Creating disk image & time machine question

I have really screwed the pooch here. I run Adobe photoshop CS2 and Acrobat Pro 7.0 on my mac. I lost the install disks in a move last year, BUT I had created a backup disk image for both and had them saved in a folder on my backup drive. Last week, when I had to take my mac in for hardware issues, I needed to do a backup of my data files and didn't have enough space on my backup drive, so I accidentally deleted that folder with all my install files. I have my licensing info for both programs - so that's not the issue - the issue is trying to figure out how I can locate either replacement disks or .dmg install files for the programs. I've searched the Internet, posted in Adobe forums but no luck. I called Adobe and they told me they don't offer disks or files for previous versions and asked me if I wanted to upgrade.
So I have 2 questions:
1. If anyone knows where I can get my hands on disks or disk image files for installing these two programs
2. Is it possible to create a disk image of an install (.app) file? I know how to create a disk image of an install disk, I've done it before. But I was wondering if there's a way to make one of an install file.
I know that I have time machine and have backed up my HD and apps. But I am extra paranoid now that I don't have a backup of the install files...and god forbid if I had to do a reinstall and for some reason my time machine backup fails me. Any help is appreciated. Thanks Jen

Check through the TM backup and see if you've those images. You might get lucky, but since you moved those to the ext HD you might be up the proverbial creek without the paddle.
1. Check ebay and buy replacement disks
2. You can put anything into a disk image. Whether or not that'll allow you to use it to install something is another question.

Similar Messages

Can't create disk image of external disk

I just switched from a PowerBook G4 running OS 10.4, to a MacBook Pro running 10.5. I'm trying to create a disk image of the old machine's hard disk, as a backup. Before doing this, I ran Disk Utility to make sure none of my disks were in need of repair.
I started up the old machine in Target Disk mode and connected it to the new one. In Disk Utility, I selected the disk, and clicked Create Disk Image. I told it to save the disk image as uncompressed and writable, on a disk that has plenty of space. So it chugs along for about an hour, creating an 80GB image.
Then once the image is done, I try to mount it and get an error, saying that the disk image has no mountable file systems. I've done this four times already, each time with the same result. In addition, if I try to restart after creating the image, the system hangs.
Any ideas why this might be happening? Are there any known bugs with Disk Utility in Leopard? Interestingly, I tried to do the same thing with Carbon Copy Cloner, and ran into a different error (it thought that it couldn't mount the newly-created image).

Yesterday I bought a Maxtor Basic external harddrive for my mac.
Followed the instructions, using Disk Utility, formatted the hd, then I tried to create a 60 gb blank encrypted disk image but failed twice; after clicking 'Create', Disk Utility does not prompt to create a password.
First time Disk Utility just hangs; there's no respond for 30mins, so i force quit it and reformatted the drive, again.
Then I tried to create a 10mb encrypted disk image and the box appears to enter a password, so I presume it was working fine.
Again, I tired to create the 60gb blank image. This time, i left it overnight, thinking maybe it just takes a longer time. No prompt for passwords, and in the morning, the msg I got was 'No drive found' or something like that, because the drive has ejected itself. (???)
Anyone has any idea why? I could create the image on my mac and throw it in the external drive, but my mac onlyhas 15 gb of space.
Let me know if this sounds like a problem with the Maxtor so I could exchange it ASAP.

Can two macs use same disk for Time Machine backup with Airport Extreme?

Hi
I use a Western Digital disk as a wireless Time Machine backup connected to the USB port on my Airport Extreme and it works great. My question is: can my girlfriend use that same disk for Time Machine backup from HER computer too? (I don't mind formatting the disk if needed.)
If she can't, is it then possible to connect a USB hub and have two disks hooked up to the Airport Extreme?
Thanks for helping. I am constantly in awe of all the help people like you give people like me. Thanks!!!
Jakob

I've gone through the manual setup and the assisted setup and can't seem to get my MacBook to use the Time Machine. Any thoughts or help would be greatly appreciated.
Well, as the Jolly Giant points out....+this type of configuration is not supported by Apple+, so it's difficult, if not impossible, to provide a fix for something that Apple says that you cannot do. Reference these Apple Support documents regarding this topic:
http://support.apple.com/kb/HT2038
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
Your situation is not unlike other users who try this and find that one computer may backup...(usually for a limited time before corruption issues start to creep in)...but another computer cannot backup. Count me as one of those users who thought that because things seemed to work that I had somehow "beat the system".
I started getting the corruption error messages after 4-5 weeks of successful backups, so I figured that it did not make sense to continue to try to get a second computer to backup (yes, I too could not setup a second Mac to backup).
Sorry, I could not get a second machine to backup, so can't tell you how to accomplish that goal. If you want to continue to try backing up this way, you might want to also think about a second backup strategy...just in case backups become corrupted on the WD drive.
Maybe if Apple says you cannot do this, they just may be right?
Message was edited by: Bob Timmons

