Creating characterstics used in Batch specific UOM

Hello All
        I am trying to create a characterstic which I can use in Batch specifice UOM for "Product Unit", when am trying to maintain product unit in material master the system throws a message which says:
No characteristic of batch class CL_CUT_LENGTH has organizational area 'Substance / steel'
Message no. LB140
Diagnosis
You must assign the organizational area 'Substance / steel' to characteristics for which you want to maintain proportion or product units.
Procedure
Please assign organizational area 'Substance / steel' to the corresponding characteristics of class CL_CUT_LENGTH.
      Kindly give your inputs on this matter so that I can proceed further. I am unable to figure out how to assign a characterstic to the organizational area "Substance/Steel". Looking forward to your valuable inputs.
Regards,
J K Tharwani

Hello All
      I havent assigned organizational area to the class & when I did that system allowed me to assign the same to the characterstics as well. My issue is resolved & am closing this thread. I am hereby proceeding for "Batch-specific UOM Product qty" & if am again stuck up I would defeinitely look forward to the forum to help me out.
Regards,
J K Tharwani

Similar Messages

  • Having more than one Unit of Entry (Batch specific UOM)

    Hello All
        I am using Batch specific UOM (Product Qty Conversion), am working with SQM & NOS as batch specific UOM & the Base UOM of matereial is KG.
        My requirement is that at the time of GR for the material I need both batch specific UOMs viz SQM & NOS as the Unit of entry alongwith Base UOM. Looking forward to your valuable inputs.
    Regards,
    J K Tharwani

    Hello Jiteendra,
    Could you pl share your findings? We here in Cheese manufacturing want to use multiple Batch specific UOM, while Milk receiving. Milk has components FAT, Protien, Other Solids and Water. I have created 3 Batch specific UOM AU1- FAT, AU2 - Protien and AU3 - Other Solids. When i receive Milk, i enter the percentages as the batch characteristics for all the 3 batch specific UOM and i can see the stock in each of those UOM's.
    So far so good....I have all these 3 Batch Specific UOM's defined in the Cheese BOM, with the same Milk material number and batch specific UOM.
    But when i try to consume the Milk Batch, i cannot consume the same Milk batch for all 3 components. Do you know how can i consume the same Milk Batch for all the 3 components in the process order for Cheese manufacturing?
    Thanks in advance.
    Regards,
    Mangesh

  • Batch Specific UOM - Rounding error

    Hi All,
    I just configured Batch Specific UOM to convert pipe material with base UOM of foot to alternate product UOM piece. Length of each piece varies from 30.000 to 35.000 feet.
    When I post goods receipt with 
    1. Unit of entry is alternate UOM (pieces) - system converts qty to feet using planned conversion factor
    2. Unit of entry is base UOM (foot) sytsem is rounding off qty in feet to zero decimals and then applying planned conversion factor. While removing decimal digits it gives message "Too many decimal plces for UOM foot" ( 100.78 feet will be changed to 101 feet)
    When batch is changed to input correct correct conversion - it changes qty in pieces instead of changing it in base UOM.  So now there is no way to enter qty correctly in base UOM with correct decimal places -such as 100.54 foot.
    Any help will be appriciated.
    Thanks,
    Ashutosh
    Edited by: Ashutosh_x on Dec 21, 2009 8:18 PM
    Edited by: Ashutosh_x on Dec 21, 2009 8:19 PM

    have you read this document, especially the Prerequisites?:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/7f/c23c08ddf411d285e20000e82013e8/frameset.htm
    I think you have to use Conversion Factors from Object Dependencies  instead of Conversion Factor from Two Units of Measure

  • Batch Specific UoM

    Finished products goods receipt is made in litres(BaseUoM).WE also have batch specific unit of measure-Kg.Is there any standard report available to see the finished products batches along with the batch specific unit of measure quantity

    hi,
    check in MB51....just give your material and execute. After this there is a Detail List (CtrlShiftF12).
    Then through Variant you can get Batches and Uom...
    Regards,
    Mridula.

