Creating Collective PO from STO

Hi,
I tried to create collective PO from my STOs but it says no document selected.
I already assign distribution profile to my DC and already assign distribution profile for my article and DC in which I already checked the collective PO check box.
Please help.
Regards,
Dwi

Hi
We can not create a PO from and info record, we can only refer the info recodrd for the price and conditions during PO creation for the vendor/material/pur orgn. concerned . A PO can be created by referring a PR / RFQ / Contract only.
Regards
Edited by: samuel mendis on Jan 25, 2010 11:58 AM

Similar Messages

Create Outbound Delivery from STO/PO

Hi,
I need to create a Outbound Delivery with respect to STO. Did anybody worked on this, Please pass which FM/BAPI used?
Thanks in advance,

try BAPI_OUTB_DELIVERY_CREATE_STO.
anya

Default sloc determination in OBD which is created from STO

Hi,
In case of STO, if supplying plant has 2 sloc lets say 001 and 002. If we want picking should happen from 001 or sometime 002 then how we can make this sloc defaulted in OBD? Please note u2013 we are creating the OBD from STO
In short my question is, How to make desired sloc defaulted in OBD which is created from stock transport order?
Thanks,
Milind

Hi,
In SPRO>LE> Shipping>Picking>Determine Picking location>Assign Picking Locations> , you maintain the proper entries.
Enter the storage location that you want to be defaulted in OBD against Shipping Point/Shipping Conditions combination.
Wehn you create STO PO, you can change the proposed shipping conditions or shipping points. You can aslo do it in ME22n befor generating delivery in VL10B.
In PO's Shipping Tab, Shipping condition arrives from customer master.
Loading grroup arrives from Material master : sales view 2.
Shiping point will be determined from the config done in LE> Shipping>Basic Shipping Functions---> Assign shipping Points.(entered against SC/Lgrp/Plant Combination).
Later, you enter picking storage location(To be defaulted in OBD) in above given path for the correct combination of Shpt/Plnt/SC.
If you maintain settings properly in above 2 SPRO path and Loading group in Material master (SD veiw) and Shipping conditions in customer master properly, this results in proper determination of shipping point in shipping tab of ME21N and hence the OBD will be created with Default Storage location as you desired
Regards,
Shetty

Creating collective deliveries with VL10A

Hi All,
While creating collective deliveries from sales orders using VL10A, i am checking a condition which if fails should not allow to create the delivery and also should log the errors in V_SA.
I am using the subroutine MESSAGE_HANDLING to log the errors. But here is strange scenario, if i create the delivery with VL01n then the error message is issued and delivery stops but if i create the delivery using VL10a then the error log is created but still the delivery is getting created. Now, my requirement is that in VL10a such delivery should not be created at all and VL10a should continue with creating other deliveries in the backlog.
P.S - I am using the exit MV50AFZ1 and the user exit is 'save_document_prepare'
Regards,
N. Reddy
Message was edited by:
nageswara reddy bireddy

Hi Tamas,
I already tried this using MESSAGE E statement. If i use this the system jumps to form SHP_VL10_DELIVERY_CREATE. and here it issues an abend message.
The problem with this abend message is that if i use the background process to create the set of deliveries the abend message terminates the process and all the pending deliveries are not created.
Is there any way by which i can skip the creation of this particular delivery and continue with creating other deliveries in VL10a.
Regards,
Nageswara

What are customizing steps to create pro forma invoice from STO delivery?

I have copied FUPI output for pro forma invoice billing type F8. I tested and was able to successfully get it to work for a regular delivery that was created from a standard sales order. However, I need this to also work for a stock transport order created delivery but I keep getting the error that the item is not relevant for billing. I have searched the web for 2 days and did find one posting that was exactly the same issue that I have and the person asking the question said they solved the problem but did not provide the answer as to how.
I tried changing the item category NLN billing relevance to D from a J and that did not work either. I need the pricing to print on the pro forma invoice also. On a standard sales order created delivery it works like a charm.
this is what I hope to accomplish - create sto - create delivery from sto - create pro forma invoice for customs
Any help would be greatly appreciated.
thanks in advance
Donna

Hi
In VOV7 the billing relevance for item category NLN should be maintained as A (delivery related billing)
Then you need to maintain copy controls in VTFL between NL to F8
In copy controls at header level copying requirements should be 009
At item level for item category NLN copying requirements should be 010
Pricing is picked from the OVKK settings that is for your sales area, CPP as the receiving plant is the customer, and DPP from the billing type of F8 For this combination you need to maintain Pricing Procedure
In VTFL At item level for item category NLN the pricing type should be B
If you need to maintain this settings you can create F8 proforrma invoice in intra comapny STO
Regards
Raja