Restore to different disk from Time Machine backup

Using Snow Leopard. I installed a larger hard disk in my Macbook Pro just over a week ago, and kept the old disk. Time Machine had worked before the update and continued to work after the update. So I did another week of work and created new documents, etc. hopefully all backed up.
Then the new larger hard disk crashed, so I had to revert to my old disk which still had the old data on it. The old disk was named xxx180 and the new disk large disk xxx500. The user name and account name were the same on both.
With the old disk now back, if I look into Time Machine, I can only see backups containing data from dates previous to the upgrade, but all of those files are already on my disk. The later dates are there in time machine, but they have no files.
I have tried migration assistant, but it says that I can't have 2 user accounts with the same name - I don't want to re-create the account, just restore a few files.
I have booted from the Snow Leopeard disk and gone into Disk Utility to 'restore from Time Machine', but it says that the large disk information is 475 GB and will not fit onto the old small disk. I know that I only added a few documents and that they shoud fit on the spare space on the old small disk. The difference is only a few days of important text documents.
Can I see the backup files on the Time Machine disk other than through the Time Machine application?

Time Machine - Troubleshooting E3. I can't see backups for a disk/partition that's no longer connected

Cannot create disk image iDvd 7.1.2 (multiplex error)

I'm at my wits end and extremely disappointed.
Basically, I've gone through the threads that I can find, I'm down to importing a basic movie directly into iDvd. No menus. No options enabled (that I'm aware of).
When I go through the iDvd process of creating a disk image all goes smoothy until the very end when I get a multiplexor error (no error code or text saying why).
Extremely frustrating. This is on a new Macbook Pro running 10.7.2. I don't have problems with my other Apple systems, just this new one. Perhaps Apple would like to take it back??

Hi
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) -
one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

How to turn off the 'Use disk for Time Machine?' warning

I have Time Machine set to OFF.
I use cloning software instead; "SuperDuper" with a "Voyager Q" unit attached via FW 800
I rotate my external backups HDs using 2 x 3.5" HDs.
How do I get rid of the annoying message; ‘Use disk for Time Machine?’ each time I attach an external HD?
I have tried the solution at;
http://www.macworld.com/article/133175/2008/04/105notmdrive.html
but doesn't work for me.
Mind you, the article was written for 10.5 and I was hoping the same solution would apply to 10.6.
Anyone have an answer?
Many thanks in advance,
Michael.

Think I just found the answer to my own question.
External drive has to be mounted on the desktop BEFORE the following command is run.
defaults write com.apple.TimeMachine DoNotOfferNewDisksForBackup -bool YES
this assumes you've setup TM
Now I don't see that annoying message.

What's the best way to create disk images?

of 300GB hard drives or partitions?
Disk utility is failing for me with an input/output error.
A typical example:
I have a new HFS+ 500GB external FW 800 drive that I am using a destination.
I will boot from my original 'install' DVD and then open up disk utility to start the disk image creation.
Note: my source is my "Macintosh HD" partition that is around 300GB.
Everything looks like it is running well, then a couple hours into it, it fails... something like:
"cannot create img.. blah input/output error".
Note: Verify Disk shows no errors on the source.
One guess is that the img creation process is failing after I leave the computer and perhaps my computer falls asleep. I tried setting the 'Energy Saver' prefs in the systems prefs, but of course, since I'm running off the install DVD, I wasn't able to get into the prefs.
Anyway, ultimately, I need to create periodic disk images of my macs.. so what are people using to do this?
Thanks for the comments!
Donovan

Eric, Carbon Copy Cloner is what I was leaning towards. The owner says his guess is that there are bad blocks on my HD, and since Disk Utility is block based, that it is failing where CCC is file based, and will just skip files that are corrupted or that it can't copy.
I guess I'll roll with that for now.. but it would be nice if the Disk Utility logs spit out a more descriptive log.. instead of "could not create disk image, input/output error".
Thanks!
Donovan

I am changing to a larger hard drive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything?

I am installing a larger harddrive on my Mac. Can I copy the Aperture library from my backup disk running Time Machine without loosing anything? I am getting help migrating everything else on to the new harddrive, but since copying the 350Gb Aperture library takes a lot of time, I am planning to do that part myself.

I found the following information on Time Machine help about restoring Aperture library from TM
Restoring Your Aperture System
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
Restoring Your Aperture System
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
If you buy a new computer or use another system at a different location and want access to the Aperture library, you can install Aperture and then transfer the library from your vault (on your backup disk) to the other computer. If you experience equipment failure or other unexpected events, such as fire or weather-related damage to your equipment, you can easily restore the entire library to your new computer from a backup disk.
HideTo restore the entire library from an external backup disk
Connect the hard disk drive that contains the most up-to-date vault to your computer and open Aperture.
Choose File > Vault > Restore Library.The Restore Library dialog appears.
Choose the vault you want to use to restore your library from the Source Vault pop-up menu.If the vault doesn’t appear in the Source Vault pop-up menu, choose Select Source Vault from the Source Vault pop-up menu, navigate to the vaults location in the Select Source Vault dialog, then click Select.
Click Restore, then click Restore again.

