Creating custom frame size for ProRes?

This would be an addendum to my previous question about frame sizes.
Say I have a bunch of odd-sized png files ... and want to convert them to a ProRes HQ clip ... but they have this odd size (which we need to keep). 1428 x 1050. Can I make an odd frame size ProRes HQ 8 bit clip? And if so, any tips on how to do it right?
Ben

This Forum is to discuss issues of the forums. Best to post in Forum of application you are using. Here is link to list. http://forums.adobe.com/index.jspa

Similar Messages

Can no longer create custom page size for printing to PDF?

When printing from FrameMaker to PDF in Windows, I used to be able to create a custom page size by clicking on the Add button that appeared to the right of the Adobe PDF Page Size window, in the Adobe PDF Document Properties dialog box. With Frame 9, that button no longer appears; in fact, the whole dialog box is cut off just inside the edge of the entry windows. Do I need to set something? Thanks for any help you can offer. - Cindy Shaler

Cindy,
I am not sure to what dialog boxes you are referring.
In the PDF Setup dialog box (in FrameMaker's Print dialog or Save as PDF dialog), the Settings tab displays two fields to change the width and height of the paper. I tried entering odd values, and the resulting PDF had the entered size. I see no Add button nor is the dialog box cut off.
Maybe I am not looking at the correct boxes.
Van

Anyway to create custom page size for designjet 500? wasting way too much paper!

just got a hp designjet 500 from jobsite. hooked up to mac. everything prints fine................
EXCEPT
ok i did a simple test 'strip' in adobe illustrator setting the width of the document to 36" which is the size of the paper roll i'm using. i had placed a couple of strips of the same objects with different color fills close to the bottom of the 'artboard'. when going to select print i realized that the printer only recognizes standard page sizes and does not allow me to change to a custom size to say like 36"w by 4" h. so the print came out in the center of a 48" long size piece of paper which obviously wastes soooo much paper.
so i can't create a custom size print page is there a way to have it print close to the bottom margin, turn off the cutting feature, print it, cut manually then move the paper back via the machine or would i have to do it manually and realign the paper and setup after every print?
thanks in advance!

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Be sure to mention your operating system when you post there.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Set custom page size for printing

I want to set a custom page size for printing some PDF three and four-page musical scores to roll paper on an Epson 1290 using Adobe Reader 9.3.4 on Ubuntu 10.04. The printer properties in the print dialog has a media size option, and one of the choices is "custom", but having chosen "custom", the dialog does not allow me to add the actual page size to the lpr printer command. I can see that when I choose "custom", the lpr command is
lpr -P Stylus-Photo-1290 -o PageSize=Custom etc
but what I need for a three page output, for example, is
lpr -P Stylus-Photo-1290 -o PageSize=Custom.297x630mm etc
and I can't see how to add the actual custom paper size. If I Ok the media size choice dialog with it just set to PageSize=Custom, I can see from the output preview in the print dialog that the actual page size that has been chosen is letter. The online Adobe doc for Reader 9 printing (http://help.adobe.com/en_US/Reader/9.0/content.html#heading2.3) says "For documents that are larger than the standard page size, go to File > Page Setup. Create a custom page size before you print your document". The problem with that is that there is no "Page Setup" option on the File menu in the Unix version of Adobe Reader, only a "Print" option, which is where I already am.
If I open the PDFs in Evince, it allows me to add the custom page sizes I want, but as Evince doesn't have the option to print multiple pages per sheet I can't use it either...

Yes, it used to work, and the resize zoom bar used to work too (now its grayed out). I don't know if this is a "who's to blame for it" thing, but its not getting fixed and its pretty bad that no one seems to care enough even to respond. I found my own solution by opening it in Gimp. Just right click and select open with other ...Gimp and it will import into it. In the Gimp Print dialog, you have a scaling percentage in the "Page Setup" tab, and size settings in the "Image settings" plus loads of other stuff including multiple copies.

How do I set custom frame size in Premiere Pro 5.5 sequence.

I need to set a custom frame size in Premiere Pro 5.5.
I can't edit a preset so how do I create my own?

If you realy feel 'lazy' or have no idea what settings to choose you can drag the clip the into the New Item icon. This will create a matching sequence.

Custom Printing Size for 5520

Hello,
I have a HP 5520 and a Mac computer with a OS X 10.6 operating system. I'm trying to create a custom paper size to print a 5.25 x 5.25 in card. This isn't a typical paper size and am having trouble figuring out how to create a custom paper size. I know that I can do it because I've done it in the past but unfortunately do not remember how I figured it out. Any help and step by step instructions would be very much appreciated!
Thanks!

