Creating cofiles for single system configuration

Hi All,
we have sandbox system where it's congifured like single system in STMS.
when we try to release the requests it's showing local object request number relesed but i am unable to find the cofiles and data files at os end.
Since our system in configured as single system with out target system cofiles will not be created, but i have tried with virtual system and create the transport route but still unable to find the cofiles.
Is there any way to make cofiles available at OS end for single system configuration which having one physical system and one virtual system ....
Please suggest..
Thanks,
Subhash.G

Hello John,
Please go through my weblog:
<b>Configuring ESS in SAP Enterprise Portal 6.0>
Hope this may solve your problem.
Best Regards,
Srinivas.

Similar Messages

Could not create JCOClientConnection for logical System:

Hi,
I am facing a wierd problem in using the JCO destinations.
I created a page where it is using some JCO destinations say SAP_R3_HumanResources.
when i open the page it is working for the first time .without closing the page if i open the same page again it is giving the following error
Error connecting using JCO.Client: null
Error connecting using JCO.Client: null
Pernr:Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.swissre.CustomData. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Please let me know how to solve this issue
Thanks
Bala Duvvuri

Hi Bala,
It seems that this is a custom webdynpro application which when executed causes such problem. This might be due to JCO connection not released back to the pool.
Please refer to the following threads and that might be helpful.
Re: JCO Connection close
How to close a model object connection for Adaptive RFC?
You might have to call disconnectIfAlive method on your model.
Regards,
Jigar

How to create Rfc for EP system in Solution manager

Dear experts,
I am doing ChaRM configuration for my EP system ( java only).
I also configured CTS+ successfully but we want to integrate this with Chram in solman.
I have done all configuration according to standard doc for ChaRM.
But when creating project from solar_admin it is giving "   NO RFC for DEP system"
so please suggest me how to create RFC for java system in Solution manager.
thanks in advance
dhiraj

Hello,
You need to setup an ABAP communication client and system, that's done through the TMS settings:
For source system:
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                          1
- COMMUNICATION_SYSTEM:              (SAPSID of the ABAP communication system (e.g. the domain controller))
- NON_ABAP_WBO_CLIENT                    (Client of the ABAP stack on which the Transport Organizer Web UI (CTS_BROWSER) is activated and will run.)
- WBO_GET_REQ_STRATEGY                 TAGGED
- WBO_REL_REQ_STRATEGY                 MANUAL
For quality and production Java system (target systems):
- CTC                                              1
- CTS_SYSTEM_TYPE                          JAVA (others for a MDM system)
- NON_ABAP_SYSTEM                         1
- COMMUNICATION_SYSTEM:                 (SAPSID of the ABAP communication system (e.g. the domain controller))
- DEPLOY_WEB_SERVICE                       CTSDEPLOY
- DEPLOY_DATA_SHARE:
When this is done correctly, you will see the fields ABAP communication system and client populated in SMSY.
When ChaRM needs to operate on the non ABAP systems, it will take the RFCs for the communication system and client.
Best regards,
Miguel Ariñ

Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA

Hi,
I am facing a big problem...I have created WebDynpro Application & when I am running that application from WebDynpro, it's showing the page but giving me the error message as:-
Could not create JCOClientConnection for logical System: MUSA_MODEL_DATA - Model: class com.bcone.bcool.musa.model.MUSABAPI. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
What do I do? what connections I have to check?
pls help.

Hey if you are connecting to SAP system making use of adaptive RFC model you hav to create logical systems(JCOs).So while creating the model you have to specify 2 logical system names(one for model data or on for the meta data).If you have not created the JCOs or if the JCOs are not active then you are going to get this type of error.To activate those JCOs ask your administrator to activate the JCO for metadata of your application.If you are having proper credentials then log on to portal
System administration>webdynpro>expand the local directory>select your project>click on maintain JCOs and activate the JCO for the metadata.
Or else change the logical system in your application.