  • BATCH SPECIFIC MATERIAL UOM

    Dear All,
    I created material, base unit of measure EA order unit BOX.1BOX = 40 EA
    create PO ORDER 10BOX, 10*40=400ea.
    now the problem while receiving GR, I will receive 10box but each box 41ea.so it mean i received 10*41=410ea.
    I WANT TO CHANGE PACKING FACTOE IN GR ITSELF.
    How to do this scenario?
    i think it will work through batch specific UOM.
    PLS HELP ME HOW TO CONFIGURE BATCH SPECIFIC UOM BY STEP BY STEP  FOR THIS SCENARIO
    THANKS,

    Hi Bhaskar,
    U definitely need batch specific unit of measure for ur scenario.  do the following config
    1) Activate batch specific unit of measure
    2) Create a new batch specific unit of measure in "Edit batch specific unit of measure"
    3) Define calculation of proportion quantity from base qty
    4) Maintain the batch specific uom in material master
    5) Create class with CL02 for batch specific uom - assign relevant characteristic in this class
    6) Assign this class to material
    At the time of MIGO select the class and assign the new conversion factor
    U can change the conversion factor with MSC2N also
    Hope this will help u
    award points if found useful

  • Batch-Specific Material Units of Measure

    Hi all,
    Can anybody guide me on Batch-Specific Material Units of Measure----Product/proportion units???
    What are the settings required & how it works??
    Regards,
    Manish

    Hi Manish,
    The batch specific UoM is used in the process industry where you need to know a characteristic of a batch which is used in evaluating the batch, like concentration or potency. For example, in a sugar syrup, the concentration of sugar may vary and hence it is required to knoe how much sugar is there in the syrup. So you make sugar concentrate as a characteristic in the batch class and use it in the proportionate UoM. So whenever you fill the value of the sugar concentrate in the batch master, how much sugar is there in the syrup is known.
    1.     Activate the use of batch-specific units of measure
                     Activate active ingredient management in Customizing using Transaction OMWS. Activate the use of batch-specific units of measure. This allows you to maintain proportion and product units in the material and use them in logistical processes.
    2.     Set up the base and proportion/product unit
            In Customizing, the proportion/product unit needs to be created as a unit of measurement. Enter your active ingredient unit of measure under the menu path General Settings  Units of measurement
    3. Create Batch Class and Characteristics
    4. Assign the class to the material master.
    Also set up proportion UoM in additional data of material master. Use the required batch char]acteristics.
    So whenever you a Goods receipt you may enter the batch characteristics manually. Or if you are using QM, you may have to activate the link between batch characteristics and inspection characteristics.
    Check the stock in proportionale UoM in MMBE
    Reagrds
    Vineet

  • Batch specific unit of measurement.

    Dear Gurus,
    My client is getting raw materials in ingots by unit of measurement in Weight.
    But at the time of issue we have to consider  lenght and weight. we can not use unit of conversion for the same because iron ingot diameter varies slightly, so we have decided to use the batch specific unit of measurement.
    But after creating class and characteristic system is not showing the same in proportion unit in master data.
    I think there may be somthing missing in the customization.
    Kindly elaborate customization so that i can check and correct accordingly.
    Thank you,
    Anup.

    maintian organisation area - S in the basic data of class( CL02) and also maintain same value (S) against the particular characteristic in the char tab .Now it will appear in the material master .
    appreciate if it is helpful

  • Batch-specific Unit of Measure

    Hi,
    What is Batch specific UOM? How do we configure in ECC 5.0? My requirement is as follows -
    1. GR qty should be in Base UOM (Kg) and Bags
    2. The qty/bag = 95 Kg (standard / Alt UOM) for material
    3. However, for shipment received Qty/Bag may very (90-99 Kg/bag)
    4. system should capture Kg & Bags and adjust batch specific UOM accordingly
    5 Reporting is required in Base UOM & bags across supply chain

    Rajendra
    Welcome to SDN
    Please see if these links help
    http://help.sap.com/saphelp_erp2005/helpdata/en/25/283d744f7811d18a150000e816ae6e/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/c8/3ad93f170f8f15e10000000a155106/frameset.htm
    Thnaks
    Sat