Create STO Invoices Flow from STO PO

Hi,
I need to create STO invoice but I m stuck in the Shipping Doc Flow.
Here are the steps that I had completed.
1) Create STO PO.
    - Purchase Doc Type: ZB
    - T-COde: ME21N
2) Create Outbound Delivery for STO PO
   - T-Code: VL10B
3) Create Shipment with reference to the delivery
   - T-code: VT01N
   - I executed the Planning, shipment start, shipment & Shipment Completion in Deadline Tab.
   4) Create Shipping Cost Doc
   - T-code: VI01
I put in the Shipping Number and execute.
Why the NET Value becomes 0. And because of this, I cant transfer the shipping cost calculation.
appreciate helps.
Thanks.

Hi,
When I do a VI02, i tried to save with the Transfer checkbox check, but i got this error.
Shipment costs 0000001081 item 000001 cannot be transferred (value 0)
Appreciate helps.
Thanks.

Cannot create collective PO for pull scenario

Hello,
We want to realize the basic distribution scenario (R43 in Retail Best Practice) which involves creating initial STOs from DC to stores and further creating collective PO. It looks like all basic setup has been done. Nevertheless the WF10 returns "No documents selected" error. Can anybody help please ?
Best regards,
Oleg

Hi Oleg,
Check the following :
1. Supply source of the store must be "2" ( Internal).
2. Supplying site must be assigned at the site master level, either at the site level or site/merchandise category level.
3. Distribution profile in the respective DC ( based on point 2) must be Flowthrough ( Check config for the profile).
Regards
Prabhu

Is there a way to create a playlist from the now playing screen on ios7?

Is there a way to create a playlist from the now playing screen on ios7? I want to be able to hear a song in my collection and immediately add it to an existing playlist or create a new playlist.
Thank you in advance

Hi Cornellius,
From the now playing screen there's a Create button at the bottom that allows you to create a
Genius Playlist
New Station form Artist
New Station from Song
IPhone Help, Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
The Now Playing screen provides playback controls and shows you what’s playing.
For information on Genius Playlists, see
Archived - Genius for iPod and iPhone
http://support.apple.com/kb/HT2978
I don't see an option to add it to an existing playlist.
Best Regards,
Nubz

How to create printable report from a swing app.

Hi,
I have googled quite a bit and have searched the forum extensively but haven't found answers to my questions.
I have a small swing based application (that uses jtextfields, jbuttons, jlist, etc) that collects information from user
and stores in some variables; which are like strings, integers, hashmap, etc.
Now this information is to be formatted and is to be printed as a report.
Formatted as in, some part of the collected text is to be printed in certain font and other in different color and so on.
Also the report is to be printed on a paper leaving some space at left and at the top. That means margins need to be set.
And before all info is to be sent to printer I need to display this information in some report viewer (preview).
How can I format certain text and set margins? (Is there some Document kind of api which allows me to set margins, change font of certain text?)
How should I display this text / information as a print preview? (Should I use jeditorpane / jtextpane ?)
How should I send all the information to the printer? (What java api should be used for printing?)
The data entered by the user is not saved / persisted to any database. It's to be sent to the printer after submit button is pressed on the swing app.
Since there is no database I couldn't use jasper-reports.
Following are links to all threads (not useful) I found when I searched for swing / print / report in the forum :
http://forums.sun.com/thread.jspa?forumID=331&threadID=225351
http://forums.sun.com/thread.jspa?forumID=57&threadID=576758
http://forums.sun.com/thread.jspa?forumID=57&threadID=570629
http://forums.sun.com/thread.jspa?forumID=1&threadID=489905
http://forums.sun.com/thread.jspa?forumID=57&threadID=571093
http://forums.sun.com/thread.jspa?forumID=257&threadID=138450
http://forums.sun.com/thread.jspa?forumID=57&threadID=583150
http://forums.sun.com/thread.jspa?forumID=57&threadID=5399572
http://forums.sun.com/thread.jspa?forumID=57&threadID=579619
http://forums.sun.com/thread.jspa?forumID=57&threadID=593199
Help would be much appreciated.