Could not create JCOClientConnection for logical System: SAP_R3_HumanResour

Hi,
For all the standard ESS (sap.com) the JCo connection used is SAP_R3_HumanResources .
All the applications are working fine.
I am trying to add a test Component in one of the (sap.com~eepro) for testing a standard BAPI call for getting user details.
I have used the same Model and the same SAP_R3_HumanResources destination name.
But i get the following error when i try to execute the standard BAPI_USER_GETDetails (non - HR).The other applications for standard components (Vc ) work when i run the application.
My question here is why a custom , local webdynpro when try to make a RFC call using the running already existing JCO connection throws such error.
How could this be solved.Note the connection is running and working fine for all the ESS webdynpros!!
Error:
Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.test.hr.model.Test. Please assure that you have configured the RFC connections and/or logical system name properly for this model!
Your experience would be worthy enough.
Regards,
Swathi

Hi Swathi,
Here are some suggestions to trace down to the actual problem.
1) First check if all users are having this issue. (All other applications working and only one application giving problem)
2) If no, then take list of users having this problem and check their portal and SAP accounts
3) If yes, then concentrate on testing the JCo connections and the user account mapped in JCo settings
Possible things u can check is user's portal account (locked or not), SAP account (lock or validity), pernr mapped (validity), JCo user (check for lock), ping and test JCo connections
If none of them are issue, check the logs if there are any trace for this issue. I believe there must be certainly one. That can help u going further.
Regards,
Harini S

Create entry for remote system necessary?

Hello,
is it necessary to start in CEN transaction RZ21 u2192 Technical infrastructure u2192 Configure Central System u2192 Create entry for remote system.
What is the result of this transaction and why is a <sid>adm user needed?
Thanks

Hello,
I take you mean you have a JMS queue created in an Oracle database (A) and you want to propagate messages to a JMS queue create in an Oracle database (B)?
If that is the case you use normal AQ propagation. You can follow <Note:102771.1> as an example changing the ADT as appropriate, etc.
MGW is only to be used for Oracle to 3rd-party propagation.
Thanks
Peter

Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST

Hi ,
I am getting the below error:
Could not create JCOClientConnection for logical System: WD_MODELDATA_DEST - Model: class com.eligibilitymodel1.EligibilityModel1. The SSO ticket needed for authentication to WD_MODELDATA_DEST has expired. Close all applications and logon anew!
Regards
Anumit

Anumit,
when will you get this error?
if you are getting this while using adaptive rfc model follow this link Could not create JCOClientConnection for logical System:
if it doesnot work
try to reimport the certificate or restart the server
Thanks
Bala Duvvuri

JCO connection error:Couldn't create JCOClientConnection for logical System

Hi All,
We are facing a production outage issue.
We have a Federated Portal Network setup where one of our producer goes down automatically (seems on heavy load).
On this Producer server we have 3 Web Dynpro applications deployed and default trace is full with JCO connection error   saying Could   not create JCOClientConnection for logical System: CSVMR_WD_MODELDATA_DEST.
We had issue with max allowed JCO connections so we changed the below mentioned parameters for JCO connection settings in portal:
u2022     Minimum value of JCo Pool Size in total = 80
u2022     Minimum value for CPIC_MAX_CONV per SAP Web AS = 320
u2022     Maximum Number JCo Connections = 160
Please let us know if we are missing on some settings, any help in this regard is appreciated.
Regards,
Priyanka

Hi,
As you have already increased the maximum number of connections/pool size but still you are facing this problem. I would suggest you to check the web dynpro application which might not be able to release/disconnect the JCO connection.
Please check this [Thread|How to close a model object connection for Adaptive RFC?; for more details.
Regards
Puneet

