Creating custom error message

Hello,
I'm a newbie as well and I'm being migrated from LabWindows to LabVIEW. I'm trying to use the "General Error Handler" VI to handle some problems if there is a problem on the GPIB Bus. I'm a bit confused and befuddled with it. I need to supply my own message to the technician about the set up and what needs to be done if there is an error on the GPIB bus. How does one set that up?
I've included a sample VI so you can get an idea how I am setting this up.
Steve
Attachments:
gpib.vi ‏35 KB

Hey,
You can build your own error codes under Tools>Advanced>Edit Error Codes
BR, Ch.

Similar Messages

How to create Custom error message in SharePoint 2013

Hi,
I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
Is there any way to create any custom error page or can I manipulate SharePoint default error page?
Any help?
Thank you

Hi,
You can create an event receiver to set the validation error messages. One such post to redirect the custom error page is as follows
https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
Create custom error page for SharePoint event receiver
Please mark it answered, if your problem resolved or helpful.

Can I create custom error message

I need to tell the user "NO listeners on GPIB::0:11 address, make sure instrument is connected". How do I use the Simple Error Handler to tell the user this. The error handler spits out error code 1073807265 when this does occur.

Hello,
I believe Dennis' last note probably meant that he would not recommend editing the -errors.txt file to remove the code. In your case, I think the best solution is to, as you suggest, unbundle the error cluster and programmatically deal with it by launching a dialog box with your comment. You can do this using the One Button Dialog function found in the Time & Dialog pallete.
Repost if you continue to have trouble!
Best Regards,
JLS
Best,
JLS
Sixclear

How to create a help view for a customized error message

Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, Wen

Hi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

Catch datetime exception and custom error message in SSRS

I currently working on create report by using SSRS. I have 2 parameters: [Start date] and [End date] to filter data from database and show it on report. I want to validate 2 datetime parameter as describe above. Please tell me a solution to do this.
For example:
When user type the text like: 4/15/2014mmm => System validation thrown a message: [The From Date not correct type]
But in my case, I want to receive a custom error message by myself.(Look like: [Date Invalid!])

Hi Brain,
According to your description, you have a report with two parameters for user to input. Now you want to validate these two parameters and display custom error message when the date is invalid. Right?
In Reporting Service, it doesn’t provide any interference for us to modify the system error message (the text in grey color). That means we can’t modify the system message when error occurs. However we can create a textbox in this report, use custom code
and expression to display the custom error message. But this all based on the report is successfully running. So if error occurs during report processing, all the custom code and expression will not work. In this scenario, we find a workaround for you. We
use custom code to judge if the date is valid, if the users type an invalid date, we return a default value to make sure this report can successfully run. Then we use expression to control the visibility of tablix in this report and create a textbox to show
the custom error message. Your case has been tested in our local environment. Here are steps and screenshots for your reference:
Go to Report Properties. Put the code below into custom code:
Public Shared a As Integer=0
Public Shared Function IsDate(d1 As String,d2 As String) as Integer
        Try
           FormatDateTime(d1)
           FormatDateTime(d2)
        Catch ex As Exception
                   a=1
        End Try
return a
End Function
Create two parameters. One is StartDate, the other is EndDate. Set the data type of these two parameters Text.
Create a filter for StartDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!StartDate.Value,"1/1/2012")),CDate("1/1/2012"))
Create a filter for EndDate, put the expression below into Value:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,CDate(IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,Parameters!EndDate.Value,"1/1/2013")),CDate("1/1/2013"))
Ps: In step3 and step4, the date(“1/1/2012”, “1/1/2013”) in the expression are the default we set to make sure the report can successfully process. You can set any date existing in your dataset.
Use the expression below to set the visibility of the tablix:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,false,true)
Create a textbox, put the expression below into it:
=IIF(Code.IsDate(Parameters!StartDate.Value,Parameters!EndDate.Value)=0,"","Date invalid")
Save and preview. It looks like below:
Reference:
SSRS Calendar and Date Restriction
Errors and Events Reference (Reporting Services)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to show custom error message in WebADI Excel template?

Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
Narasimha

The custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR          BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING        BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR          BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
   PROCEDURE upload_data (
                          P_CONTAINER_ID IN VARCHAR2
                        , P_SAIL_DATE IN DATE
                        , P_PO_NO IN VARCHAR2
                         ) IS
    --declare
    lv_err_msg      VARCHAR2(240);
    lf_err_flag     NUMBER := 0;
    ln_temp         NUMBER;
    BEGIN
    --------------------- checking for mandatory parameters---------------------------
      IF (P_CONTAINER_ID IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
      END IF;
      -------------Validation for Sail Date Format----------------------
      IF (P_SAIL_DATE IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
      ELSE
         BEGIN
            SELECT 1
              INTO ln_temp
              FROM DUAL
             WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
         END;
      END IF;
      -------------Validation for PO_Number----------------------
      IF (P_PO_NO IS NULL) THEN
         lf_err_flag := 1;
         lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
      ELSE
         BEGIN
            SELECT count(1)
              INTO ln_temp
              FROM PO_HEADERS
             WHERE Attribute4 = P_PO_NO;
         EXCEPTION
            WHEN NO_DATA_FOUND THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
            WHEN OTHERS THEN
               lf_err_flag := 1;
               lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
         END;
      END IF;
     -----------------------Insert Record----------------------------
     IF lv_err_msg is NULL THEN
     BEGIN
         INSERT
          INTO XXP2P_HW_COST_FACTORS_STG
                 CONTAINER_ID
                ,SAIL_DATE
                ,PO_NO
                , ERROR_FLAG
                , ERROR_MSG
               ,CREATED_BY
                ,CREATION_DATE
                ,LAST_UPDATED_BY
                ,LAST_UPDATE_DATE
                ,LAST_UPDATE_LOGIN
            VALUES
                 P_CONTAINER_ID
                ,P_SAIL_DATE
                ,P_PO_NO
                ,lf_err_flag
                ,lv_err_msg
              ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.USER_ID
                , trunc (sysdate)
                ,FND_GLOBAL.LOGIN_ID
              -- commit;
              DBMS_OUTPUT.put_line
                '-' || 'After ap_invoices_interface'
        EXCEPTION
        WHEN OTHERS THEN
          ROLLBACK;
          lf_err_flag := 1;
          lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
          raise_application_error(-20001, lv_err_msg);
        END;
    ELSE
          raise_application_error(-20001, lv_err_msg);
    END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;

Cannot display custom error message in CRM_MKTLIST_BADI

We did implement the following BADI BADI Name: CRM_MKTLIST_BADI
Interface: IF_EX_CRM_MKTLIST_BADI Method: MAP_AND_CONVERT_DATA
This enhancement is for suport the extension field for create new BP in
external list management (transaction CRMD_MKTLIST). The BP creation
process work properly but we cannot display our custom error message,
only SAP standard error message is shown. We did try using the export
parameter ET_MKTLIST_E but it does not work as expected, custom message
still cannot display.
How we can be show the custome error message ?
Thanks in advance.
Supreeya K.

Hello Supreeya,
have you tried to post this question in the SAP CRM: Webclient UI - Framework forum?
Regards
Gregor

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Custom error messages on while validating User profile

Hi,
I have developed a valadation handler to validate data of a user while creating/updating.
If any of the attribute valation failed then my ValidationFailedException is getting triggered but it is showing my custom message on the server logs and on UI console i am getting "Server error occured" message. It is not display my custom errror message on the ui console.
Please let me know the steps to perform to show my custom error messages on ui console.
Below are the steps I followed.
1) Develeped a class which implements ValidationHandler.
2) Imported plugin into MDS database
3) Imported EventHandler xml into MDS database.

