Creating color-based links in Flash

I have an image with seven distinct colors. I would like for each color to be linked to a separate html page if clicked. Can flash link to a page based on the color of the area clicked? If so, how? If not, any ideas on a workaround?
Thanks!

I extracted each color into a separate layer, but converting the layer into a button converts the whole rectangle area. The image is a subway map, so each layer is a box that contains that colored line. Is there a way to shrink the layer to only contain the line itself?
Thanks!

Similar Messages

Link Custom Flash Buttons in Dreamweaver?

Hello,
I created an animated button in flash and tried to link it up
in Dreamweaver with no success. I don’t understand why I can
use generic animated buttons that DW offers and have a link for
them but, when I create my own DW doesn’t offer a link. All
I’m trying to do is link to a different page on my site. I
tried to use “getURL” in the action script in flash and
got that to work but, I really didn’t want to open a new
browser. Can anyone help?
60vette

If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
In addition, you cannot add a link to a Flash element using
HTML. That link
must be added in the Flash itself.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"60vete" <[email protected]> wrote in
message
news:fcpoqm$rou$[email protected]..
> Hello,
> I created an animated button in flash and tried to link
it up in
> Dreamweaver
> with no success. I don?t understand why I can use
generic animated buttons
> that
> DW offers and have a link for them but, when I create my
own DW doesn?t
> offer a
> link. All I?m trying to do is link to a different page
on my site. I tried
> to
> use ?getURL? in the action script in flash and got that
to work but, I
> really
> didn?t want to open a new browser. Can anyone help?
> 60vette
>
>

Url link in flash page flip book

I am very inexperienced at what I am trying to accomplish.
I have created a flip book in flash. On a page in the book I made a button that is a link to an external url. When I place the the swift file of that page on my webstie, the link works. I have made a link from my homepage to the flipbook. But when I open the flip book the url link does not work.
Does anyone out there know what's wrong?
thanks

If the flip page the swf is in has interactive code asigned to it, such as whatever you use to flip the page, it could be blocking access to any clickable objects in the swf file.

Can I Create A Symbolic Link to folders stored on an SMB Share folder?

Hello,
I am very new to Unix and was hoping that someone could point me in the right direction with regards to Symbolic links and an SMB share folder ....
Have purchased an ext. LAN Drive enclosure (http://www.macpower.com.tw/products/hdd3/pleiades/pd_usblan) which connects to my wireless router via ethernet like my G5 (main Mac) - our iBook connects via Airport. I have copied all my general documents/files to the SMB share folder on the ext. drive so that I can access them from the G5 and also the iBook.
However I'd also like to be able to store my actual Mail folder (/Users/Mark/Library/Mail/), , Safari folder (/Users/Mark/Library/Safari) + my Address Book and other folders sitting in the Application Support folder on my SMB share so all important docs/folders are in the one place. I've tried storing these folders on the SMB share and putting an Alias to these back in Users/Mark/Library/Mail etc but of course an Alias doesn't work.
Question 1: Can I create a symbolic link to these files if these are stored on an SMB share folder? If so, could you please tell me exactly what I'd need to type into Terminal? My SMB Share path is smb://STORAGE-XXXX/MARK
I have copied my iPhoto library and iTunes library to the SMB share and are working fine.
Question 2: Is it possible/worth attempting to move my whole home folder to the SMB share folder? Ideally, I'd like to be able to access my Mail from the iBook as well. If I could log into either the G5 or the iBook and access my latest Mail, Address Book and other Application Settings, that would be perfect. Would this be possible?
Thanks
Mark.
Dual 1.8GHz G5 (Rev.B), 2Gig RAM, 9600XT Mac OS X (10.4)

Dear Mark,
Yes you can. The command to create a link will look something like this:
$ ln -s thisFolder /Users/mark/thatFolder
I did this while I was hosting a microsoft based game. This put all of the players into a common directory.
SMB just resolved the link and everything worked fine.
However, as I understand it, some other applications do NOT work very well with links. As I have NOT tried it with other applications, I fear I can be of NO help to you in this matter.
The only way to find out which applications work with links is to try them and see what happens.
Best of luck,
Kurt

How do I create a downloadable link from an Interactive PDF file created out of InDesign CS6?

