Creating die lines in CS3

Does anyone know of a Plug In for any of the CS3 products that will create a die line for packaging. I have seen a product for MAC, but none for PC.

1. Yes
2. Yes one shape is preferred. Often dies from Autocad do not have the paths conneceted and we have to connect them.
4. No the fold lines do not have to go on a seperate layer, use a global color for folds (also bleed & trim). If someone wants the folds on a separate layer , they can select the strokes fo similar color and easily do that.
Make sure use preview bounds is off, or else your stroke thickness will be calculated into your sizes in the tranform palette, and throw your die off by half the thickness of your stroke. .5pt is often preferred for die line thickness, unless large scale itmes can go to 1 pt.

Similar Messages

Creating die lines in illustrator

I have been doing some research on creating die lines in illy but I have some unanswered questions: (using a standard box as an example)
1. If I want to indicate a fold (dotted line) at the base of a tab, do I create a dotted stroke across the fold, leaving an open path with the end anchor points overlapping the shape of the tab at the base?
2. Is the die line for a basic box one shape (closed path) with fold line strokes (open paths) overlapping the shape? Or are packages made from a bunch of different shapes (individual closed paths) all touching each other (overlapping sides) where each shape would be a section of the box?
4. Do the fold lines go on a separate layer from the cut lines?
I haven't been able to find a tutorial to create the die line from scratch by just going off measurements, so my questions are in regards to using the pen tool and shapes to get to the final image of the die.
Thanks!

1. Yes
2. Yes one shape is preferred. Often dies from Autocad do not have the paths conneceted and we have to connect them.
4. No the fold lines do not have to go on a seperate layer, use a global color for folds (also bleed & trim). If someone wants the folds on a separate layer , they can select the strokes fo similar color and easily do that.
Make sure use preview bounds is off, or else your stroke thickness will be calculated into your sizes in the tranform palette, and throw your die off by half the thickness of your stroke. .5pt is often preferred for die line thickness, unless large scale itmes can go to 1 pt.

Unable to create Schedule line(Maintain sch.agreement)

Hi experts,
After running MRP i got Planned order for a certain material and for that material procurement type maintained as "Both internal and external" in material master. After completing the process planned order to purchase requisition, i separately created schedule agreement . Now here i am facing one problem that if i create schedule line with reference to purchase requsition i am getting the error Requisition doc. type NB not allowed with doc.type LP.
pls anybody suggest is there any prob made in the above process
Regs,
SR
Edited by: SP Ramesh on Jan 1, 2010 8:22 AM

go to tcode OLME> schedule agreement> select the line of document type LP and then slecte the folled item category and then selce each item category one by one and then click on the second folders link document type and there give source document type NB
cause of the issue is : the source document type NB is not set with LP document type of schedule agreement

CRXI Export to text - suppressed section creates blank lines

I'm using CRXI Proffesional - full version 11.5.11.1470
I have a report that uses the typical "stealth" subreport to obtain and pass info to the container, but remains invisible in preview mode. The fields in the subreport are all suppressed, the sections in the subreport are suppressed if blank and the subreport itself is suppressed when blank, the section that contains the subreport is also suppressed if blank.
This has always worked fine to get info into the container from the subreport while not creating any "white space" on the report.
Print preview and export to pdf both function just fine, omitting the blank lines.
It seems that exporting this to a text file is now creating blank lines for each occurence of the subreport.
I have seen this problem in a couple of forums but have not seen a resolution yet.
Does anybody have any idea how I can stop the exporting of suppressed blank sections ?

Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek

Creating a GIF using CS3

I am trying to create a GIF using CS3. I have read the discussions on Adobe but I get to a stage in the instructions and it is not working for me. I have 6 jpeg photos, and i bring them all into one. All photos are named different. After reading the forums, the next step is FILE>SAVEAS. Next, you select COMPUSERVE.gif. Once I select that, I have no idea where to go. It would be much appreciated if someone could help me out. Thanks
PS Sorry about the picture quality.

