Creating BP in MSA

Dear Colleagues,
When I try to craete the new BP in MSA, R/3 account group combo shows no value and because of that Partner ID is not set by the system after saving.
Combo should display the vaule which I have created in CRM system and for each, number range is assigned.
AM I missing anything here?
Please respond
Regards
Milind

Hi Milind,
Check contents of table smot077x on your mobile client. This table is master data table for account group (KTOKD). My guess is, you don't have any data in this table. If that is the case, then check CDB. If CDB has data, then play with subscriptions of your site to get the same data downloaded to your mobile client.
If CDB doesn't have data then you will have to find appropriate download object to download this data from CRM to CDB.
Hope this helps.
Regards,
Kaushal

Similar Messages

Creating Employee for MSA

Dear Colleagues,
Got stuck with the follwing, please do help...
I have installed the MSA client and now wanted to create the user for login to MSA. When go to SMOEAC --> selected Employee -->, but create, display, change button is disabled. So not able to create the new employee. Even default MSA users are also not visible (there are no users).
Did I miss something? Please do respond.
Regards
Milind

Hi,
There are two conditions that need to be satisfied for logging into a mobile client. The user must exist as an entry in the table smousers and smomitabt.
Please check if the entries are available in both these tables in the CDB. If not, then try downloading the BUPA_MAIN object from CRM to CDB.
Once you get the data to CDB in the above tables, please create a subscription using publication "User by Employee" and the condition that the USER_WRITE segment with segment field SFAMITABT and the SFAMITABT app. field of SMOUSERS application table match the user that you want as a login.
Subscribe the same to the site and conntrans it. You should see the table entries in the mobile client. Please let me know if you still have problems.
Also, please note that you cannot create Employees in Admin Console what so ever. Once you make the BP as an employee in txn. BP this is visible in the Admin Console and you can modify but not create.
Hope this helps.
Regards TVS

Customer Interaction Center -- MSA

Dear Colleagues,
The scenarion is:
Sales Representative has created Activity (Meeting) in MSA. By default logged in user will be taken as fuction "Sales Representative" in 'Person responsible' tile. I have added one more employee in this tile as fuction "Person responsible".
So till here, sales rep has created activity in MSA and deligated this to one employee.
Now as a employee, I go to CIC (customer intreaction center) screen and I would like to know what all activities are assigned to me by my sales representative. Is this possible?
I can not see ant option to search my activities.
Please do guide.
Regards
Milind
I am trying to search with g

I'm not sure about the way CIC works.
But you should be able to search this activity using transaction CRMD_BUS2000126 (activity maintenance).
In partner dropdown select particular partner (sales rep or person responsible), select particular employee as search criteria and you should be able to find that activity.
Regards,
Kaushal

Windows Live Accounts for Company Phones?

Hi all,
I am hoping you can help.
At the company I work for we are enrolling Windows Phones as the Business phone but to get our Mobile Device management Software on we need access to the Windows Store.
I only need the Live accounts for the store. The users do not need individual Windows Live Accounts
I was wondering what is the best way to sign up 20+ phones so they can get apps from the store?
Any help would be appreciative
Thanks in advance,
Alex

The Windows Phone Store does require a Microsoft Account(MSA) to download apps. This can be either the end user's MSA or a company issued MSA. All MSA's have a 5 device limit on Windows Phone. If you plan to create your own MSAs, note the following:
Currently there is a limit that only 3 Microsoft Accounts can be created per day from the same IP Address. You can request an exception by using the following form:
https://support.live.com/eform.aspx?productKey=wlidipexc&ct=eformts&scrx=1
To submit a whitelist a request please have the following information available:
• Contact Name
• Contact email address
• Customer Name
• Customer Company Name
• Microsoft program the customer needs the exception for
• Company Domain(s)
• Public IP Address(es)
Temporary whitelisting of an IP lasts for 30 days. Whitelisting requests should be within 30 days of the final day of the planned event, but not any sooner, to make sure the IPs in question remain whitelisted through the entirety
of the event.

ESO/ERP Integration for Service Items?