  • Activation of Batch Specific Unit of Measure in IS-Retail System

    Hi experts,
    In our scenario for Articles, Client work with kg, but also want to keep track of the number of pieces.
    I am trying to MAP this Process using Batch Specific Unit of Measure functionality in IS-Retail.
    Is it Possible to Use the Batch Specific Unit of Measure functionality in IS-Retail System.
    In Article Master, I couldnt find any "Classification View" or "Proportion/Product unit" Tab.
    Also is it possible to capture the Batch Characteristics through Interface ???
    -MSK

    dear friend,
    just in case look here:
    http://help.sap.com/saphelp_47x200/helpdata/EN/97/b7293772b7ce25e10000009b38f839/frameset.htm
    good luck!

  • Help required to create portal without using any vendor specific API's

    Hi All,
    I am trying to develope a portal without using any vendor specific API or tool like Weblogic workshop or Vignette Wizard. I would like to know whether Sun Microsystem provides any API for developing portal. I would also appreciate if I can get few links for developing portal using java API's...
    Thanks in advance...
    Dgk

    Sure Sun provides the tools: it is called the compiler. Now all you need to do is write the code for a portal. But since there are vendor specific solutions available that could make your life a lot easier, writing one yourself is like reinventing the wheel.
    Pardon my mild sarcasm, but avoiding API's not developed by Sun is not the general idea behind the Java platform. You are encouraged to use those API's.

  • Batch Specific Unit

    Hi
    I am working on Batch specific unit of measure.
    I want to use mg as Base unit and ML as production unit.
    If i use batch specific unit as ML system is not allowing to enter this in in propotion unit tab in material master as it belongs to Dimention.
    If i select unit of measure as B sytem is calculating reverse of  my expected result.
    Can anybody help on this..
    Rgds
    Gobi

    Hi Gobikannan,
    I am not sure but might be only Non Dimensional Unit are allowed for Batch Specific Unit.
    Check it by creating new Unit Something like AML (ML active ingredient)
    Regards,
    Dhaval

  • Batch specific units of measure

    Hi experts,
    I've been reading about Batch specific units of measure and I've make some tests following the indications in this blog:
    /people/raja.ramasamy/blog/2010/02/22/batch-specific-units-of-measure-step-by-step-configuration-for-steel-industry
    In our scenario we work with kg, but we want to keep track of the number of pieces.
    But we don't want to introduce the average weight of each batch, we would like to inform the total amount of kg and the number of pieces. Is possible?
    Thanks

    Hi,
    You can maintain info record for the same by using Tcode-ME11 . you can find conversion factor under Purchasing Org1.
    Example - Material XYZ, 50KG=1 BAG ,Base UOM in Material Master as BAG
    then conversion factor in Info record as follows
    Order Unit will be KG
    And conversion factor will be 50KG=1BAG.
    Regards,
    Sandesh Sawant

  • Batch-specific Unit of Measures

    Hi,
    1. I have activating batch-specific Unit of Measures, but in MIGO don't show me field for input batch unit. Can you tell me how and where set up - for working with batch-specific Unit of measures.
    2. Which tables link is between batch and classification, where I use class type 023-batch. (which fields can I join).
    Thanks for your advice.

    Batch Specific Unit of measures is what was originally called Active Ingredients Management.
    You need to set up QM and classification for this, MIGO will not give you additional field for entering quantity in separate UOM
    Lakshman

  • Just days ago, I downloaded and created folders for two batches of photos and now they are missing. They were not deleted by anyone, and even if they were, they were not found in my trash can. What happened? They were erased from my camera, so I am upset.

