Creating die lines in illustrator
I have been doing some research on creating die lines in illy but I have some unanswered questions: (using a standard box as an example)
1. If I want to indicate a fold (dotted line) at the base of a tab, do I create a dotted stroke across the fold, leaving an open path with the end anchor points overlapping the shape of the tab at the base?
2. Is the die line for a basic box one shape (closed path) with fold line strokes (open paths) overlapping the shape? Or are packages made from a bunch of different shapes (individual closed paths) all touching each other (overlapping sides) where each shape would be a section of the box?
4. Do the fold lines go on a separate layer from the cut lines?
I haven't been able to find a tutorial to create the die line from scratch by just going off measurements, so my questions are in regards to using the pen tool and shapes to get to the final image of the die.
Thanks!
1. Yes
2. Yes one shape is preferred. Often dies from Autocad do not have the paths conneceted and we have to connect them.
4. No the fold lines do not have to go on a seperate layer, use a global color for folds (also bleed & trim). If someone wants the folds on a separate layer , they can select the strokes fo similar color and easily do that.
Make sure use preview bounds is off, or else your stroke thickness will be calculated into your sizes in the tranform palette, and throw your die off by half the thickness of your stroke. .5pt is often preferred for die line thickness, unless large scale itmes can go to 1 pt.
Similar Messages
-
Does anyone know of a Plug In for any of the CS3 products that will create a die line for packaging. I have seen a product for MAC, but none for PC.
1. Yes
2. Yes one shape is preferred. Often dies from Autocad do not have the paths conneceted and we have to connect them.
4. No the fold lines do not have to go on a seperate layer, use a global color for folds (also bleed & trim). If someone wants the folds on a separate layer , they can select the strokes fo similar color and easily do that.
Make sure use preview bounds is off, or else your stroke thickness will be calculated into your sizes in the tranform palette, and throw your die off by half the thickness of your stroke. .5pt is often preferred for die line thickness, unless large scale itmes can go to 1 pt. -
Creating layered line art mesh grids
I would like to create some artwork in illustrator which is based on the same styles as seen here > link to image
However, I am not sure of the best way to do so - I think it may be best to create basic grids and then distort them
I also want to make sure that each layered grid is free from backgrounds so the LINES flow free an mesh together
Can anyone provide any guidance as to the best and easiest/quickest way to create this kind of artwork please ?
I am sure it's simple if you know how but as a newbie to CS5 i dont - so before I launch into attempts with line art grids and then distort them - i wanted to check if there's a better way
thanksI would say envelope distort would be easiest.
I use the Effect>Distort and Transform>Transform to make the repaeat of the lines one for the Vertical and one for the horizontal so I have the grid.
I selected it all and went to Object>Envelope Distor>Make with Mesh if you practice with the envelope mesh you cn get to even give you straight lines as well -
How to create unique shapes in Illustrator CS4
First off....
I am new to the Adobe suite of applications and also new to owning a Macbook Pro. I have been using a design program for Windows for many years.
I would like to master the creation and manipulation of shapes using Illustrator CS4.
As one example, how would I create the following:
I want to end up with a shape that is similar to one-quarter of a full moon.
Using my Windows program (not an Adobe product), I would create a line using a line tool, and then I would be able to convert that line to a curve using a shape tool, which would enable me to drag from the midpoint of the line and have it become an arc. Then, while still using the shape tool, I could click once to select one of the endpoint nodes to then click on an "auto-close" option which would add a straight-line edge to close the shape for outline and fill purposes (so one side of the shape is straight at this point and the other side is curved). Using the shape tool, I would double-click near the midpoint of the straight edge to add a new node to the shape, and then I would use the "convert to curve" option from within the shape tool to be able to drag this straight side towards the curved side to end up with the quarter-moon shape as desired.
How would I make this sort of shape using Illustrator, and as a general question for learning, how can I learn all about how to put lines in the design space for purposes of joining these lines, curving any part of one or more lines and then filling or outlining the finished shape made from joined lines?> and as a general question for learning, how can I learn all about how to put lines in the design space for purposes of joining these lines, curving any part of one or more lines and then filling or outlining the finished shape made from joined lines?
Well, you can read the documentation. That will be much more thorough and methodical than asking a random series of "how do I..." questions in a user forum. And it will take you
a lot less time.
