CREATING DVD WITH SAME FRAME
Shot an HD video and imported to Final Cut Pro X. Edited my project. Now I want to burn a SD DVD of my project. My DVD comes out with loss of the original picture on the edges. The original frame is larger than what I am getting on my DVD.
The projects parameters are: 1080iHD, Resolution 1920 x1080, rate 29.97i
I did a quick check and found that if I have an HD timeline, FCPx won't allow me to change it to SD. If that's the case then you'd need to create a new SD timeline and pull your clips into that (simple copy and paste, I think). Then be sure the Inspector Spacial Conform is set to Fit and you will see a black area above and below the film. There are probably ways to output the 16:9 ration in a letterbox from within Compressor or using Compressor settings in FCPx but understand that your sweet HD is going to be pulled down to SD resolution so it will not look anything close to as sharp as the HD version was.
Similar Messages
-
How to create directories with same name in different schemas
I have two schemas on the same database.
I am trying to create directories with same name, but different paths in both the schemas.
When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
Is there any solution to create directories with same name, but different path in two different schemas on the same database.
Thanks,
Sridhar.Hi,
>>When i created the directories in second schema, the directory paths of the first schema are automatically changed to the second path.
If you have removed the REPLACE clause of your create statement, then you would see that is not possible.
SYSTEM> connect scott/tiger
Connected.
SCOTT> create directory mydir as '/tmp';
Directory created.
SCOTT> connect legatti/pwd
Connected.
LEGATTI> create directory mydir as '/tmp';
create directory mydir as '/tmp'
ERROR at line 1:
ORA-00955: name is already used by an existing object
LEGATTI> select owner,object_name,object_type,created
2 from dba_objects where object_name='MYDIR';
OWNER OBJECT_NAME OBJECT_TYPE CREATED
SYS MYDIR DIRECTORY 19/12/2007Cheers
Legatti -
Creating Equipment With Same Equipment No. In Different Maintenance Plant
Dear Gurus,
Is it possible to create equipment with same equipment No. (external Numbering) in different maintenance plant of same company code?
We have 2 plants, plant 1000 & plant 1100 & the geographlocal locations are different. These 2 manufacturing plants belong to same company code. We have implemented plant maintenance system for plant 1000 & now want to roll out the same system at plant 1100. In plant 1000 we have equipment with equipment No. M323 (External Number). Now we want to create equipment with same no. in plant 1100. How can this be done? or is it necessary to have different no.? please advice.
Regards,
Abhijit KhandekarDear Friend
As Equipment master data is client specific, you cannot have the same equipment number for same category of equipment, though plants are different.
Yes, you can do it if equipment categories are different.
I hope this will resolve your query if not let me know.
Regards
Makarand Gurjar
SAP PM consultant -
Cannot create slideshow with high frame rate
I have just bought QuickTime Pro version 7. I am using Windnows XP SP2 on a Pentium D machine.
I am trying to create a movie with still images I captured from my digital camera. I created a 10 seconds slideshow and set the frame rate to 30 frames per second. I then saved the file as a Quicktime movie. When I played the movie with my QuickTime Player, I could see actions for the first two seconds only. After that, the picture didn't change eventhough the progression bar was moving. Once the movie reached the end, the player then changed the frame to show the last picture of my slideshow.
In short, only the first 60 images are shown in the first 2 seconds. Then the slideshow was stuck with the 60th image, until it changed to the 300th image at the very end.
Does anybody has the same experience? Did I do anything wrong?One more thing. If I set the frame rate to be less than 10 frames per second, it works fine. It just won't work with high frame rate.
-
Trying to create DVD with multiple tracks that automatically goes to a slug
I'm doing a DVD for a live show where video and live performance are going back and forth. I want to make a DVD with multiple tracks that plays a movie and returns to a looping black slug (while the live act is happening). Then when the tech person presses next chapter it goes to the next movie (or chapter). That chapter/movie then returns to a looping black slug at the end of the movie (while the next live act plays) and so on and so on. Any help would be most appreciated. Thanks.
I would think one of the easiest ways to do this is make each clip end jump to a black menu with a hidden button on it that links to the next clip. The menu can stay there as long as you like. Instead of pressing the next chapter button, get your tech to press the 'enter' or 'play' button... if there is only one button on each black menu, then this is what will activate. Have each button point to the next clip that you want. Use the title button to get back to a main menu, if you ahve created one for the disc.
