Creating CSS text in Fireworks... or should I say not.
I am so frustrated with Fireworks. I have the latest update, and I am still having problems creating text and exporting as html/css. I've tried deleting elements I though might be causing issues, still no go. I get either no css styling, some styling or some variation in between. I've viewed a few tutorials online and it looks like it should be very easy.
I should state that I am importing a PSD & ILLIO file (tried playing around with both, and still nuttin. Do I need to recreate this fully in FW? Hope not. Will that even work?
I'm a college teacher and I hadn't planned on using Fireworks, but after opening the Overview DVD that came with the software it looked like a great solution for us designers that don't know much or anything about CSS/HTML, now I'm not so sure... and I need to have this ready for my class Wed! Thinking of abandoning FW entirely, which would be dissapointing, cause it seems like a great bridge between design and implementation.
Also when trying to export slices as PNG 24 I am still getting matting even though I have a transparent canvas and have deselected matting in the preview window. Seems really buggy.
Any GURUs that could take a look at my file to lend some help?
Help appreciated!
Matt
PNG 24 does not support transparency in Fireworks. For that you need to choose PNG 8 or PNG 32. Note that Fireworks is a bitmap and graphics editor with multi page prototyping capabilities. Use it for creating mockups for clients, and images for for web pages. It's not a WYSIWYG HTML editor. Use Dreamweaver to build the actual web pages.
Similar Messages
-
How to create a text tag that shows up in a file but not on the sceen.
I need some help, I'm a newbie with enough skill to be dangerous. If someone can point me in the right direction has to how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible
in a text editor but not the text file. That would be great. If you wish to show some code examples that's OK, but if not I can stumble through and learn while doing it from your directions on how to get it done.
I will start with an example of what I'm trying to do; using the old desktop pub program Ventura. They had (what I'm calling a tag) tags in from of ASCII text in a file to tell the program what it was and what to do with it, I. E.; "Title@this
is the title text" the next line could be "Body@this is body text". When loaded the "Title@" would not be there on the screen.
I'm trying to create some text that uses a similar concept but not for formatting of text like Ventura.
I want to be able to highlight some text in an editor and then have it place some sort of tag for the highlighted text so that I could use it to do something upon that text and only that text; in concept the text "Bob Brush was a painter." I would
highlight Bob Brush and somehow assign a tag that would be "name" and then highlight "painter" and be tagged with "job".
The text file would then have something in it to distinguish "Bob Brush" and "painter" as what each is name and job. (as a note I'm not trying to make a database or form just using this simplified concept to get my idea across
because I get to wordy).
Thanks in advance BK
blkHi bik,
>> how to use the F keys to apply the tagging mentioned below and the direction of how to do the tagging and make the tag invisible in a text editor but not the text file.
It is unclear to me. Like you mentioned F keys, how does it work for? And Could you show us some code with a simple sample or a capture? It could be better to help us understand more.
In addition, I found a related thread
Tag editing in a WPF TextBox. Not sure if it is useful for you. Thanks.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Creating a text file using pl/sql
how can one create a text file using pl/sql?
Say for example abcd.txt in the d: drive
(d:\abcd.txt)
on a windows nt server<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bhrigu nagal ([email protected]):
thanks for your replies
I had already set the utl_file_dir parameter
I tried the utl package and wrote the following code but got some errors
declare
filehandler UTL_FILE.FILE_TYPE;
begin
filehandler:=UTL_FILE.fopen('d:/intel/','myfile.txt','w');
utl_file.put_line(filehandler,'look masjdfgsd\n');
utl_file.fclose(filehandler);
exception when utl_file.invalid_path then
raise_application_error(-20023,'bhrigu ,chk the path');
end;
the errors
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "SYS.UTL_FILE", line 101
ORA-06512: at "SYS.UTL_FILE", line 157
ORA-06512: at line 4
if u know what this is please tell me
thanks bhrigu
<HR></BLOCKQUOTE>
U need :
1) To have UTL_FILE_DIR param in the init file of the instance with the same directory (don't forget to stop and restart the base)
2) Handled the exceptions listed in the utl_file package (Oracle_home\rdbms\admin\utlfile.sql) in your source.
3) Turn set serveroutput on in SQL*Plus.
Run your procedure and see the error message to debug.
