Creating Date Prompts with "in between" operator

hi,
I have gone through the below forum
http://oraclebizint.wordpress.com/2008/02/26/oracle-bi-ee-101332-between-prompts-for-date-columns-using-presentation-variables/
I have done all the steps as shown in the forum but I used calendar control instead of drop down list and it displayed the following error:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46047] Datetime value 4/4/1998 12:00:00 AM000000000 from 4/4/1998 12:00:00 AM000000000 does not match the specified format. (HY000)
Can anyone suggest me an appropriate solution as it is my project requirement.
thanks in advance
naresh

Hi,
I cast the date column AS DATE again it displays the following error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46046] Datetime value 4/2/1998 does not match the specified format. (HY000)
How to cast date column to timestamp (ddmm-yyyy 24hr:00:00) format
Thanks in advance
naresh

Similar Messages

Date prompt with a between statement

Can a dashboard support a date range prompt? We are trying to make a prompt and use a between statement. Suggestions?

I think you are using the prompt from the Prompt tab in Answers. What you need to do is use Dashboard prompts.
Although Dashboard prompts have a "between" operator," if you use the 'between" operator, the ability to save the selections to Presentation Variables (PVs) disappears. When I need a "between" dates type prompts, I do the following:
1) Create two Dashboard prompts set to PVs, say StartDate and EndDate. (In the Edit Formula area, use a CASE stmt on the column chosen -- doesn't matter what the column is -- so no action is performed on the column) (e.g., CASE WHEN 1=0 THEN ColumnName.TableName ELSE 'TEST' END)
2) Change control to "Edit Box" so users can input the dates. (If you select two appropriate date columns, you can use the "Drop-down List" option and have the user select a valid date. In that case, you wouldn't use the CASE statement in step 1.)
2) In your report, filter on the date column, convert the filter to SQL, and type in the following:
+"Column name"."Table Name"+ BETWEEN '@{StartDate}' AND '@{uEndDate}'
3) Place both the prompts and the report on a dashboard and when a start and end date is selected, the "between" function is performed on the report.
HTH,
Edited by: LC143 on Sep 3, 2008 9:52 AM

How create data store with PermSize = 4096MB on HP-UX 64-bit?

Hi!
I use TimesTen 7.0.2:
TimesTen Release 7.0.2.0.0 (64 bit HPUX/IPF) (tt70_1:17001) 2007-05-02T05:22:15Z
Instance admin: root
Instance home directory: /opt/TimesTen/tt70_1
Daemon home directory: /var/TimesTen/tt70_1
Access control enabled.
I set PermSize = 4096MB for my new data store. Then I tryid to create it:
ttIsql -connStr "DSN=tt_rddb1;UID=ttsys;PWD=ttsys;OraclePWD=ttsys;Overwrite=1" -e "exit;"
But operation was failed:
836: Cannot create data store shared-memory segment, error 22.
Can I create data store with such size on HP-UX 64-bit???

Is largefiles enabled? I believe you can check with fsadm -F vxfs /filesystem
Also please understand that 'PermSize' is not the only attribute affecting the size of the timesten shared memory segment. The actual resulting size is
PermSize + TempSize + LogBuffSize + Overhead
So you would need to configure shmmax to be > 4g. Have you tried setting it to (say) 8g (just for testing purposes to see if it eliminates the error).

Creating Data Server with DB2

Hello Experts,
I am creating data servers with database DB2 in xMII 12.1
This is the details:
Connector : IDBC
Connector type : SQL
JDBC driver : com.inet.tds.TdsDriver
Server Package : com.sap.xmii.Illuminator.connectors.IDBC
Server Url : jdbc:inetdae:BGC125:5912?database=MD1&sql7=true
When I am checking the status, it is coming stopped
I had checked in NWA, and JDBC driver is green.
Please help me on that.
Regards,
Dipak

Thanks for the quick reply John. I am trying to get user and group information, and also doing some complex manipulation. I need this to verify user access and some other stuff. I will not always have access to HSS and cannot always export the information, thus the need to use the HSS java API.
I'm trying to pull it out of HSS and put it into an Oracle table in a standard format where I'll use the information and do reporting off of it. I've developed a java class that does migrates the data over, but its crude and I'd like to move it into ODI with some of our projects that are currently doing the same thing with other ERP such as Ebiz and Peoplesoft.
If I can recode some of the java in ODI, how would I go about doing that. Where would I include the libraries, etc.? is there a tutorial or a place where I can get started on that.
Thanks for all the help.

