Creating Cells with differing heights in Numbers '09

In any given Row is it possible to have different cells with different heights because I've found that if I set the cell height to be e.g. 1cm then all the cells in the whole row are 1cm which isn't always the desired effect.
Thanks

S,
A Row is a unit with a singular height value. All cells in that row will have the same height in a Numbers Table. Adjacent rows can be made to appear to have cells with differing heights by manipulating the Cell Border characteristics. You also have the option to combine individual tables in such a way that they appear to be a single table with different row heights.
Jerry

Similar Messages

Numbers point to a cell with different formatting to create conditional format

Hi all, not sure if this has been brought up but my search efforts haven't found anything. I know conditional formatting is not supported in IOS numbers but I saw a buddy do a little trick a while ago and I've been trying to replicate it. On his iPad, he created a numbers spreadsheet that had a logic function (=if). And if that function was true it pointed to another cell with different formatting. The result was, the cell would become the same format as the cell it was pointing too. This created the effect of a conditional format in a sense. I can get this to work with limited effect, only if the cell is a "text" cell and not a formula. As well the background colour doesn't get picked up, only the format of the cell text itself. I'm trying to get in touch with him for help but in the mean time does anyone have any experience in this kind of method?
Cheers

As an example:
If A > B, then A-B, otherwise make it equal this other cell (D1 for example)
{=if(a1>b1,a1-b1,d1)}
And in that d1 cell I would make another formula that also does the same subtraction (a1-b1) however knowing it will be a negative number this time, I paint the cell bright red and hopefully the original cell will then look the same since it is now equal to this one.
Unfortunately it looks like this wont work. The closest thing to doing this trick I have found is pointing to a cell formatted as text, such as a blank cell. Then the original cell takes on the formatting characteristics of the text cell. The problem is the text cell is useless since it can't do any sort of math. I can't even set the cell to simply equal another one and format it as text only. So far it looks like the only conditional type of trickery I can do is make the numbers disappear by pointing to a blank text cell.
I hope that helps describe it a little better.

How to create Report with different work sheets in XL Reporter

Hi All
I want to create a report in xl reporter where one report has multiple work sheets
Regards
Farheen

Hi,
There is no option to create report with different work sheets in XL Reporter. You may only use one sheet.
Thanks,
Gordon

Creating triangles with different angles

Is there a plug-in for creating triangles with different angles? eg. 70-30-80
I got a lot of math stuff to work on and it would be great if I could put in two angles and voila my triangle appears for me to resize as need be.
Or if any one has good suggestions to create these triangles quickly and easily that would be appreciated to.

Hi,
It is not possible,
In PLD u can do it by picking first 3 digit of itemcode from database and assign that database label with different code...
But here u want different color for different group right ?
then u have work more on PLD coding....
If group are fixed/static then it almost possible ...if dynamic then update yr PLD
Thanks
Kevin

Open a Document with different versions of Numbers on different devices?

Hello!
I'm a beginner with Numbers application.
I work with Numbers 3.1 version on my Mac, and Numbers 1.7.3 version on my IPad.
Documents created on my Mac is shared via Iclous, but cannot be opened on my Ipad.
What can i do?
Thanks for your help!

Hi meludwig,
Unfortunately, LabVIEW keeps track of the different VIs in memory using the VI's name. Therefore, if you want to load multiple executables that use the same VIs but with different code, you will want to rename those VIs. LabVIEW cannot distinguish between 2 VIs with the same name but with different code. Dynamically calling the VIs using VI Server, like you mentioned, will also potentially cause problems because the executables might try to load same VI name into LabVIEW memory at a time and this will still causes problems.
My suggestion would therefore to be to rename the utility VIs to another name and save it as a custom subVI in that program. Then, make sure to include that custom subVI in the App Builder executable and you should b
e golden.
Kileen C.
NI

How can I create banners with 100% height?

I want the homepage to load with 100% height and there buttons that anchor to sections further down the website that I also want to be 100% height when scrolled to.

3rd post on same question by same user :
Re: how can I Create function with an out Parameter
how can I Create function with an out Parameter

How to color single column cells with different colors in classic report based different conditions

Hi ,
Am working on Oracle Apex 4.2 version. Am trying to generate a classic report with different cell colors based on the conditions.
I tried the solution provided in the below link.
https://forums.oracle.com/message/9518723#9518723.
I tried the same query given in that link.
   SELECT e.*,
CASE
    WHEN sal < 1000
    THEN 'red'
    WHEN sal BETWEEN 1000 AND 2000
    THEN 'yellow'
    WHEN sal > 2000
    THEN 'green'
END the_color
FROM emp e
And, I hidded the column 'the_color' in Report Attributes,
          the Column Template1 has the code , <td #ALIGNMENT# headers="#COLUMN_HEADER_NAME#">#COLUMN_VALUE#</td>.
After this, what are the steps did I miss here. Because am not getting the report which I need.
Kindly do provide solution.
Thanks,
yashu.