Hello,
I created an Interactive PDF file out of InDesign and would like to make the large file a downloadable link and share it with the user in an email. I do not want to use DropBox or GoogleDrive.
The company I contract for has their own site - do I insert the file into the site or can I create a separate link for it?
I will be recreating these presentation PDF's constantly, so I would like to know if there is a simple way to create this link for files in the size of 7-12MB.
Any ideas on downloadable links? I do have flash - but rarely use, perhaps load the file out of flash?
Thank you so much for your help,
Megan

Hi Willie,
Thanks for your help. Most likely contact the company who maintains the
site then to share the file with them I'm assuming?

How to create event based process chains

Hi All,
I would like to know about event based process chains. In connection to this, could you please answer the following queries,
1. How to create events
2. How to link created event to the process chain in the same BI or BW system and as well as from
    externel BI system.
3. How link one process chain with other process chain (i.e, After completion of one process chain, it
    should trigger other dependent process chain)
Thanks and Regards,
Kotesh.

1). Doubt regarding first question.
For example, i would like to create time based event (it should be trigger daily at specified time),
where we have to maintain scheduling options while creating event.
When i checked SM62 there i found only two options a). Event name and b). Description.
Could please send any doucument link if you have.
Ans : You can use function modules like "BP_EVENT_RAISE" in a program and schedule the program to trigger.
2). For externel BIW system also same procedure we need to follow or any difference.
Ans : Externally you need to trigger the same event.
3). i found dependent process chain also had scheduling options as direct scheduling insted of start using meta chain or API. As you said dependent process chain should be mata chain. it seems dependent process chain may be Meta chain or Direct scheduilg.
Ans : Its your choice how you want to schedule it.You can either make that dependent chain a metachain or schedule it separately.
I found at the end of first process chain they kept one process like Raise event and second process chain connected with the help of raise event process event name. If you have any idea about this process could explain a bit more.
Ans : May be they are raising the event in the main chain and triggering the dependent chain using this event.
But Metachain is preferred for such thing.Though it does similar thing.
Hope this helps.

How to create a contact-formular in flash builder 4?

Hello!
Is there any way to create a contact-formular in flash builder 4?
Only three text-boxes (name, email, message) and the "send" button!
I build my page in flash catalyst and export it as an fxp file to flash builder!
What comes next? Please help me!
Greetings

You understood correctly:
- I removed all Build Path > Source Paths
- I moved those paths over to Library Paths > Source attachment
I took inspiration by how the Flex SDK is added to the project. Flex and flex related frameworks (e.g. datavisualization lib) also specify a Source Attachment under Lib Path. If I remove the source attachment I am not able to drill down into Flex code when I want to by Command-clicking on a class name (or hitting F3).
All my SWC are open source. BTW some of the source paths I was using were the path to the Flex code and to datavisualtization lib, which I think are the biggest library I am linking against. So maybe to recreate, just add those 2 libraries and make sure to add the source path AND source attachment.
I am using RSLs for every library if that matters.
I don't understand why specifying a Source Attachment would cause any issues... the swc is in sync with the source specified in its source attachment.

Creating a new "Link to a Document" opens Word document or upload document dialog - plus more!

The Link to Document content type seems to be corrupted at root. When I attempt to create a new Link, either Word opens with a blank document or the "Upload" document dialog opens. It's been changing as I investigate.
One things I've noticed is that the "Link to a Document" Content Type on the parent site collection now shows it's parent as Document. this explains why the Word document opens, but not why the Upload dialog does.
While writing this question, I decided to check further and it seems that the other document types, Audio, Video etc. all now have Document as the parent and are opening a blank Word document.
Has anyone seen this behavior? How do I fix this?
This is on SharePoint 2010.
Thanks in advance.
Barry Cohen
Barry Cohen

