Creating custom ui:repeat

Hi,
is it possible for us to build custom loop tag as in JSTL c:forEach begin="" end=""
I built the custom <ct:if > as in JSTL and custom functions but am not able to know how to build this type of tag. Please help.

You can use eZedia QTI to create custom interfaces using QuickTime. I used it to create the Media Skins used on the two movies linked from this page.
http://homepage.mac.com/makentosh/QTITest

Similar Messages

  • Help!!! - When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

    When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
    I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
    Steps I followed in Creating a New customer Profile
    ==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
    *1) Profile Class Tab :*
    a) Balance FWD Billing : Not enabled
    b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
    c) Set Terms as per ur requirement , do allow discount & Override terms
    d) Set Dunning as per your requirement,
    e) Filled in Collectors info as per your requirement with Credit Check enabled...
    f) Receipt --> Auto cash Rule set as 'Standard'..
    *2) Late Charge Profile* Set it as per requirement
    *3) Profile Class Amounts* e.g Say Currency set as "USD"
    a) Credit Limit : 100000
    b) Order Credit Limit : 100000
    c) Minimum Receipt Amount : 1.00
    d) Min statement amount : 1.00
    e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
    f) Minimum Customer Balance : Amount ------> Value: 5.00
    g) Minimum Invoice Balance : Amount ------> Value: 5.00
    h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
    i) mention Type as Fixed Rate, Value : 10
    j) You can avoid setting the Penalty Charge for the time being..
    Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well   I could see this.
    When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

    Hi
    You get this error when profile class amounts are not set for all the currency.  Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
    Regards

  • Border issue when creating custom text captions

    Applicable to: Captivate 5
    OS: Windows XP, SP3
    I seem to be experiencing an issue that I cannot locate an answer too, there are various discussions within the forums related to custom text caption issues but nothing specifc to mine. I hope someone can help.
    I am creating custom text captions for a project I am working on and have read & followed the help documentation related to customising text captions though I seem to be presented with issues displaying the border I have created.
    Scenario 1
    I copied the AdobeBlue1.bmp and associated .FCM from the Captions folder, created my own image based on the size of the .bmp and renamed the .FCM file then placed the 2 files into the Captions folder. Unfortunately the border on my custom image is not showing, all I see is the black background.
    Scenario 2
    I copied the AdobeBlue1.bmp and associated .FCM from the Captions folder, edited the image changing the colours of the border (green) and background (white) and renamed the .FCM file then placed the 2 files into the Captions folder. Unfortunately the border on my custom image is still not showing, all I see this time is the white background.
    Can anyone tell me why this is happening and if there are any ways of controlling the border of the text captions within the Captivate UI? There are various output options when saving the .bmp as I am working in GIMP but I have chosen all of them and this still does not affect the border in anyway, I just cannot see it. Help please!
    Thank you
    Tom

    Hi Rick
    GIMP has various options for saving as bitmap and I needed to save as Windows 24 bit bitmap (default 32 in GIMP). I did as you mentioned and created in a new project and repeated the steps appropriately and that seems to be working great now! Thanks for your help on this one, though it's very pernickity (fiddly)!!!!
    P.S. Formatting in text captions when using variables is a nightmare!!!! Raising on another post though.
    Cheers
    Tom

  • How to create Custom error message in SharePoint 2013

    Hi,
    I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
    But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
    Is there any way to create any custom error page or can I manipulate SharePoint default error page?
    Any help?
    Thank you

    Hi,
    You can create an event receiver to set the validation error messages.  One such post to redirect the custom error page is as follows
    https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
    Create custom error page for SharePoint event receiver
    Please mark it answered, if your problem resolved or helpful.

  • I am planning to create custom defined  DSO Object & Info cube

    Hi ,
                     i am planning to create custom defined  DSO Object & Info cube.what ratio i can calculate what is the keyfields & what are the data fields in DSO.How can i calculate.
                     2. how can i create  suitable dimensions, suitable characterstics  for dimensions.what ratio i can decide.
    Thanks,
    chandu.