SAL column values should visible with different color based on the conditions. Same way i did in my report it was working for me. Please refer the below links for more information,
https://forums.oracle.com/thread/1047891
http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:351800346145832
Thanks
Lakshmi

Is it posible to create objects with different names dinamically?

Hi,
I'm creating an app that manages different wireless nodes in a network and I was thinking that I could create a class called Node which would have a constructor that every time I created an object Node, I would pass the address and some other data about the Node and the constructor will save all that data and also create a unique ID for every Node object.
Now the problem is that I need to be able to discover all the nodes in my network every time the user clicks a Ping button. So every time the users clicks Ping I need to do a ping and create as many Node objects as nodes I have in my network. The thing is I don't know how to make it create the node objects with different names so after I've created all the nodes objects I can refer to one of them.
Something like this.
int Id=0;
id++;
Node node+Id = new Node();
I think its not possible to do something like that. If it isn't how can I do to refer to one of the objects I've created?
Thanks.

Twistx77 wrote:
Thanks to both of you. I'll check out the Link and if I can't find the solution there I'll make the array , I don't know how I didn't think about doing that. There are two collections you should study specifically:
First you have the ArrayList which in essense is a growable array. This means you don't have to decide in advance how big it can be.
Second there's the HashMap. It's sometimes called an associate array. Such an array doesn't have fixed position indexes like an ordinary array. Instead each index (called key) is associated with a value but the keys don't have any particular order. Still, given a certain key, finding the corresponding value in a HashMap is almost as fast as an array access.

How do you highlight several cells with the mouse in numbers

how do you highlight several cells with the mouse in numbers

Hi David,
Using only the mouse, you can select a contiguous range of cells using the method described by dwb.
For larger (but still contiguous) ranges you might prefer this method:
Click the first (top left) cell of the desired selection.
Scroll to the last (botom right) cell of the desired selection.
Shift-click the bottom right cell to select it, and all of the cells in the rectangular array defined by this and the top left cell selected in step 1.
To select two or more non-contiguous cells:
Click on the first to select it.
Command-click on another to add it to the selection.
Repeat as necessary.
Regards,
Barry

Advice on creating Answers with different line heights

Some of my answers have 1 line, some have 2, some even have 3 lines. Any recommendations on configuring my Quiz slide so that the boxes automatically resize?
Currently, I have two problems:
1) I need to manually page-layout every slide where one or more of the answers takes more than 1 line. This is taking a while.
2) I can't use "shuffle answers", because sometimes the 3 line answer is it's original space, and sometimes it's on a a one-line high answer line.
Any advice?

I try to avoid long sentences in MCQ but if necessary to have multiple lines (you can also reduce the font size) and I want shuffling this is my work flow:
select the answer caption with the greatest height
co-select the other answer captions and in right-click menu choose Aligh, Resize to same height
increase the height of the surrounding box (surrounds all the answer captions, this can also be done in the Quiz master slide, too bad there are no placeholders for the individual answer captions there)
move the bottom answer caption as far as necessary (will always use shortcuts like SHIFT-DOWN, CTRL-DOWN, DOWN not to disturb the alignment)
reselect all the answer captions, right-click menu, Align, Distribute vertically (or use the icons from the Align toolbar of course)
It is a pity that you cannot apply those style changes to all the MCQ slides, no Apply button in format accordion, no save default style in the top part of the Properties panel of the Answer captions. This means that the process has indeed to be done manually, but at least you can shuffle.
Lilybiri

How can I create pages with different backgrounds

Hello,
I'm creating flash site which will have different backgrounds for each page. I'll load the individual pages with "MovieClipLoader." My understanding about MovieClipLoaders is that, it doesn't matter the background of your mc, the page to which you are loading will maintain it's background.
How do I achieve that?
Thank you!

Hello,
Thanks for the reply, I think it's a very good suggestion. I'm going to try it out and I hope to fill you in.
Thanks once again.

ABAP WebDynpro: Table cells with different values.

Hello,
I am not sure how the following can be achieved.
I have a table with 10 rows in it. First column should have different values in cells (static value that do not come from anywhere). For example, colors: black, green, yellow, etc.
I inserted a table column. In that column I inserted a Cell Editor of type TextView. If I define a 'text' property of this element than it marks all cells in this column with this text. I need to assign different values to each cell.
How can this be done?
Thank you.

Probably you should post this the Web Dynpro Forum
Web Dynpro Java
Regards,
Ravi
Note : Please close this thread.