    Just days ago, I downloaded and created folders for 2 batches of photos I downloaded from my camera to iphotos but now both are missing.  They were not deleted and even if they were, were not found in my trashcan. I have looked through every folder and they are not there. Is there a bug that can get into iPhoto to do this? Is there a program Apple offers to retrieve lost photos? Thank you.

    debbie5891 wrote: ... They were not deleted and even if they were, were not found in my trashcan...
    How do you know they were not deleted? Is it possible that they were moved to the trash and the trash has been emptied, if not by you, perhaps by someone else?
    In the best case, you mean they were not deleted from your camera.  If so, it will be simple to merely download again from your camera after you have corrected any problem with your Mac or workflow.
    If you have a way to be certain that your two folders were not deleted from your Mac,  follow the directions provided by your Mac's Disk Utility to repair your Disk (not Disk Permissions.)  On more than one occasion, disk repair has restored the visibility of missing folders I knew I had not deleted.  If you have trouble with the process, post back which specific Mac OS version ( > About This Mac) you are using so we can offer specific help.
    It is also possible that the missing folders might be saved somewhere you do not expect them to be.
    It is also possible that they may merely be invisible and, thus, not showing in your Finder windows even after performing a Disk Repair.
    Here are some more ideas you can consider:
    Restart Mac and then look where you expect the folders to be.  They may be visible there now.
    If not, try a Spotlight search for the folder name(s) you used.  Spotlight may give you a list of places to look.  If you don't remember the folder name(s), try a search for the file type your camera uses for saved images.  My cameras save "jpg" files, but yours may save other image file types. 
    You can also open a finder window and use the window's search oval to search.  The method allows you to use the search "+" button to add invisible items via the "File Visibility"  choice.
    debbie5891 wrote:... I have looked through every folder and they are not there....
    If you are using any version of Mac OS X, I doubt this statement can be true.
    If you select your disk volume name (not the Media item) in the sidebar of your Mac's Disk Utility, you will see that the number of Folders and files on your disk is very large.  For example,I keep my startup disk small and write most of my files to other disks.  Even so, my startup disk contains more than 195,000 folders.
    If you mean you used some software to search each folder, please post back the name of the app you are using.
    debbie5891 wrote: ... Is there a bug that can get into iPhoto to do this? ...
    I have not had the problem you describe, nor have I heard of such an iPhoto Bug.
    I have used every version of iPhoto I have seen including the current new version: iPhoto '11 version 9.5 (902.7).  You can find the version you are using by executing the iPhoto > About iPhoto menu command and post it back here.
    debbie5891 wrote:... Is there a program Apple offers to retrieve lost photos? ...
    I am not aware of any Apple apps that work specifically on photo files.  If you know the pathname to the lost files, and if you are comfortable with Unix commands, you might be able to use your Mac's Terminal utility to retrieve at least some of your images.  However, it will be MUCH simpler to merely download another copy from your camera.
    You can search the Mac App Store for "unerase" to find several apps that can unerase files, including deleted photo files, in certain circumstances even after the trash has been emptied.  To determine whether one or more of them may meet your needs, see their product info and reviews for specifics about each one.
    debbie5891 wrote:...Thank you.
    You're most welcome.
    If you need to post back for more information, please provide specifics on your Mac OS, iPhoto version, which of the suggestions offered here you have tried, and any details not already provided about the problem status.
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • Batch specific production unit

    Proportionate unit/ production unit need to be used for calculating the
    Out put volume as per the specific gravity of the Formulations.
    The requirements are as below:
    The production out put quantity varies as per the specific gravity of
    the formulation.
    THE BATCH SPECIFIC PRODUCTION UNIT IS IN Liters.
    The confirmed quantity is in kgs and Gr quantity is in kgs.  Inspection
    lot created and while inspection the specific gravity of the formulation
    will be Tested and the value is recorded for the Batch.
    Based on this value the Batch specific unit needs to be calculated.
    Example: The batch for the quantity of 100 kg Confirmed and made Goods
    receipt.
    The inspection lot is 100 kg and in result recording specific gravity is
    1.1 gm/ milliliter.
    Hence the Batch specific production units (lts) is 100 kg /1.1 = 90 LTS
    Kindly suggest how to Map the Scenario.
    Regards
    Sasikanth

    Hi Gobikannan,
    I am not sure but might be only Non Dimensional Unit are allowed for Batch Specific Unit.
    Check it by creating new Unit Something like AML (ML active ingredient)
    Regards,
    Dhaval

Maybe you are looking for