Hello experts,
In an ESO/ERP integrated system, can data from Service master in the ERP also be used to create RFQ's and Auctions in ESO?
Are there any special considerations for Service Items in such an integrated environment or would they be treated as regular material master items inside ESO?
Thanks & Regards,
Reshma

Hi Reshma
You are right, currently Item type D is nto supported for the ERP - ESO implementation for Document types RFQ, PR, PO that are created from the MSA or the RFx award from SAP ES.
However, you can still try to create the interface using some Z programs if you are pushed to the limit
What you can do?
1) Copy the Program for the BBP_ESI package model it to suit methods that call the Service line into the PR with Item category D - if you are successful here, you can check with the available list of API's on the ES side to check where in the XML extract you can actually incorporate the Service lines
2) Create a Proxy using the existing interface delivered for RFQ or PR from ECC to SAP ES RFx, in PI you can define the Service line logic so that the Payloads in PI can enable this transfer
3) The XML that is generated for this interface must be in Sync with what all RFx expects to process it as a service line, since there is no classification on the SAP ES side for addressing service lines separately.
4) You can also extend the XPRess functionality, since SAP ES views Service and print requests service lines, see if you can somehow integrate creation of an XPress draft from a Service PR in ECC, that too should be possible.
5) If all approaches fail, its better to integrate the SRM SoCo to push the Service lines into SAP ES RFx draft, below would be the approach.
u2022 Requirements from SRM, SAP R/3 or SAP ECC to SRM Sourcing cockpit
u2022 Create Bid invitation in SRM : Draft status
u2022 All SRM Bid Invitations to populate in a new screen developed, this screen will have all bid invitations lined up with a check box next to them, the Bid Invitation can be selected and pushed to SAP E-Sourcing
u2022 Proxy created to extract these fields from SRM and put it in XI outbound
u2022MAP / Cross MAP the data structures and pass the data
u2022 Push the Bid Invitation into SAP E-Sourcing as RFx Draft
u2022 Once the Bid Invitation is pushed into the SAP ESO application, it cannot be modified in SRM
Hope this gives you some fair approach

SBDoc creation on CRM inbound Queue

Hi,
I have Modelled BDoc,Mapper,Validation,Bridge and
Now i want to post sBDoc(runtime) on SAP CRM Inbound Queue .
Please let me know How can i create sBDoc from MSA.
Thanks in Advance
Edited by: Bespoke!!! on Jun 14, 2008 1:30 AM

Hi Kai,
Thanks you very much for your reply.. I created temp z table and posted BDoc. It worked..
Also i have few more doubts..
Once the Mobile development is done.Where i can i check inbound queues.
1->In SMQ2 or SMQR. In SMQR i can see SITE queue.When i clicked on this there are no inbound Queues..
2->Is there any way I can stop inbound Qs and start debug from there..
3->Where can i check failed or processed I/b Qs.
Thanks
RP

Error when trying to create new BP in MSA 5.0 SP08

Hi,
We have currently an issue in MSA 5.0 SP08 when we are trying to create a new BP. We receive the message "Relationship (Employee) - Error handler in function EvalsfakvbeztpfromReltyp reached". Looking into the code we find this error handler in the BOINTBPEMP :
The error is triggered when the standard method CreateBusineesObject is invoked. Sfamitabt contains a guid but it's a string and as you can see, the method should wait an object. Not sure if it is the source of our problem:
Public Overridable Function CreateBusinessObject(ByVal typeName As String, Optional ByVal parameterNames As Object = Nothing, Optional ByVal parameterValues As Object = Nothing) As SAP.MT.FW.BLL.BusinessObject
Member of: SAP.MT.FW.BLL.BusinessFactory
Some more investigation we did : the object Err.Number equal 0 (no internal error) and i was not able to put a break point into the class constructor for BOEMPLOYEE because it is a protected event (CreateBusinessObject("BOEMPLOYEE" should be link to the class contructor of BOEMPLOYEE when a new object is created)
However, I can confirm that SFAMITABT contains a valid guid (i checked smomitabt) and i also tried during the debug session to change interactively the guid with an other valid one, but i still have this problem.
I started the sql profiler but i saw nothing relevant in there.
I modified the sensitivity for the debug in order to see if i will have more informations but without success and the MSIL (intermediate languaged) did not help me more.
Please advise,
Thanks
Christophe

Aren't customer task not used anymore?
Or am I mixing things up here.
Well the problem isn't a problem it is SAP standard behaviour you simply can't configure customer tasks (type T in PFTC)
You can only configure Standard Tasks (TS) or workflow templates (WS)
Kind regards, Rob Dielemans
Edited by: Rob Dielemans on May 29, 2009 12:51 PM
Just had a look at the SAP help and indeed types T aren't allowed anymore SAP gives the solution to copy the customer task, this will automatically change it to a standard task

