Creating Chart in BeX Report

I have few questions regarding creating Chart in BW Report. One thing I need to make it clear it's a simple BeX Report not a WAD report.
(1) How should I create a chart in the Report?? Should I have to create it in the Excel Sheet once I run the report?
(2) Do I need to create the chart everytime manually once I run the report or is there any way we can save it and everytime we open the Report it should display the chart automatically !!
(3) When users drill up/ drill down or group data in different views, the Chart should be dynamically changed follow the change in data set. Is it possible to do that??
Thanks,

hi,
you can add a chart to your report. it is possible.check out these links for details..
http://help.sap.com/saphelp_nw04s/helpdata/en/43/68ce8391886e47e10000000a422035/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/38/0f3f28be7c5d47802f951c65d7a6f7/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a6789190-0201-0010-03be-bb1c5a65a615
hope it helps

Similar Messages

Creating variants in BEX reports in BI 7.0

hI ,
We are in BI 7.0 .
I am trying to create variant with SY-DATUM -1 in bex report .
Whenever I execure the report , the selection screen date should be syatem date - 1 in variant .
When i select the variant it should automatically pickup current date -1 . I was familiar with BW3.5 but BI 7.0 screen is totally different .
Please can anybody help to me resolve the issue

Hello Venkat,
You can create a customer exit variable for 0CALDAY and assign the value SY-DATUM - 1 in the exit . So whenever you execute the variable it will be filled with the current date - 1 value.
Goto the General Tab page and select the processing type as Customer Exit,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/789b3c4d4d8d15e10000000a114084/content.htm
Hope it helps
Thanks
Chandran
Edited by: Chandran Ganesan on Feb 6, 2008 7:45 PM

How To Enable Group Layout When Creating Chart in Crystal Reports XI

Hi
I Created a chart, and i placed the same on Report Header, when i want to change the layout Option As Group, it is disabled, how to enable the Group Layout Option.

Hello
You should have your group already created and your summary. you place your graph outside the group (RH or RF)
Luc

Data load from BPC into BI 7 cubes for Bex reporting

Hi,
Can we pull BPC planning data into the BI cubes so that Bex reports can be created for combined data from BPC cubes and BI cubes?
Also can we create Bex reports on BPC cubes just like we create for BI reporting cubes?
Let me also give an example of the scenario we face.
We have actuals data in a BI 7 basic cube(Actuals cube). Planning is done in BPC, so I understand that the planned data gets automatically stored in a BPC cube in BI7 system. I want to load the data from this BPC cube to BI Actuals cube and create a combined Bex report to show actuals and plan data.
Please let me know.
Thanks,
Archana

AS of now, if you report data in the BPC7NW cubes through BEx, you may not get the same result as you get from BPC reports. The reason being BEx won't do the same calculations (for example sign reversals) that BPC client would do. In addition, you won't be able to report the results of the dimension member formulas when you report through BEx. If you have to get data out from BPC cubes to other cubes, you can go through SQE (shared query engine) and that way, yyour results will match with what you get in BPC reports. Once you get data out through SQE into other cubes, you can use BEx to report if you wish.
More functionality will be available in near future to accomplish BEx reporting for BPC data.
Regards
Pravin

General Question on BPS - BEx reporting

Hi there matez,
I have :-
Planning Level Z: which contains the 2 following Package's
PACKAGE A: Actual Data
Version -> Plan
Currency -> USD
Fiscal Year/Period -> (replaced by Variable in Layout)
Fiscal Year Variant
Listing -> a Characteristic
PACKAGE B: Plan Data
Version -> Plan
Currency -> USD
Fiscal Year/Period -> (replaced by Variable in Layout)
Fiscal Year Variant
Listing -> a Characteristic
LAYOUT (Key Figures in Lead Column)
Version             -> Header
Currency            -> Header
Fiscal Year/Variant -> Header
Fiscal Year/Period -> Data Column
Listing             -> Lead Column
My Question specifically here is :-
1) When I execute my report, how do I know which PLANNING PACKAGE is the data coming from ?
2) So, if I were to now create in my BEx report a Column for <b>Month:Actual</b> Values and <b>Month:Plan</b> Values, how can I achieve this ?
3) In my current report, I see in certain cells the text ' ERROR' instead of the USD ?
Kindly advice.