Here are some basic steps, but i would go Image>Image Size and reduce the size (pixel dimensions) of your document first.
http://www.megandowntherabbithole.com/2012/10/how-to-create-an-animated-gif-in-adobe-photo shop-cs3-tutorial/

Using Select all to create multiple lines in a sales order

Hello SAP experts,
In our business practice users create multiple line sales orders with reference to contracts and use the copy paste method and then assign each line to the contract manually.
After a few years of this practice i found a new way to create multiple lines but it doesn't quite work correctly. When you have created the first line of an order if you click on the select all button the system will ask you how many lines do you want to copy. I don't know if this is standard SAP but 3 things don't happen when we use this 1) The schedule line information is blank 2) conditions do not copy from the contract even though the contract has been referenced. 3) Since there is no schedule line information the order fails when saving and we get a update terminated message.
I am having problems finding any documentation around this function so any help with this would be greatly appreciated.
error when updating is
Transaction..   VA01
Update key...   4D358878A8B601AAE10080000A2C4982
Generated....   28.01.2011, 13:47:23
Completed....   28.01.2011, 13:47:23
Error Info...   00 671: ABAP/4 processor: GETWA_NOT_ASSIGNED

GETWA_NOT_ASSIGNED
Many threads are there on this error message and you would come to know if you google with this text. Check couple of threads where the same topic was discussed
[Re: GETWA_NOT_ASSIGNED|Re: GETWA_NOT_ASSIGNED;
[Re: GETWA_NOT_ASSIGNED ABAP Dump|GETWA_NOT_ASSIGNED ABAP Dump;
Also there are some 20 OSS notes on this error message and you can have a look at the following notes:-
1)   Note 913679 - VA01: Short Dump GETWA_NOT_ASSIGNED on click of quantity.
2)   Note 591955 - ABAP runtime error GETWA_NOT_ASSIGNED
3)   Note 870670 - SD_SALES_DOCU_MAINTAIN_DIALOG termination with GETWA_NOT_***
4)   Note 141314 - VA02: Dump with 'GETWA_NOT_ASSIGNED'
thanks
G. Lakshmipathi

Creating Schedule lines in Scheduling agreement using LSMW

Hi,
I want to upload multiple schedule lines in scheduling agreement using LSMW. I have done the recording and maintained multiple lines in input file. However during execution LSMW creates only one line and keeps on ovewritting the same line. Please let me know how can I create multiple schedule lines.
Regards

First you should search for existing standard LSMW migration objects that possibly cover your scenario. These normally take care of complex header / multiple items / multiple subitems relations.
With a recording you can only load flat structures. Sometimes a "create new lines" / "enter first line" / "save transaction" logic can be constructed to load multiple items to a header (or even subitems to an item?) with a recording, but this can be pretty awkward.
Thomas

MRP does not creates Shcedule Line

I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key          NETCH               Net Change in Total Horizon
Create purchase req.    3                   Planned orders
Delivery schedules      3                   Schedule lines
Create MRP list         1                   MRP list
Planning mode           3                   Delete and recreate planning data
Scheduling              2                   Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PP

Hi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check

How can I create a line break in pages for iPad?

On the Mac you can hold the shift key while pressing the return key to creat a line break. Only pressing the return key will creat a new paragraph of course.
On the iPad you only can creat paragraphs. Pressing the shif key does not change that.
Does anybody know how to force a linebrek on the pages app for iPad?

Tap and hold where you wish to insert the line break. Select Insert from the pop up menu, then Line break.
this might be helpful for future reference: http://help.apple.com/pages/ipad/1.7/

How to create a line type in data dictionary

How to create a line type in data dictionary?Please explain step by step?
Thanks & Regads,
Sairam

Hi,
the details abbout the line type.
The line type of a table type can be defined by:
o Specification of a type that already exists (data element,
structure, table type, table, view) whose properties are then copie
as properties of the defined table line.
o Direct type input, where data type, number of positions, and, if
required, decimal places, are entered directly.
o Specification of a reference type.
and SE11 and click on datatype and click on table type and enter the line type.
Thanks
Shiva

Error in creating schedule line aggrement through BAPI

Hi All ,
I want to create schedule line aggrement (VA31) by using BAPI / FM .
I am using " SD_SALESDOCUMENT_CREATE" FM .
Here i am getting error in output when i enter shchedle line data in input .
Error is given below .
E V1 434 No schedule line category could be determined during quantity adjustment
Error only come when i want to create new schedule line ....in Changing any schedule line aggrement there is no error .
I am able to create schedule line aggrement manually .
please help .