How create data store with PermSize 512MB on WIN32?

Hi!
How create data store with PermSize > 512MB on WIN32? If I set PermSize > 512MB on WIN32, then data store becomes invalid.

Thanks for the details. As I mentioned, due to issues with the way Windows manages memory and address space it is generally not possible to create a datastore larger than around 700 Mb on WIN32. Sometimes you may be lucky and get close to 1 GB but usually not. The issue is as follows; on Windows, a TimesTen datastore is a shared mapping created from memory backed by the paging file. This shared mapping must be mapped into the process address space as a contiguous range of addresses. So, if you have a 1 GB datastore then your process needs to have a contiguous 1 GB range of addresses free in order to be able to connect to (map) the datastore. Unfortunately the default behaviour of Windows is to map DLLs into a process address space all over the place and any process that uses any significant number of DLLs is very unlikely to have a contiguous free address range larger than 500-700 Mb.
This problem does not exist with other O/S such as Unix or Linux nor does it exist with 64-bit Windows. So, if you need to use a cache or datastore larger than around 700 Mb you need to use either 64-it Windows or another O/S. Note that even on 32-bit Linux/Unix TimesTen datastores are limited to a maximum size of 2 GB. If you need more than 2 GB you need to use a 64-bit O/S.
Chris

How to create two prompts with same named object?

Hi to All,
I am a new user of OBIEE. Actually have only one column called creation date in my report. My requirement is in dashboard, I need to display two text boxes in same prompt with the name Beginning creation date and Ending Creation Date. Actually, I was able to do it with the operator "Between" but when i am doing it, I was not able to determine how can we get the values entered by the user for beginning date and ending date because both dates will get stored in the same prompt only (ie) in my "Creation date" prompt.
Also, I have an another question, In a single prompt I need to repeat the same object more than once. But When I tried it shows the error "same column exists.. so this action will be ignored". Please help.
Thanks in Advance,
Thenmozhi

Thenmozhi,
You can think about having 2 different prompts: the first one with the operator >= and the second <=.
For your second question you cannot have the same column in the same prompt more then once
Regards
Adil
PS:Please assign points and close the thread when your question is answered

How to create Date relationship with Fact and DimDate on Tabular model?

I have two tables in SQL Server 2014 SSAS Tabular model.
DimDate(defined as data table) have date column (format is 1.7.2010 00:00:00) This table have been impoted from AdventureWorks.
FactSales have SalesDate column (format is 25.03.2015 18:08:05). This table have been imported from Excel. Colums is defined as date in Excel.
When I set Data Type as date in Tabular I get error:
"Datatype conversion failed for table...Value:'25.03.2015 18:08:05'"
I have tried to create calculated colums like =DATEVALUE([SalesDate]) and =DATE(YEAR([SalesDate]),MONTH([SalesDate]), DAY([SalesDate])), but getting error.
What should I do so that I can create relationship between Date column?
Kenny_I

Hi Kenny_l,
According to your description, you fail to convert the data type into date after creating calculated column with expression. Right?
In Analysis Services, the tabular will detect the source data type to determine which data type can be converted to. If you want to convert a data into date type, no matter this data is from database or a file, you must make sure this data can be recognized
as a date in SQL Server. In this scenario, the format '25.03.2015 18:08:05' can't be recognized as date even you apply DAX functions. So please change the format of the column in excel like "03.25.2015 18:08:05".
PS: For testing, you can create a temp table and insert sample text into a date column, because the date format in SQL Server depends on the location selection when installing.
After retrieving data from data source and all values within column are correct format, you can change the data type into Date, and select the format you expect.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Create DATA ELEMENT with passing Parameter

Dear All,
When we create the Data elementt in tcode SE61, normally we will write the text inside the text area. How about can we pass the paramater to the data element in tcode SE61 ?
Example i pass the parameter with the text "Tesing 123" , so the Data element will display Testing 123 when being called. The text flexible.
Thank