Well, I spoke too soon. The process worked for all the custom content types, but the default Document type was still messed up. I probably should have fixed that one first, but...
Anyhow, the Document type had no template going to the Upload File dialog rather than the blank Word document it's supposed to go to. I followed the same procedure I'd followed for the other content types, checking what worked on another site and using that
template which in this case was a blank field:
So, I went opened Document, Document Content Type and went to advanced settings. The template field was empty, which matched the working site, so thinking that if I saved, it would match up with the working site. I saved the Document content type and when
after several minutes the save failed with an incredibly long list of locations where that were being perceived as "read only" plus several hidden content types that were listed as sealed. This snapshot shows a few of they many pages of content types. (I poorly
struck through confidential info):
Besides this gigantic error, which would require going to hundreds of locations on the site to change read access settings, which are, as far as I can tell actually not "read only" or are inaccessible, such as the hidden "System Page Layout' and so forth
which shouldn't be based upon the default document type anyway and therefor not fixable, I need to understand why this is happening and what to do about it. I don't want to spend the next two days going over all of these libaries and content types and ending
up back where I started with all the content types still screwed up. Afterall, I've spent about a day creating all these custom Content Types only to have the default Document content type loose its settings and corrupting everything and another day fixing
it and having it happen again.
This is a highly unacceptable behavior on the part of SharePoint and I would really like to fix this.
Help is sorely needed.
Thanks in advance
Barry Cohen

ADF Table cell color based on the value in that field

Dear All,
I want to create a table for our new application which contains a table used to represent the data in a chart format or matrix format,
and each cell of the table should be filled with a colour out of three colors, based on the value belongs to which range eg:(1-8 ->green, 9-20 - yellow etc),
I dont know how to implement this. Please help...
Ranjith

Check this out.
How to highlight ADF table row based on column value?
-Arun

Email link in Flash CS5 and how to bold typeface...

Hi, total flash newbie here with a few questions:
1.) I'm trying to put an email hyperlink in part of my text, but I can't seem to figure out how to do it. I tried the code snippets, click to go to web page but instead of an URL I typed "mailto:[email protected]" but when I tested it, nothing happened.
2.) How do I link to the other pages from within the website that I'm working on? Again, I'm a total newbie and I'm only familar with Dreamweaver.
3.) Lastly, how do I bold the typeface??? The text tool properties do not show any bold, italic, or underline icons, and the hotkey to bold is the break apart command.
4.) When I test my movie, how come I can't scroll down and see the footer area of the SWF??
If there's someone on these forums that could help me with these problems, it would be greatly appreciated.
Thanks!

TO create a hypper link for a text u can assign text as html text to the text field
tf.htmlText="<a href=\"http://www.adobe.com\">adobe</a>";
this code assigns the opens up adobe.com on clicking on text 'adobe' which in assigned to tf
TO create a bold interface click on the test fiels in the properties panel u will see 'B" button clickinng on which the txt is bold
IN AS u can set bold as below
import flash.text.TextFormat;
import flash.text.TextField;
var tf = new TextField();
var tff:TextFormat = new TextFormat();
tff.size=30;
tff.bold = true;
tf.defaultTextFormat=tff;
tf.htmlText="<a href=\"http://www.adobe.com\">ADOBE</a>";
addChild(tf);
for mail:
<a href=\"mailto:[email protected]?subject=Feedback\">click here </a>
if set as button
on (release) {
getURL("mailto:[email protected]?subject=Feedback");

Color management issues with Flash CS3, please help?

Hello everyone.
I am having issues with color from a Jpeg image produced in Photoshop CS4
after importing onto the stage in Flash CS3. The color in Flash changes the image to a lighter less saturated state. Yuk.
Here is a link to a screen capture to show you what's happening (for a bigger view):
http://www.rudytorres.com/color/weirdcolor.png
As you can see the front image is the Photoshop image showing the sRGB color profile embedded but Flash (behind) changes that color.
This client is quite picky and she will notice this difference.
If any one can help, please.
- Rudy
P.S. It's a button somewhere, Right?