    Hi Diego Garu,
                               Thanks for your fast response.i
    VBELN     VBAP     2LIS_11_VAITM                                              0DOC_NUMBER
    POSNR     VBAP     2LIS_11_VAITM                                                0S_ORD_ITEM
    KUNNR     VBAK     2LIS_11_VAHDR                                                 0SOLD_TO
    VBELN     VBRP     2LIS_13_VDITM                                                    0BILL_NUM
    FKDAT     VBRK     2LIS_13_VDHDR                                                 0BILL_DATE
    INCO1     VBRK     2LIS_13_VDHDR(INCO1FieldNot Available in Data Source)     0INCOTERMS
    ZTERM     VBRK     2LIS_13_VDHDR(Payment terms field Not Available in Data Source)                                                                                0UCPYTERMS
    NETWR     VBRP     2LIS_13_VDITM                                                           0NETVAL_INV.
                                           here data is coming from the multible tables.that why i am planning to create custom defined data source based on view. here how can i calucate dso is suitable or cube is suitable.
    suppose dso is suitable how can i decide which on is the data field and which one is the key field.
                                        how can i decide how many dimensions are needed here.and which chara are suitable for that dimensions.
    Thanks ,
    chandu.

  • How to Created custom report for Ship not Billed (SD/FI)?

    Hi all,
    I am anticipating  to write some abap reports..Here is one of them..
    Anyone can help  me with writing a Report , how to do 'Custom Report for shipped not Billed(SD/FI)' ..But since I am new to Abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
    Appreciate your help!
    Regards,
    Boby