Use BAPI_SAG_CREATE

Error whil creating Service Line item in ME51N using BAPI_PR_CREATE

Hi Experts,
            Am able to create PR number using BAPI_PR_CREATE, but when am trying to create Service line item am getting acc assignment error please check my code and solve my issue. ..its very adj please help me .
DATA : t_bapimereqitemimp TYPE TABLE OF bapimereqitemimp ,
      t_bapimereqaccount TYPE TABLE OF bapimereqaccount,
      t_bapimereqaccountx TYPE TABLE OF bapimereqaccountx,
      t_pritemx    TYPE TABLE OF bapimereqitemx,
      wa_bapimereqitemimp        TYPE bapimereqitemimp,
      pr_number TYPE bapimereqheader-preq_no,
      wa_prheader TYPE   bapimereqheader,
      wa_prheaderx TYPE bapimereqheaderx,
      wa_pritemx   TYPE bapimereqitemx,
      wa_bapimereqaccountx TYPE bapimereqaccountx,
      wa_bapimereqaccount TYPE bapimereqaccount,
      t_return     TYPE TABLE OF bapiret2,
      wa_return    TYPE bapiret2.
DATA : t_bapi_srv_limit_data TYPE TABLE OF bapi_srv_limit_data,
        wa_bapi_srv_limit_data TYPE bapi_srv_limit_data.
DATA servicelimitx TYPE TABLE OF bapi_srv_limit_datax.
DATA w_servicelimitx TYPE bapi_srv_limit_datax.
DATA : t_servicelines TYPE TABLE OF bapi_srv_service_line,
        w_servicelines TYPE bapi_srv_service_line,
        t_servicelinesx TYPE TABLE OF bapi_srv_service_linex,
        w_servicelinesx TYPE bapi_srv_service_linex,
        t_bapi_srv_acc_data TYPE TABLE OF bapi_srv_acc_data,
        w_bapi_srv_acc_data TYPE bapi_srv_acc_data,
        t_bapi_srv_acc_datax TYPE TABLE OF bapi_srv_acc_datax,
        w_bapi_srv_acc_datax TYPE bapi_srv_acc_datax.
DATA : t_bapimereqitem TYPE TABLE OF bapimereqitem,
        w_bapimereqitem TYPE bapimereqitem.
DATA : t_bapimereqitemx TYPE TABLE OF bapimereqitemx,
        w_bapimereqitemx TYPE bapimereqitemx.
wa_prheader-pr_type = 'RV'."lv_doc_type.
wa_prheaderx-pr_type = 'X'.
wa_bapimereqitemimp-preq_item = '1'."wa_eban-item.
wa_bapimereqitemimp-pur_group = '100'."wa_eban-ekgrp.
wa_bapimereqitemimp-preq_name = 'E.R. TITTO'."wa_eban-afnam.
wa_bapimereqitemimp-short_text = 'AC Fitting'."wa_eban-txz01.
wa_bapimereqitemimp-material   = ' '."wa_eban-matnr.
wa_bapimereqitemimp-plant      = '1000'."wa_eban-werks.
wa_bapimereqitemimp-store_loc = 'ST00'."wa_eban-lgort.
wa_bapimereqitemimp-matl_group = 'Z13'."wa_eban-matkl.
wa_bapimereqitemimp-quantity   = '1'."wa_eban-menge.
wa_bapimereqitemimp-unit       = 'AU'."wa_eban-meins.
wa_bapimereqitemimp-deliv_date = '20140604'."wa_eban-lfdat.
wa_bapimereqitemimp-preq_price = '100'."wa_eban-preis.
wa_bapimereqitemimp-item_cat   = 'D'."wa_eban-pstyp.
wa_bapimereqitemimp-acctasscat = 'K'."wa_eban-knttp.
wa_bapimereqitemimp-fixed_vend = ' '."wa_eban-flief.
wa_bapimereqitemimp-purch_org = '1000'."wa_eban-ekorg.
wa_bapimereqitemimp-currency   = 'INR'."wa_eban-waers.
wa_bapimereqitemimp-pckg_no = '00000001'.
wa_bapimereqaccount-preq_item = '1'."wa_eban-item.
*wa_bapimereqaccount-serial_no = '01'.
wa_bapimereqaccount-gl_account = '0000002244'."wa_eban-sakto.
wa_bapimereqaccount-costcenter = 'OPSD'."wa_eban-kostl.
APPEND wa_bapimereqitemimp TO t_bapimereqitemimp.
