Creating custom schema

Hi,
Anyone pls provide me the steps to create custom schema in oracle database....
i need step by step process with suitable example.....
thanks & regards
vasanth

Hi vasant;
You have to login https://support.oracle.com/CSP/ui/flash.html and you have to CSI account.This site is oracle site for tech. documents for can rise SR etc.. for more details please check
Re: Installing Oracle Database 10.2.0.4
Regard
Helios

Similar Messages

Unable to create a QUEUE in custom schema

Hi,
I was able to create a Type & queue table in custom schema, but using them was unable to create a QUEUE in custom schema
I'm using the following piece
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
Whereas in APPS schema I'm able to create the same queue.
Pls advice ...

Hi,
The only reason is that, we create all the custom objects (owner as custom schema), and a synonym in APPS.
I did not get any error, but the queue, is not getting created
Following are the scripts used
CREATE OR REPLACE TYPE 'XXXXXX_QUEUE_TYPE
AS OBJECT (TYPE VARCHAR2(15));
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE (queue_table => 'XXXXXX_QUEUE_TABLE',
queue_payload_type => 'XXXXXX_QUEUE_TYPE'
END;
BEGIN
DBMS_AQADM.CREATE_QUEUE(queue_name => 'XXXXXX_QUEUE',
queue_table => 'XXXXXX_QUEUE_TABLE'
END;
BEGIN
DBMS_AQADM.START_QUEUE(queue_name => 'XXXXXX_QUEUE'
END;
Thanks.....

Problem creating a form on a table from another custom schema

Hi,
I have a table in a custom schema that i have granted SELECT, UPDATE, INSERT and DELETE to our apex schema. I have created a synonym for this table under the apex schema but I can't build a form for it. If i try adding the form when creating the application, it gives me an error about not having a primary key on the table, which i do. If i create the application with a blank page and then try to add the form, it gives me an error that the table must contain at least one column, which it contains 12. If i view the table in the SQL Workshop, it gives an accurate count of rows in the table but doesn't provide any information about the table and doesn't display the data.
If I login to TOAD under our apex schema and view the synonym object, i can see all of the information about the table - the columns, the primary key, etc. But I can't see it inside the Application Express app.
Can anyone tell me why this is and what i can do to build a form on this shared table?
Thanks,
Troy

Troy,
I suggest you get rid of the synonym and then don't use the Create Application wizard for this purpose. Instead, create the application, then use a create page or create form wizard. It should first ask you for the name of the schema that contains the table. If you get that far, you should be on your way.
Scott

Updating custom schema created using RCU

I followed the following chapter from RCU user guide to create a custom schema using RCU:
[Extending Repository Creation Utility to Configure Custom Application Repositories|http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14259/rcu_extend.htm]
RCU allows only two operations - 1. create a new schema OR 2. drop a schema.
Can RCU be used to update or modify a custom schema, which has been created using RCU itself?
The use case is: update certain rows in a few tables of the custom schema, whenever there is a fix.
Basically we need to deliver patches (insert scripts containing the fixed or corrected data) to the custom schema created using RCU.
Does RCU support this use case?
Thanks,
Mahendra
Edited by: Mahendra Varman on Jun 8, 2011 5:10 PM

Thanks for the suggestions. Having a bad day with this today.
Unfortunately, it did not work. I had to re-install the whole thing with the repository in an 11g database and that didn't work either! (see OBIEE 11g: Cannot log into BI Publisher after fresh Install
Thanks.

What to take into account to create a custom schema?

Hello, we are going to start the process of migrating from Oracle E-business suites R11.5.10.2 to R12; we have been doing our custom applications into the APPS schema. For this upgrade, we would like to start fresh and move all our custom applications to a custom schema to have control of all the customizations. I need your feedback on what are the things we need to take into account to accomplish that.
Please let me know anything that comes to your mind on what to consider, and if you have a good guidance on how to do it should be great.
Thank you.

user8969211 wrote:
Hello, we are going to start the process of migrating from Oracle E-business suites R11.5.10.2 to R12; we have been doing our custom applications into the APPS schema. For this upgrade, we would like to start fresh and move all our custom applications to a custom schema to have control of all the customizations. I need your feedback on what are the things we need to take into account to accomplish that.
Please let me know anything that comes to your mind on what to consider, and if you have a good guidance on how to do it should be great.Please see these docs/links.
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Step By Step Guide to Creating a Custom Application in Applications 11i [ID 216589.1]
Integrating Custom Objects and Schemas
http://docs.oracle.com/cd/E18727_01/doc.121/e12897/T302934T458264.htm#4164796
Can't Open Custom Forms After R12 Upgrade [ID 552010.1]
How To Upgrade 11i Custom Forms To R12 [ID 563258.1]
Accessing Custom Forms After Upgrading From To R12. [ID 451934.1]
Do Not Compile EBS R12 Reports Using rwconverter.sh or Reports Builder from IDS 10gR2 [ID 786794.1]
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

Create New Custom Schema..

HI,
how to Create New Custom Schema.. like apps in EBS 11i..
thnaks

Hi user;
how to Create New Custom Schema.. like apps in EBS 11i..Please check below thread's mention note&advice etc.
custom Schema-r11
Re: REG:creation custom schema
Regard
Helios

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

Adding drop-down list in a custom schema

Is it possible to create a field with a drop-down list of items in a Prelude custom schema? Or, perhaps the ability is provided in the styles: (Integer, Real, Text, Boolean) and I am just not selecting or using those properly.
I notice it is done in some Adobe-provided meta tags, like this one named >Script...
Thanks!
Bobby

Hi Bobby -
Unfortunately it is not currently possible to create an array of items for a given custom metadata field. We do have some feature backlog items in our XMP team to look at making such things possible in the future.
Regards,
Michael

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

What's a good way to manage custom schema for DS 5.1?

