Creating data sources when database is in standby mode
Hi,
We have two oracle db in prod environment. One will always be running and the other will be in standby mode. Is it possible to create multi data source without shutting down the managed server and bringing up the standby database.
Thanks
Hi, yes. Define the DataSource to the standby DBMS with an initial capacity of zero,
so it doesn't try to make a connection until it's actually asked for one. Then
make the MultiDataSource a failover, listing the up DataSource as the first, and
the standby as the second.
Similar Messages
-
Creating new Data Source Error - Database connection Failed
Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance. -
Create a data source and database tables using WSAD
Hi, guys:
the following is from a tutorial:
http://www-106.ibm.com/developerworks/websphere/techjournal/0306_wosnick/wosnick.html
"To create the data source and Cloudscape database tables automatically, right click on the HelloWorldServer in the Servers view, and select the Create tables and data sources menu item. A dialog will then display showing that the data source and database tables were created successfully (Figure 5)."
I am using WSAD 5.0 trial version. I cannot find Create tables and data sources menu item if I right click on the HelloWorldServer in the Servers view. I am wondering if this is because trial version does not have this feature?
regardsThis question is a little off topic but you may get a reply. Please note this forum is about Sun's J2EE SDK and its related technologies. You may have better luck posting your question to an IBM specific resource.
-
Essbase Analytics Link cannot create data synchronization server database
When I try to create data synchronization server database using Essbase Analytics Link, the below error occur, anyone can help?Thnaks
dss.log:
19 Oct 2011 17:28:55] [dbmgr] ERROR: last message repeated 2 more times
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\Comma.hdf"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\PERIOD.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\VIEW.hrd"
[19 Oct 2011 17:28:55] [dbmgr] removed "C:\oracle\product\EssbaseAnalyticsLink\oem\hfm\Comma\Default\YEAR.hrd"
[19 Oct 2011 17:28:58] [dbmgr] Create metadata: "C:/oracle/product/EssbaseAnalyticsLink/oem/hfm/Comma/Default/Comma.hdf"
[19 Oct 2011 17:28:59] [dbmgr] WARN : HR#03826: Directory "C:\oracle\product\EssbaseAnalyticsLink/Work/XOD/backUp_2" not found. Trying to create
[19 Oct 2011 17:29:15] [dbmgr] ERROR: ODBC: HR#01465: error in calling SQLDriverConnect ([Microsoft][ODBC SQL Server Driver][Shared Memory]Invalid connection. [state=08001 code=14]).
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00364: Cannot open source reader for "ACCOUNT"
[19 Oct 2011 17:29:15] [dbmgr] ERROR: HR#00627: Cannot create dimension: "ACCOUNT".
[19 Oct 2011 17:29:16] [dbmgr] ERROR: HR#07722: Cube 'main_cube' of application 'Comma' is not registered.
eal.log:
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readYear&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:56] http://localhost/livelink/Default.aspx?command=readPeriod&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=readView&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:57] http://localhost/livelink/Default.aspx?command=getVersion&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:28:58] DSS Application created
[2011-Oct-19 17:28:58] http://localhost/livelink/Default.aspx?command=getICPWeight&server=TestEss64&application=Comma&domain=
[2011-Oct-19 17:29:15] (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15] com.hyperroll.jhrapi.JhrapiException: (-6981) HR#07772: cannot register HDF
[2011-Oct-19 17:29:15] at com.hyperroll.jhrapi.JhrapiImpl.updateMetadata(Native Method)
[2011-Oct-19 17:29:15] at com.hyperroll.jhrapi.Application.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.HyperRollProcess.updateMetadata(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManagerImpl.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15] at com.hyperroll.hfm2ess.bridge.ws.BridgeOperationManager.createAggServerApp(Unknown Source)
[2011-Oct-19 17:29:15] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[2011-Oct-19 17:29:15] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[2011-Oct-19 17:29:15] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[2011-Oct-19 17:29:15] at java.lang.reflect.Method.invoke(Method.java:597)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
[2011-Oct-19 17:29:15] at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:140)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:171)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
[2011-Oct-19 17:29:15] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
[2011-Oct-19 17:29:15] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
[2011-Oct-19 17:29:15] at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
[2011-Oct-19 17:29:15] at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:98)
[2011-Oct-19 17:29:15] at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
[2011-Oct-19 17:29:15] at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
[2011-Oct-19 17:29:15] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
[2011-Oct-19 17:29:15] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
[2011-Oct-19 17:29:15] at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
[2011-Oct-19 17:29:15] at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
[2011-Oct-19 17:29:15] at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2011-Oct-19 17:29:15] LiveLinkException [HR#09746]: Data Synchronization Server database cannot be createdWhat version of EAL have you installed, what OS + 32bit/64bit are you installing it on.
