Creating Common Bom for more than two Organizations

Hi All,
I have a requirement of creating a Common BOM (bill of materials and few components to some organizations at a time) for more than one Organization.
How can i do this.
Can any one help me on this.
Thank you,
Amar

Amar,
Create org hierarchy and use hierarchy when running common bill program rather than org by org.
Thanks
Nagamohan

Similar Messages

No home phone service for more than two months

I am sending this note on behalf of my mother. She has been waiting for technical services to her home phone for more than two months. She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail. My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working. It is frustrating to her to pay for a service she's not receiving. This is the worst customer service experience from Verizon.
I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account. Please contact me {edited for privacy}.

Hi lmatthews522,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one?

I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?

If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free!

Costed Multilvel BOM for more than one material

CK86 report shows costed multilvel BOM for one material.Is there any report whereby I can see costed mulitilevel BOM for more than one material
Regards
Paresh

Dear Paresh,
I dont think there is some standard report to meet this requirement,also please check whether this link can help you,
Re: Product cost report
Re: Report for Cost of Multiple products with Multilevel BOM explosion
Regards
Mangalraj.S

How can i use IDSM-2 in inline mode for more than two VLANs?

can i use the IDSM-2 in inline mode to be ips to more than two VLANS
like this or it isn't
intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
intrusion-detection module 5 data port 1 access-vlan 100,200
thank u all for your help

The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
With an inline vlan pair you pair 2 vlans on the same interface.
You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
How to create inline vlan pairs:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

How to close open POs which are open for more than two month

I am new to MM please somebody help me with this
Thank you

there is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you

Can I make a DVD that will go for more than two hours?

Hi,
I'm working in iDVD 08, version 7.0.1, and when I drop in video that lasts over an hour, I get a warning. The original videos are around 100 MB for each hour, and iDVD won't let me add more than two. It's saying my two 100 MB videos will fill the 4.2 GB of space on the DVD.
What can I do to have the videos stay at around 100 MB each, so I can put several of them on one DVD?
Any help is most appreciated.
Russ Conte

Russ,
iDVD isn't really designed to archive old highly compressed movie files.
DV video (for which iDVD was originally designed) runs about 13 GB per hour and iDVD mpg-2 compresses everything to fit a maximum of 120 minutes on a single-layer disc. (Your files are much more highly compressed than DV and perhaps are also smaller in image size.)
If you want to 'cram' a lot more content on a DVD (and don't care about the quality) you might want to look at VisualHub that claims to let you put up to 18 hours of content on a disc.
F Shippey

Creating hash table with more than two columns

Hello,
I tried to search around and can't quite find what I'm trying to do. I know I can make a hash table like:
$Hash = @{"Texas" = "Hot";"Alaska" = "Cold"}
But I would like to add a third column, so for the sake of an example have the third one say travel by air and the other travel by car. What's the syntax so I can add more columns than two? Also, how can I change the column header names?

I think you want something more like this:
New-Object PSObject -property @{
State="Texas"
Temp="Hot"
Travel="Air"
If I set $hash to equal that:
$hash = New-Object PSObject -property @{State="Texas";Temp="Hot";Travel="Air"}
I get this:
Travel Temp State
Air Hot
Texas
If I have a master variable
$hashes = @()
I can set $hash to the new-object of relevant values each pass of a loop:
$hash = New-Object PSObject -property @{State="Alaska";Temp="Cold";Travel="Car"}
And add that to $hashes each time:
$hashes += $hash
and add to the collection:
Travel Temp State
Air Hot
Texas
Car Cold Alaska
As mjolinor suggested, you really need to understand what you want to do. I suspect you are just unfamiliar with the terms, because what you're describing is an array of values, which is better suited to a PSObject rather than to a hash table.
The method for populating a PSObject I describe above is just one variation of one particular method for doing so, there are others that may be more or less suitable for what you want to do.
I hope this post has helped!
Thank you, this is what I was looking for. I've never had to use powershell for this type of task before and did know of this process, and only could find hash tables when I poked around. This will make life much easier!

How to create a template for more than four column conditions?

Hi
I want to create a report template for a tabular form should have more than 4 column template conditions (more than 12 conditions i need) to get the coloring for row based on the conditions.
so, please tel me how to do a template to meet my requirements.
APEX VERSION: 4.2
Database :11gR2.
Cheers
Tulasi.