> Using my Windows program (not an Adobe product)
You can say the name. If there's actually anyone here who doesn't know other drawing programs exist, well, they
need to. Your description sounds like Xara Xtreme.
> I want to end up with a shape that is similar to one-quarter of a full moon..create a line...convert that line to a curve...drag from the midpoint of the line and have it become an arc...select one of the endpoint nodes... "auto-close"...double-click near the midpoint of the straight edge to add a new node..."convert to curve"...drag...
A similar procedure could be used in just about any vector drawing program that draws cubic Bezier curves. A much quicker procedure could also be used in just about any program, by leveraging the geometric shape tools and path combination commands that are just as ubiquitous:
1. Draw a circle.
2. Duplicate the circle.
3. Overlap the circles partially.
4. Use one circle to "punch" the other, leaving the difference (the crescent shape).
Here are two AI-specific differences I note in your description:
Illustrator can't bend a straght segment by dragging its middle if the straight segment has both its associated curve handles retracted. Dragging such a segment in AI just moves the segment (and its associated anchorPoints).
Illustrator displays fills on open paths. There is no option to turn off that often unwanted behavior.
Again, read the manual (the online Help files). It will take you decades to learn the program by asking random questions on the basic use of the tools, location of commands, organization (well, disorganization) scheme of the program, etc., etc.
JET -
How to Snap to a point to measure it and create a line.
Hello, i'm new to Illustrator and would like to know how to snap to a point. i have a rectangle and would like to measure the exact distance between the edge of the rectangle to the edge of another rectangle. also, how do i create a line, starting with one end snapped to the edge of another object?
Thanks guys.Ok, how does the rect method actually work? Can you do a step by step process please?? Sorry I am new at it! Still lots to lear.
Regards,
908689Ab. Ltd
STONEY RIDGE BUSINESS CENTRE
SAM BRIERLEY | IT/Phones/Security
41 Royal Vista Dr. N.W. | Calgary Ab. | T3R 0H9
tel. 403-277-1551 | cell. 587-227-2653 | e. <mailto:[email protected]> [email protected] -
Hi! I get fine lines on repeat patterns. This also shows when sending the files an making the textile prints in production! I have searched all forums and can not find a solution! And yes I have a rectangle without fill or stroke placed behind my artwork... Please help!
Hi!
I did a test just now sending a file to my colleague (who is on an older version of illustrator). It turns out the setting is not included in the file. How can I get past this problem when sending files to someone else who will make the print?
Best Regards
Emilia
Från: Emilia Claesson
Skickat: den 8 januari 2015 14:01
Till: '[email protected]'
Ämne: SV: Lines in Illustrator patterns
Hi!
Now it did disappear on the screen at least. ☺ Would need to know if my supplier who makes the textile print need to make the same setting in her/his program or if the setting in embedded in the file?
Best Regards
Emilia
Från: Jacob Bugge
Skickat: den 8 januari 2015 13:36
Till: Emilia Claesson
Ämne: Lines in Illustrator patterns
Lines in Illustrator patterns
created by Jacob Bugge<https://forums.adobe.com/people/Jacob+Bugge> in Illustrator - View the full discussion<https://forums.adobe.com/message/7077100#7077100> -
Adobe Photoshop: how to create cut lines on landscape letter for two 5 by 7 in images?
adobe photoshop: how do i create cutting lines in adobe photoshop if my document is landscape 8.5 by 11 inches and the image are two side by side 5 by 7 in (so appearing 10 inches wides, 7 inch height)... so basically this leaves a 0.5 border top/bottom/left right....i need corner crop marks and a little line in the middle top and bottom (in the crop area) to designate where to cut the 10 inches into 2, creating my two 5 by 7 inches for each image... my guidlines are perfectly aligned, i just need to know how to make cut lines out of my guidelines except in the middle
What I use to do years ago, before most apps had auto crop marks. Was create the guidelines for the margin. Use a line tool, pen tool, etc. and create a line that goes from the guidelines where they meet each other and draw outwards to the edge of the page. Because the line is on the guideline, it snapped to it, making it a straight line. Repeated for the same corner drawing the other direction. (In other words, if I was doing the top left corner, I would draw out to the left, then repeat to draw out to the top of the page).