What version of the OUI did you use.
Have you gone through all the configuration steps successfully.
Cheers
John
http://john-goodwin.blogspot.com/ -
About creating data source(urgent)
Hi,
I am abap developer. i don't know much about crm.
our requirement is :
i need to create one infoset in sap r/3.
we want to use that infoset in crm server to create data source.
we use transaction code : CRMD_MKTDS
We specify these values.
Origin Type
RFC Destination
InfoSet
Description
businee pastner
But we are not getting any infoset from r/3 server.
we are getting only crm infoset.
I check RFC Destination. Its working fine.
It gives me error : InfoSet ztest either does not exist or has not yet been generated
Thanks,
JackHi,
You can get the data using a db link and the proc is as follows..
CREATE DATABASE LINK OTHERDATABASE ...;
CREATE TABLE XXXX
AS
SELECT * FROM TBL@OTHERDATABASE ;
Good Luck,
Siva -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
Create data source in BI 7.0?
hi,
while creating data source in BI 7.0 , ( from flat file data)
under extraction tab:
character set settings : default and direct entry is there
if i select direct entry i am getting character set and replacement character.
what scenerio we use direct entry and what scenerio we use default. if i select direct entry what is effect for my output.
please clarify.
regards
ss<b>System Default or Fixed Entry</b>
If you choose <b>Default Setting</b> for the character set, in Unicode systems a file in UTF-8 format is expected, in non-Unicode systems a file in the format of the system code page is expected.
If you choose <b>Direct Input</b> for the character set, you can select an SAP character set and determine a replacement character, in case errors occur while converting to the system character set.
<b>SAP Character Set ID</b>
The 4-character name of an SAP character set as defined in SAP character set maintenance.
The following explains the naming convention in more detail:
First digit: Code
0 EBCDIC character sets
1 ASCII character sets
2 mixed single byte / double byte character sets
4 double-byte character sets
6 mixed character sets
8 double byte and multibyte character sets
9 reserved for code pages you define
Second digit: Country
1-3 countries that use the Latin alphabet (Western Europe, North and South America, Australia, Africa)
4-6 countries that use non-Latin alphabets and writing systems (Eastern Europe, Asia, Arabic countries in Africa)
7-9 reserved for special languages
Third and fourth digits: Sequential number
Example
0100 IBM 00697/00273 (Latin 1 - Germany/Austria)
0401 SNI BS2000 8859-5 EHCLC (cyrillic - multiple languages) -
Not enough memory for Data Provider-Error while creating Data Source
Hi,
I am loading data into Master Data_Attribute InfoObject I am getting following error message while creating Data Source under "Proposal" Tab
"Not enough memory for Data Provider"
My Master Data InfoObject having 65 attributes
My CSV file having 15,00000 records
I am using BI 7.0 version
If anybody faced this problem. Please share with me
Thanks.Hi
Here the problem with the space so plz contact ur BASIS people to increase the spae for particular object. -
Can we set the dynamic data source when using getReportParameters() ?
Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephaniereport_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem -
Change PowerPivot data source when deploying from Dev - Staging - Production
We have PowerPivot workbooks we store in SharePoint 2013 Libraries.
We have a powershell script which automates the deployment of sites and pages. Is there a way using PowerShell (or any scripting language really) to look into the workbook and change the PowerPivot data source when deployment from one environment to
another? (Dev -> Stage -> Prod) We need to update the workbooks to point to our SSAS cubes Dev -> Stage -> Prod respectively.
Thank you for any expert advice you may offer,
Sincerely,
-CraigBasically, it's an excel file (XLSX) file and you can use excel OM for this.