Tulasi 1243 wrote:
Hi
I want to create a report template for a tabular form should have more than 4 column template conditions (more than 12 conditions i need) to get the coloring for row based on the conditions.
so, please tel me how to do a template to meet my requirements.
VC wrote:I don't think it is possible using the template column conditions...try using some jQuery code that runs on page load.
I am sure this has been discussed here before. Search the forum...good luck.It is possible using a template, and it has been discussed many times...
The trick is to combine classTyler's conditional <tt>class</tt> technique with a custom named column report template.
Determine a class for the row in the query:
select
          empno
        , ename
        , sal
        , case
            when sal < 1000 then 'low'
            when sal between 1000 and 2000 then 'medium'
            when sal > 2000 then 'high'
          end sal_class
from
          empCreate a custom named column report template, referencing the class in the row template:
<tr class="#SAL_CLASS#"><td>#EMPNO#</td><td>#ENAME#</td><td>#SAL#</td></tr>Then create a style sheet to apply the required backgrounds:
tr.low td { background-color: yellow; }
tr.medium td { background-color: white; }
tr.high td { background-color: red; }

How to create Single Queue for more than one interfaces(XI)

Hi Experts,
I want to set up a separate queue for 3 interfaces which all are outbound IDOC to FTP.
Please let me know ' Hhow to create a queue for multiple interfaces with Quality of Service 'EO''.
Thanks,
Srinivas P.

The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

Adobe store has been broken for more than two weeks (trying to download Flash Lite 2.0)

Maybe this is best classified as a 'departmental cross
post',... I have been trying to download a purchase of Flash Lite
2.0 for a Nokia N70 phone for two weeks now, but the online store
is broken.
Unfortunately I've spent over two hours on hold, accross
maybe four phone calls (repeating the problem, explaining that
although the order status says 'shipped', that it is a downloadable
product only), and still don't have the player.
Adobe: if you're listening, please: I need either an
alternate download link or a CD mailed to me for Flash Lite 2.0 for
a Nokia N70. The folks doing phone support ultimately always
suggest 'waiting for the store to be fixed', but I've waited two
weeks- I just want the darned player I paid for so I can complete
my mobile device project!
Thanks in advance,
Greg

Thanks for the reply.
The problem occurs during installation.
At the first stage, short download installs the GetPlus
DLM (Download Manager). I can see it installed in
Settings --> Control Panel --> Add or Remove Programs.
Then it leaves a shortcut with the Adobe icon in my Desktop
reading "Resume Adobe Downloads".
When I press it (shortcut to "C:\Program Files\Internet Explorer\IEXPLORE.EXE" AND ALSO TO "C:\Documents and Settings\All Users\Application Data\NOS\nosget_start_manager_15235.html")
the real download of the files should begin.
It just opens the downloading applet and before downloading anything
I am getting this "Internet Explorer has encountered a problem with the said add-on, and must close... Send notification/Do not send (you know)"

Creating Scatter chart for more than one column

Hi,
I have 2 columns of sorted numbers, when I select one column at a time and create a Scatter type chart, every thing is OK,
But I want a chart with both columns in it, and when I select both columns and select a Scatter chart, Numbers takes the Group1 column as X axis and Group2 column as Y axis and draws me this chart whiich is not what I want!
When I try this type of chart the chart is something like I want, but not with connected lines.
How can I draw a Scatter chart with 2 columns of data in one chart?
Thanks in advance,
Regards,
Hadi

Thanks Jerrold, The problem was the first column, on the left of Group1. that column should not be as header. I created another table like this and the Share X Values command worked like a charm. I really don't know why!?

CAML query for more than two items in a list and bind those result to gridview?

Hi Team,
I am binding sharepoint 2013 list to gridview programatically.
Now i need to search the results. If i gave some key word in text box and click on search.
Then it should display only those values in gridview using caml query.
Below is my form.

Hi,
Here is a blog about the CAML Query with Multiple Conditions for your reference:
http://aasai-sharepoint.blogspot.com/2013/02/caml-query-with-multiple-conditions.html
If you want to filter the list item, here is a web part from codeplex with the source code for your reference:
SharePoint ListView Filter
https://splistviewfilter.codeplex.com/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Creating SQL-Loader script for more than one table at a time

Hi,
I am using OMWB 2.0.2.0.0 with Oracle 8.1.7 and Sybase 11.9.
It looks like I can create SQL-Loader scripts for all the tables
or for one table at a time. If I want to create SQL-Loader
scripts for 5-6 tables, I have to either create script for all
the tables and then delete the unwanted tables or create the
scripts for one table at a time and then merge them.
Is there a simple way to create migration scripts for more than
one but not all tables at a time?
Thanks,
Prashant Rane

No there is no multi-select for creating SQL-Loader scripts.
You can either create them separately or create them all and
then discard the one you do not need.

Creating Common Bom for more than two Organizations

Similar Messages

Maybe you are looking for