-
Create Equipment with same Number rang at Diff Equipment Catagory
Hallo Guys,
client bymistake created some equipments which are actually PRT with catagory M ( Machine)
now they made deletion indicator to that and inactive the part and now want to create same machine as a PRT with same number range interval
as that of made at machine, but as per std system is not allowing to create duplicate records.
How to achive this ?
Regards,
RipIf no Equipments were created after the Deleted Equipments then you may have an option.
Tcode OIEN
Go to Number range interval, Then the Current number can be changed as under. Reduce this Current number by those many equipments. Then new equipments will have the same numbers of the deleted equipments
You should do it in trial servers and if suits to you then you can decide to go ahead. You should be prepared to have filters in Selection-screes to avoid the DLFL INAC equipments appear in the reports
Jogeswara Rao K -
Creating DVD with PDF files and web links
Hi all, first I'd like to say that these forums are a big help. I've spent DAYS scouring through topics learning. Of course, I know this opens it up for someone to post a link to a thread where my question has already been answered. Unfortunately, I haven't been able to find the specific help I need and would like to open a dialogue with experts.
I am creating a marketing DVD for a product. We produced a video for it, but the client also wants the audience to have access to a large amount of research in this specific field. This exists as PDF files and links to websites.
His previous Marketing CD was just that, a CD made with FileMaker and had the files and links and only worked in PC computers. I do not want to go back in that directions.
I want to make an informative DVD with the video and a few pages of selling points and cool tricks (I discovered multilayered menus working on this!) for those viewing on TV or Computer, and then an option for Computer users to click for more info.
How do I put PDF files on the disc and how do I put web links on there?
Thanks,
ByronDVDSP uses a tool called DVD@Access. It enables a user to link to URL and call such documents as pdfs. The problem is that its never was reliable - especially on the PC side of things.
There have been many of posts in the last 2 days about its use. Do a search and you'll see.
DVD was not designed with the web in mind - it was conceived long before that time. linking to "outside" documents requires a third party tool to take over.
Just beware! - in fact if your client came to me I would refuse to do the job. I've seen the problems that exist doing work like this especially if your distributing to a large audience with different OS sets ups. If one of the users has Vista you can forget about it working at all.
My suggestion would be to design a menu that tells the user the file paths to your pdfs or URLs on the disc. -
CREATING DVDs WITH RESCUE AND RECOVERY 4.3
I note an option "Create a backup to CDs/DVDs in RnR. Does this option produce a set of bootable disks which is equivalent to factory rescue disks but which also contains my installed programs? In other words, does it create an image of the fully installed HDD which can be restored in future?
Solved!
Go to Solution.Hi,
in case this is (as you said) directly in the RnR GUI, then this is the option, which will create a full backup of the current state of your system on CD/DVDs. To the answer is YES.
Regarding your second question:
These DVD's that you will create will not behave like the original DVDs. In case you will recover the whole system using these newly created DVD's then the procedure will be a bit different then the one, that is used by the original Recovery DVD'.
However, the basic is still that same:
- you bootup from the first DVD, make few "clicing" and the application will do the rest.
Let me know if you have any other questions.
Cheers -
Hi,
I have created one external content type in sharepoint designer to insert/update/delete table data.
This table contains Primary key constraint.
Then I have added this external content type to Sharepoint out of box List.
Insert/Update/Delete is working fine. But when I am trying to insert record with the same id which is already exist in table, page crashed and its giving me following error:
“Violation of PRIMARY KEY constraint 'PK_tbl_Accounts'. Cannot insert duplicate key in object 'dbo.tbl_Accounts'.
The duplicate key value is (1). The statement has been terminated.”
So I want to handle this exception. Can we show any popup message to hide this error?
Thanks & Regards
RajniAvoid entering of primary from form if possible.
if not try to customize the new form with infopath and place your custom logic there.
http://lightningtools.com/uncategorized/modifying-external-list-forms-with-infopath-2010/
http://salnikan.wordpress.com/2011/07/26/prevention-of-duplicate-entries-based-on-two-or-more-columns-in-a-sharepoint-list/
Bala -
How create page with two frame (google geocoding BSP)
Hi all,
can someone suggest me how create an BSP application with the main page composed by two frae?
