I am seeking any suggestions for how to address the problem (whatever it is) that gives this error message. Would you recommend a reinstall of the applications in Final Cut Studio 3? Other suggestions? Has anyone seen this error message when trying to burn Blu-ray or AVCHD discs from FCP 7 or Compressor 3.5?
Thank you in advance for your help.
Tom

Guys,
I am deeply appreciative of all of the suggestions and help received on this issue. I apologize for not responding sooner, but i have been looking at the problem described in this thread from numerous perspectives.
Jeremy, you may well have hit upon the solution, and I am trying your suggestion now. I did not realize that when you selected the Blu-ray template and directed it to a DVD burner that would make an AVCHD that you could alter the bit rate settings. I looked at the default bit rate that Apple sets when you select this template and I found that it allowed a maximum of slightly over 17 MBs and an average of 15 MBs. That is too high for an AVCHD disk, and thus the error message that I am getting may well be correct and not in error as I previously thought.
I have found that I prepared Blu-ray AVCHD disk as recently as late April with no problems so I don't know why I have not run into this problem of too high a bit rate before, but I had not. It may be that I used a Custom Present that I prepared and set my own bit rate for those disks.
In any case, I am trying a run now where I have set the bit rate to a maximum of 15 and an average of 13. We shall see if that still produces the error message. I shall post my results when I know them.
Again, thanks to all of you for your fine help.
Tom

How do I create Blu Ray Disc with DVD Studio Pro ?

Folks, I think that I'm in trouble... I created 3 HD projects with DSP (i do not have the tapes and fcp project anymore, neither the HDV 1080i mov file) and I need to be burned it with a Blu-Ray Media, and play it with a BR Player... So far I made the following steps:
1-) In FCP, I exported some Quicktime Movies with HDV 1080i60 codec (movie with chapters, menu bg movie, extras).
2-) In Compressor, I used the preset HD MPEG-2 19,0 MBPS for videos, and Dolby digital professional 2.0 for audios.
3-) In DSP I created a HD DVD Project (DISC window, GENERAL tab, DVD STANDARD = HD DVD; DISC WINDOW, DISC/VOLUME tab, DISC MEDIA = BLUE LASER, LAYER OPTION = OTP) with movies, extras, menus...
4-) In ADVANCE BURN (under FILE MENU) I chose BUILD.
5-) Now I got a HVDVD_TS folder, with my movie compilation...
NOW, my doubt is... The folder HVDVD_TS can be burned on a BR Media and be played on a BR Player ?
If not, what can I do with my HVDVD_TS folders to be compatible with Blu Ray ?
thanks a lot for any help.
Best Regards
Marcelo

That can't be done. Get the tapes back and start over. Get the new Toast in the tutorial I posted to make a Blu ray disc.
You could try this tool to demux the streams, transcode to QT then re-encode for Blu Ray but I wouldn't go that direction unless you know what your doing. You would also be encoding twice which is not good.
Get the original source back and go the toast route from the start.
Message was edited by: Eric Pautsch1

I keep getting "media not present" when tring to burn blu ray disc using PE 10. This used to work fine. Nothing changed as far as I know

Has any one had this problem?