    Hi Boby,
    You need to create custom transaction to achive these results.
    you will have selection-screen ,it would be :
    Date : Here date would be mandatory  - Ranges Option
    Customer  - Optional field - Ranges
    Order #  Sales Order (Optional) Ranges
    Invoice #  - Invoice # (Optional) Ranges
    You will get the data based on ur selection-screen criteria ...
    First you will have customer order details from diffrent table
    VBAK,
    VBAP,
    LIKP
    LIPS
    VBRK,
    VBRP
    KNA1,
    VBFA Tables ( See the my sample program )
    Output would be :
    Customer #   Custome Name    Order #   Delivery #   Invoice #   Netpr, Netquantity ,
    Check the condition  whether invoice table has VBRK-RFBSK  = ''.
    See the my sample program : This is sales report by monthly..
    REPORT ZFDSALES_REPORT no standard page heading
                           message-id zwave.
    Data Declaration Part
    TYPE-POOLS
    type-pools : slis.
    Tables
    tables : VBAK,
             VBAP.
    Internal table for VBAK Table
    data : begin of i_vbak occurs 0,
           vbeln like vbak-vbeln,
           bstnk like vbak-bstnk,
           vdatu like vbak-vdatu,
           end of i_vbak.
    Internal table for VBAP and MATNR
    data : begin of i_vbap occurs 0,
           vbeln like vbap-vbeln,
           matnr like vbap-matnr,
           kdmat like vbap-kdmat,
           kwmeng like vbap-kwmeng,
           netpr like vbap-netpr,
           maktx like makt-maktx,
           end of i_vbap.
    Internal tables
    data : begin of i_sales occurs 0,
           vdatu like vbak-vdatu,
           bstnk like vbak-bstnk,
           matnr like vbap-matnr,
           maktx like makt-maktx,
           kdmat like vbap-kdmat,
           kwmeng like vbap-kwmeng,
           netpr  like vbap-netpr,
           end of i_sales.
    Variable for ALV
    data : v_repid like sy-repid,
           gt_fieldcat    type slis_t_fieldcat_alv.
    Selection-screen
    selection-screen : begin of block blk with frame title text-001.
    select-options : s_vbeln for vbak-vbeln,
                     s_erdat for vbak-erdat,
                     s_ernam for vbak-ernam,
                     s_vdatu for vbak-vdatu obligatory,
                     s_BSTNK for vbak-BSTNK,
                     s_KUNNR for vbak-kunnr,
                     s_matnr for vbap-matnr,
                     s_KDMAT for vbap-KDMAT.
    selection-screen : end of block blk.
    Initilization
    initialization.
      v_repid = sy-repid.
    S T A R T  -  O F  -  S E L E C T I O N ****************
    start-of-selection.
    Get the data from VBAK and VBAP Tables
      perform get_vbak_vbap.
    E N D  -  O F  -  S E L E C T I O N *****************
    end-of-selection.
    Display the data
      perform dispolay_data.
    *&      Form  get_vbak_vbap
          Get the data from VBAK and VBAP Table
    FORM get_vbak_vbap.
    Get the data from VBAK Table
      select vbeln bstnk vdatu from vbak into table i_vbak
                         where vbeln in s_vbeln
                         and   bstnk in s_bstnk
                         and   vdatu in s_vdatu
                         and   kunnr in s_kunnr
                         and   erdat in s_erdat
                         and   ernam in s_ernam.
      if sy-subrc ne 0.
        message e000(zwave) with 'No data found for given selection'.
      endif.
    Get the data from VBAP Table
      select avbeln amatnr akdmat akwmeng a~netpr
             b~maktx into table i_vbap
             from vbap as a inner join makt as b on bmatnr = amatnr
             for all entries in i_vbak
             where a~vbeln in s_vbeln
             and   a~kdmat in s_kdmat
             and   a~abgru = space
             and   a~matnr in s_matnr
             and   a~matnr ne '000000000000009999'
             and   a~matnr ne '000000000000004444'
             and   a~matnr ne '000000000000008888'
             and   a~matnr ne '000000000000001111'
             and   a~werks = '1000'
             and   b~spras = 'E'
             and   a~vbeln = i_vbak-vbeln.
      if sy-subrc ne 0.
        message e000(zwave) with 'No data found for given selection'.
      endif.
      sort i_vbak by vbeln.
      sort i_vbap by vbeln matnr.
      loop at i_vbap.
        read table i_vbak with key vbeln = i_vbap-vbeln
                                binary search.
        if sy-subrc eq 0.
          i_sales-bstnk = i_vbak-bstnk.
          i_sales-vdatu = i_vbak-vdatu.
          i_sales-matnr = i_vbap-matnr.
          i_sales-kdmat = i_vbap-kdmat.
          i_sales-maktx = i_vbap-maktx.
          i_sales-netpr = i_vbap-netpr.
          i_sales-kwmeng = i_vbap-kwmeng.
          append i_sales.
        else.
          continue.
        endif.
        clear : i_sales,
                i_vbap,
                i_vbak.
      endloop.
      sort i_sales by vdatu bstnk matnr.
      refresh : i_vbap,
                i_vbak.
    ENDFORM.                    " get_vbak_vbap
    *&      Form  dispolay_data
          Display the data
    FORM dispolay_data.
    Fill the Fiedlcat
      PERFORM fieldcat_init  using gt_fieldcat[].
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                =
      I_BUFFER_ACTIVE                   = ' '
          I_CALLBACK_PROGRAM                = v_repid
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
          IT_FIELDCAT                       = gt_fieldcat[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_ADD_FIELDCAT                   =
      IT_HYPERLINK                      =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
      IT_EXCEPT_QINFO                   =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          T_OUTTAB                          = i_sales
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    ENDFORM.                    " dispolay_data
    *&      Form  fieldcat_init
          text
         -->P_GT_FIELDCAT[]  text
    FORM fieldcat_init USING  e01_lt_fieldcat type slis_t_fieldcat_alv.
      DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    Delivery Date
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'VDATU'.
      LS_FIELDCAT-OUTPUTLEN    = 12.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Delivery Date'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Purchase Order #Material Description
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'BSTNK'.
      LS_FIELDCAT-OUTPUTLEN    = 25.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Purchase Order #'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Material
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-REF_FIELDNAME    = 'MATNR'.
      LS_FIELDCAT-REF_TABNAME    = 'MARA'.
      LS_FIELDCAT-FIELDNAME    = 'MATNR'.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Material #'.
      ls_fieldcat-seltext_M = 'Material #'.
      ls_fieldcat-seltext_S = 'Material #'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Material Description
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'MAKTX'.
      LS_FIELDCAT-OUTPUTLEN    = 40.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Material Description'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Customer Material #
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'KDMAT'.
      LS_FIELDCAT-OUTPUTLEN    = 35.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Customer material no.'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Quantity
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'KWMENG'.
      LS_FIELDCAT-OUTPUTLEN    = 15.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Quantity'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Net Price
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'NETPR'.
      LS_FIELDCAT-OUTPUTLEN    = 15.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Net Price'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    ENDFORM.                    " fieldcat_init
    Reward Points if it is helpful
    Thanks
    Seshu

