Creating cluster over subnet, controller cant find cluster!

Hi,
Running a macbook pro running 10.6.5 with a subnet of mac mini's (all ppc) via a netgear gigabit switch.
Have set up the three minis to service only and in QAdministrator I can see them all together in the service browser.
However, with my mac book pro set to controller i cant see anything but my mac books cores in the service browser. Am I doing something wrong? Is this a fools errand? Any help greatly appreciated.

I believe it's part of the pro apps: FCS, Logic, Shake, etc.
What I'm suggesting is leaving the minis alone. Removing QM from the MacBook Pro, and then using the same disc that you used to install QM on the minis to reinstall QM on the MacBook Pro. That may entail pulling more off than QM, like the whole prokit module. FCS Maintenance pack is good at pulling off selected sections.
Conversely, you could just try updating the minis with a later copy of QM. It's been noted that the later versions apparently work on PPC machines. However, the installer baulks and sees that PPC and refuses to continue the installation. Someone listed a workaround here very recently. And you could try doing a migration to the other machines. That might pull along the parts you need.

Similar Messages

Create G/L Account Centrally cant find "Field Status group"

Dear All,
When i create G/L Account Centrally i can no t find "Field Status group" as the picture showed. Before i do this, i have already defined the field status groupd and assign this to the company code J610. However i can not find "Field Status group" in Tcode FS00.
Please help me on this! Very appreciated!

Hi,
Please check as per steps given below :
1. Go to transaction code OBD4
2. Double Click on Account Group
3. Double Click on Document Entry
Check whether Field status group is Suppress.
Regards,
Tejas

Can you cluster two nodes from subnet A with the cluster itself residing in subnet B?

We have a situation in a cloud deployment where the servers are automatically provisioned through a cloud portal with IP addressed from subnet A. Because we require static IP for clustering, the static IP can only be provisioned from subnet B for
use by the cluster. Is it possible to create a cluster from the two nodes in subnet A from a cluster IP in subnet B? I cannot find any mention of this particular network configuration for a Windows cluster. We are using the cluster to support
SQL Server 2012 AlwaysOn Availability Groups.

Hi Sir,
>>the servers are automatically provisioned through a cloud portal with IP addressed from subnet A.
Did you try to create a new VM then give it an static IP from subnet B then check if the VM can be accessed from outside ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Could not find cluster

I have one type of file that fails out in a weird way when attempting to transcode to h.264. Sometimes. Occasionally we get this error in Search All Jobs...
ERROR: E_REQ_ERROR Encountered error using Compressor: Could not find cluster "Render Cluster".
I know it's not very imaginative, but our cluster is named Render Cluster.
Node 1 is the controller and a compressor.
Nodes 2, 3 and 4 are compressors only.
All files transcode well. Usual source codec are DV25 (NTSC and PAL), DVCProHD, ProRes 422 LT, h.264, MPEG-4 and MPEG-2. The one file that sometimes gives us that weird error about not being able to find the Compressor cluster is
AVC Coding, 640 x 480, Millions
AAC, Stereo (L R), 44.100 kHz
We have the AVC component on the FCSvr server, as well as each of the Compressor nodes. Restarting the nodes hasn't helped. Restarting the FCSvr server hasn't helped. Some files are just cursed.
The files that transcode successfully have the exact same properties as the ones that won't transcode. The files that won't find their way to the compressor cluster consistently fail out. It's not a "sometime this file works and sometimes it doesn't" situation.
The strangest part of this problem is that other files before and after will successfully transcode.
Thank you.
-Cory

Hello Akhtar,
Have you tryed to delete the heador row from your file?
I received the same error when loading a csv file, but when I delete the heador row it worked.
Best Regards,
Juliana Genova

Can I create different Coherence nodes in the same cluster with defferent?

Can I create different Coherence nodes in the same cluster with defferent cache-config.xml file ?
Can a cache be distributed in these deffirent nodes?