alan_mehio wrote:
The simplest thing to do in your case is to load the file content into the JTextArea
then to create the header and the footer if there is any from java.text.MessageFormat
then you invoke the print method on the JTextArea instance object> Just let me know if you are face any furrher problem
Alan Mehio,
I have been able to set margins and get the printout just the way I want it (after some experiments / trial & error).
But the problem is, parameters to paper.setImageableArea() are hard coded as in the example code below :
        System.out.println("print?");
        PrinterJob printJob = PrinterJob.getPrinterJob();
        if (printJob.printDialog()) {
            PageFormat pf = printJob.defaultPage();
            Paper paper = pf.getPaper();
            paper.setSize(8.5 * 72, 11 * 72);
            System.out.println("paper width : " + paper.getWidth());// expecting 612
            System.out.println("paper height : " + paper.getHeight());// expecting 792
            System.out.println("ImageableHeight : " + paper.getImageableHeight());
            System.out.println("imageable width : " + paper.getImageableWidth());
            System.out.println("ImageableX : " + paper.getImageableX());
            System.out.println("Imageable y : " + paper.getImageableY());
            //paper.setImageableArea(108, 144, paper.getWidth() - 108, paper.getHeight() - 144);
            paper.setImageableArea(222, 244, paper.getWidth() - 222, paper.getHeight() - 244);
            pf.setPaper(paper);
            printJob.setPrintable(jTextArea1.getPrintable(null, null), pf);
            try {
                printJob.print();
            } catch (Exception ex) {
                System.out.println("exception while printing...");
                ex.printStackTrace();
        }In my case the left margin should be 1.5 inches (38.1mm) and top margin should be 2 inches (50.8 mm)
Considering 72dpi printer for a A4 size page (8.5in X 11in), the parameters to paper.setImageableArea() should be
(108, 144, paper.getWidth() - 108, paper.getHeight() - 144);
But the printout leaves only 1inch for top and left margins.
Here are o/p lines for method-call with above said params :
paper width : 612.0
paper height : 792.0
ImageableHeight : 648.0
imageable width : 468.0
ImageableX : 72.0
Imageable y : 72.0
When I pass the following values I get text printed with desired margins on the paper but the above printlns remain exactly the same!
paper.setImageableArea(222.4, 244, paper.getWidth() - 222.4, paper.getHeight() - 244);
Although I have been able to achieve what I wanted to without using 3rd party libraries,
I feel this hard coding of values isn't a good idea and leaves a doubt whether this will work on other systems with different printers.
My question is, how to get these numbers correct every time? Is there a formula for obtaining these numbers?
Also formatting of certain part of to-print text is something that is yet to be figured out.
Thanks.

Error on creating a subsite from custom template with full control

I have a site collection and a subsites A and B on it, there is a group 'Managers' that has Read permissions on
site A. This group has Full control permissions on site B, and I have a solution with custom site definition, lists and feature event receiver that breaks permissions for certain list and sets Read permissions for group 'Visitors'. This list
is being created when site was created by my custom site definition. But when I try to create a site from this template I get 'Access denied'. I checked logs, and they say that site was created, every method in my receiver is executed without errors
but later I see messages about deleting this site. But if I am a
site collection admin everything works. And another fact is that if I create site without activating feature with event receiver and after creating site I
manually activate the feature everything works fine. Any ideas?

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Rescope your features so that web application related activity are performed by a web application scoped feature.
2. Disable the security setting via PowerShell or a console app.
function Set-RemoteAdministratorAccessDenied-False()
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Administration") > $null
# get content web service
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
# turn off remote administration security
$contentService.RemoteAdministratorAccessDenied = $false
$contentService.Update()
Set-RemoteAdministratorAccessDenied-False
Best regards
Dennis Guo
TechNet Community Support

Create a schema from web service in eclipse

Hi all,
I'm trying to export some data out of SF to an 3rd party via a web service. In the webUI I have the possibility(Attachment 1) to create a schema from web service so my outgoing file matches the requirements. In Eclipse I cannot find that option and I'm encoutering some errors (attachement 2).
Can anyone tell me if there is a possibility like the web UI in eclipse?
Thanks in advance.