A simple program (in C# or any language of your choice) can be written to do the following and achieve what you need.
using XLS = Microsoft.Office.Interop.Excel;
string info = null;
XLS.Application application = null;
try
application = new XLS.Application();
var book = application.Workbooks.Open(filepath);
foreach (XLS.WorkbookConnection wc in book.Connections)
switch (wc.Type)
case XLS.XlConnectionType.xlConnectionTypeOLEDB:
info = wc.Name + " " + wc.OLEDBConnection.Connection.ToString() + "\r\n";
break;
book.Close();
finally
if (application != null)
application.Quit();
Hopefully, this was helpful. -
Create Data Source Module using OMB
I am not seeing how to create Data Source modules using OMB. I am assuming there is a property of OMBCREATE ORACLE_MODULE that I am overlooking. If anyone can provide assistance, it would be greatly appreciated.
Thanks,
craigHi,
Yes, there is a OMBCREATE command for creating Oracle Modules. And as per the Scripting ref Guide ( Page 4-157 owb 9i scripting guide) -
OMBCREATE ORACLE_MODULE 'src_module' SET PROPERTIES (DESCRIPTION, BUSINESS_NAME) VALUES ('this is an Oracle module', 'source module') This will create an Oracle module named "src_module", its description is "this is an Oracle module", and business name is "source module".
HTH
Mahesh -
Newbie Question: Creating Data Sources
Our current Hyperion setup consists of the Hyperion 9.3 client that users access via a terminal server. We are trying to get the web version of Hyperion running.
I installed some base components of the Oracle Enterprise Performance Management System (11.1.1.2.0.940). It all starts fine and I can login with admin, but I do not see how to create data sources or load .bqy query files. If I create a new interactive reporting document, it makes me choose a Data Source from the virtual directory in which I do not have one. if I try to import one, or import a .bqy file, I browse to the file, select it, then always get a "File path is wrong." error. I also found how to create Data Sources using the CMC, but I do not see how to reference these. What am I doing wrong?.HI,
What version of Hyperion planning are you using version 9.3 or epm11.1?
Because they have different ways of creating datasources.
In version 9.3 you can create datsource in the configuration utility.
While in version 11 you need to create planning application first before creating datasource either by classince planning application or epm.
Thanks,
Hanson -
HOW TO CREATE DATA SOURCE FOR MAXDB
hi,
i am using hibernate in NetWeaver with maxdb.
i have to give datasource name in hibernate.cfg.xml
but i do't know how to create datasource for maxdb.
please help me.
Thanqqqqqqqq
GuruThe following link gives u how to create data source
http://dev.mysql.com/doc/maxdb/en/84/1d733cefd63c38e10000000a114084/content.htm -
Create Data Source for hierarchy
Hi all,
Can any one tell me how to create Data Source for hierarchy for the object (for example 0MATL_GROUP)?
Kindly Help,
Thanks
Laura GómezHi Laura
with BI7 this feature is not yet supported. Try with 3x datasource
Maybe you are looking for
-
How can someone create an account/register on my website?
Hello! I'm somewhat new to Muse so I apologize if this question has already been asked. I wanted to create a link where someone can register/create an account on my page so that they will have the ability to have their own personal page when they log
-
How do I do a clean install of Snow Leopard on a mid 2010 13" MacBook Pro
Hello All, I am replacing a dead hard drive without any backups (I'm fixing someone else's computer), so I want to do a clean install. When I boot the retail Snow Leopard DVD, I get a kernel panic. Is this the wrong DVD? I don't have the original
-
Export a whole project from a computer to another
Hi everyone! I use Adobe Premiere pro CC7 and would like to export a Video montage project from a Macbook to a Windows computer and inversely. Do you know if it's possible, and how? Thank you!
-
Converting info message into error message hardcoded in a standard program.
Hi all, Due to some Good Manufacturing Practices in the Pharmaceutical Industry, users are demanding that message i102(40) (SAPLCOSD / LCOSDF2D / FORM OrderTables_Fill line 478) a hardcoded info message be converted into an error message. I have stru
-
My iPhone 4 worked fine last night. When I woke up this morning, it had shut off and will not turn back on. I looked up the HOME+SLEEP key solutions, but my home button does not work. Any suggestions?