Good luck
null -
I have created a email in Fireworks and wanted to make a line of text a hyperlink that would take the viewer to a page on my website. I want to attach the final document to my email and sending it out.
1) design for no wider than 600px (otherwise it may not fit in email clients).
2) Slice up your newsletter design in segments for images and html areas with the slice tool.
3) add the <a href="http://www.yourwebsite.com">my website</a> link in one of the html areas.
4) export as generic html 4 code, and put the images in a separate folder.
5) upload all the images to your website's server in a folder (you cannot embed images in an email newsletter - they must link to externally hosted images).
6) change all the links in your html page to the ones that were loaded up on your server. For example, an image's source link would work out similar to this: <img src="http://www.yourwebsite.com/newsletter/image1.jpg" alt="alternate description of your image">
7) open the newsletter with working external images in Chrome or Firefox. Select the entire page content (ctrl-a), and copy it (ctrl-c).
8) create a new email in your mail client. Place the cursor in the body. Paste the newsletter (ctrl-v).
9) send your newsletter to hundreds of recipients, and get blacklisted by several email servers. Receive warning messages from your own hosting provider not to spam other users' email accounts.
10) realize this is too much of a hassle, and instead opt for a service such as MailChimp.
(The result in (9) depends on whether you sent out your newletter only to acquaintances, or not. But even then you might be warned off.)
Btw, many email clients turn off images in an email by default. You must provide the most important content as html, not as images. -
Keep text as text from Fireworks, and not as an image
Hey all first time posting. Anyway I must say I'm simply love discovering roundtrip editing between Dreamweaver and Fireworks, but I've run into a minor problem.
So I create my entire site in Fireworks, import it to Dreamweaver and use roundtrip editing to fix anything up. The problem is that when I create a text field in Fireworks and import it to Dreamweaver, the text becomes an image. This wouldn't make my site very search engine friendly.
p.s. I wasn't sure if I should have posted this in Fireworks or Dreamweaver forum, sorry.CS5 or CS3... it makes little difference. The procedure itself hasn't changed much in 8 years. Don't expect to learn everything from a single tutorial either. You will need to learn HTML & CSS. After you understand code basics, positioning with CSS will become clearer and DW will be much easier to learn.
Start here:
HTML & CSS Tutorials - http://w3schools.com/
Learn CSS positioning in 10 Steps
http://www.barelyfitz.com/screencast/html-training/css/positioning/
Creating your first web site in DW CS5 -
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
DW Starter Pages --
http://www.adobe.com/devnet/dreamweaver/articles/introducing_new_css_layouts.html
Centering Pages, Images and other elements with CSS
http://cookbooks.adobe.com/post_Centering_web_pages_and_other_elements_with_CSS-16640.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Are we able to Flip Text in Fireworks?
Dear friends,
Need a little help.
Are we able to Flip Text in fireworks, or shall we use
different platform?
Like for example
Have a Small Image in Background.
Then have put Text on top of it .. like
"WELCOME" and then after 1-2 seconds changes to
"Enjoy your visit" And then again after 1-2 seconds changes
to
"please e-mail" and then atter 1-2 seconds changes back to
"WELCOME" and repeats
How can we do this
Thanks
OwaisChoose Help > Using Fireworks > Creating Animation.
Here's a tutorial you might find useful.
http://www.informit.com/guides/content.asp?g=flash&seqNum=370&rl=1
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm -
Creating Dreamweaver templates in fireworks
Hello there,
I have just created a image in fireworks CS3 that i would
like to use as the basic template in a website. Now i dont want it
to simply be set as a background on the site, i am trying to put it
into dreamweaver so that i can edit on top of the template. So i
can put text in, hyperlinks, tables images etc. As it stands, i am
farely new to fireworks and dreamweaver, as you can probably tell.
If this fireworks is the wrong peice of software for creating
templates to be used in dreamweaver, could you please recomommend a
peice of software i should use instead.
Thanks a lot
- Ryanquote:
Originally posted by:
jonzi_456
Hello there,
I have just created a image in fireworks CS3 that i would
like to use as the basic template in a website. Now i dont want it
to simply be set as a background on the site, i am trying to put it
into dreamweaver so that i can edit on top of the template. So i
can put text in, hyperlinks, tables images etc. As it stands, i am
farely new to fireworks and dreamweaver, as you can probably tell.