APPEND wa_bapimereqaccount TO t_bapimereqaccount.
wa_pritemx-preq_item = '1'."wa_eban-item.
wa_pritemx-pur_group = 'X'.
wa_pritemx-preq_name = 'X'.
wa_pritemx-short_text = 'X'.
wa_pritemx-material   = 'X'.
wa_pritemx-plant      = 'X'.
wa_pritemx-store_loc = 'X'.
wa_pritemx-matl_group = 'X'.
wa_pritemx-quantity   = 'X'.
wa_pritemx-unit       = 'X'.
wa_pritemx-deliv_date = 'X'.
wa_pritemx-preq_price = 'X'.
wa_pritemx-item_cat   = 'X'.
wa_pritemx-acctasscat = 'X'.
wa_pritemx-fixed_vend = 'X'.
wa_pritemx-purch_org = 'X'.
wa_pritemx-currency   = 'X'.
wa_pritemx-pckg_no   = 'X'.
wa_bapimereqaccountx-preq_item = '1'."wa_eban-item.
*wa_bapimereqaccountx-serial_no = '01'.
wa_bapimereqaccountx-preq_itemx = 'X'.
wa_bapimereqaccountx-serial_nox = 'X'.
wa_bapimereqaccountx-gl_account = 'X'.
wa_bapimereqaccountx-costcenter = 'X'.
APPEND wa_pritemx TO t_pritemx.
APPEND wa_bapimereqaccountx TO t_bapimereqaccountx.
**Service item limit
*wa_bapi_srv_limit_data-doc_item = '10'.
wa_bapi_srv_limit_data-overall_limit = '1000'.
wa_bapi_srv_limit_data-exp_value = '800'.
APPEND wa_bapi_srv_limit_data TO t_bapi_srv_limit_data.
*w_servicelimitx-doc_item = '10'.
w_servicelimitx-overall_limit = 'X'.
w_servicelimitx-exp_value = 'X'.
APPEND w_servicelimitx TO servicelimitx.
w_bapimereqitem-preq_item = '10'.
***w_bapimereqitem-preq_name = 'E.R. TITTO'.
***w_bapimereqitem-plant = '1000'.
***w_bapimereqitem-store_loc = 'ST00'.
***w_bapimereqitem-matl_group = 'Z03'.
***w_bapimereqitem-quantity = '1'.
***w_bapimereqitem-unit = 'AU'.
w_bapimereqitem-item_cat = 'D'.
w_bapimereqitem-deliv_time = '20140604'.
w_bapimereqitem-acctasscat = 'K'.
**w_bapimereqitem-consumpt = 'U'.
APPEND w_bapimereqitem TO t_bapimereqitem.
**w_bapi_srv_acc_data-doc_item = '1'.
**w_bapi_srv_acc_data-outline = '0000000001'.
*w_bapi_srv_acc_data-srv_line = '20'.
w_bapi_srv_acc_data-serial_no = '10'.
w_bapi_srv_acc_data-serial_no_item = 'D'.
*w_bapi_srv_acc_data-quantity = '1'.
*APPEND w_bapi_srv_acc_data TO t_bapi_srv_acc_data.
**w_bapi_srv_acc_datax-doc_item = '1'.
**w_bapi_srv_acc_datax-outline = '0000000001'.
*w_bapi_srv_acc_datax-srv_line = '20'.
**w_bapi_srv_acc_datax-serial_no = '01'.
**w_bapi_srv_acc_datax-serial_no_item = '01'.
*w_bapi_srv_acc_datax-quantity = '1'.
*APPEND w_bapi_srv_acc_datax TO t_bapi_srv_acc_datax.
w_servicelines-service = '00000001'.
APPEND w_servicelines TO t_servicelines.
w_servicelinesx-service = 'X'.
APPEND w_servicelinesx TO t_servicelinesx.
CALL FUNCTION 'BAPI_PR_CREATE'
   EXPORTING
     prheader        = wa_prheader
     prheaderx       = wa_prheaderx
   IMPORTING
     number          = pr_number
   TABLES
     return          = t_return
     pritem          = t_bapimereqitemimp
     pritemx         = t_pritemx
     pritemexp       = t_bapimereqitem
     praccount       = t_bapimereqaccount
     praccountx      = t_bapimereqaccountx
     servicelimit    = t_bapi_srv_limit_data
     servicelimitx   = servicelimitx
     servicelines    = t_servicelines
     servicelinesx   = t_servicelinesx
     serviceaccount = t_bapi_srv_acc_data
     serviceaccountx = t_bapi_srv_acc_datax.