Hi John
Q1
When i say report do u mean BIW Query or BPS Layout:
If BPS Layout:
Then whenever u create a planning folder u have to select the package. The data will come from the package selected
If BW Query:
Then package is irrelevant as the data will be from the cube.
Q2
In case u were to see plan and actual in the column then u can place the version char in column in ur query and restict it to the plan and actual version.
(In ur example u hv given veriosn as plan in both the package. I think it shld be Plan and Actual)
Q3
The reason u r seeing error in certain cells might b bcoz that data is coming without currency/UoM.
Hope this is helpful
Chirag S

Creating graphs/charts in BEx Analyzer - BI 7.0

There is no design item for creating graphs / charts in BEx analyzer. We don't have web server/portal.
There is a chart button in default workbook, which switches table/charts views.
How do I create charts in custom workbook.
Also, how do I do precalculation of workbook w/o Broadcaster.
Thanks
Swati

See if below links are useful for you -
Graphs in Workbook
Charts and Graphs in the Bex Analyzer
Chart
ANALYZER x GRAPHS
"How to create graphs in Reports"

Can I create one single crystal report using 2 bex queries

HI all,
I have 2 bex queries and has to develope a single crystal report .Is it possible???? If so, than how to connect two bex queries and develope one single crystal report.Any other option is also fine. I mean ....no need to use crystal..( I can go for one single webi..).But need to know the approach ...
or else...can I create universe on 1 bex and other universe on other bex ..and go for one single webi report..
Only problem is client is particular about one single report(either crystal or webi)
if i go for webi ...I know we can use link universe option but I dont know whether it works fro OLAP environment.
Please let me know if I can link OLAp universes and go for 1 single webi report.
Any help is appreciated.
Thanks in advance,
Mahathi

You can use either CR or WebI.
In CR Designer create the report using the SAP toolbar (Create report from query) based on the 1st BEx query. Then use the Database expert (first entry in the Database menu) to add an additional connection to your 2nd BEx query (+Create new connection->SAP BW DX query). You can then join the results of the 2 different queries in the database expert also.. Please note that if you do NOT want to join the result sets, then it is more efficient to use subreports. Create two different CR reports, each based on one of the BEx queries and then use one of those as your main report and insert the other one into it as subreport. Once embedded you do not have to keep the separate .rpt file of your second report.
For Webi you must build 2 universes, each based on one of your BEx queries. In your report you can add multiple queries based on different universes. You can join the results sets here by using the Merge dimensions button in the report editor area.
Regards,
Stratos
PS; Keep in mind that joining a large number of rows at report level (either in CR or WebI) can cause performance problems. If this is your requirement, how many rows do you expect to get back from each individual query?

BPC 10.1 Unified Model - Is it a must to have BEx query to create an input form/report?

Dear All,
Have a cube(Unified) created in BW 7.4.
To create an input form using that cube(unified), Is it mandatory that I need a BEx query for the input form/report?
i.e. To create an input form/report in BPC 10.1 Unified environment using a Unified model, is it a MUST to have a BEx query in place? Or, can I create an input form using 10.1 Unified model without BEx query using 10.1 Unified model?
Thank you!
Regards,
Peri

Hi Peri,
It doesn't matter what you include in the rows and what in columns or free characteristics: think of it as a sub-cube of the original cube. You are basically listing Dimensions you need in a group of you reports and can add new measures.
In BPC report you'll arrange them on the screen, format, protect, etc.
So, some of it is a repeat (not all tho), but for different purposes.
Hope this helps,
Gersh

BEx WAD -- Creating Chart And Table on the same page

Hi All.
I am creating a new Web Application. This contains a dropdown with 2 reports to select.
When the user selece report from the dropdown list, it has to display both Table and Chart for the report.
Could you pls explain me how can I do this.
Thanks
SR.