Preventing re-pricing in CRM for document created in MSA

Hi All,
I am trying to prevent a document (specifically a quotation) that was created in MSA being re-priced in CRM as we have differences in the pricing, specifically user exits for field catalogs which result in errors in the pricing if it is redone in CRM.
As I understand this, you should be able to control this by implementing the BADI CRM_30A_USER_EXITS Method USER_EXIT_UPLOAD_SALESDOC and set the Pricing parameter to 'A' in structure BAD_BUS_TRANSN_MESSAGE-ACTIVE_SWITCH.
However, even after implementing the code below, pricing is still re-determined in CRM, if I look at the mBDOC in TR SMW01 the entries that I wrote into the ACTIVE_SWITCH table in the BADI are not present.
Any help with this would be greatly appreciated, I've been tearing my hair out for a day and this is a major problem on our project.
Many thanks
Jason
Data declarations
FIELD-SYMBOLS: <fs_sdgen_object> TYPE /1crmg0/sdgen_object01,
                 <fs_active_switch> TYPE bad_active_switch_mess.
DATA: lt_fields_active TYPE STANDARD TABLE OF smog_sfldn,
        wa_fields_active TYPE smog_sfldn,
        lt_ddfields TYPE STANDARD TABLE OF dfies,
        wa_ddfields TYPE dfies,
        lv_sfavbak TYPE smo_sfavbk,
        lv_auart TYPE smo3auart,
        lv_sendbits TYPE smog_sinc-sendbits.
CONSTANTS: lc_active_struct TYPE smog_sname VALUE 'BAD_ACTIVE_SWITCH_MESS'.
Get the order details
LOOP AT salesdocgen_write-sdgen_object[] ASSIGNING <fs_sdgen_object>.
    lv_sfavbak = <fs_sdgen_object>-sfavbak.
    lv_auart = <fs_sdgen_object>-auart.
ENDLOOP.
Check the order is relavant for pricing - THIS SHOULD BE CHANGED TO A CONFIG TABLE
CHECK lv_auart = 'ZD01' OR lv_auart = 'ZD02'.
Get the active switch details
LOOP AT bus_trans_msg-active_switch[] ASSIGNING <fs_active_switch>.
Get the table structure
    CALL FUNCTION 'DDIF_NAMETAB_GET'
      EXPORTING
        tabname   = lc_active_struct
      TABLES
        dfies_tab = lt_ddfields
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    LOOP AT lt_ddfields INTO wa_ddfields.
      CLEAR wa_fields_active.
      wa_fields_active-fieldname = wa_ddfields-fieldname.
      wa_fields_active-position = wa_ddfields-position.
      INSERT wa_fields_active INTO TABLE lt_fields_active.
    ENDLOOP.
Fill Sendbits
    CALL FUNCTION 'SMO_SNDBITS_SETX'
      EXPORTING
        structurename       = lc_active_struct
      TABLES
        sfields             = lt_fields_active
      CHANGING
        sndbits             = lv_sendbits
      EXCEPTIONS
        structure_not_found = 1
        wrong_fieldname     = 2
        OTHERS              = 3.
    CHECK sy-subrc = 0.
Switch off the pricing
    <fs_active_switch>-sendbits = lv_sendbits BIT-OR <fs_active_switch>-sendbits.
    <fs_active_switch>-ref_guid = lv_sfavbak.
    <fs_active_switch>-pricing = 'A'.
    <fs_active_switch>-task = '2'.
   MODIFY bus_trans_msg-active_switch FROM <fs_active_switch>.
    APPEND <fs_active_switch> TO bus_trans_msg-active_switch.
ENDLOOP.
ENDMETHOD.

Hi,
I am quite sure that there is no need to do this in some BADI but on customizing level itself (depending on process type or pricing determination), at least for 4.0.
Regards,
Wolfhard

Create custom table in MSA

Hi Gurus,
I have a custom table in CRM online (eg. ZABC). I need to use it in MSA application. How to send it to a mobile machine? What are the steps to make is (bdoc, smo-table, sync-object...)?
regards,
Zoltán Károlyi
ps: SAP CRM 4.0 sp12

Hello Károlyi
lot of steps have to be done.
If the table (ZABC) is presnt in the CDB, first you need to have the correponding mapped Write BDOC for that table.If the Table/BDOC is not present, you need to create a new one.
Once the BDOC and Table is available in the CDB, you need to Generate the table scripts and generate the metadata using client console.exe in the mobile client machine. This step will just ensure you to gat the BDOC metadata and table structure to the mobile client.
I think you would be requiring this for some enhancement in mobile, in that case you need to Generate the table scripts and generate the metadata using client console.exe in the MDW machine.
Are you planning for some enhancements in mobile application ??
Regards
Shankar