{thread:id=2256511}
-Bikash

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

Customer error message in sales order on save

Hi Friends,
as per requirement i have to raise the error message and system should enable the field to change values. This should happen when condition is not met on Saving of Sales order.
For this, i have used the user exit USEREXIT_SAVE_DOCUMENT_PREPARE. But the problem is system throwing error message and all r in display mode only. as per my requirement system should allow to change the error value field.
i have verified many posting in this SDN, but nothing is working out.
Please guide me, how to raise the error message and system should enable that filed.
My doubt is where should i raise the error message in sales order (MV45AFZZ)??? if any badi to raise the error message also fine for me. I tried many ways like... message with display like..... and set / get parameters and badis.... but not able to find the correct solution.
Thanks in Advance.
Bala

Hi
You need to use check for enahcement spot, which will be help to you.
Bcz you are throwing custom error message in the standard transaction, once the error is display, you could not able to change the values. your prob can be solved by using the enhancement sport.
This is include name (Include:MV45AF0B_BELEG_SICHERN).
In the above include, you need to create a enhancement spot after this spot (ENHANCEMENT 16 OI0_COMMON_SAPMV45A.)
write your custom code and while displaying an error message. set flag = 'x', then use below code. It will display error message once you press ENTER, you will get the sale order in change mode, you change the values.
IF flag = 'X'.
          fcode = fcode_gleiche_seite.
          perform fcode_bearbeiten.
          ch_subrc = 4.
          exit.
        ENDIF.

Custom error messages OIM11g

Hi,
Can anyone let me know how to throw custom error messages while creating users for custom fields / attributes in OIM 11g?
In 9i, we can attach custom error adapter in Data Object information of Users form. But in 11g, this feature is not available.
- Kalyan

I didn't tried this but you can check this link
Re: How to use custom error message definition in OIM 11g?

Custom error message for Back Button Error

I am using JDeveloper 9. I have tried to create a custom error message to handle a "Back button" press.
But the error message is usually ignored and the system's regular "Stale data" message appears. Is there a way to prevent the system's message from appearing and to raise a custom error message?

Do the following coding in your processRequest() of the Create or udpate page.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
// If isBackNavigationFired = false, we're here after a valid navigation
// (the user selected the Create button) and we should proceed
// normally and initialize a new employee.
if (!pageContext.isBackNavigationFired(false))
// We indicate that we are starting the create transaction (this
// is used to ensure correct Back button behavior). Note that you
// can assign whatever name you want to your transaction unit.
TransactionUnitHelper.startTransactionUnit(pageContext, "empCreateTxn");
// This test ensures that we don't try to create a new employee if
// we had a JVM failover, or if a recycled application module
// is activated after passivation. If these things happen, BC4J will
// be able to find the row that you created so the user can resume
// work.
if (!pageContext.isFormSubmission())
OAApplicationModule am = pageContext.getApplicationModule(webBean);
// Call your method to handle creating the new row.
am.invokeMethod("createEmployee", null);
else
if (!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "empCreateTxn", true))
// Get the purchase order number from the request.
String orderNumber = pageContext.getParameter("headerId");
MessageToken[] tokens = { new MessageToken("PO_NUMBER", orderNumber)};
OAException message = new OAException("ICX", "FWK_TBX_T_PO_UPDATE_CONFIRM", tokens,
OAException.CONFIRMATION, null);
// We got here through some use of the browser "Back" button, so we
// want to display a state loss error and disallow access to the page.
// If this were a real application, we would probably display a more
// context-specific message telling the user they can't use the browser
// "Back" button on the "Create" page. Instead, we wanted to illustrate
// how to display the Applications standard NAVIGATION_ERROR message.
OADialogPage dialogPage = new OADialogPage(message);
pageContext.redirectToDialogPage(dialogPage);
} // end processRequest()
--Prasanna

Custom error message thrown from plugin

I have written a username generation plugin in OIM11gR2. It gets called when i try to create a user from the create user page in the identity console.
The plugin code throws an exception for some business condition.
For ex:
@override
public String getUserName(Map<String, Object> requestData)throws UserNameGenerationException {
if(<SOME CONDITION>)){
throw new UserNameGenerationException("Database is Down", "DB_ERROR");
The alert message is appearing in the UI but it says:
"Localized message not available. Error returned is: java.util.MissingResourceException: Cant find resource for bundle java.util.PropertyResourceBundle, key DB_ERROR "
Where do I need to configure the error messages??? is there any specific property file? Also, is the above way of throwing the exception correct?
Regards.

check this:
How to use custom error message definition in OIM 11g?

Creating custom error message

Similar Messages

Maybe you are looking for