Hi @tbot0712,
Welcome to the HP Forums!
I understand that you are trying to create a custom printing size on Mac OS X 10.6 for your HP Photosmart 5520. I am happy to look into this for you!
According to this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X. Follow these steps to create and use a custom paper size in Mac OS X.
Step one: Create the new custom paper size
Load the custom-sized paper into the paper input tray.
In the software you are printing from, click File, and then click Page Setup.
From the drop-down list, select the name of your printer if it is not already selected.
Click Manage Custom Sizes in the Paper Size drop-down menu.
Click New, and then type a name for the custom paper size in the Paper Size Name box.
note:
Do not use an existing paper size name for your new custom paper size name. For example, if a custom paper size is named A4, then the existing A4 paper size is no longer be available as a choice. Use a different, unique name for the custom size paper.
In the Width and Height boxes, type the dimensions and set the margins, if desired.
Click Done or OK, and then click Save.
Step two: Select the new custom paper size
Click File, and then click Page Setup.
Select the new custom paper size, and then click OK.
Click File, and then click Print.
Select the Paper Handling panel.
Under Destination Paper Size, click Scale to fit paper size tab, and then select the custom paper size.
Change any other print settings, and then click OK or Print.
Hope this is the information you were looking for, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can't print using custom paper size for HP6520

I'm trying to print Hobby Lobby RSVP cards for a wedding. The size is 5.5" X 8.25". My HP6520 keeps giving me an error that the printer has detected a different size of paper and it won't print. I've gone to Custom and set the size to match, but it still won't print. I have the paper in the bottom tray.

Hi @Saltman1,
Welcome to the HP Forums!
I noticed that you cannot print on a Hobby Lobby RSVP card size is 5.5" X 8.25" with your HP Photosmart 6520 on Windows 8. I am happy to look into this for you!
According to your printer's specifications, this is an unsupported card size for this printer. The supported card sizes are:
Card type
Card size
3 x 5 in Index
76.2 x 127 mm (3 x 5 in)
4 x 6 in Index
101.6 x 152 mm (4 x 6 in)
5 x 8 in Index
127 x 203.2 mm (5 x 8 in)
However, as a workaround, you might be able to assign an alternate driver by going to this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R, and then doing a custom size print by going to this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
Otherwise, I would suggest getting the proper size of paper for this printer as indicated in the chart above.
Hope this information clears things up for you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Advice on sequence settings - frame size for VHS video in FCP

Hello,
I was hoping that I could get some advice on editing and output for video captured from VHS Tapes to ensure the best quality possible.
My current workflow to digitize the VHS tapes is:
VHS signal from JVC S7600u with TBC into ADVC 300 (no de-interlace or other filters set) into a Mac Pro via firewire. Capture preset in FCP is DV NTSC 48khz.
Once in FCP - the captured VHS video frame size is 720 X 480, Vid rate is 29.97, pixel aspect is NTSC-CCIR 601 and field dominance is lower (even)
My questions are:
If my final destination is for You Tube sharing , are these the best sequence/ frame size settings or should I convert the sequence frame size to 640 X 480, or should I leave at 720 X 480 while working in FCP and then output to Compressor and select the H264 you tube sharing video setting and change the frame size to 640 X 480?
Should I de- interlace for internet/youtube destination?
Should I de-interlace for DVD/TV destination?
If I want to burn the finished project to DVD and watch the video on a progressive montitor/ TV screen, what would be the best settings/frame size for that?
If any of you out there have experience with editing vcr/analog video in FCP and have a good workflow to ensure best quality, I would really appreciate any advice/suggestions.
Thanks in advance.

Digitize to 720X480 frame size in FCP. In compressor, your YouTube preset will automatically deinterlace and a square pixel aspect ratio.No deinterlacing for DVD.
Russ

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Create coustom page size for Smartforms

Dear All
How to create coustom page size for smartforms.
rgds
pramod

HI
To define a new page format, choose
Administration -> CCMS -> Print->® Spool Administration.
Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and Create or Create with Reference. Fill out the fields on the next screen.
Activating a New Page Format
Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
You also have to define a format and device type format for the new page format before you can use it.
Thanks and Regards
Santosh Kate

How to create customer master data for walking customer in retail

hi experts !!!!!!
for retail industry e.g books trading industry
how to create customer master data for walking customer in retail
its dummy or one time customer
if i create one time customer then same customer number can i use for every new order and every new customer how ?????
thanks

Dear Hanumant,
As per my view,,
You can use one time customer functionality to full fill your requirement.
When you create sales order with one time customer system take you to the customer data maintanence screen through that you can maintain the one time customer data.
Same one time customer number you can use for every new order through maintaining different data.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 19, 2008 6:08 AM

User exist to create custom error messge for service entry sheet

Hi,
Can any body tell me any user exist to create custom error messge for service entry sheet?
Thanks,

Hi
Can you please elaborate on the business scenario??
You may look at EXIT_SAPLMLSR_020 or EXIT_SAPLMLSR_021 for this purpose.
Regards
Prasad

Do I need FC Pro for custom frame sizes?