What's a good way to manage custom schema?
Custom Schema for Object Class and Attributes
The reason I ask this is because there might be a need in the future where I need to export those custome schema into different branded directory server. I just want to make this as painless as possible.
Right now, I thought of 2 options
1) Create my own LDIF file with my custom attributes and object classes, so if one day I need to export to another directory server, I can just copy that custom created LDIF file over. (Will this work?)
2) Create a JAVA application using JNDI. What this Java App. will do is read through a XML file and create those object classes and attributes on-the-fly. (of course, the XML structure will be predefined by me, so that my Java App. will be able to parse through it correctly. Will this work?)
Anymore suggestion? I would want to hear more advices and suggestions.
Also, I assume that will work even with replication. All I need to update is the master server, and the slaves will replicate automatically.
Thank you very much! :)

Demo: I'm using the nul character to represent the end of the word, so that the data structure can represent that "hell" and "hello" are both in the vocabulary:
import java.util.*;
class Node {
    private SortedMap<Character, Node> children = new TreeMap<Character, Node>();
    //0 <= index <= word.length()
    private void add(String word, int index) {
        if (index == word.length()) {
            children.put(Character.valueOf('\u0000'), null);
        } else {
            char ch = word.charAt(index);
            Node child = children.get(ch);
            if (child == null) {
                children.put(ch, child = new Node());
            child.add(word, index+1);
    public void add(String word) {
        if (word == null || word.length()==0)
            throw new IllegalArgumentException();
        add(word, 0);
    public String toString() {
        return children.toString();
public class Example {
    public static void main(String[] args) throws Exception {
        Node root = new Node();
        root.add("hello");
        root.add("how");
        root.add("who");
        root.add("hell");
        System.out.println(root.toString());
}

Want to create custom report under report field in OEM 11G

Dear all
I would like to create custom report on OEM 11G. I have query which is executed and verified from TOAD. But after placed report element it shows an error that table/view not exits. But it doesn't ask any database user name and password.So let me like to know how to do this. I want add more and more reports after the success of this.. Ho can it be done?Please advice.
Note:-
The data is getting from OEM repository i think so.. But i need a report which is get data from various apps and system tables. So how to display result from this table and shown to EBS reports.
Regards,
Gobinath.R
Associate consultant
Petrofac Information Services Private Limited
Chennai.
Edited by: Gopinath on May 18, 2012 4:23 AM

Report should be based on tables in repository database. Mostly sysman tables we will be using for reporting. If you need other database tables then you need to create dblink to those targets in sysman schemas. To my knowledge that's the only way you can refer to other db tables in reports.
Regards,
Satheesh Shanmugam

Getting error while creating Customer Invoice Request via Web Service

Hello,
I am trying to create customer invoice request via web service.
But I am getting the error message "No scheme configuration found for scheme '&CIRHP&' " continuously.
It is working fine in reference tenant. But using the same payload its giving error in another tenant.
Can you please tell me what is the root cause for this error?
I have included the payload used in the prototype tenant(Payload.txt) and screen shot of the error.
Thanks and Regards,
Sriram

Hi,
Check the WSDL file is wellformed or not..You can test it using tools like XML Spy.
Might be the attribute tag is missing something..If WSDL file is correct then, create proxy by selecting the WSDL file from local machine..
Regards,
Sunitha

Custom Schema in XMP

How does LR handle custom schema or fields in XMP?
I will have files coming in with added XMP fields. Will LR keep and make visible the custom tags? Might it erase the tags when copies to the XMP?
Also, can I create custom tags and write them to the XMP?
Thanks for your help!

It stores the custom data in its database, but doesn't use it at all.
I suggest you try this for yourself. Add some custom metadata outside LR, eg in a Bridge File Info panel, import the file into LR, and then delete those field values in Bridge. Now in LR make an adjustment and select Metadata > XMP > Export. In Bridge, you should see your custom fields again.
John

Query on Custom schema table getting 'Do You want to save changes' message

Hi all,
I am getting the error message whenever I query from the custom table. Here is the description of the issue.
1. I have a button on the first block. When the user clicks on this button , execute_query is called on another block. Then the user getting the message "do you want to save the changes" . Although there are no changes made on the form.
2. The second block is based on a custom table defined on the custom schema.
3. Created public synonym for this table and also gave the all the grants to apps schema on this table.
4. This error was not coming before when the second block is based on Apps schema table.
Any idea on how to fix this.
Thanks

I doubt the problem is related to a schema or public synonym. The message is appearing because the value for an item is being changed after your query executes.
First check to make sure that the blocks that are not based on a table are set to No. See the Database Data Block Property.
If that doesn't solve the problem, then run the debugger and watch to see what item is changing. You may be doing something in a trigger.

Best way to create custom reports

Good Afternoon,
I am completely new to UCCX 9 and Crystal reports, so double newbie. I have been attempting to create customs reports that will not be run by the Historical Reports. I've used the Historical Reporting Admin and Dev Guide along with the DB Schema pdfs, to no avail. Is there a better option? I've seen that the DB can be accessed via SQL applications. The reports that have been requested are rather complex (IMO),
Number of calls accepted and abandoned, with available (Ready and Not Ready) Agents per hour vs scheduledI've been able to create this with two different reports
Calls taken by Agent by hour and status through out the day including times spent in different Ready Codes, Talk times, hold times, etc.
Essentially, can any one guide me to a better resource or option? I appreciate the help. Thank you.
- Jose

Hi,
there's a number of solutions available, you may wish to browse the Solutions Catalog.
Alternatively, you can build your own - there's a number of free and commercial solutions available. Personally, I prefer BIRT.
G.

Creating custom schema

Similar Messages

Maybe you are looking for