Yes. You can create different Coherence nodes in the same cluster with defferent cache-config.xml files as long as you use the same tangosol-coherence.xml file and the same tangosol-coherence-override.xml file. But you cannot store the cache data in the different nodes (started with different cache-config file). In other word, a node only create caches in their own's modes which are started with the same cache-config.xml file.
See the following demo:
I start a cache server using the cache config file examples-cache-server.xml. Then I start a storage-disabled cache console (cache client) using the cache config file coherence-cache-config.xml. Both of them using the same tangosol-coherence.xml file and the same tangosol-coherence-override.xml file.
The cache server uses a cache service PartitionedPofCache. But the client side is using the Distributedcache service. The cluster address is same 224.3.5.2.
The cluster name is also samme. They know each other.
D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
The system cannot find the file D:\coherence.
The system cannot find the file C:\Oracle\Middleware\jdk160_11.
2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational configurat
ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2009-12-22 12:09:31.450/5.037 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational overrides
from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-12-22 12:09:31.470/5.057 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration override
"/tangosol-coherence-override.xml" is not specified
2009-12-22 12:09:31.540/5.127 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration override
"/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-12-22 12:09:33.864/7.451 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=n/a): Loaded cache configuration
from "file:/D:/examples/java/resource/config/examples-cache-config.xml"
2009-12-22 12:09:39.983/13.570 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined t
he cluster with senior service member n/a
2009-12-22 12:09:43.187/16.774 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Created a new cluster
"cluster:0xD3FB" with Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Locatio
n=process:144, Role=CoherenceServer, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) UID=0xC0A8085000
000125B75D888C60501F98
2009-12-22 12:09:43.508/17.095 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=1): Service Mana
gement joined the cluster with senior service member 1
2009-12-22 12:09:46.582/20.169 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:PartitionedPofCache, member=1
): Service PartitionedPofCache joined the cluster with senior service member 1
2009-12-22 12:09:46.672/20.259 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:PartitionedPofCache, member
=1): Loading POF configuration from resource "file:/D:/examples/java/resource/config/examples-pof-config.xml"
2009-12-22 12:09:46.702/20.289 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:PartitionedPofCache, member
=1): Loading POF configuration from resource "jar:file:/D:/coherence/lib/coherence.jar!/coherence-pof-config.xml"
2009-12-22 12:09:47.734/21.321 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=1): Started DefaultCacheServer.
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}
MasterMemberSet
ThisMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process
:144, Role=CoherenceServer)
OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
ss:144, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=1, BitSetCount=2
    Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
e=CoherenceServer)
RecycleMillis=120000
RecycleSet=MemberSet(Size=0, BitSetCount=0
Services
TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8088}, Connections=[]}
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
DistributedCache{Name=PartitionedPofCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCo
unt=1, AssignedPartitions=257, BackupPartitions=0}
2009-12-22 12:12:29.737/183.324 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=20
09-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole) joined
Cluster with senior member 1
2009-12-22 12:12:30.498/184.085 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service M
anagement with senior member 1
2009-12-22 12:12:31.860/185.447 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to me
mber 2 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=2463]}
2009-12-22 12:12:51.338/204.925 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service D
istributedCache with senior member 2The following command starts a cache client.
D:\coherence\bin>coherence.cmd
D:\coherence\bin>coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational configurat
ion from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence.xml"
2009-12-22 12:12:21.355/3.726 Oracle Coherence 3.5.2/463 <Info> (thread=main, member=n/a): Loaded operational overrides
from resource "jar:file:/D:/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
2009-12-22 12:12:21.365/3.736 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration override
"/tangosol-coherence-override.xml" is not specified
2009-12-22 12:12:21.415/3.786 Oracle Coherence 3.5.2/463 <D5> (thread=main, member=n/a): Optional configuration override
"/custom-mbeans.xml" is not specified
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-12-22 12:12:29.316/11.687 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined t
he cluster with senior service member n/a
2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Failed to satisfy the
variance: allowed=16, actual=20
2009-12-22 12:12:29.356/11.727 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Increasing allowable v
ariance to 17
2009-12-22 12:12:29.807/12.178 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Time
stamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, Role=CoherenceConsole,
Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(I
d=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Role=CoherenceS
erver, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
Management with senior member 1
2009-12-22 12:12:29.977/12.348 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
PartitionedPofCache with senior member 1
2009-12-22 12:12:30.578/12.949 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=2): Service Mana
gement joined the cluster with senior service member 1
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}
MasterMemberSet
ThisMember=Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=proces
s:1188, Role=CoherenceConsole)
OldestMember=Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=proce
ss:144, Role=CoherenceServer)
ActualMemberSet=MemberSet(Size=2, BitSetCount=2
    Member(Id=1, Timestamp=2009-12-22 12:09:38.06, Address=192.168.8.80:8088, MachineId=24656, Location=process:144, Rol
e=CoherenceServer)
    Member(Id=2, Timestamp=2009-12-22 12:12:29.541, Address=192.168.8.80:8089, MachineId=24656, Location=process:1188, R
ole=CoherenceConsole)
RecycleMillis=120000
RecycleSet=MemberSet(Size=0, BitSetCount=0
Services
TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=192.168.8.80:8089}, Connections=[]}
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
Map (?):
2009-12-22 12:12:49.505/31.906 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=2): Loaded cache configuration
from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
2009-12-22 12:12:51.358/33.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache, member=2): Service Distribut
edCache joined the cluster with senior service member 2
<distributed-scheme>