Disk Utility Error 61 when attempting to create disk image on external driv

I would like to make occasional archive backups of my three macintosh computers. I bought a new Western Digital 2TB drive for this purpose, and formatted it as Mac OS Extended. Trying to do a disk image backup using Disk Utility, I follow the directions:
- Startup from an install DVD.
- Start Disk Utilities and select "Restore"
- Drag "Macintosh HD" into the Source box
- Click on "New Image" and select compressed and 128-bit AES encryption
This leads to the error message: Unable to create "....." (error -61)
I have enocountered this problem both with my iMac G5 and a MacBook, both running Leopard.
Does anyone know what this error means, what I am doing wrong, and/or if there is another way to create disk image backups? Help!

1. For reasons I don't know disc images seem to become more fragile the larger they get. They also can be subject to file corruption that affects the entire disc image, whereas file corruption on a clone would only affect certain files.
2. You cannot put multiple clones on the same volume. Each clone must be on a separate volume, but you can have multiple volumes on a single drive simply by partitioning the drive accordingly. Of course you need a drive large enough to accommodate each clone. Each clone should be to a space equal to the capacity of the cloned drive.
3. I'm not a big fan of TM, although I must confess it has become more reliable since it's release, especially with Snow Leopard. However, there are many backup utilities that can create clones, perform incremental updates, and archive changed files. See the following:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

I have backed up my disk using Time Machine. Now I want to delete the backed-up files from my hard drive. But when I do and reconnect the external hard drive, the files are also deleted on that. What do I do?

I have backed up my disk using Time Machine. I then deleted the back-up files from my MacBook hard drive.
I then reconnected my external hard drive and find the files I deleted from my hard drive are also deleted from
my external hard drive. Can someone tell my what what happened? I'm confused.

Hello,
Time Machine is not a good way to do that, when it eventually needs more room it deletes old Backups to make room.
If you really want to keep Files but remove them from the Internal Drive, then I'd get another external drive to copy or clone them to that is not used for TM.

I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?

Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

How to limit the amount of disk space Time Machine will use?

On Yosemite, how do you limit the amount of disk space Time Machine will use?
I'm using a Seagate Goflex Home 2tb drive connected to my router as a Time Machine backup drive. I use this for three things 1)Time Machine 2) an occasional backup of windows document subdirectory 3) backup of music and photos for long term storage. Doing something like re-partioning the drive is not an option. I'll just go buy another drive for time machine's sole use. In addition, using software from Seagate is not an option. I don't want to use their software for different reasons (mainly the GoFlex home is really designed as a "media server" which I don't use. I, of course, use iTunes. ) On the Mac, I'm only using about 250GB total but time machine is rapidly using up space.
Apparently using a terminal command like below, used to work, but no longer works under Yosemite.
For a limit of 100gb the number below would be 100 x 1024
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 102400
To remove the limit, use the following command:
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
Now, I'm not too familiar with terminal and I'm not about ready to issue a command without knowing exactly what it is going to do.
Is there an easier "switch" someplace or an app that does this?
If I don't limit the size, at some point there will not be any space left for windows backups and additional photo and music files.

Hmm- added "sudo" and there was no error reported:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
I guess we'll see.

Cannot create disk image in Disk Utility

I am trying to create a disk image of my macbook pro hard drive to an external firewire drive. The image starts, then I get an error that says "unable to create disk image: Input/Output Error"
I've verified both disks and permissions, but the image creation still fails. I've never had this happen before, and can't find anything about it. Any ideas?
Thanks,
-Jason

Glynn;
You're a genius - THANK YOU!!!!
I just wanted to backup my HD before I upgraded to tiger again .. had my main HD go flakey on me and had to resort to my back up jaguar drive - You're a genius and this worked for me .. as I got the device busy message as well. I figured it was because I was on my start up drive, but didn't have the extra OS drive anymore to switch start up disks to do this.
Thanx so much for your answer!!!
Try this. Open disk utility and highlight your
MacintoshHD(the one you want to copy). In the
options inside the
window(FirstAid-Erase-RAID-Restore) choose restore.
For the source--The Top field--Drag the highlighted
MacintoshHD to the source field.
Destination Field--Drag the image of your lacie
drive(Thats also in the side bar below your
MacintoshHD) to the destination field. click
restore....
g4 Mac OS X (10.3.9)

Where to Post Time Machine Question?

My question title says it all. How do I find the area in which to post a Time Machine question? Or do I just do it here? Thanks.

There is no place to post a question on Time Machine

How large should a disk for time machine be vs the hard disk

Can anyone tell me how large a disk for time machine be vs the size of the hard disk?

I usually say 2x or more but your milage may vary on that based on how much your hard drive is actually used, what sort of data (how large the files are) you typically handle and how far back you want your TM backup to go.

Creating disk image & time machine question

Similar Messages

Maybe you are looking for