Karl
Thanks for the reply.
Part 1.
1. Task Manager/Process. If you are seeing the following processes with Premiere Elements 10 closed, then Task Manager/Processes and End Task for each of these processes
that you are seeing there
a. Adobe QT32 Server.exe
and
b. Elements Auto Analyser.exe
Part 2.
a. Open Premiere Elements 10 to the Timeline workspace, go to Help Menu/Deactivate and click on Deactivate. Close out of there.
b. Then, uninstall Premiere Elements 10 via the usual Control Panel route.
c. Do a run through with the free ccleaner (regular cleaner and registry cleaner parts).
CCleaner - Download
d. Reinstall Premiere Elements 10 with antivirus and firewall(s) disabled.
Part 3. ccleaner details.
Cleaner part. This is straight forward. Click on the Cleaner Tab in the left column of the ccleaner dialog and then click on Run Cleaner in the section of the dialog to the right.
Registry part. Click on the Registry Tab in the left column of the ccleaner dialog. Then click on Scan for Issues in the section of the dialog to the right.
After the "Scan for Issues" is completed, you will then see an active "Fix Selected Issues" to the right of "Scan for Issues".
Click on "Fix Selected Issues".
At this point, you will see a pop up dialog
Click Yes to that message and continue to Save the registry backup file to your computer hard drive location of your choice.
Follow the on screen instructions after the save of the registry back up file.
Part 3.
The critical part is that you obtain the Premiere Elements 10 installation files. You already have the purchased serial number. So you should be OK on the serial number side of things.
Download and install the Premiere Elements 10 tryout files appropriate to your computer from the following web site. It is critical that you read and care out word for word the web page's write up for "Note: Very Important Instructions" and use its click "here" as instructed. Otherwise you will get an excess denied message.
Photoshop Elements 10 Direct Download Links: Free Trials, Premiere | ProDesignTools
During the installation of these files to your computer, when asked for, insert your purchased serial number into them.
Make sure that antivirus and firewall(s) are disabled for the download and install.
Comments. There are no guarantees that this will resolve the "No Media Present" for Premiere Elements 10 burn to AVCHD on DVD and Blu-ray disc format on Blu-ray disc. In the end, you may have to look at external burners until you find one that works for you for these burn to choices.
Did any of your computer pre-loaded software come with backup installation files? I suspect not.
Please review the above and then let us know if you need clarification on any of the above. You might want to give more consideration to exploring the external burner possible solution.
Thanks.
ATR

Instructions: Create Blu-Ray disc in Compressor with Final Cut TImeline

I searched mightily for simple instructions on how to do this. The Compressor help files are woefully inadequate in providing a simple walkthrough to do this. Burning a Blu-ray directly from Final Cut does not allow one to optimize the conversion like compressor does. So:
1) Right click your chosen sequence in Final Cut
2) Click "Share" The Share dialog box will come up.
3) Choose "Blu-Ray" in the destination drop down in the top-left corner of the Share window (don't forget to choose the destination location of the files at the top of the dialog)
4) Click "Send to Compressor" in the bottom-left corner
Compressor will open and a job will automatically be created with Blu-ray video
and Dolby ac3 audio. Set options and submit as usual in Compressor

The send to compressor option occasionally creates problems. Most people would recommend exporting as a self-contained movie, then bringing that into compressor and using your workflow from there.

Using an external Blue Ray Disc Drive/Burner with an imac? Can I? Brand?

I have a blue ray player in the living room and I'm just starting to research burning blue ray discs using the imac.
I have an intel based imac, 2.8ghs intel core 2 duo, 4gb sdram, 1tb hard drive.
Should I be able to safely use an external blue ray burner?
If so, recommendations as to a product?

there is no official support for blue ray drives in leopard. Steve jobs said blue ray is "a bag of hurt" referring to the licensing issues for blue ray.
As a result there is no recommended drives as they are not officially supported.
I can't recommend either as I don't use Blue ray yet.
A quick google brought up this
http://www.tuaw.com/2007/01/25/blu-ray-arrives-for-the-mac-wheres-hd-dvd/
Judging by your list of gadgets below your post, it won't be much good as it is for the Mac Pro
All I can say is that Snow Leopard may bring better support for Blue Ray, all you can do is hope!
Regards

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

How I can burn a Blu ray disc in my mac?

Hello,
I´m worried cause I don´t know how burn a Bluy ray
But before, how can I do the menus?
nickeditor

You cannot use DVD SP to burn a Blu-Ray disc. But you can use the latest version of FCP to create Blu-Ray discs. There is a tutorial here;
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html

Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

Hi all,
I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
Thanks for any help you can offer.

I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
Hope that helps

Creating Blu ray disc using FCP

Similar Messages

Maybe you are looking for