Hello
I want to use TPLNR to create data element in Operating Concern but I am not able to because of length of TPLNR (30) in Operating Concern we can create data element only upto 18 char. If i want to create new data element YTPLNR.
I did following steps
1. SE11
2. Data Element
3. and settings of particular data element what ever is required.
My question is how can I use YTPLNR as characteristic as same value of TPLNR. I want all data that is available in TPLNR. I am creating new element because of data length issue.
Table: IFLOT has data element TPLNR. I want all information of TPLNR in YTPLNR how it is possible to use that info in that.
I tried to create user defined characteristics for operating concern
i want to use with reference to existing value option in user define
How can I do that
thank you

Problem to create data source with OCI type of driver

Hi Experts
We are creating an XA datasource with OCI type of driver using an enterprise application with data-sources.xml, the xml is like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE data-sources SYSTEM "data-sources.dtd" >
<data-sources>
 <data-source>
 <data-source-name>OCI_DS_XA</data-source-name>
 <driver-name>ORACLE_DRIVER</driver-name>
 <init-connections>1</init-connections>
 <max-connections>25</max-connections>
 <max-time-to-wait-connection>120</max-time-to-wait-connection>
 <expiration-control>
 <connection-lifetime>60</connection-lifetime>
 <run-cleanup-thread>300</run-cleanup-thread>
 </expiration-control>
 <sql-engine>Vendor_SQL</sql-engine>
 <jdbc-2.0>
 <xads-class-name>
 oracle.jdbc.xa.client.OracleXADataSource
 </xads-class-name>
 <object-factory>
 oracle.jdbc.pool.OracleDataSourceFactory
 </object-factory>
 <properties>
 <property>
 <property-name>serverName</property-name>
 <property-value><SERVER_NAME></property-value>
 </property>
 <property>
 <property-name>serverPort</property-name>
 <property-value>1521</property-value>
 </property>
 <property>
 <property-name>databaseName</property-name>
 <property-value>ORCL</property-value>
 </property>
 <property>
 <property-name>driverType</property-name>
 <property-value>oci</property-value>
 </property>
 <property>
 <property-name>user</property-name>
 <property-value>username</property-value>
 </property>
 <property>
 <property-name>password</property-name>
 <property-value>password</property-value>
 </property>
 </properties>
 </jdbc-2.0>
 </data-source>
</data-sources>
We have installed oracle client in server M/C and configured all the environment variables. While we are deploying the application from CE developer studio IDE to the CE 7.1 AS, we are getting the following error:
Description:
 1. Exception has been returned while the 'sap.com/DS_TEST_EAR' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
 com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 7653550:com.sap.engine.services.dbpool.exceptions.BaseDeploymentException: Cannot create DataSource "OCI_DS_XA".
 at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1467)
 at com.sap.engine.services.dbpool.deploy.ContainerImpl.prepareStart(ContainerImpl.java:468)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepareCommon(StartTransaction.java:219)
 at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:179)
 at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:419)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesImpl(ParallelAdapter.java:495)
 at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:554)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:248)
 at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:389)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3387)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3373)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3276)
 at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3249)
 at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
 at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
 at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
 at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
 at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
 at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
 at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
 at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
 at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
 at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
 at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
 at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
 at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.frame.core.database.DatabaseException: Exception of type java.sql.SQLException occurred: Closed Connection.
 at com.sap.engine.core.database.impl.DataSourceAdministratorImpl.createDataSource(DataSourceAdministratorImpl.java:49)
 at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSources(ContainerImpl.java:1400)
 ... 33 more
Caused by: java.sql.SQLException: Closed Connection
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227)
 at oracle.jdbc.driver.GetCharSetError.processError(T2CConnection.java:3082)
 at oracle.jdbc.driver.T2CConnection.getCharSetIds(T2CConnection.java:2811)
 at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:300)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:344)
 at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:136)
 at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:79)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:545)
 at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:194)
 at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:121)
 at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:333)
 at oracle.jdbc.xa.client.OracleXADataSource.getXAConnection(OracleXADataSource.java:84)
 at com.sap.sql.connect.factory.XADSPooledConnectionFactory.getPooledConnection(XADSPooledConnectionFactory.java:27)
 at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
 at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.initConnections(DBDataSourcePoolImpl.java:1099)
 at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.<init>(DBDataSourcePoolImpl.java:49)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:507)
 at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:136)
 at com.sap.sql.manager.OpenSQLManager.createDataSource(OpenSQLManager.java:141)
 at com.sap.engine.core.database.impl.DataSourceAdministratorImpl.createDataSource(DataSourceAdministratorImpl.java:42)
 ... 34 more
But when we are creating the datasource with thin type of driver, it is working fine. We have already created a driver with name ORACLE_DRIVER in server using the ojdbc14.jar using Netweaver administrator consol.
Same this is happening when we are creating the OCI type of datasource by using Netweaver administrator consol by specifying all the parameter as above and also the initial connection pool size is more than zero.
Same thing is happening for normal (JDBC 1x) datasource creation with OCI type driver.