Dougfly,
Only an hour wasted? Lucky you. Color is an incredibly complex subject. First, forget matching anything to the small LCD on the back of your camera. That's there as a basic guide and is affected by the internal jpg algorithm of your camera.
2nd, you're not really takeing a color photo with your digital camera, but three separate B&W images in a mosaic pattern, exposed thru separate red, green and blue filters. Actual color doesn't happen until that matrix is demosaiced in either your raw converter, or the in-camera processor (which relies heavily on camera settings, saturation, contrast, mode, etc.)
Having said the above, you can still get very good, predictable results in your workflow. I have a few color management articles on my website that you might find very helpful. Check out the Introduction to Color Management and Monitor and Printer Profiling. In my opinion, a monitor calibration device is the minimum entry fee if you want decent color.
http://www.dinagraphics.com/color_management.php
Lou

Only 1 spot color of Linked 2-channel Photoshop image appears in acrobat 9.0

I just installed CS 4 design premium. I have a 2-color business package that was created in Illustrator CS2 with 2-color Photoshop links (spot color multichannel files saved as Photoshop DCS 2.0/eps).
When working before in CS 2 my spot color links viewed just fine when I saved the Illustrator files as pdfs (smallest file size default). Now, working in CS 4 with Acrobat Pro 9, type & vector objects show fine in both colors, but the linked files only view with one of the spot colors. If I open output preview in Acrobat 9 the missing black channel shows up.
All I want to do is send my client a final proof. How can get it to appear accurately on my pdf?

Output Preview invokes Overprint Preview. Since the file displays as expected with Output Preview open, the Overprint Preview may be necessary to view the file properly.
In Acrobat 9, the default for Overprint Preview is "Only for PDF/X". Overprint Preview was removed from the Menu list, but you can change it's default in Preferences:Page Display. I'd recommend using "Automatic" which looks at the file and determines if there is anything in the file that requires overprint preview to display. You can temporarily turn off "simulate overprinting" while the Output Preview dialog is open. You can also select "Color Warnings" and turn on Show Overprinting, the content should be painted with a highlight.
Does this work?
If you are sending a PDF to your client to view, they will need to look at the file with Overprint Preview on. They can download Reader 9 which will allow them to turn on Overprint Preview. Reader's default is also PDF/X compliant files, but this can be changed in the same Preferences area.

Linking between Flash, pdf and html

How to link from Flash to certain page in pdf document
displaying in web browser?
this is not working:
on (release) {
getURL("interfaces.pdf#example", "_self");
neither: #nameddest=example, #page=2
This works though from html, but only first time. If you surf
beck and then go to the same link it doesnt navigate to that page!
Any idea very appreciated!
Thanx

Hi Raymond,
To respond to your question:
Would I have to create two regions with each region the same chart one in Flash and one in HTML and Hide/Show the region depending on the platform I am running eg iPAD or Desktop?
No, this isn't necessary at all. One chart region with a "Chart Rendering" setting of "Flash Chart" on the Chart Attributes page will do the trick. With APEX 4.2, we introduced HTML5 chart support using AnyChart, our existing supplier of Flash charts in APEX. One of the great features of their new HTML5 charting support is how they handle the rendering of a chart. If you take a look at AnyChart's documentation on the rendering options available as part of their HTML5 support, http://www.anychart.com/products/anychart/docs/users-guide/migration-guide.html#from-5.1.x-to-6.x-rendering-types, there are 4 possible rendering options available. We declaratively support two of those options in APEX:
AnyChart Rendering Option       Associated APEX "Chart Rendering" setting
FLASH_PREFERRED                 Flash Chart
SVG_ONLY                        HTML5 ChartSo if you choose to generate a "Flash Chart" in APEX 4.2, AnyChart will handle the rendering of that chart for you, depending upon whether Flash is found on the device or not. Where Flash is detected, a Flash chart is rendered, however if Flash isn't detected (e.g. on devices such as an iPad), then a HTML5 chart will be rendered. So there's nothing additional for you to do - no need for two regions on your page with two different charts. If you choose to generate a "HTML5 Chart", then a HTML5 chart will always be rendered - this is no fallback to Flash with this option.
I hope this helps to clarify things for you.
Regards,
Hilary

Create Fieldcatalog based on internal table (dynamic)

Hi ,
Is there a way to create Create Fieldcatalog based on internal table (dynamic).
while creating fieldcat we usually many give the fields "fieldname" and "tabname".
is there a way to get the fieldname from the main table ?
Eg ..
I have i_tab as the output table. It has 3 fields "a", "b" and "c"
Now when i created fieldcat manually ( in case i cannot use fieldcat_merge FM) , i have to append 3 throws in fieldcat table.
These rows would have "a", "b" and "c".
Now i want to know if there is a way in which i can find "a" "b" and "c" fieldnames from the createdd internal tables.
i can then append the same to fieldcat.

