Creating BO or Crystal reports using SAP - R3 - Possible?

Hi,
Is it possible to create Business objects or crystal report with just SAP R3 system (without using SAP BW)?
Thanks in advance
Regards,
Subbu S

Hi,
In latest release in BOXI3 we have option BO and SAP integration kit.whilt installing you need to install this integration kit i.e. how we are installing Deski and designer.
Once you have install this option we can directly use SAP R3 source and we can gentrate reports and we can use SAP R3 source table in to universe desing and we can design universe. Once universe desing done we can use this universe for report creation.
Thanks
Vivek.K

Similar Messages

Connect Crystal reports using SAP BW 3.X

Hi,
Help me in Crystal reports with BW :
We are using Sap Ecc 6.0 and BW 3.x. I want create BW queries in Crystal Reports.
1. which Crystal reports versions are supported. ( I have crystal reports 6.0 )
2. Send me the procedure to connect and create crystal reports .
3. any FM is there to connect and display Crystal reports using ABAP like ALV .
Thanks in advance.
Regards,

BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Crystal Reports and BI Hierarchies
/people/ingo.hilgefort/blog/2008/02/27/businessobjects-and-sap-part-3
Crystal Reports and SAP R/3`
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Getting started
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/20f83c7e-3f2a-2c10-7dbf-a5ec14611a1e [original link is broken]
Software / Installation
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/a02d2792-452a-2c10-7c8f-ddd50dad779b [original link is broken]
Content Library
https://www.sdn.sap.com/irj/boc/business-objects-for-sap?rid=/webcontent/uuid/70041b55-b52a-2c10-87a3-e4fa3c3acdaa [original link is broken]
Ingo

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Can I create one single crystal report using 2 bex queries

HI all,
I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries and develope one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
Only problem is client is particular about one single report(either crystal or webi)
if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
Please let me know if I can link OLAp universes and go for 1 single webi report.
Any help is appreciated.
Thanks in advance,
Mahathi

You can use either CR or WebI.
In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
Regards,
Stratos
PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query?

Unable to Access BI InfoSet in Crystal Reports using SAP Info sets driver

Hi,
I am looking to develop a report on top of BI InfoSet in Crystal Reports. However using the the SAP InfoSets driver I am only able to visualize 'Classic InfoSet' and 'SAP Query'. It does not show the option to import the regular InfoSet as a datasource. I am unable to access the InfoSet built by the db join on InfoCubes that is available in SAP BW System.
Can anybody help.
Thanks,
Amogh

Hi all,
i know this discussion is abaout 2 years old, but i faced a similar problem. I try to get access to the regular InfoSets (SQ02) within a direct connection between SAP and Crystal Reports. Which components and tools did i need to get a connection?
look here: http://scn.sap.com/thread/3365060
Thanx for your help!
Best Regards
David

Database Connection error in Crystal Reports using SAP BW system

Hi,
While using Crystal Reports in trying to build a report on the SAP Query in SAP/BW System using the MDX driver, I am able to get the structure of the query fields into the report but on the other hand while trying to refresh the report for data I am getting the error message u201C Failed to connect to the databaseu201D . This database connection error occurs despite the fact that the SAP server authentication details being entered on Refreshing the report is correct.
What could be the possible reason? Any guess...
Thanks,
Amogh

Hi,
Yes, I am using the MDX driver.
Is there any pre-requisites of importing certain ABAP transports into SAP Server since I haven't done any? Please recommend.
Thanks,
Amogh

Print Preview using crystal report in SAP B1 slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86

Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM

Print preview using crystal report in SAP B1 is very slow.

Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh Naware

Hi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM

Crystal report using ABAP from SAP ECC6.0 EHP 3.0

Hi Gurus,
Can i create crystal report using ABAP in SAP ECC 6.0 EHP 3 . as i am not able to see this link in SPRO.
IMG > SAP NetWeaver > Application Server > SAP List Viewer > Maintain SAP GUI Specific Settings.
Kindly guide me urgently.

http://help.sap.com/saphelp_slc/helpdata/en/27/c9ee1951fc4fb9ac322ac7e6fa7372/content.htm
If I understood your question correctly.
Have a look in the link above.
It is possible to use Crystal Reports from ALV.
Tammy Powlas also has some good guides on how to do this.
The ABAP however is not covered that much.
Best Regards
Ingrid

How to create a crystal Report using C# and SQL Server

Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advance

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to add/create additional page in Crystal Report Layout SAP B1

Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas Marsetyo

Hi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish

Creating a crystal report using excel

I have an excel spreadsheet that I would like to access to create a crystal reports. But it seems that I have to first save it as an access or other database file. But this information changes frequently so I it would be more efficient to access the excel file directly. I tried using the crystal wizard addin in excel, but then when I run the report I get the error message "Server has not yet been opened". Any other ideas on how to create report of excel data directly?

Hello Guys ,
I have something similar problem ,but not exactly.
our requirement is We are scheduling one crystal report to generate excel and sent to FTP location.This Excel file (in FTP) should be the input of new Crystal Report using ODBC (RDO) connection.
I am able to create the ODBC connection,but that ODBC connection is not showing me the selected excel sheet in the Crystal Report ODBC Connection.I tried with Remote as well as local drive Excel also.
I tried on different machine (thought ,it could be Driver specific),but all machines does have same issue.
Is there any settings or driver upgrades require for CR XI R2 /2008 in order to use ODBC (RDO) for EXCEL FILES.I didnt find any comments /resolution in Google too.
My steps -
1) Create a sample Excel file - only few records
2) Created a System ODBC connection pointing this excel file say "TEST1"
3) Opened A Blank Crystal Report
4) Create a New connection
5) Select ODBC RDO
6) Create new connection and selected the newly created SYSTEM DSN "TEST1"
7) check the selected excel is displayed in ODBC RDO connection??
If it is a Crystal Report issue or ODBC Driver issue ,please let me know if anyone have came across similar issues.
thanks in advance.
Nitin

Display structure in crystal report using structure created in BEx.

I created a structure in BEx query designer and trying to display the structure as a hierarchy in crystal report.
Iam not able to accomplish it. the crystal report is displaying the structure with no nodes. please help

Hi,
in case you created a BEx query with 2 structure - one for keyfigures and one as characteristic structure - then the structure for the characteristics will result in Crystal REports using the BW MDX Driver as a single field and each element of the structure will result in a row of data.
regards
Ingo Hilgefort

How to create crystal reports using servlets/jsp

plase any body help me how to create and interact with crystal reports using java

To use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda

How to create crystal reports using MSDE 2000?

Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I am using Crystal report 8.5. My Database sqlserver 2000. I generated reports and are working fine.
Now I want to use MSDE 2000 instead of Sqlserver 2000 due to license factor.
My application is developed in VB 6. The all the parts of the application is working fine except the report.
All reports produced Database DLL error.
So I opened the report and try to verify the database. But it gives pdssql.dll not found. Database error.
After this error, I tried to create a new report and found that there is no option for MSDE 2000 database selection under more database.
I usually select Sql server 2000 database under More Database option of location wizard.
How to create crystal reports using MSDE 2000?
Is it due to crystal report 8.5 verison problem? I also have crystal report 11 licensed copy.
Please give me the good solution as early as possible
RegardsS. Muhilan

To use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda

Creating BO or Crystal reports using SAP - R3 - Possible?

Similar Messages

Maybe you are looking for