Hello,
I ran a search on SDN, related to your error code, i found the following:
UnsupportedClassVersionError in NWDS CE
DeploymentWarning-WebService-Collection
Maybe its useful to you
Regards,
Siddhesh

How to create a prompt with default value as current_date?

Hello
I'd like to create a prompt on the dashboard that has current_date as the default value. Is it possible to achieve so?
Please provide any pointers..
Thank you

Unfortunately, no. Presentation variables are declared in a dashboard prompt (see page 44 of this link http://download.oracle.com/docs/cd/B40078_02/doc/bi.1013/b31767.pdf)
Any other type of workaround would not be worth the trouble of asking the developers to create the variable for you. One note, the current date may very well already be defined and just not known to you. Can you ask your developer if he/she has a variable that contains the current date or how long it would take to create one for you?
As a whole, it would be nice to have a set of "date" repository variables if you run Requests based on common date ranges (e.g., first day of current month, last day of current month, first day of quarter, last day of quarter, most recent end-of-year date, etc.) These can be very useful in automating reports so they don't require prompts. Of course, it depends on your organization and what you use OBIEE for...
We have built many such variables and it has been very valuable to the users and report builders. Just a thought...

How to create date variable with interval in VC

Hi Everyone,
I have 2 questions:
My scenario:
I am using a BI 7.0 Query which is having some variables. I want the same variables to be displayed in the VC output.
Question 1:
I know that how to bring these variables in variable screen, but when we use these queries, dont the variables in the variable screen automatically ask for the input?
I tried it but it is not happening automatically.
There are 2 inputs for queries with variables, i tried using both, but it is not working properly. Can any one tell me is it possible.
Question 2:
In this variable screen, I have to select date with interval format. but i dont know how to use variable with interval. ( Date with interval format).
I hope some one might have come across the same scenario .. If so please share with the solution me ..
Regards,
Chan

Ok .. Let me be very clear .. I think I confused you.
As you mentioned I have done every thing in query level.
I have created a query with a variable which is an interval based variable(date).
When I execute the query it asks for the dates to display the inbetween data.
I gave the inputs and the data is displayed properly.( So far what I have mentioned is all in Query designer).
In VC, I have used this query and it is having two ports named INPUT and VARIABLE. I know that I need to give input in variables. I selected the calander month variable from the list to display. After this I deployed the model. In the output screen the table is displayed and 1 text box is also available for the date input. I know that here I have to give date with same format as in Query designer output. I tried so many ways to give input by even selecting some other options like date picker but it is giving the following error - Variable expects interval values; enter an interval.
The date format which I m using in Query is "MM.YYYY" and I m using the same format in VC too.
Now I hope that u can understand better.
I want to know is there any other way through which this can enter interval value or what mistake I m doing in the above explained scenario?
Regards,
Chan

LabVIEW created .DAT file with saving only new data on existing files

I can successfully create and save a .DAT file using LabView and Diadem. The save command I am using (in Labview) only overwrites existing files, I would like it to save only the new data from the last save. Overall I would like to save the data every 1hr and since my test will last for many hours, the further along in the test the longer it would take to save the full file. I know Diadem has the capability to save in such a manner, so I have thought about after I write to Diadem have a small Diadem application save periodically, but I haven't found a way to save the .DAT file, with out any signals coming into the save function. I have attached the example .DAT file creater and saver I am using to figure it out. thanks for your help!