Hi Anuj,
I created a FORM routine for this 4 or 5 years ago and made a couple of refinements. Meanwhile it has prooved as very useful.
The disadvantag is that it creates the oldfashioned field catalog for the function calls. But I already used it for OO fieldcatalog of LVC type - there is a function module for this but I do not have the name here.
You need the two forms (second called in first) to build the field catalog from any internal table that can be used for ALV display.
*&      Form ALV_FIELDCAT_FOR_ITAB
*       Feldkatalog from (arbitrary) internal Table (c) Clemens Li
*       * build field catalog from        type description
form alv_fieldcat_for_itab                                  "#EC *
tables   pt_outtab                      type table        "#EC *
changing pt_alv_fieldcat                type slis_t_fieldcat_alv."#EC *
data:
    lv_desc                               type sydes_desc,
    ls_alv_fieldcat                       type slis_fieldcat_alv,
    lv_longfield                          type text80."CRM<=R/3 fname.
field-symbols:
    <typeinfo>                            type sydes_typeinfo,
    <nameinfo>                            type sydes_nameinfo.
describe field pt_outtab into lv_desc.                    "#EC *
loop at lv_desc-types
      assigning <typeinfo>
      where not idx_name is initial
        and table_kind is initial "no entries for deep table like color
        and back                          = 1. "top-level-entries only.
    read table lv_desc-names index <typeinfo>-idx_name
      assigning <nameinfo>.
    check <nameinfo>-name                 <> 'INCLUDE'.
    ls_alv_fieldcat-fieldname             = <nameinfo>-name.
    while not <nameinfo>-continue is initial.
      add 1 to <typeinfo>-idx_name.
      read table lv_desc-names index <typeinfo>-idx_name
        assigning <nameinfo>.
      concatenate
        ls_alv_fieldcat-fieldname
        <nameinfo>-name
        into ls_alv_fieldcat-fieldname.
    endwhile." not <nameinfo>-continue IS INITIAL.
    read table lv_desc-names index <typeinfo>-idx_help_id
      assigning <nameinfo>.
    if sy-subrc                           = 0.
* Caution: Help-ID may be Tablename-Fieldname and thus longer
* than 30 Chars; ls_alv_fieldcat-rollname is 30 Chars only
      ls_alv_fieldcat-rollname            = <nameinfo>-name.
      lv_longfield                        = <nameinfo>-name.
      while not <nameinfo>-continue is initial.
        add 1 to <typeinfo>-idx_help_id.
        read table lv_desc-names index <typeinfo>-idx_help_id
          assigning <nameinfo>.
        concatenate
          lv_longfield
          <nameinfo>-name
          into lv_longfield.
      endwhile." not lv_desc-continue is initial.
* help id may be data element or <table>-<field>
      if lv_longfield ca '-'.
* get data                                type for table field
        perform get_rollname_4_tabfield
          using lv_longfield changing ls_alv_fieldcat.
      endif." lv_longfield ca '-'.
    else.
* No Help-ID: Use Fieldname as text
      ls_alv_fieldcat-seltext_s           =
      ls_alv_fieldcat-seltext_m           =
      ls_alv_fieldcat-seltext_l           =
      ls_alv_fieldcat-reptext_ddic        =
      <nameinfo>-name.
    endif." sy-subrc                      = 0.
* Starting 4.7: get edit mask
    if not <typeinfo>-idx_edit_mask is initial.
      read table lv_desc-names index <typeinfo>-idx_edit_mask
        assigning <nameinfo>.
      ls_alv_fieldcat-edit_mask           = <nameinfo>-name.
      if not <nameinfo>-continue is initial.
        add 1 to <typeinfo>-idx_edit_mask.
        read table lv_desc-names index <typeinfo>-idx_edit_mask
          assigning <nameinfo>.
        concatenate
          ls_alv_fieldcat-edit_mask
          <nameinfo>-name
          into ls_alv_fieldcat-edit_mask.
      endif." not <nameinfo>-continue IS INITIAL.
    endif." not <typeinfo>-IDX_EDIT_MASK is initial.
* assign length, output length and decimals
    ls_alv_fieldcat-intlen                = <typeinfo>-length.
    ls_alv_fieldcat-outputlen             = <typeinfo>-output_length.
    ls_alv_fieldcat-decimals_out          = <typeinfo>-decimals.
    ls_alv_fieldcat-inttype               = <typeinfo>-type.
    append ls_alv_fieldcat to pt_alv_fieldcat.
    clear: "prevent anything 2 B taken for subsequent fields
      ls_alv_fieldcat.
endloop." at lv_desc-types where not IDX_NAME is in initial.
endform.                    " ALV_FIELDCAT_FOR_ITAB
*&      Form get_rollname_4_tabfield
*       Get Data                          type for Table field
form get_rollname_4_tabfield
using    p_fname                        type text80 ""CRM<=R/3 fname
changing p_alv_fieldcat                 type slis_fieldcat_alv.
field-symbols:
    <dfies>                               type dfies.
data:
    lv_tabname                            type tabname,
     lt_dfies                             type table of dfies,
    lv_fieldname                          type fieldname.
split p_fname at '-'
    into lv_tabname lv_fieldname.
clear p_alv_fieldcat-rollname.
call function 'DDIF_FIELDINFO_GET'
    exporting
      tabname                             = lv_tabname
      fieldname                           = lv_fieldname
*   LANGU                                 = SY-LANGU
*   LFIELDNAME                            = ' '
*   ALL_TYPES                             = ' '
* IMPORTING
*   X030L_WA                              =
*   DDOBJTYPE                             =
*   DFIES_WA                              =
*   LINES_DESCR                           =
   tables
     dfies_tab                            = lt_dfies
*   FIXED_VALUES                          =
   exceptions
     not_found                            = 1
     internal_error                       = 2
     others                               = 3
if sy-subrc                             <> 0.
    message id sy-msgid                   type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table   lt_dfies assigning <dfies> index 1.
    p_alv_fieldcat-rollname               = <dfies>-rollname.
* Und wenn keinerlei Twexte gepflegt sind?
    if <dfies>-reptext is initial and
       <dfies>-scrtext_s is initial and
       <dfies>-scrtext_m is initial and
       <dfies>-scrtext_l is initial.
* No Text: Use Fieldname as text
      p_alv_fieldcat-seltext_s            =
      p_alv_fieldcat-seltext_m            =
      p_alv_fieldcat-seltext_l            =
      p_alv_fieldcat-reptext_ddic         =
      p_alv_fieldcat-fieldname.
    endif." <dfies>-reptext IS INITIAL AND
endif.
endform.                    " get_rollname_4_tabfield
Regards,
Clemens