If this fireworks is the wrong peice of software for creating
templates to be used in dreamweaver, could you please recomommend a
peice of software i should use instead.
Thanks a lot
- Ryan
Use Dreamweaver, of course.
Fireworks is a graphics program. It is not designed to
produce robust HTML, much less templates for Dreamweaver.
Fireworks' HTML is for mockup/prototype use only. Use Fireworks to
create your mockups, then your Web site graphics.
Dreamweaver is a heavy-duty Web site design, development, and
production program. Use Dreamweaver to build an HTML page based on
your Fireworks image, then use Dreamweaver's Save as Template
command, making sure to mark areas where you want to be able to
enter/edit content. After that, you can create new pages using your
template.
Good luck! -
Creating dynamic text in the picture
I created a picture where the background has a gradient color
and i putting some data base information in between the picture? i
try using firework to slice out as a HTML so in order for me to put
the text but i will not have the background color..
can anyone help me or teach what can i do? if anyone don't
understand i have upload a picture so will understand what i'm
trying to say:
http://jlkh82.spaces.live.com/?_c11_PhotoAlbum_spaHandler=TWljcm9zb2Z0LlNwYWNlcy5XZWIuUGFy dHMuUGhvdG9BbGJ1bS5GdWxsTW9kZUNvbnRyb2xsZXI%24&_c11_PhotoAlbum_spaFolderID=cns!673C40D6295 213D8!244&_c11_PhotoAlbum_startingImageIndex=0&_c11_PhotoAlbum_commentsExpand=0&_c11_Photo Album_addCommentExpand=0&_c11_PhotoAlbum_addCommentFocus=0&_c=PhotoAlbumA picture doesn't help. We need to see the html to understand
how you built the page. In any case, inserting the text into that
space should be trivial. Please post a url to the site. -
HOw to create a text file in the given path and delete it after the use?
Hi all,
I am trying to create a text file at the given path and delete the created file after the use.
I am using following code.:
import java.io.*;
// write binary data as characters
public class RanIO {
public static void main(String f[])
// First illustrate append
String lineSep = "\n";
try {
File temp= new File("C:/Ash","cute.txt");
boolean ch=temp.createNewFile();
if(ch)
System.out.println("file created");
else
System.out.println("file Not created");
//writing to file
/* PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
p.print("Emp NO");
p.close();*/
// Open fileWriter in append mode
FileWriter fos = new FileWriter(temp, true);
BufferedWriter bw = new BufferedWriter(fos);
PrintWriter pw = new PrintWriter(fos);
double d=550;
// lineSep = System.getProperty("line.separator");
pw.print("Hello");
//pw.print( lineSep );
pw.print( d );
pw.close();
boolean det=temp.delete();
if(det)
System.out.println("File deleted");
else
System.out.println("File not deleted");
} catch (IOException ioe)
System.out.println( "Append IO error:" + ioe );
My problem:
1)
I am not able to write to the file. I want to know, where i am going wrong.
It is giving error message like
"Canot resolve Symbol: temp,"
But, FileWriter Constructor should accept a File type parameter.
here temp is a file parameter.
If i am not using file=new file();
i can't delete the file after the use. i.e if i use
PrintWriter p = new PrintWriter(new BufferedWriter(new FileWriter("cute.txt",true)));
how can i delete cute.txt after the use?
2)
I am not able to write to the text file. file is created but, a blank file.
"Hello" is not written into the text file.
can anyone help me in this regard
Thanks in advance
AshviniThank you Ram,
But, i want to create a text file in Append mode.
for that i used
FileWriter fos = new FileWriter(temp,true); But, it is not accepting FileWriter constructor in
this format. if i use
FileWriter fos = new
FileWriter("c:/ash/cute.txt",true); it works fine. !!!!!Here's the javadoc
public FileWriter(File file,
boolean append)
throws IOExceptionConstructs a FileWriter object given a File object. If the second argument is true, then bytes will be written to the end of the file rather than the beginning.
Parameters:
file - a File object to write to
append - if true, then bytes will be written to the end of the file rather than the beginning
Throws:
IOException - if the file exists but is a directory rather than a regular file, does not exist but cannot be created, or cannot be opened for any other reason
Since:
1.4
Are you using jdk.13 or lower ?