Howdy New Guy -
I am not sure if you are looking to append to a file, or if you would
like to overwrite a file. In either case, you can take a look at
the "Append To File.vi" example for DIAdem.
Either way, you may be experiencing problems because you are only using
the "DIAdem Simple File Write.vi" (found on the DIAdem >> DAT
Files palette). Instead, you can use the "DIAdem File Write.vi"
(located on teh DIAdem >> DAT Files >> DAT Files Advanced
palette). This VI can be set to overwrite or append to file.
I hope this helps in your development!
Andrew W. || Applications Engineer

Cannot Create Data Repository with VM Server (3.1.1) Cluster

Dear All,
I have 3 Servers (one for VM Manager, two for VM Servers) and 1 Storage (Sun Storage 6180 (Fiber Chanel) and map volume as Default Storage Domain ).
I try to create my 2 VM Servers as Cluster on VM Manager but it has problem as below:
Case1. I can create a Server Pool with cluster by select Clustered Server Pool by select physical disk, add 2 servers then create data repository but it got problem: in page Create a Data Repository: Select Physical Disk is shown blank not see a physical disk.
Case 2. when I create server pool by uncheck Clustered Server Pool box (None Cluster) and add 2 vm servers then create data repository, the physical disk is shown but got error message:
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS vmserver1. Its server is not in a cluster
Wed Dec 26 01:27:12 ICT 2012"
Please kindly give advice for this.
Thanks and regards,
Vandy

1. So you're trying to create a server pool and a storage repository on a single LUN that is direct attached? Don't your software on the 6180 allow you present multiple LUNS from disk group? Think about it. You create a clustered server pool on a single LUN and then try to use that same LUN for repository.....
2. How are both hosts attached? Are there multiple HBA cards in your 6180? Is so, how many? If you have redundant cards you should be using multipathing for redundancy.

Create data buffer with arrays

Hello.. I'm trying to create a data buffer but I can't...(I don't understand very well how to use the shift registers, feedback, auto-index, etc.) I receive real-data from 16 sources and I want the buffer to allocate 20 samples or so... (20 x 16 matrix or array). I'm trying to simulate the sources and using replace array subset, but I can't do what I want.. (that a single data fill the space in index 0, and when a value reaches index 19, the next number replace the one in index 0 and so on....)
I want to create a buffer for when some disturbance ocurrs, I want to save the data from 1 or 2 seconds before the event. I think that I can use too a history data property node, but I'm not using a waveform chart anymore, because I want also the time stamp of the data in the xscale.. and with the chart I didn't manage to do it... (I tried with an offset property node.. but eventually the time in the xscale lagged the real time, I think that happens because the rate sample is not constant... but that's another problem.. =S)
Thanks in advance for all your help... Mitzi
PS. I attach my attempt...
Attachments:
buffer_qst.vi ‏20 KB

If you want a build a 20x16 array with only the 20 most recent values, what you can do is use the build array function to concatenate on the end of the data (you will need a shift register for this).
Next take the output of the build array and get the last 20 columns using the array subset function.
(There's a real clever way to do this involving reversing the arrays, but I'm not going to confuse you with that).
If you're still not getting it when I get home, I'll write up a VI and post it. What version are you using?
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Error when i create a subconsult with dblink between 3 instances.

Hi,
I have 3 instances and i want to work between then. The error ocurrs when i use subquery, This is the code:
update erie.rie_cbtrega@l$e_tfcries rgr
set rgr.c_descri = ( select rg.c_descri
from dadm.cbtrega@l$e_tfccie rg
where rg.c_idrega = rgr.c_idrega
When i execute upadte without subquery "( select rg.c_descri from dadm.cbtrega@l$e_tfccie rg where rg.c_idrega = rgr.c_idrega)" the result is successfully, but when i add subquery the result is
ORA-02019: no se ha encontrado la descripción de la conexión para la base de datos remota
ORA-02063: line precediendo a TFCCIE
ORA-02063: 2 lines precediendo a L$E_TFCRIES
Regards.

Hello,
you have chosen the wrong forum, because your problem has nothing to do with Advanced Queueing.
You have to check, if the DB link "l$e_tfccie" does exist and you have the rights to access it
(it would be helpful if you could paste english error messages instead of spanish ones).
Kind regards,
WoG

Creating Date Prompts with "in between" operator

Similar Messages

Maybe you are looking for