How an sale order Created in CRM online will be reflected in MSA

Hi,
Could any one explain how the sale order created in CRM online reflected in MSA.
Give me an idea how data from CRM application is tranfered to MSA.?what is the role of MDW and MAR(mobile application repository) in mobile sales?.
Edited by: Shiva kumar avvula on Jul 23, 2008 11:36 AM

hi,
You can create sales transactions, that is, quotations or sales orders, on both the mobile client and in CRM Enterprise. You can access your documents at any time and place. You can make changes to them as required, for example in the office, or on a laptop during a customer visit. Sales transactions are exchanged between systems using CRM Middleware so that you are always informed about current quotations and inquiries.
First CRM data will store in CDB( consolidate data base), from here transactional data will transfer to MObiles through communication station.
Database that contains data relevant to replication (CDB tables) for mobile scenarios. The CDB is a logical part of the entire CRM database, which also contains application data.
What evet the data coming from CRM online that will convert into SBDOC and thorugh communication station it will reach mobiles.
for more details check the link.
http://help.sap.com/saphelp_crm60/helpdata/en/29/53583c2e39e433e10000000a114084/frameset.htm
Regards
Srinu

CRM 5.0 MSA - create new sBDOC

Dear Gurus,
we are working with CRM 5.0 MSA and we must create the new sBDOC custom.
Can you, please, we indicate the documentation or example about new sBDOC?
Thank you very much,
Maddalena

Easy! BAPI_CLAIM_CREATE.

MSA - creating/changing activity for bp error : enter a valid value for bp

Hello experts,
while using msa with activites, on one client for one bp
I cannot create/change an activity: error:
insert a valid value for bp
This happens only for one bp on this client,
on other clients this bp works fine.
When I look in old activites for this bp, there in activity -> detail
the field bp (hyper link) is not filled.
I think there is a problem with the incorrect bp, but in which tables
can search for this ?
Best regards
Gerd

Hi,
I assume that the BP is present in table smokna1 but not available in smokna1sht (anymore).
When creating an activity the BP selection is based on smokna1, but the field/property validation is based on smokna1sht (see error message).
But unfortunately I don't have any idea for now how to download this particular record to this site...
Regards,
Wolfhard

MSA Activity: error while creating new activity

Hello forum,
I've problems while creating new actvitities for bp.
I get error: sales divison/organ. is not filled for the logged on user
The activity is saved, but I can see shortly this error message.
We have customized in crm-online, that the findung is activated.
Can we deactivate this for mobile client ?
Thanks,
Gerd

Hi Patrick,
thanks for very fast answer.
So I think I have the problem found, but I cannot set the default flag to another
org.unit, because of missing entries.
I've already downloaded the org.modell by crm-report to client, but without success.
Do you now if I have to assign the employee (loggon-msa-user) in crm-org-modell to the org-unit or isn't it necessary for this download ?
br
Gerd

MSA: Creating Notes for BP

Dear COlleagues,
Rather than a questions, I would say it is a clarification I need for BP -> Note tile.
When creating new NOte for BP, I have two text types (corresponding and accounting). Now crreated one note with text type "Corresponding" adn saved. Now I want to creat one more note with the same text type. This is not possible as it says "Enter enique combination of text type and language fields".
Is this is the functionality? Can be changed this somewhere to accept two notes with same text type?
Regards
Milind

In MSA you can definitely do this by modifying business rule brIsNoteLangCategoryUnique. Just modify code in this business rule to return true if a note is being created for a BP.
If you want this restriction to be removed for all objects (BP, Sales Docs etc.) then just remove association of this business rule from BO BONOTE.
Hope this helps.
Regards,
Kaushal

Formating MSA Excel Reports created in MSY

Hello All,
we want to format a excel report, that was created in MSY.
for example we use the Business Query BSACTIVITY with 'from' and 'to' date parameters.
The result is then in the Excle sheet BSACTIVITY.
We have created some programming in the sub "Workbook_BeforeSave"
to copy the data from BSACTIVITY to a new sheet called Calender.
When we run the report creation a second time, the data is written to the same file again, but is not creating a new workbook.
Has anyone experience with the formating of those excelreport ?
We run CRM 40 SP 09.
Thank you for your help.
Best reagards
Frank

Hi,
I just want to push this topic.
For me it's the same problem. I want to format a Excel report which was created in MSY.
How can it be done to save the customized design of the excel sheet? Is it possible to save the design in MSY or is it necessary to create an excel makro?
Thanks in advance!
Regards,
Christian

Creating BP in MSA

Similar Messages

Maybe you are looking for