Understanding and using Logical Components for Managed System configuration

Experts.....
I am embarking on a fresh installation of SolMan 7 EhP1 SPS25 and after a few bugs along the way, I am finally nearing the end of including the first Managed System. Somewhat related to {forum:id=10293771] I am hoping I can get some advice, but specifically with regards to Logical Components.
General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
I am at the last step of the managed systems configuration wizard : "create logical components" and only want to ensure that I set things up to hopefully ensure that later usages (Maintenance Optimizer, etc) will handle things correctly!!!
- Our SAP landscape is not very complex
1. only ERP and EP (Dev/Test/Prod).
2. We are utilizing HR Self Service (XSS).
3. The ERP ABAP systems are on Netweaver 7.01.
4. EhP4 has been installed, however we only activated the HCM business functions. Therefore SAP_HR is on 604 whereas SAP_APPL is on 600. I think this might be driving some of the confusion in SMSY
For the DEV ABAP system I am trying to configure:
1. The system is showing up in two products : "SAP ERP" and "SAP ERP Enhancement Package" with the header data for both showing "EHP4 FOR SAP ERP 6.0 / NW7.01" and "SAP ERP 6.0"
2. Under "SAP ERP" the "product instance selection" shows only "SAP NW - Adobe Docu. Service" and "SAP ECC Server" as relevant
3. Under ""SAP ERP Enhancement Package" the "product instance selection" shows only "Human Capital Mgmt" as relevant by default. I manually flagged the development portal system as "relevant" for "SAP XSS (Self Services)"
4. The RCA DBA Cockpit system is complaining "No data available for extractor activation. Please check product mapping and Software Components in SMSY"
5. In the Managed System wizard, there is no logical component for any of the "EHP4 FOR SAP ERP 6.0 / NW7.01" selections
From what I can tell, I think this is correct:
1. Create a Z_EHP4 logical component and assign the DEV/QAS/PRD systems to them
2. Also assign the DEV/QAS/PRD to the existing SAP logical component "SAP ERP ECC SERVER"???
3. For the Solutions, my plan is to create
a. Non-Production ERP : with the dev/test erp/ep systems, but test system as the leading system
b. Production ERP with the prod erp/ep systems only
Thanks for any advice/guidance to help me avoid future problems!!
Edited by: Eric Poellinger on Jun 15, 2011 6:32 PM

General question - I have a slide from SAP that shows a picture from Product->System->Instance->Logical System (client)->Logical Component. I am confused because it shows that Client 100 of a given ABAP system could be assigned to Logical Component A, whereas Client 200 of the same system could be assigned to Logical Component B. This seems wrong to me?
Client 100 could be assigned to any number of logical components, client 200 could be assigned to those same ones or none of them. A logical component is just a grouping of systems used to accomplish some task in SolMan.
For example with ChaRM you could have 2 logical components.
ZCHARM_DEV development (100) -> QA (200) -> prod (300)
ZCHARM_SEC security (900) -> QA (200) -> prod(300)
One is used to show the path for moving development changes to prod, the other for security changes. 200 belongs to both, but 100 only to one.
Set them up in whatever way meets you needs. It looks like for you, you could just use the default one and assign your clients to the various system roles. Not all functionality in SolMan uses the logical components though.

"Could not create JCOClientConnection for logical System" error

I get this error each day around 3 PM, like the JCO connections where never released...
What should be the JCO settings for this simple app, can someone help me understanding the way to configure JCO connections (or a pool) properly?
- 1 application (expirationTime 1 hour, logon using SSO ticket);
- Uses 4 RFC models : A (calls one R/O RFC function), B (calls one R/O RFC function), C (calls one R/O RFC function) & D (calls one R/O RFC function and one update RFC function);
- all the 4 models uses the same JCO destinations : WD_MODELDATA_R3_STANDARD and WD_RFC_METADATA_R3_STANDARD;
- users : 10 (who could possibly work in up to 4 windows);
Note that I've added these lines in the CC of the models, good idea or not?
- CC of Model B (before the RFC call) : reuse of the the ModelA connection using "Model1.setConnectionProvider(Model2)" command.
- CC of Model C (before the RFC call) : reuse of the the ModelA connection using "Model1.setConnectionProvider(Model2)" command.
- CC of Model D (after the RFC call of the update function) : "model.disconnectIfAlive();" command.
Thanks for your help!

