Creating DVCAM Master from HDV QT

Hello all,
I'm creating a DVCAM master from An HDV project, Which is the best way to get top quality. Should I be rendering in PRORES 422, and then using the Kona card, to downconvert?
or should I use compressor to convert and if so what setting sdo you reccommend, or finally do I put it al in an SD timeline, render out and the export to Tape
Any help would be most appreciated.
Best wishes,
Fred

Try changing the render to ProRes... just select the sequence, then type cmd+zero to open it's settings... the setting is in the video processing tab.
Then render, choose file/export using compressor...
Jerry

Similar Messages

Create Customer Master from Vendor Master

Is there a program that allows for batch creation of customers from vendors so that you don't have to rekey all the information?
Thanks,
CM

No, You may have to create a custom program to do that.

Recommended setup for creating DLT master from adobe encore

Hi, I have been working on a PC and just made a move to a Mac Pro using Adobe CS5. I am hoping someone can recommend a setup for creating DLT masters Encore. I understand a card is needed as well as the DLT drive.

This forum is for Apple software. Best post your thread on the Adobe forums.
x

ERROR -WHILE LOADING MATERIAL MASTER FROM A FLAT FILE

HI GUYS ,
I AM TRYING TO CREATE MATERIAL MASTER FROM A FROM FLAT FILE
IAM GETTIGN AN ERROR MESSAGE
'YOU HAVE NOT FULLY MAINTAINED THE DESCRIPTIONS'
REQUIRE HELP ON THIS
THANKS

Hello Nishant
All the inputs that are required to create a material in dialog (MM01) should be mandatory as well if you are going for LSMW or BAPI. Obviously your material requires a description (which will end up in MAKT). If you have this description in your flat file then there are additional (perhaps language-dependent) descriptions required.
You could try to use BAPI_MATERIAL_SAVEDATA in your test environment to find out the minimum input that is required to create a material in R/3.
You may also have a look at thread what are the parameters have to pass to bapi material creation?
Regards
Uwe

Creating Vendor Master Records from HR Master Records

Dear Experts,
I have been using t-code PRAA to create vendor master records from HR master records. The client would like to have one vendor number for a group of employees (in this case external contractors all working for the same company). The system won't allow me to link several PERNR to one LIFNR (i.e. error message).
Is it, however, possible to do this?
Thank you.
Edited by: Philip on Jan 14, 2011 9:58 PM

Hi ,
PRAA has one to one relation ship , means it created 1 vendor for 1 employee .
If you are using PERNR then you cant use one vendor to may PERNR .
Either create them as individual vendor or else have a manual control system in place where in you will have to create a dummy PERNR and then allocate all the cost to this invidual vendor , if you are paying the check to only 1 contractor for say 100 contract employees you can use this .
else it is a better mechanism and control to have 1 is to 1 in case of employee to vedor .
Regards ,
Dewaang T.

How to create child part from Parent Item - BLOW UP Master - Automatically

Hi to All,
Have any one defined this process?
To create child part from Parent Item - BLOW UP Master - Automatically ie. we receive FG from customer which we need to blow up to its child part. In that case, FG should be consumed & child parts should be generated in stock.
We tried with recursive, but the stock of FG was again generating with recursive.
Ex. FG after receiving from customer in stock 1
Child parts (with offtake 1) X1, X2, X3 in stock zero.
After processing, FG stock should be zero & X1, X2, X3 = 1.
Regards
Nitin

Create a BOM for one of the "child" parts that has the "FG from customer" as a component and all the other child parts are negative quantity components (by products).
To make it simple have all the components backflushed and auto goods receipt the child in the BOM header. Create a production order, then process the confirmation (this will auto goods receipt the 1st child, consume by backflush the "FG from customer" and put the other child parts into stock as by products.
You will need to get your material prices correct first so that there is minimal variance in the production order.

How can I create a master PDX that pulls from multiple other PDXs?

I process aviation maintenance manuals, with the individual manuals having their own PDX. How can I create a master PDX that pulls from the individual PDXs?
I have access to myriad versions of Windows and Acrobat so there's that...

I’ve got 100s of manuals each with their own PDX. I’ve been asked to create a master PDX that in effect combines all of the individual PDXs into a single (cross-manufacturer, cross-fleet, cross-manual-type) searchable PDX that can be easily updated.

How to create a master detail from using jdeveloper

i am using developer 9.0.2 is it possible to create a master detail from using developer like in forms and also the detail form should be in tabular form
thank u

Yes. Just use BC4J and JClient
Frank

How do I create a master track from my tracks in garage band?

How do I create a master track in garage band

Hi Bing,
Are you asking about the master track which controls the global settings in a GarageBand project? Here is the information from the GarageBand user manual:
GarageBand Help: Work with the master track
http://help.apple.com/garageband/mac/10.0/#gbnd5e8076d0
Work with the master track
Each GarageBand project has a master track. When you show the master track, it appears below the last track in the Tracks area.
You can control the overall playback volume of a project using the Volume slider in the control bar or on the master track. Both sliders act as a master volume control for the overall project.
Generally speaking, you should adjust the output volume to a level high enough to eliminate background noise, but not high enough to cause clipping. You can check for clipping by watching the clipping indicators in the master level meter.
You can easily add a fade-out to the end of a project, so that the sound gradually fades to silence.
When you add a fade-out, four control points are added to the master track for the project. The first control point is added 10 seconds before the end of the last region in the project, the second at 7 seconds, the third at 4 seconds, and the fourth at the end of the last region.
Show the master track
Choose Track > Show Master Track.
The master track appears below the last track in the Tracks area.
Cheers,
- Judy

How to: Create a master form that auto-fills data into other pdf forms?