Group the two line, copy and flip to snap it to the next corner and repeat until all four corners of the page are done.
But if you have a postscript printer, acrobat pro, adober illustrator or adobe indesign, they will generate the crop marks for you.
tip: Do the above while creating an action and your done for the next time. Just run the action. But I reccomend that you set the rules to percentages when creating the guidelines, that way, it can work on more than one image size. -
Unable to create Schedule line(Maintain sch.agreement)
Hi experts,
After running MRP i got Planned order for a certain material and for that material procurement type maintained as "Both internal and external" in material master. After completing the process planned order to purchase requisition, i separately created schedule agreement . Now here i am facing one problem that if i create schedule line with reference to purchase requsition i am getting the error Requisition doc. type NB not allowed with doc.type LP.
pls anybody suggest is there any prob made in the above process
Regs,
SR
Edited by: SP Ramesh on Jan 1, 2010 8:22 AMgo to tcode OLME> schedule agreement> select the line of document type LP and then slecte the folled item category and then selce each item category one by one and then click on the second folders link document type and there give source document type NB
cause of the issue is : the source document type NB is not set with LP document type of schedule agreement -
CRXI Export to text - suppressed section creates blank lines
I'm using CRXI Proffesional - full version 11.5.11.1470
I have a report that uses the typical "stealth" subreport to obtain and pass info to the container, but remains invisible in preview mode. The fields in the subreport are all suppressed, the sections in the subreport are suppressed if blank and the subreport itself is suppressed when blank, the section that contains the subreport is also suppressed if blank.
This has always worked fine to get info into the container from the subreport while not creating any "white space" on the report.
Print preview and export to pdf both function just fine, omitting the blank lines.
It seems that exporting this to a text file is now creating blank lines for each occurence of the subreport.
I have seen this problem in a couple of forums but have not seen a resolution yet.
Does anybody have any idea how I can stop the exporting of suppressed blank sections ?Good morning.
We've got something to get straight first
When you say "...from the Report Viewer. The report printed as expected on HP printer...", do you mean the viewer of the .NET app, or the viewer of the CR designer?
And version 12.0.0.683, is very old (well as far as CR is concerned anyhow ). That version is SP 1, we are now on SP 2. So that will be the place to start. Get to SP 2 which can be downloaded from here;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ludek -
Using Select all to create multiple lines in a sales order
Hello SAP experts,
In our business practice users create multiple line sales orders with reference to contracts and use the copy paste method and then assign each line to the contract manually.
After a few years of this practice i found a new way to create multiple lines but it doesn't quite work correctly. When you have created the first line of an order if you click on the select all button the system will ask you how many lines do you want to copy. I don't know if this is standard SAP but 3 things don't happen when we use this 1) The schedule line information is blank 2) conditions do not copy from the contract even though the contract has been referenced. 3) Since there is no schedule line information the order fails when saving and we get a update terminated message.
I am having problems finding any documentation around this function so any help with this would be greatly appreciated.
error when updating is
Transaction.. VA01
Update key... 4D358878A8B601AAE10080000A2C4982
Generated.... 28.01.2011, 13:47:23
Completed.... 28.01.2011, 13:47:23
Error Info... 00 671: ABAP/4 processor: GETWA_NOT_ASSIGNEDGETWA_NOT_ASSIGNED
Many threads are there on this error message and you would come to know if you google with this text. Check couple of threads where the same topic was discussed
[Re: GETWA_NOT_ASSIGNED|Re: GETWA_NOT_ASSIGNED;
[Re: GETWA_NOT_ASSIGNED ABAP Dump|GETWA_NOT_ASSIGNED ABAP Dump;
Also there are some 20 OSS notes on this error message and you can have a look at the following notes:-
1) Note 913679 - VA01: Short Dump GETWA_NOT_ASSIGNED on click of quantity.
2) Note 591955 - ABAP runtime error GETWA_NOT_ASSIGNED
3) Note 870670 - SD_SALES_DOCU_MAINTAIN_DIALOG termination with GETWA_NOT_***
4) Note 141314 - VA02: Dump with 'GETWA_NOT_ASSIGNED'
thanks
G. Lakshmipathi -
Creating Schedule lines in Scheduling agreement using LSMW
Hi,
I want to upload multiple schedule lines in scheduling agreement using LSMW. I have done the recording and maintained multiple lines in input file. However during execution LSMW creates only one line and keeps on ovewritting the same line. Please let me know how can I create multiple schedule lines.