<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
    <local-scheme>
      <scheme-ref>example-binary-backing-map</scheme-ref>
    </local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>But when I try to store data into cache from the client side, it report error message: it's staorage-disabled. It shows that this cache console cannot store the data in the existing cache server because then using different cache config files.
Map (ca3): cache ca2
<distributed-scheme>

<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
    <local-scheme>
      <scheme-ref>example-binary-backing-map</scheme-ref>
    </local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (ca2): put 1 one
2009-12-22 14:00:04.999/6467.370 Oracle Coherence GE 3.5.2/463 <Error> (thread=main, member=2):
java.lang.RuntimeException: Storage is not configured
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
Storage(DistributedCache.CDB:9)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
uestTarget(DistributedCache.CDB:34)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
ibutedCache.CDB:22)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.put(Distr
ibutedCache.CDB:1)
        at com.tangosol.util.ConverterCollections$ConverterMap.put(ConverterCollections.java:1541)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.put(Distrib
utedCache.CDB:1)
        at com.tangosol.coherence.component.util.SafeNamedCache.put(SafeNamedCache.CDB:1)
        at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:581)
        at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
        at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)

I cant find create a Windows 7 or ... in my bootcamp

i want install windows 8.1 on my macbook pro mid 2010 but i cant find create a Windows 7 or ... in my bootcamp
I have yosemite on my macbook

Your Boot Camp Assistant is prompting you to remove Windows 7 or later version. If on your mac there is already a Boot Camp partition then you need to remove it first and then start the process again.
If you have Windows 7 on it, you might try to upgrade to windows 8: Boot Camp 5.1: Frequently asked questions about installing Windows 8 - Apple Support
There is also one more thing... Your Mac model has a built-in SuperDrive. I might be wrong but the option to create a bootable usb drive from Windows ISO file might be only available for 2012 models of Macs without a SuperDrive. In that case, you might have to Burn your Windows ISO and install it from DVD.

Cluster over-committed with 50+GB of RAM Remaining?

I have 2 2-node Hyper-V R2 clusters. When I add a guest with 4GB of RAM, I get an over-committed status in VMM 2008 R2 even though there is 50GB of RAM left on one node and 60GB on the other node. If I reduce the RAM to 2 GB the clusters are
no longer over-committed. The behavior is the same on both nodes. These guests are all test, not connected to any virtual switch and running no workloads. Just an OS sitting there doing nothing. There are 20 of them, but the host
Ratings seem to be very low and available resources seem to be very high to get any over-committed status. Have you seen anything like this? I suspect that the resource that is overloaded is RAM, but are there any details scripts that will tell
me exactly what resource is causing the over-committed status? I have R1 clusters with production workloads and using much more RAM that have a higher rating and are not over-committed.
Thanks.