Seems that the « Reuse connection » command is essential to assure that an application use ONLY ONE Jco. I get rid of the disconnectIfAlive.
Recommendation 1: Put all the BAPIs that you call in the same system into the same model!
Recommendation 2: If you canu2018t follow recommendation 1, make sure that the two models synchronize their (JCo) connections!
// two separate model instances are created ...
MyFirstModelTypemodelMyFirst= (MyFirstModelType) WDModelFactory.getModelInstance(
MyFirstModelType.class,
WDModelScopeType.APPLICATION_SCOPE);
MyOtherModelTypemodelMyOther= (MyOtherModelType) WDModelFactory.getModelInstance(
MyOtherModelType.class,
WDModelScopeType.APPLICATION_SCOPE);
// ... but the first model manages and provides the
// connection for the other model
modelMyOther.setConnectionProvider(modelMyFirst);
Edited by: Emanuel Champagne on Jun 27, 2008 2:38 PM

Create solution for each system Landscape?

Hi,
We are using Solution Manager 4.0.
We have created one solution and all of our ECC 6.0 systems with in ECC landscape have been already integrated with that existing 'Solution'..
Now, we are implementing BI 7.0 system.Since this is seperate landscape
would it be better if i created another solution and integrate all BI systems with
that?
I thought of taking your opinion before i implement that.
Thanks,
Ram

If you group them by system type, how do you classify the Leading Role of your Solution?
You have to assign, Dev, Test, Prd, etc to the leading role of your solution, other systems in the logical component that do not have the same classification that the solution is assigned wont show up.
edit -
Once you have an active solution you can edit your solution settings and add other systems to your solution even if the leading role of your solution differs from one of the systems of your logical component. You can simply add a system by adding the logical component that it is defined in, then right click on the system and click "add to solution".
Edited by: David Labuda

Could not create JCOClientConnection for logical Systems

Louis,
is there any jco connection with this name Z_GZD_YYGS_MODEL_DEST
Thanks
Bala Duvvuri

Hi,
Make sure that you have mentioned the New JCo destinations name in new WD Project JCo references
Tab.
And you are able to ping And Test the New JCo Dest in Webdynpro Content Admin
Siddharth

Create Multiple tasks for Single Item in List using state machine workflow in sharepoint

Hi,
I want to create multiple create tasks for Single Item in List based on Assigned to column using state machine Workflow through visual studio
Here Assigned to column allows multiple users. so i have to create task for every user based on column .
I'm trying for this but i didn't got any solution
Please provide solution for this.

Hi,
According to your post, my understanding is that you wanted to allow multiple users to approve.
There are some articles about creating parallel tasks in state machine workflow, you can have a look at them.
http://www.codeproject.com/Articles/477849/Create-Parallel-Task-in-State-Machine-Workflow-in
http://msdn.microsoft.com/en-us/library/office/hh128697(v=office.14).aspx
http://social.technet.microsoft.com/Forums/office/en-US/b16ee858-4360-479a-a686-4ee35b7be9db/sharepoint-2010-workflow-creating-multiple-tasks?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

System configuration issue

Hi,
I have one issue while using the system configurations .
I have created the two data store configurations with two different databases .
I have created two system configurations for two database configurations .
But while running the job it loading data from default data store configuration only for both system configurations .
It is not loading data from other data store configuration .
What will be the issue?
Thanks & Regards,
Ramana.

Are you sure you have associated your datastore configurations with your system configurations? If in doubt, please post a screenshot.

Creation of Ibase for satellite systems in Solution Manager 4.0 SP13

Hello!
Can enybody help?
We are trying to creat Ibase for Satellite systems in solution landscape in SolMan system, using the automatic generation(TA SOLUTION_MANAGER) for specific solution.
After successfully generation we have only one iBase for one solman system only, but there are some systems in solution.
Does anyone know how to generate iBase for all systems in solution?

Hi,
There will be only one iBase for a solution.
Goto tcode IB52 and check. You will find all the systems assigned to your solution appear there.
regards,
Ram

Creating cofiles for single system configuration

Similar Messages

Maybe you are looking for