  • How to create custom cloumns in report

    Hi,
    I want to create custom columns in the reports(columns which are not present in active subject area. Please help.
    Thanks
    Arpita

    Arpita,
    You can create a calculated column using any Field (Presentation Column) in any Presentaion Table.
    Eg: You want to calculate the difference between the Start and End Date of an Activity.
    1. Simply Create a report on the Activities SA (Analytics or Real-time doe not matter here)
    2. Add the required Coumns
    3. To calculate the difference between the Start and End time.
    - add the below fields from Activity
    - Click the 'Fx' icon any field that you would like to display the calculated value in.
    - Replace the existing formula in this field with TIMESTAMPDIFF(SQL_TSI_DAY, Activity."Created Date", Activity."Completed Date") - This is your calculated value
    Activity ID     Subject     Created Date     Completed Date     Difference
    AXXX-IHJ1W     Prepare Proposal     10/31/2011 6:39:43 AM     11/18/2011 4:48:54 AM     18
    For more details, I would suggest you look at the CRM On Demand Bookshelf or click the hlp link in CRM On Demand.
    Hope this helps!
    Thanks,
    Royston

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • I have Pages 09.  I have created custom templates and want to delete them.  How do I delete a template I have created in Pages 09?

    I have Pages 09.  I have created custom templates and want to delete them.  How do I delete a template I have created in Pages 09?

    Pages stores those you created & saved as templates in (your account) > Library > Application Support > iWork > Pages > Templates > My Templates. The door to the user's Library is hidden in Lion but it is easy to open. In Finder, hold down the Option key while clicking on the Go menu & your users Library will appear about halfway down the list.

  • Is it possible to create custom bookshelves in a dedicated reader?

    Hi. I just got a Pandigital 7" Novel eReader. It's connected to Barnes & Noble and it has an Adobe eBooks app too. In the B&N library, I am able to create custom bookshelves to more easily find my books. I figured out how to transfer my ADE books from my computer to the Adobe app on my eReader, but unlike the ADE on my computer, I can't figure out how to create custom libraries/bookshelves on the eReader. The libraries from my computer did not transfer along with my books. It seems my only choices are to view the books by date of installment or alphabetized by title. Since I've transferred over a hundred books so far, scrolling through to find the one I want, every single time, is getting frustrating. To make it even more complicated, when I'm in the title view, the title of some of the books is just a series of random letters and numbers, like SW000000931.epub. I think I read on another thread this issue is impossible to fix, but if I could make my own bookshelves in the eReader, I could just name the bookshelf the title of the book.
    Am I missing something obvious, or is there no way to create custom bookshelves/libraries for ADE books in a dedicated reader?
    Thank you so much for any advice.

    You can add a button using custom javascript. but this could potentially have performance issues. please test the performance and functionality if you implement a lot javascript
    see this link : http://helponmyproject.com/TTOCOD/
    Regards,
    Royston

  • Is there a way to create custom instrument icons in GarageBand '09?