Go to Dropdown web item properties and choose your report and use Before Command and use OPEN_CHART_DIALOG. You may try with After Command also.

PIE Chart Drill down in bex report

Hi Friends,
In my bex report i have pie chart for year 2008.
Shall I drill down on this report means if i click on one part of the pie chart will i go to another report or another pie chart.
Can any one pls tell me is it possible .
Thanks & Regards,
Ramnaresh.
Edited by: ramnaresh porana on Dec 1, 2008 6:35 AM

Hi ,
Thanks for reply.
how it is possible from context menu of the pie chart , i have seen the context menu of the pie chart but i did not get any related option for this one.
Can you pls guide me.
Thanks & Regards,
Ramnaresh.

How to embed chart/grafic into bex report (workbook) based on query result?

Hi friends,
Since I have never embedded any Charts/Grafic based on query report, I am wondering if you could share your knowledge?
Thanks for your help in advance!
Regards,
Sally

Hi Sally,
You can create chart into workbook based on the query data.
Execute the query it will show result in excel sheet. In the tool bar of the sheet you find 'Chart wizard' icon . Select the icon, it will ask for the type of the graph. After select the ranges of the data from result. It will display the graph. Then you can save the workbook.
Graphs can be embedded in different sheets.
Hope it helps.
Regards,
Aditya

Can u send step by step scnarious on how to create Bex reporting?

HI,
Experts,
I have out hoe to extract data from different source systems and loading data into Info cubes but i not understanding how to create/go through BEx web reporting and web templets send me step by step scenarious to work on it.For this i have searched lot of sites but i couldn't find it thats he reason i am posting this post.
Thank u
shabeer ahmed

Hi,
Kindly use the search option as this topic has been discussed often here. I am locking this thread.
Bye
Dinesh

Help needed to create chartes in bw

Hello
i have charecter IO matid, salesorder, KF-IO price, quantity..
I want a graphical representation in BEx.
how can i do that?
and
BDS Business Document Store --what it is? and where can i get the info on it?
kasinath

Hi kasinath,
BDS is the storage place for all documents, like templates, iamges, documentation created for BW objects etc. BDS has its own user interface Business Document Navigator (BDN) which contains all essential BDS features. Check out:
http://help.sap.com/saphelp_nw04/helpdata/en/dd/f5253715dfb808e10000009b38f889/content.htm
You can create charts in the web reports. First you need to set up the BW query with the desired InfoObjects. The you need to open up the web application designer and create a web template with the chart icon. Assign your BEx query as the data provider for this. Check out the following for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b26a3b74a4fc31e10000000a114084/content.htm
Hope this helps..please do not hesitate to assign points for all posts that have helped you.

Custom drop down list for the filter for BEX report

Hi, all:
I am writing a query for a BEX report that prompts the user to enter a value for a field "GL account". I would like to have the user select from a limited number of GL options rather than have the whole Chart of accounts show up. Is there a way to make a "custom" drop down list for the filter?
Thanks!
Jenny

You need to make your GL account info object as an authorization object. And in the info object ,for BEx you need to select the option "only authorized values".
Create an analyis authorization on gl account and assign the restricted set of GL accounts to the user. Asign this analysis authorization to the user.In the query restrict this infoobject with an authorization variable. This would solve your purpose.user would be able to see only a selected set of GL accounts for which he is authorized.

What is BEX reports and workbooks and web templates

please send me in 2 lines of each,..thx

All 3 are the different forms of Result display
Bex Reports: It is based on MS excel functionalities and output is in Excel form. All reporting functionalities like swaping, exception, condition, etc..can be used.
Workbook: Bex reports can be formated as per need..say making bold, creating your own layout, adding images. In short all excel functions. This workbook gets refresed when new data loaded to datatarget
Web Template: Here charts, combos, dropdown...wtc ca be added what is called as Template.
Regards
Pankaj

Creating Chart in BeX Report

Similar Messages

Maybe you are looking for