>
ONe more doubt, Does flush method deletes a file?
if not, then i need to use
File temp=new File("c:/ash/cute.txt");
FileWriter fos = new FileWriter(temp,true); //which
is again a problem
if(temp.delete())
out.println("File is deleted");
}I don't know whether i am taking it wrong ! or
anything wrong with my coding ! but, after creating
and writing data into a text file. I must delete it
as it contains confidential informations.
Regards,
Thanks.'flush' writes to a file immediately. Else you should explicitly call 'flush' to write contents from buffer to underlying source.
javadoc again
PrintWriter
public PrintWriter(Writer out,
boolean autoFlush)Create a new PrintWriter.
Parameters:
out - A character-output stream
autoFlush - A boolean; if true, the println, printf, or format methods will flush the output buffer
cheers,
ram.
Question; What do you gain by opening a file, writing to it and deleting it in the same program ? -
How to create a text editor, the one like header text in PO
Dear Ones,
My requirement is that I want to create a text editor for storing terms and condition plant wise.
The editor should be the one like header text in PO. It can take end number of lines.
I created the text object ('TERMS') in table ttxob and text for it in table ttxot.
Also created text id ('L000' and 'L001') in table ttxid and text for it in table ttxit.
Now using FM read_text, save_text and edit_text, I have written a program but it does not save the data.
When I run the program initially it displays me blank, then I enter some data into it. Again when I come back it displays the data and also saves the edition. But if I close my session the data is gone.
It means it is not actually saving the data in database. My code is as below:
*& Report ZAK_TEXT_EDITOR
REPORT zak_text_editor.
DATA : head TYPE STANDARD TABLE OF thead WITH HEADER LINE,
line TYPE STANDARD TABLE OF tline WITH HEADER LINE.
DATA : tdname TYPE thead-tdname.
SELECTION-SCREEN : BEGIN OF BLOCK blk WITH FRAME TITLE text-001.
SELECTION-SCREEN : SKIP 1.
PARAMETERS : id TYPE thead-tdid OBLIGATORY
MATCHCODE OBJECT zak_textid.
SELECTION-SCREEN : SKIP 1.
SELECTION-SCREEN : END OF BLOCK blk.
START-OF-SELECTION.
CONCATENATE 'TERMS' id INTO tdname.
head-tdobject = 'TERMS'.
head-tdname = tdname.
head-tdid = id.
head-tdspras = sy-langu.
head-tdlinesize = 132.
APPEND head.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = id
language = sy-langu
name = tdname
object = 'TERMS'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
TABLES
lines = line
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
client = sy-mandt
header = head
INSERT = ' '
SAVEMODE_DIRECT = ' '
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
TABLES
lines = line
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'EDIT_TEXT'
EXPORTING
DISPLAY = ' '
EDITOR_TITLE = ' '
header = head
PAGE = ' '
WINDOW = ' '
save = 'X'
LINE_EDITOR = ' '
CONTROL = ' '
PROGRAM = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER =
RESULT =
TABLES
lines = line
EXCEPTIONS
id = 1
language = 2
linesize = 3
name = 4
object = 5
textformat = 6
communication = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.CONSTANTS:
line_length TYPE i VALUE 254.
DATA: ok_code LIKE sy-ucomm.
DATA:
Create reference to the custom container
custom_container TYPE REF TO cl_gui_custom_container,
Create reference to the TextEdit control
editor TYPE REF TO cl_gui_textedit,
repid LIKE sy-repid.
START-OF-SELECTION.
SET SCREEN '100'.
MODULE USER_COMMAND_0100 INPUT *
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
The TextEdit control should only be initialized the first time the
PBO module executes
IF editor IS INITIAL.
repid = sy-repid.
Create obejct for custom container
CREATE OBJECT custom_container
EXPORTING
container_name = 'MYCONTAINER1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Create obejct for the TextEditor control
CREATE OBJECT editor
EXPORTING
wordwrap_mode =
cl_gui_textedit=>wordwrap_at_fixed_position
wordwrap_position = line_length
wordwrap_to_linebreak_mode = cl_gui_textedit=>true
parent = custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
gui_type_not_supported = 5
others = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT -
How to create a text prompt in Flex?