Why is my In design swatch panel creating swatches with different color builds than Pantone formulas

I am working in ID CS5 now but I have seen this problem in older versions as well. After creating a swatch, either process or spot, and using any of the Pantone selection choices, I get a different formula build than what is in the Pantone books. For example; PMS 110 PC is 2/24/100/7 in the book, but in InDesign it formulates as 0/12/100/7. Doers anyone have info on this?
S

maybe just as well, we are getting CS6 this month
CS6 includes Pantone+ Color Bridge libraries, which use CMYK Process definitions to simulate Pantone solid colors. The new solid library colors (i.e., Pantone+ Coated) are always defined as spot type with Lab definitions—you can no longer switch to CMYK definitions via Ink Manager for the those libraries.
Pantone+ Color Bridge Coated defines 110 as process CMYK 2|22|100|8. It's not surprising Pantone is always changing the CMYK simulation builds because the appearance of CMYK depends on the printing conditions. Personally I would go for a color managed conversion, allowing that much black in a saturated yellow seems questionable.

How to create BP with different BP Groupings (BU_GROUP) in IC?

Hi Experts,
when creating BP in the Interaction Center there exists the possibility in Customizing CRM->Interaction Center WebClient ->Master Data->Define Account Identification Profiles it is possible to add a Grouping ID for the creation of all different types of BP. But we have the requirement to use different kind of groupings for the different BP we create (one grouping is not enogh).
We have added the field 'Grouping' in the configuration and the value in the weblclient is put into the data collection but afterwards something is happening. As the customizing is without value the standard grouping is used as the wrong grouping is assigned to create the BP.
Does anybody know where I have to change the coding to change this?
Best Regards
Oliver

Hi, we have found the solution. In component ICCMP_BP_DETAIL we have redefined View BuPaCreate. In the class ZL_CRMCMP_B_BUPACREATE0_IMPL we have redefined method CREATE_PARTNER and changed the following coding:
IF lr_new_entity IS BOUND.
    CALL METHOD lr_new_entity->
    get_property_as_string
      EXPORTING
        iv_attr_name = 'BP_GROUP'
      RECEIVING
        rv_result    = lv_partner_grouping_str.
    me->typed_context->customervalnode->
    set_s_struct( attribute_path
    = 'STRUCT.BP_GROUP'
                                                 component = 'BP_GROUP'
                                                 value = lv_partner_grouping_str ).
ENDIF.

Newbie needs help creating folder with different date buckets

A simplification my scenario, I have a table, Invoice, which contains invoice amounts and invoice dates. I want to break up the invoices amounts into date buckets, such that my target report should look something like this:
Invoices<30 Invoices<60 Invoices<90 Invoices>90
$100 $250 $500 $1000
I have created a folder from the Invoice table, and would like to know if it is possible to create new items within this folder to allow me to sum invoice amounts over the 0-30, 30-60, 60-90, 90+ invoice date ranges. In other words, can I create new items that each have their own condition?
I have seen other solutions that use a custom folder backed by a SQL query using case statements to break a table down into its date range buckets. Is this considered the "right" approach to the problem?
A simpler solution I've thought of is creating a folder for each date range (Invoices30, Invoices60, etc), and setting the condition of the folder to do the date filtering. The item "Invoice Amount" in each folder ends up being the bucket I want, and I would put them together in a complex folder, and build the report off the complex folder. Although inelegant and a bit redundant, would this solution work?
Thanks everybody!

Hi Newbie
You can do this right inside Discoverer using a couple of calculations.
Calc 1:
=====
Calculate the invoice date variance, let's say you will use TRUNC(SYSDATE) - TRUNC(INVOICE DATE). This gives you a number and let's call this new calculation VARIANCE.
Calc 2:
=====
This second calculation created the buckets themself. Let's do it using a CASE statement and we'll call the calculation TIME BUCKET.
CASE
WHEN VARIANCE <= 30 THEN "0 to 30"
WHEN VARIANCE <= 60 THEN "30 to 60"
WHEN VARIANCE <= 90 THEN "60 to 90"
ELSE "More than 90"
END
You now display only TIME BUCKET in your workbook. The other calculation, VARIANCE, will be used but not displayed on screen in the final answer.
If you don't like CASE, here's the same answer using DECODE:
DECODE(VARIANCE,
LEAST(VARIANCE,30), "0 to 30",
LEAST(VARIANCE,60), "30 to 60",
LEAST(VARIANCE,90), "60 to 90","More than 90")
By the way, when you do this you will find that Discoverer runs your report very fast. This is because it can handle these types of queries exceptionally well.
I hope this helps
Regards
Michael

Creating Cells with differing heights in Numbers '09

Similar Messages

Maybe you are looking for