    Hello everyone!
    I am just curious if any of you might know a way to create custom instrument/track icons in GarageBand (I show an example of what I mean below)? For instance, Let's say one of the guitar tracks I've recorded was done with a Flying V and I'd like to reflect that in the instrument icon. Is that possible? If so, I'd love to know how I know it's nothing mega-important, and doesn't affect my recordings in any way, but is a great visual cue as to what that track might contain. Apple has given us some great default choices but it would be nice if we could use some of our own PNG files for this purpose too!
    Thanks for any info you may have, and have a great weekend!

    Dude thank you SO much for this! I searched and search and found no help at all, so this is an awesome find. The funny thing is I posted this question and got so busy with life in general that I had forgotten about it until just now when I fired up GarageBand LOL. Then I remembered asking this question and checked in. So glad I did because you totally hooked me up!
    THANKS AGAIN!!

  • How to create custom content placeholder in sharepoint 2013

    Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
    Thanks,
    Johnweb

    Hi,
    If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder 
    <asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
    <asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
    I suggest you provide your basic requirement for further research.
    If you want to customize a master page, the Rajendra's method would be helpful.
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Error while creating customer

    While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
    error I am getting are
    1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
    2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
    any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.

    The error is occuring because Oracle is trying to validate/set a DFF.
    Check the DFF attached to the customer entity, address entity or site use entity.
    Especially look at the value sets attached to the DFF.
    Look at the value set definition and the default value for the field.
    Hope this helps,
    Sandeep Gandhi

  • Creating Custom Validators for ADF in JDev 10.1.3.1

    Hi all,
    I'm trying to create a validator to solve a seemingly common problem - that is given 2 dates (startDate & endDate), validate that endDate cannot be earlier than startDate.
    In my case, both startDate and endDate are in the same form. From the ADF Developers Guide, the recommended approach is to create the validation method on the page's backing bean. But in my application, there are many occurrences of startDate and endDate in other forms, therefore having the validation method on the backing bean might not be the best solution.
    I tried to create my own custom validator and tying it to a tag library stated in http://java.sun.com/j2ee/1.4/docs/tutorial/doc/JSFDevelop6.html#wp999130, but that didn't seem to work either. I'm not sure if creating custom validators by extending the ValidatorTag is supported in ADF.
    Would appreciate it if someone has any suggestions on how to create the validator that I need, without having validation methods that does the same thing all over my backing beans.
    TIA.
    Regards,
    Lennard

    Hi,
    of course, ADF Faces supports custom validators because it is compliant to the JSF APIs runnting on the JSF RI.
    Another approach for validation would be on the business service level. Assuming you use ADF BC, the EO can have a method validator defined that is automatically inherited by all its views. The disadvantage though is that the error message would have to come from the server, requiring custom error message handling for user friendly messages as described in the developer guide.
    Looking forward, in a next release of ADF the binding ayer will allow more complex validations thus not requiring to handle complex validation on teh business service.
    So far however I think that using a custom validator is the best you can do. Note that in the case of ADF BC the date is of type oracle.jbo.server.domain.Date and not java.util.Date, which might be a hint to check for your validator issue
    Frank

  • Error message while creating customer.

    Hi there,
    I am trying to create customer using Tcode XD01.
    I have input the Account Group, Company Code, Sales Organisation, Distribution Chanell & Division and on pressing Enter I am getting the error message 'Sales area ITCS RS AG is not defined for customers'.
    ITCS - my sales Org
    RS - Distribution Chanell
    AG - Division.
    I have already done the assignment in SPRO and sales Area is already set up.
    Please help.
    regards,
    Subhrojit

    Hi
    Check whether u have maintained the common Distribution channel and Common Division in VOR1 and VOR 2 transaction codes.
    If not maintain the same, and also maintain S.org+Common D.Ch + Common Division.
    Regards
    Vamsi Javaji,

Maybe you are looking for