I need to create a prompt box with a text field and OK/cancel
buttons. I need to capture what the user enters into the text field
an store it.
I have done confirmation boxes before:
Alert.show("Reset the Application?", "Alert", Alert.OK |
Alert.CANCEL, this, alertListener, null, Alert.OK);
But how do I get a text prompt?You should just create a separate component. You can use
PopupManager to create the component like Alert is created. -
I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time . -
Using AppleScript to create a text file, based on an OCR'd file's content
Hey guys, I've got an interesting situation.
I was wondering if there would be anyway to use something like AppleScript (or the like) to create a text document and fill it with information based on what is found in an already OCR'd file?
For example: I have a paycheck stub. The stub contains the words "Gross Pay" and the value "$xxxx.xx" on one line. Using Hazel to identify paychecks (based upon filenames), could I then use something like AppleScript, to create a new text file, and then pull the text from the line that contains the word's "Gross Pay" and insert it into the text file's next line?
Ex:
March 26,2012
Gross Pay $xxxx.xx
April 6,2012
Gross Pay $xxxx.xx
Kind of how TurboTax's iPhone app pulls text from an image, then uses the values to insert it into the app's appropriate fields?
I know this may be a lot to ask, but any help is appreciated. Thanks!StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time . -
Trying to create a text item with a scroll bar in Indesign 5.5
Is there a simple way to create a scrollable text article in Indesign 5.5? It will later be exported to a SWF as a mini-flash web portfolio.
I would appreciate any help.
I'm new to Indesign.quote:
Originally posted by:
wildfire121
Can someone please help. I am trying to create a text box
with a working scroll bar that will scroll the text in the text
box. Can someone please help me with this?
Do you mean a text box people can type in (for a Web form
entry) or one for displaying your content?
If the first, then you use the textarea tag and scrollbars
appear when the user types more lines that you specify. See the
textarea
description at W3Schools.
If the second, then that's usually done in Flash, but can be
done with CSS. See these two pages:
Dynamic
text with scrollbar (Flash)
Textbox
with scrollbar (CSS) -
Using Automator to create a text box of certain size
I'm very new to using automator... in fact I haven't used it at all, but I am wondering if I can use it to create a text box of the same size each type to type in within preview (a PDF document). Basically I want to click or push something and have a text box be generated that is the same size each time.
Thanks!1. In the Finder actions you will need:
- Get Specified Finder Items, and point it towards the folder that will contain the movie.
- Get Folder Contents - to get what's inside the folder.
- Filter Finder Items - set to filter by 'Name Extension' 'Is equal to' 'mov' and make sure all your video files have the right extension...
- Open Finder Items - in QT Player - note that this might cause problems if there are multiple files in the folder...
Then from the QT Player actions:
- Play Movies.
2. Save As... Application, then after saving, drag the app into the login items for the user account.
3. That's going to need some AppleScript, but this thread should get you started:
http://discussions.apple.com/thread.jspa?threadID=455825&tstart=0
Ian
Maybe you are looking for
-
I need photo and video editing...but obviously don't want to pay for 2 separate plans. Also, it looks like with the single app plan you couldn't even get Premiere/After Effects (for instance) together for $20 a month, just one or the other? I've sear
-
Reading an external property file for adapter configurations (How-To)
One thing that has bugged me is having to change an Adapter's property settings in the context file and then build and re-deploy the bundle to effect those changes. This really becomes a problem when you want to test a bundle in different server envi
-
No rounding with rounding profil when conversion Roundg Unit Purch Unit
Hello, I have a trouble when I try to make a purchase order with a material which has this data: Base unit ST Purchase unit on info record : CAR Rouding profil on info record : only with unit PAQ (%+ 50 ; %-50) Variable purchase order unit : 1 active
-
WebDynpro ABAP : Error when calling ME23N with URL
Hi all, I have some problem with my WDA. I have an ALV in web dynpro and it displays Document number for Purchase Order. When a user clicks on it, we call SAP WEBGUI using ITS and I create dynamically URL to display the document. But I can't set the
-
Use of activating SAP default ATM window in DBACOCKPIT
Hi Friends, As part of Glive implementation SAP asking us The SAP default ATM window is not configured/active. What is the use of ATM Configuration and Diagnostics. What are advantages of we activating SAP default ATM window using DBACOCKPIT. Please