I hope someone can please help me. I have about 15 PDF forms that all require similar data entry (name, address etc). Can I create a master form that we fill in once per client, and then auto-fill in the matching data on the 15 forms?
I am not looking for an online solution as the information is highly sensitive.
I have already created a form in Acrobat X Pro with the 'master data', and created the (15) forms with identically named fields. How I link the forms now to the master, I cannot figure out (after much searching).
I have read similar questions on the same topic but have not found any answers. I hope this time someone can please help.
Many thanks in advance.

Thank you! I had just figured out how to export the data from the master as an FDF file and then import it to the other files. I'm afraid I don't understand scripting to automate the process across multiple files. To you mean with java script?
I've also thought about combining the forms, once we know which ones the particular client will need. I have to see how it works in practice for my colleagues who will be using them.
Thank you again.

How to change the standard query "Create a Master Agreement" by a custom one

Hello Sourcing CLM experts,
I would need to replace the standard query displayed when the user tries to create a Master Agreement by a custom query to filter the MA types according to some criteria:
According to this post: Re: Create security profile for a document template in SAP Sourcing, I've tried to achieve it by doing the following steps:
Create a new query as a copy of exsiting query FCI-ContractTypes
Modify query group FCI-ContractTypesBP to include my custom query instead of the standard one to only list the MAType "Standard Master Agreement"
Following you can see the change done into the query group FCI-ContractTypesBP:
However, standard query has not been replaced and same set of MA Types are listed.
Therefore, I would like to ask you:
Is it possible to do this kind of modifications? If so, which query group need to be modified?
If it is not possible, is there any other way to achieve that requirement?
Thanks in advance for your time and support!
Best regards,
Isaac

Hello again experts,
If this query cannot be modified, is there any option to disable button below? Or at lease, to disable the query group to avoid the listing of MA Types when it is pressed?
The reason is because we are going to set up the system in the way that only it will be possible to create Master Agreements from Template. However, if user keep on using that button he will be able to create MA from document types.
Any ideas?
Thanks again and best regards,
Isaac

Creating an image from a Mac and restoring it in another Mac

Hi,
I've spent a couple of hours trying to make a copy of one of my macminis, trying to copy it in another macmini to have the SAME machine "duplicated".
I've read some tutorials online, but something is going wrong....
First of all, I went to my "master" macmini, DiskUtility, create new image from folder, select my macintosh HD and I created the image of the whole HD.
Almost a hour after, the image was created.
Then I moved the .dmg to a USB drive, and I connected the USB pen to the machine that I want to be a "clone" of the master. There, I opened Disk Utility, Restore, I selected the Source image from my USB, but I can't selected (=drag) the Macintosh HD into the "destination" field...
What I'm doing wrong?
Thanks, any help is appreciated :))

Hi sr.richie;
If you are booted from Macintosh HD then the system will not allow this cloning operation to take place. You must boot from another disk in order to do that.
Allan

Error Message no. MM214 while creating material master

Hi folks!!
While creating material master, when i fill the MRP controller field and press enter, I get the message...
The MRP controller 391 does not exist for plant
Message no. MM214
I have checked, the MRP controller is availble in Master Data for MRP Controller. And we have already created many material master with this MRP Controller.
What could be the possible cause for this error. Please help.
Best regards

Hi Qamar,
Please go thru the bellow threads,
Assignement of MRP controller to Plant
MRP CONTROLLER
MRP Controller
Re: MRP controller extension from plant 1 to plant 2
Thanks,
Swamy H P

Error message AA119 while creating asset master through AS01

Hi
while creating asset master (AS01), i am getting following error:-
Depreciation key M003 not allowed (Check your entry)
Message no. AA119
Diagnosis
Depreciation key M003 is not defined.
System Response
Processing is terminated.
Procedure
You have the following choices:
Use a defined depreciation key (use input help).
Define a depreciation key in Customizing ("change" pushbutton) and activate the key.
I have done following in configuration:-
1) No change in base method
2) copied multi level method from standard key "011" to "M03" and maintain vlaue as - Acquisiton year - 9999, Years - 999, Validity period in month - 12, Base value key as - 01and depreciation % as 10
3) No change in Period Control Methods
4) Copied standard depreciation key "GL20" as "M003" and maintain the multilevel method as "M03"
5) save the configuration
6) Activate the depreciation key by selecting depreciation key and clicking on Activate button on top of the screen
7) Import the configuration
now while creating asset, depreciation key M003 is appearing in drop down list but getting above error. but if I tried with depreciation key GL20 (which is standard depreciation key) system accepting the input
In target client, depreciation key display in Active stage.
please revert if anybody has any clue to come out from above problem.
Regards
DD

Dear All Foram members
Thanks for your response.
I got the solution and now problem has been resolve.
Initially i have maintain Scrap Value as Default Value from Company code and Depreciation Area in Depreciation Key (AFAMA) and I was getting the error. But now I have change the Scrap Value as CutOff Value is ignore and problem gets resolve.
But still do not understand the relation between the erro and Scrap Value assignment. Any Idia. It will be helpful for other members also.
Thanks Pankaj, Madhu and Paul...........
Regards
DD

Error while creating customer master data

dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
Debesh

Hi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

Creating DVCAM Master from HDV QT

Similar Messages

Maybe you are looking for