I recently purchased Final Cut Express HD for editing computer based software training videos. These videos are captured using Snapz Pro X2 at 1024x768 and will be played back on a computer at the same size, or reduced to 800x600. They won't be output to tape or DVD.
I thought FCE HD would allow me to edit at 1024x768 resolution but I now it seems that isn't possible.
Am I correct that FCE HD won't let me edit at the frame sizes I specified? Do I need Final Cut Pro 5?
Thanks,
Mythago
Mac Mini (PowerPC 1.25) Mac OS X (10.4.5) 1 GB RAM, 250GB Firewire External

FCEHD will let you use QuickTime videos of different frame sizes, but it will only output in 720x480 (NTSC) or... whatever the PAL rez is.
Keep in mind that your maximum resolution for DVD output is (essentially) 640x480 anyway, in square pixels. So, even if you were to edit in 1024x768, you will need to downsample it in order to get it on DVD.
On other training videos, I've often seen them show the full screen for some parts, but then zoom in on the areas where they're doing action. That would definitely be possible in FCEHD. For the full screen shots, scale the computer screen image to fit in the frame. Then, when you need to show detail, cut the clip and scale it up to make it bigger, and center the action in the video frame.
Look at some training DVD's by places like Digital Tree or someplace like that to get some ideas on how to do that. Hope that makes sense.

UITableView with custom frame size within a UINavigationController... how?

I've seen similar questions asked all over the web, but so far not a single "real" answer has cropped up, so hopefully you folks will know the way to do this.
I have a main view that with a UIView subview, inside of which I am programmatically adding a UINavigationController and UITableView that is encapsulated in a +regular UIViewController+, to allow it to be pushed/popped onto the navigation controller. I'm essentially just trying to get a table+navcontroller combination that only takes up about half the screen height.
The problem isn't that it doesn't work, because I have no problem getting the table and navigation controller working together as expected. The problem is that no matter what I do or try, I cannot get the table view to be smaller (in height), than full-size, meaning that when contained in this ~200px navcontroller-in-subview, there are a large number of rows the user cannot select because attempting to scroll to them immediately "bounces" back. You can see that the rows are there when you "pull" the scroll down, but can never get it to stay.
As it appears, the table view is too large in height. I've gone as far as setting the table to a height of 10, to no avail. Autoresize masks have no effect.
Please note that I'm NOT using an instance of UITableViewController, but rather the plain vanilla UIViewController, because creating an instance of the former automatically creates the underlying UITableView, which was always sized to large, as well. I had some advice that I should attempt creating the table and view controller independently, add the former to the latter and then push the view controller onto the navigation controller. Again, this does work, but the size is all out of whack.
Finally, in quick psuedo-code, this is essentially what I'm doing:
(this is found in MainViewController::viewDidLoad)
CGRect frame = subviewContainer.frame;
frame.size.height = 10;
frame.origin.x = 0;
frame.origin.y = 0;
UITableView* table = [[UITableView alloc] initWithFrame:frame];
table.autoresizesMask = UIViewAutoresizingNone;
UIViewController* tVC = [[UIViewController alloc] init];
tVC.view = table;
UINavigationController* navC = [[UINavigationController alloc] initWithRootViewController:tVC];
[subviewContainer addSubview:navC.view];
Thanks for any tips you might have: this is quite the frustrating problem!

I have an app that is absolutely kicking my butt. I have a UITabBarController that contains a UINavigationController that contains a custom UIViewController. When the user rotates the iPhone, I want to hide the navigation bar, hide the tab bar and swap out a UIImageView in the custom view controller and I want the image to be full-screen. I've figured out how to get rid of the navigation and tab bars, but making the UIImageView full-screen is what's killing me. When the image shows up, it is the size it would be if the tab bar was visible. In the didRotateFromInterfaceOrientation method, I hide the tab bar by doing:
tabBar.hidden = YES;
I've tried resizing the UIImageView by doing:
img.frame = CGRectMake(0.0, 0.0, 320.0, 480.0);
but that just screws up the image even more. I tried resizing the tabBarController's view, and I've tried resizing the current view, but alas to no avail.
Can anyone help me not be stupid?
Thanks!

Converting Frame Size for Final Cut

I have XDCAM HD .mov files that are 1440x1080, which I converted through Streamclip to 1920x1080. And 2 problems arose:
1) the 1st time I imported them in the Project I had the right Frame Size : 1920x1080, but the wrong Pixel Aspect : HD (1440x1080) instead of Square.
2) the 2nd time I looked for an Option in Streamclip to select the Pixel Aspect, but there is none. I imported the 1920x1080 files into the project, and they appeared as 1440x1080 files!!!
I also tried creating a sequence with the desired specs (Frame Size and Pixel Aspect) and said NO when asked to conform the Sequence to the Clip. It worked but the RED Rendering will take forever.
Do you have a better solution?
Could the problem be my Version 6 Final Cut? Or am I missing something? I would be most grateful for any suggestion.

If you have iTunes 9 or higher, go to +iTunes > Preferences > General+. Under 'When inserting a CD' select any one of the three import options. Then click +Import Settings > Import Using > AIFF Encoder.+ In the same panel, click +Setting > Custom.+ Select +Sample Rate = 48Khz, Sample Size = 16 bit, Channels = Stereo.+ Then click +OK, OK, OK.+
Then in your Library, select the song you want to convert. Then do +Advanced > Create AIFF Version.+ iTunes will make a copy of the song & convert it to AIFF.

Creating custom frame size for ProRes?

Similar Messages

Maybe you are looking for