Change Column Header / Column Background color based on a value in a specific row in the same column

SSRS 2012
Dataset (40 columns) including the first 3 rows for Report layout configuration (eg: the <second> row specifies the column background color).
Starting from the 4th row, the dataset contains data to be displayed.
I would like to change the background color of the ColumnHeader/Column based on the value in the same column in the <second> row.
How can I accomplish the this requirement? (this must be applied for all the columns)
Thanks

Hi Fasttrck2,
Per my understanding that you want to specify the background color of all the columns/column header based on the value in one special column of the special row, right?
I have tested on my local environment and you can add expression to condition show the background color in the columns properties or the column header properties.
Details information below for your reference:
Specify the background color in the Column header: you can select the entire column header row and in the properties add expression in the Background color :
If you want to specify the background color for the entire column, you can select the entire column and add the expression, repeat to add background color for other columns.
If you want to specify the background color based on the value in the specific columns and row, you can create an hidden parameter to get the list of values from the specific column, specify the Available values and default values by select "Get
values from a query", finally using the expression as below to get the specific value you want:
Expression(Backgroud Color):
=IIF(Parameters!Para.Value(1)="1221","red","yellow")
If your problem still exists, please try to provide some smaple data of the report and also the snapshot of the report structure to help us more effective to provide an solution.
Any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Creating color-based links in Flash

Similar Messages

Maybe you are looking for