Hi,
You can create a portal service which can access KM to create a folder and then expose this portal service as Web Services.
To know more:
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/cb213e578c0262e10000000a11466f/frameset.htm
https://www.sdn.sap.com/irj/sdn/thread?threadID=324931
To know the api to create folder in your service method, check this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0ab890-0201-0010-849d-98d70bd1d5f0
Some code:
IResourceContext context = new ResourceContext(user);
ICollection parent = (ICollection) ResourceFactory.getInstance()
.getResource(″/documents″, context);
IResource resource = parent.createResource(″file″, null, null);
ICollection collection = parent.createCollection(″folder″, null);
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Error while raising billing from sto

Hi . ,
For my business cycle , Here we are doing STO then delivery then billing .... now customer want during billing they can maintain values manually ... previously it is flowing from sto only ( condition type P101 ) , now as per their requirement I remove that one ...and in that place i put one manual condition type which will work through per kg (weight basis) .
But now whenever i am creating invoice in header i am giving value per kg . ... but it' sshowing some error of " material , condition type and unit of measure EA is not allowed "
Though net weight and gross weight is maintained properly .
Please advice .

Hi ..sankar ,
Unit of measure in material master is EA .
But I maintain manual condition type in net weight basis .
In v/06 , I customize it like bellow way ...
Cond. class     B Prices
Calculat.type    E Net weight
Cond.category G Cost
Rounding rule    Commercial
pls help ...

Unable to Create Entity Model from existing oracle database

Hi,
I am using Visual Studio 2013, .net framework 4.5, entity framework 5.0 and oracle 11g database.
Issue Description: I need to develop WCF service to exposing the account information which needs to get the data from 20 oracle tables. Trying to create entity model from existing oracle database. first i tried creating just two tables it
was created but it took more than 30 minutes. then i selected remaining few tables it took more than a days but nothing created just showing spinning the wheel. then i tried with fresh project and selected all the tables but same issue nothing created and
also there is no error. during this process i checked database query monitoring there is a big sql statement collection tables metadata. i don't know what was wrong the query taking too much time to complete the process.
we tried multiple machine and different oracle database all are same issue.
Sql server database -looks good no issues.
Any help/tips/ideas welcome to overcome this issue.

Hi Sakthimp,
Welcome to MSDN forum.
Your issue is out of support range of VS General Question forum which mainly discusses the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue only occurred with oracle database, moreover Oracle developed the Entity Framework for Oracle itself, I suggest that you can consult your issue on Oracle forum/community:
you will get better solution and support there.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create a pdf from an arabic wiki page

hello there!
I come across a nasty probleme whil trying to create a pdf from a wikipedia page:
I go to File--> Create PDF --> From web page, then I choose an arabic page (example adobe entry from wiki http://ar.wikipedia.org/wiki/%D8%B4%D8%B1%D9%83%D8%A9_%D8%A3%D8%AF%D9%88%D8%A8%D9%8A )
the result is a missed up, ther's no arabic text, only latin text appears!
I have installed arabic/hebrew language support to windows from regional settings.
hebrew displays good but arabic not.
I use Acrobat 9 Pro version 9.1.0 on a Windows XP SP3 English.
from some searches on the net i found that i must buy the adobe CS4 Middel east version, and that will be bad to buy two versions of the same product just for one littel thing such as arabic/hebrew .
is there any solution other than this hard choise?
thank you.

As I said above, non of the adobe cs4 Master Collection supports fully arabic type.
I need to be able to write arabic in Photoshop, indesign, Illustrator, After Effects, Premiere..
I taught CS4 will come out with this option of arabic typing included, but I found that you must by another set of Adobe products arabic enables from the Winsoft company.
a temporary solution is to download the arabic trials found here; http://www.winsoft-international.com/en/downloads/trials/ and use them to make the things that you need in arabic, then delete them and keep using the English CS4.. this is helpful when you have only to work with one project with arabic type, but, this doesn't work, as the trials wil expire and you have to buy licenes again.

Search not working in site collections migrated from MOSS 2007 to SharePoint Server 2013

I have few site collections migrated from MOSS 2007 to SharePoint Server 2013 using database attach (first to 2010 and then to 2013).
When I search for anything in these migrated sites, I get "Nothing here matches your search".
Checked the crawl log for these sites and see this error for all items.
The content processing component failed to process the security descriptor of the item. ( The input ACL is invalid (1210 / 2072).; ; SearchID =
Some-Random-GUID )
Search works fine in newly created sites in 2013 environment.
Please help.

Hello
Did you migrate your users to claims when you migrated the databases?
$wa = Get-SPWebApplication http://yourdom.com
$wa.MigrateUsers($true)
$wa.ProvisionGlobally()
I assume the sites that work and the migrated content are in the same database?
MCITP-EA | "Never test how deep the water is with both feet"

Creating Collective PO from STO

Similar Messages

Maybe you are looking for