Hi,
Check this Thread , Thread1 . It might help you to resolve the issue.
Thanks
KH

How to create 2 lines header in Report painter

Hi. I am not good at Report painter. I want to create 2 lines header in Report painter just like SAP std report.
When I create a new form, I only have one line header form but cannot add additional header line.
I am looking at the 0SAPFS10-01 Trans.Fig.- Balances. which has two header lines
                           Debit              Credit            Balance       Accumulated Balanc
Periods                     &1FY               &1FY               &1FY               &1FY
I can create only one header just like
Periods                 Debit              Credit            Balance       Accumulated Balanc
cannot add additional line for
      &1FY               &1FY               &1FY               &1FY
please advise me
thanks in advance.

In report painter you can select variouselements based on which the data will be pulled. I haven't seen any report painter with two header lines and don't think report painter allows that. But for your requirement I believe you can select the periods in the header line itself.

How do I create a number line in iBook? I need to create a Line Plot, which includes a number line and X's above it. Thanks!

I am trying to create a Line Plot using iBook. This includes a number line with X's above the numbers. Any suggestions would be appreciated.
Thank you!

Hi, and welcome to Apple Support Communities.
Which version of MathType are you using?
Which exact model iBook do you have? You can choose from this list:
http://www.everymac.com/systems/apple/ibook/index-ibook.html
Which version of the operating system is the iBook running?
Or are you talking about iBooks Author?

Creating Asset Lines from Projects

Hi All,
We have transactions recorded in Projects module which need to be sent to assets module for creation of assets
However, the problem here is that they need to create many asset lines from one transaction (400-500 asset lines)
Users have been manually completing information required to create asset lines from projects module and running the program to transfer to assets module
In this case there are too many lines to create manually,
Is there any workaround to this issue?
Can the lines be transferred to assets module and then split on the prepare mass additions form? If so, can you please let me know the details, to transfer the line as a "multi-unit" line so it can be split on the mass additions form
Thanks!

I was thinking just that conroy, attached is a crop of the type of the black and white scan I'm working with, this was originally a trace, it is a very large document this is just one part of it.
Thanks Noel I did mess around with your suggestions, not sure I achieved what I was after, it was either too strong removing everything or too weak.
What I'm trying to do is get rid of the speckle (despeckle filter cleans it a little) and just have all the lines nicely redrawn and crisp. I've so far being doing it manually but it is 1) inaccurate and 2) taking me a very long time.

Creating die lines in CS3

Similar Messages

Maybe you are looking for