I've create a page with tags <htmlb> gridLayout for ape the frame structure and the result is fine.
here the screenshot of what i've done: http://img17.imageshack.us/img17/3558/bspgeolocalization.jpg
But now i've to call the right page frame ( obviously in his frame) from the left page controller after pressing the 'search button'
and passing to it a table.
someone has an idea?
Thanks in advance,
Davidecheckt his thread
Web template keep loading/refreshing in BSP
though the question is for different purpose, you can find the code for framed pages there -
How to download Encore software to create dvd with adobe premiere CC
Hi, i would like to create a dvd from a project edited in adobe premiere pro cc and i can't download the software Encore on the cloud. I saw that i can use Encore CS6 but I can't find it anywhere. Can someone tell me where i could download it or is there any other solution to create a good quality dvd. Thank you. (I have a PC windows 7)
Hi,
Please refer to the help document below to install Encore from Adobe CC:
Encore CS6 not installed with Creative Cloud
Regards,
Sheena -
IDVD creates DVD with audio out of sync
Hi All,
Just created a DVD using a quicktime .mov file. The .mov file, when played on my MacPro, stays in sync and works just fine.
However, I pressed it to DVD using iDVD and about 10 or 15 minutes in, the audio is suddenly out of sync with the video.
Any suggestions?
Thanks,
iSounds like the video was shot with 12 bit audio. Please make certain your camera /camcorder is set properly to 16 bit audio (not 12 bit).
These links may help but if not just come on back:
http://discussions.apple.com/thread.jspa?messageID=10060262�
http://discussions.apple.com/thread.jspa?messageID=8084879�
Message was edited by: SDMacuser -
Create dvd with audio starting with Keynote
I've created a Keynote presentation with builds and timings set to a particular piece of audio track from garage band. It's roughly 20 mins with 160 slides.
What is the best way to convert it to be able to play on home dvd on TV or HD TV? I've tried export to QT then iDVD but presentation and audio didn't match worth a darn and I seem to lose the timings but didn't actually measure.I recently created a 35 slide, 15 minute presentation to put on a DVD and just exported it as an interactive slideshow (quicktime) and then dropped the file into iDVD and it worked great. I didn't have any problems with timing, since I set everything up before I exported it.
-
Create DVD with DVD Studio Pro with Flash Content
I'd like to create a DVD that will run like usual on a DVD player and TV, but that could contain flash files that would run on a computer. Is there a way to do this?
Another app is Sonic eDVD if you want to be able to launch files from the interface. Both have a lot of cons though... You can just add ROM data for the user to browse if you want to too.
You can autorun the flash content if you want, so the user see's it on the PC and not the DVD-Video when the disc is put it,
-Jake -
Is it possible to burn DVDs of clips with a working timeline so that others, not working with Final Cut can view the raw data and be able to discuss the material in reference to time? IE..."I think we should use Clip number 10.26.08.526 from 4:23 to 4:37.
You can make a QT movie file and that will contain the timecode and send just that or you can use the timecode reader effect and burn in the time code on the video then make the mpeg/ac3 files for the DVD.
o| TonyTony |o
Maybe you are looking for
-
What do I do if the screen turned black with red line across it and it wont resod?
I have tryed everything i could think of but it still wont wotk!!!!!!!!!!!
-
Snow Leopard installation on Mac Mini has failed
Hi, Does anyone know whether Snow Leopard checks what hard disk is installed in order to satisfy installation requirements as I've fitted an SSD Hard Disk Drive in my Macintel Mac Mini and installing Snow Leopard has failed (no longer boots into any
-
Powermac G5 wont boot/no boot sound/no video just flashing led
Ok, I think I have a serious problem, the problem came up when I removed RAM, and befor that computer worked just fine (i have dual powermac G5 2GHz). And after that to resolve that issue I tried everything: - reset PRAM; - reset SMU; - unpluging eve
-
Java code on a customizable jsp
Greetings does anybody know how should i place this code on a template for customizable pages?? <%! String ip=CacheParametrosAplicacion.obtenerInstancia().obtenerDatoParametro("IP_CONTENT_CSS"); String puerto=CacheParametrosAplicacion.obtenerInstanci
-
Oracle: slow performance with SELECT using ojdbc14 and connection pooling
Hello, i'm working hard the last days to solve a performance problem with our customer using a oracle 10g database. For testing I used our oracle 9.2.0.1.0 database which shows the same symptoms. All doing solved nothing: the performance while using