RegardsFirst you should search for existing standard LSMW migration objects that possibly cover your scenario. These normally take care of complex header / multiple items / multiple subitems relations.
With a recording you can only load flat structures. Sometimes a "create new lines" / "enter first line" / "save transaction" logic can be constructed to load multiple items to a header (or even subitems to an item?) with a recording, but this can be pretty awkward.
Thomas -
MRP does not creates Shcedule Line
I have a valid scheduling agreement LPA in place. Scheduling Agreement is approved and released status.
I have source list also maintained for same scheduling agreement with long validity and MRP indicator as 2 - Create Schedule line automatically.
I am running MRP using following parameters in MD02.
Processing key NETCH Net Change in Total Horizon
Create purchase req. 3 Planned orders
Delivery schedules 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 3 Delete and recreate planning data
Scheduling 2 Lead Time Scheduling and Capacity Planni
Even schedule line and other parameters maintained properly, MRP creates planned order and does not creates Schedule Line automatically. Material Master is maintained MRP Type PD, Lot Size as Replenishment to maximum stock level, Safety stock, No strategy and availability on.
What I am doing wrong? With same setting in other system it is working perfectly fine.
Any feedback appreciated.
Thanks
PPHi
Check whether the Agreement Open Target value .
If the target quantity was completed . so system will not create the Schedule lines for the material
2. If you mainatian the open period in the smk.
so system will create the planned order instead of schedule agreement. check -
How can I create a line break in pages for iPad?
On the Mac you can hold the shift key while pressing the return key to creat a line break. Only pressing the return key will creat a new paragraph of course.
On the iPad you only can creat paragraphs. Pressing the shif key does not change that.
Does anybody know how to force a linebrek on the pages app for iPad?Tap and hold where you wish to insert the line break. Select Insert from the pop up menu, then Line break.
this might be helpful for future reference: http://help.apple.com/pages/ipad/1.7/ -
How to create a line type in data dictionary
How to create a line type in data dictionary?Please explain step by step?
Thanks & Regads,
SairamHi,
the details abbout the line type.
The line type of a table type can be defined by:
o Specification of a type that already exists (data element,
structure, table type, table, view) whose properties are then copie
as properties of the defined table line.
o Direct type input, where data type, number of positions, and, if
required, decimal places, are entered directly.
o Specification of a reference type.
and SE11 and click on datatype and click on table type and enter the line type.
Thanks
Shiva -
Error in creating schedule line aggrement through BAPI
Hi All ,
I want to create schedule line aggrement (VA31) by using BAPI / FM .
I am using " SD_SALESDOCUMENT_CREATE" FM .
Here i am getting error in output when i enter shchedle line data in input .
Error is given below .
E V1 434 No schedule line category could be determined during quantity adjustment
Error only come when i want to create new schedule line ....in Changing any schedule line aggrement there is no error .
I am able to create schedule line aggrement manually .
please help .Use BAPI_SAG_CREATE
Maybe you are looking for
-
I attempted to purchase gems as an in app purchase in Clash of Clans. After entering my password I got a pop up saying the purchase could not be completed & telling me to go to the support page. My settings allow in app purchases. Why am I unable t
-
Deadlock detected as ORA-00060
hi, deadlock detected in DEV box with below warnings : BR0976W Database message alert - level: WARNING, line: 38869, time: 2008-05-12 00.31.38, message: ORA-00060: Deadlock detected. More info in file /oracle/DV1/saptrace/usertrace/dv1_ora_1187980.tr
-
Macbook Pro (late) 2008 won't recognize HDD and MAC OS X installed, but recognizes SAME HDD with Windows installed ... where is the problem !??? And HDD is APPLE certified ( 250 GB )
-
Dear Experts, Currently ESS portal employee photo is been wrongly getting updated.We have checked in R3 system per employee more than one JPG photo file is there. Is there any option to overwrite the last updated photo as default one in R3 system s
-
I jumped through the correct hoops to make this work once, and was fully up and running for a month or so. Then a Windows Critical Update (x3) caused blue screens to appear several times a day. At one point, I went into the BIOS and reset to all defa