The issue that you’ve outlined sounds like the cluster nodes are already at maximum capacity before you add the new guest with 4GB RAM.
Based on the host reserves, VMM calculate the available resources and then will use the “over-committed” status.
We have a great
TechNet article outlining this status and why it occurs.
HAVM Placement and “Over-committed” Status
When placing a highly available virtual machine, the placement process in VMM calculates whether adding a new virtual machine to a host cluster will over-commit the
cluster based on the cluster reserve configured for the host cluster in VMM. The
cluster reserve specifies the number of node failures a cluster must be able to sustain while still supporting all virtual machines that are currently deployed on the clustered hosts. If a host cluster cannot withstand the specified number of node
failures and still keep all of the virtual machines running, the cluster is placed in an Over-committed state, and the hosts are not available for placement. An administrator can override this and place an HAVM on a host in an over-committed cluster during
manual placement. Cluster reserves are a unique feature of VMM.
For example, if you specify a node failure reserve of 2 for an 8-node cluster, the rule is applied in the following ways:
If all 8 nodes of the cluster are functioning, the host cluster is marked Overcommitted if any combination of 6 nodes (8-2) in the cluster lacks the capacity to accommodate
existing virtual machines.
If only 5 nodes in the cluster are functioning, the cluster is marked Overcommitted if any combination of 3 (5-2) nodes in the cluster lacks the capacity to accommodate existing
virtual machines.
VMM’s cluster refresher updates the host cluster’s Over-committed status after each of the following events:
A change in the cluster reserve value
The failure or removal of nodes from the host cluster
The addition of nodes to the host cluster
The discovery of new virtual machines on nodes in the host cluster
The cluster reserve is set on the
General tab of the host cluster properties. For a procedure, see
How to View and Modify the Properties of a Host Cluster (http://go.microsoft.com/fwlink/?LinkID=162986).
Thanks,
Mike Briggs [MSFT]
http://blogs.technet.com/scvmm
http://blogs.technet.com/mbriggs
** This information provided "AS IS" with no warranties, and confers no rights **

I cant find my password because i mistyped my apple ID when i created it

I cant find a way to get my password for my itunes account because i misstyped my ID (MY EMAIL) when i created it

Is this a second hand phone and it came to you with app installed on it? If that is the case all apps are linked to the ID that was used to download them and can only be updated with that ID. If you do not know the passowrd for that ID and you do not wan tthe apps then delete them. If you want them then download them again with your ID

Cluster Over WAN Test

We are planning to put a subscriber across WAN.We have enough bandwidth (6MB) bewteen sites and we followed all the SRND recommendations(especially QOS) for Cluster over WAN.
I used extended ping with type 3 (as in SRND) to test the RTT from a switch at remote site to publisher CM and it came less then 40 ms.
Is there any other test we can do so we can test the RTT and bandwidth is enough for ICCS traffic.
Thanks for the help
Bala

you could put a good load of data on the wire across the wan, see if you can get 3-4mb (or whatever your maximum is) and then test your pings.
use the results added to the number of phones (BHCA) and see what the numbers 'should' look like.
be sure to use the bandwidth calculator if you haven't already. try for many or all different codecs.
see the bandwidth calculator at the following link: (requires cco account)
http://tools.cisco.com/Support/VBC/do/CodecCalc1.do

Uccx cluster over wan. cad login problem

Hi. I have uccx 8.5 cluster over wan. When the uccx publisher is down, agents can't login- invalid password. Please help.
Sent from Cisco Technical Support iPhone App

Hi,
Where are your agents situated in respect of the CCX and CUCM servers? Agents authenticate via CUCM or AD if AD authentication is enabled on CUCM have you confirmed that these are also reachable from the location in question? Have you verified serviceability on the secondary node to ensure the ccm engine and desktop services are running and in-service?
Regards
Allan
Sent from Cisco Technical Support iPad App

I created a new Screen Name and I cant find out how to ....

I created a new Screen Name and I cant find out how to send my buddy list from my old screen name to my new one. PLEASE SOMEONE HELP ME, BECAUSE I CANT TALK WITH MY FRIENDS!

Hi Scott,
Welcome to the Apple Discussion Pages.
Use the Address Book.
iChat and the Address Book are linked. If you have stored Real names in the iChat info about your contacts they shuould be in the Address Book. You can then drag them back to to the new Buddy list.
The AIM application allows you to backup the Buddy list of one account/screen name and then import it into the new one as another workaround.
Ralph

Cant find driver for my Multimedia Audio Controller n have there for no sound!

Hi
I have a Toshiba Satellite Pro A300D 152.
My speakers , built in webcam and mic all stopped working at the same time.
When i checked out device manager i saw that something was wrong with the Multimedia Audio Controllers driver so i uninstalled it and went on toshibas page to install the new driver for it but i cant find it anywere!
I use the computer to work with music so it is important to get it fixed as soon as possible.
If someone knows were i can find that driver I would be so happy!
Best regards,
Hemmi

Satellite Pro A300D-152 (Danmark)
Satellite Pro A300D-152 (Sverige)
Satellite Pro A300D-152 (Norge)
This is the site for USA machines, Hemmi. The drivers and utilities for that Scandinavian model are here.
The audio driver is here.
Conexant Sound Driver for Windows Vista 32 Bit, 4.36.10.0, 25/05/09
You may want to post in the European forums in the future.
Toshiba Support Forums in Europe
-Jerry

Cant find bundles for base name for WD Component

Some of my web dynpro components are throwing this exception:
<b>java.util.MissingResourceException: Cant find bundle for base name com/company/application/WoBaseView.wdview, locale en</b>
When looking under the src > packages > com > company > application all bundles are included:
WoBaseView.wdview.properties
WoBaseView.wdview
WoBaseView.wdview.xlf
We are running NW SP15
Any help are welcome
Thanks in advance

Hi Sumit,
The error is not generated when we are running the application instead it is generated when we are selecting the Language Resource tab.
Content Administration > Web Dynpro > Deployed Content. When selecting the details console for the application or the component and selecting the <b>Language Resources tab</b> I got the following exception:
java.util.MissingResourceException: Can't find bundle for base name com/company/application/WoChangeSyspos.wdview, locale en
     at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:839)
     at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:729)
     at java.util.ResourceBundle.getBundle(ResourceBundle.java:702)
     at com.sap.tc.webdynpro.serverimpl.core.localization.AbstractResourceHandler.initResourceBundle(AbstractResourceHandler.java:471)
     at com.sap.tc.webdynpro.serverimpl.core.localization.AbstractResourceHandler.loadResourceBundle(AbstractResourceHandler.java:176)
     at com.sap.tc.webdynpro.tools.explorer.Detail.initializeBundleTextsInContext(Detail.java:266)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalDetail.initializeBundleTextsInContext(InternalDetail.java:247)
     at com.sap.tc.webdynpro.tools.explorer.languages.SelectDCView.onDeplyoableObjectPartSelected(SelectDCView.java:191)
     at com.sap.tc.webdynpro.tools.explorer.languages.wdp.InternalSelectDCView.wdInvokeEventHandler(InternalSelectDCView.java:209)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Component.fireEvent(Component.java:271)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalDetailInterface.wdFireEventDeployableObjectPartSelected(InternalDetailInterface.java:211)
     at com.sap.tc.webdynpro.tools.explorer.DetailInterface.fireDeployableObjectPartSelected(DetailInterface.java:153)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalDetailInterface.fireDeployableObjectPartSelected(InternalDetailInterface.java:136)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalDetailInterface$External.fireDeployableObjectPartSelected(InternalDetailInterface.java:261)
     at com.sap.tc.webdynpro.tools.explorer.Explorer.onDeployableObjectPartSelected(Explorer.java:211)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalExplorer.wdInvokeEventHandler(InternalExplorer.java:210)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.invokeEventHandler(DelegatingComponent.java:122)
     at com.sap.tc.webdynpro.progmodel.controller.Component.fireEvent(Component.java:271)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalOverviewInterface.wdFireEventDeployableObjectPartSelected(InternalOverviewInterface.java:214)
     at com.sap.tc.webdynpro.tools.explorer.OverviewView.onActionSelectDeployableObjectPart(OverviewView.java:189)
     at com.sap.tc.webdynpro.tools.explorer.wdp.InternalOverviewView.wdInvokeEventHandler(InternalOverviewView.java:275)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleAction(WebDynproMainTask.java:101)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.handleActionEvent(WebDynproMainTask.java:304)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:649)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:248)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:55)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Ethernet Controller Cant be found in Drivers

I can not find the Ethernet Controller for this PC running Windows 7(64bit)
Operating System
Windows 7 Home Premium (x64) (build 7600)
Install Language: English (United States)
System Locale: English (United States)
Installed: 1/28/2015 8:00:12 AM
Boot Mode: BIOS (Secure Boot not supported)
System Model
Compaq Presario 061 PY059AA-ABA SR1550NX NA530 0nx1411RE101SALMO00
System Serial Number:[Personal Information Removed]
Enclosure Type: Desktop
Processor
2.40 gigahertz AMD Athlon 64
128 kilobyte primary memory cache
512 kilobyte secondary memory cache
64-bit ready
Not hyper-threaded
Main Circuit Board
Board: ASUSTek Computer INC. Salmon 1.04
Bus Clock: 200 megahertz
BIOS: Phoenix Technologies, LTD 3.12 04/20/2005
Controllers
ATA Channel 0 [Controller]
ATA Channel 1 [Controller]
SiS PCI IDE Controller
Network Drives
None discovered
Bus Adapters
SiS 180 RAID Controller
SiS 7001 PCI to USB Open Host Controller (3x)
Standard Enhanced PCI to USB Host Controller
Display
Standard VGA Graphics Adapter [Display adapter]
Samsung SyncMaster [Monitor] (20.0"vis, s/n MY20HVKQ801988, August 2008)
Other Devices
VIA 1394 OHCI Compliant Host Controller
HID-compliant consumer control device
HID-compliant device
USB Input Device (3x)
HID Keyboard Device
HID-compliant mouse
USB Composite Device
USB Mass Storage Device (2x)
USB Root Hub (4x)
E:\
F:\
G:\
H:\
USB-THARSHIms

Please see response created in your first thread: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Ethernet-Controller-Cant-be...

How do you get the screensaver that takes your iPhoto pictures and make one big picture? Used to have it on 10.6.8 but cant find it

Used to have it on 10.6.8 but cant find it. It took all the pics from iPhoto I think then made a pic out of them as a screen. Help?

Ah, welcome to my world...the world of progressive vs interlaced, RGB vs YUV, compression/decompression,10 bit or 8 bit, 4:4:4 vs 4:0:1 vs 4:1:2, color space (etc, etc, etc..!)
There's HD, DV, HDV, NTSC, PAL and more - its a place where acronyms roam free and multiply daily.
You're in for a fascinating journey that will soon have you understanding things you never dreamt you'd need to know, then when you think you've got to grips with 'em, you'll discover you don't really know the first thing about them...!
Fortunately you've got Bogie, Patrick, Shane, David and more to take you along for the ride.
I will suggest (and probably be corrected) that what you're seeing is probably interlaced footage on your progressive monitor. (You mentioned you're watching the DVD on your computer.) Your TV has far fewer lines of resolution than your computer monitor, so FCP works within those constrictions. Also your TV runs at 29.97 frames a second, which is actually 60 frames a second as each frame is divided into two fields, which comb together to for one frame. These combs are very much evident when watching a DVD on a computer. Even high budget Hollywood films have this problem, especially when the camera or subject is moving. There is no way around this if you're outputting on DVD or NTSC.
You could create an Progressive file, which won't do this on your monitor, but thats a whole other ball of wax...
Welcome though. Its all good. (And the people on this site are very helpful, I've learnt a lot over the last 5 years by simply reading these posts.)

Creating cluster over subnet, controller cant find cluster!

Similar Messages

Maybe you are looking for