Creating dynamic dsn

i want to create dynamic dsn i.e i have built a small package which is on a cd and i want that whoever installs the package will not have to set up the dsn .it will be setup automatically i.e anyone can use it
how to do it

It's been answered on this forum before - thank you, Thomas K.
You can connect to Access without a DSN using a URL like this:
Connection connection = DriverManager.getConnection("jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=<full path to Access mdb file>");You don't have to create a DSN that way.
Is that what you want? - MOD

Similar Messages

How to mention numbers in array while creating dynamic sql

Hi,
I am creating a dynamic sql and in that I am selecting some rows from the table and storing it into the array.
I am firing this sql statement within trigger.
But i got the error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
I took the same sql statement (the one which was created dynamically) in the procedure and tried to run it but it gave me the same error.
=========================================================
Begin
type NewValueArray is table of varchar2(4000);
nVal_Array NewValueArray;
Begin
Select
DISCOVERYHOSTNAME,
DISCOVERYMACPRIMARYPHYSICAL,
DISCOVERYSERIALNUMBER
into
nVal_Array(1),
nVal_Array(2),
nVal_Array(3)
from ALT_42_Consolidated
where rowid = 'AAEWNEABXAAAAkxAAA';
EXCEPTION
WHEN others THEN
Raise;
End;
=========================================================
I tried using to_number but still the same error.
Can some body please inform me where I am goofing.
Thanks!

I got a different error, but you need to initialise your nval_array and make sure it can hold three values. The following should work:
declare
type NewValueArray is table of varchar2(4000);
nVal_Array NewValueArray := NewValueArray();
Begin
nval_array.extend(3);
Select col1, col2, col3
into nVal_Array(1), nVal_Array(2), nVal_Array(3)
from tab1
where rowid = 'AAAGJZAAGAAAAAWAAV';
EXCEPTION
WHEN others THEN
Raise;
End;
/

How to create dynamic Invoice report based on Tax calculations

Hi Ppl,
I have an invoice report requirement. There are multiple line items in invoice and each line item will have a tax % and discount associated with it. Discount has to be applied at line item level. Tax will be applicable on resultant amount which respect to tax share on total amount. Below is example
Part# Tax     Qty     UnitPrice Amount     Discount     Net Value
1     12.5%     40     10          400          100          300
2     12.5%     50     20          1000          200          800
3     4%     10     30          300          50          250
                         SubTotal                    1350
                         VAT 12.5% on 1100(300+800)     137.50
                         VAT 4% on 250               10
                         Total Amount               1497.5
I have created a static rtf which does all calculations correctly. I have hardcoded 12.5 and 4 % tax values for calculations. But issue is that taxes are changeable in future so I want to create dynamic template which takes care for tax calculations. I thought of to create an array to store distinct tax values from XML data and then to perform calculation but don’t know how to do that.
Can some body help me out as this is very critical and urgent?
Note: Tax calculation can be done at line item level itself but there are some scenarios where additional discounts are there so tax calculation can not be done at line item level.
Below is the sample XML data
<?xml version="1.0" encoding="UTF-8" ?>
- <ListOfBipActionTest>
- <Action>
<AccountId>1</AccountId>
<PartName>17211KCC900LS</PartName>
<TAX>12.5</TAX>
<QTY>40</QTY>
<UNITPRICE>47.06</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>2</AccountId>
<PartName>17213KCC900LS</PartName>
<TAX>12.5</TAX>
<QTY>50</QTY>
<UNITPRICE>19.53</UNITPRICE>
<DIS>8.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>3</AccountId>
<PartName>28302KAG900S</PartName>
<TAX>12.5</TAX>
<QTY>50</QTY>
<UNITPRICE>59.49</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>4</AccountId>
<PartName>2830AKAG900S</PartName>
<TAX>12.5</TAX>
<QTY>10</QTY>
<UNITPRICE>168.7</UNITPRICE>
<DIS>15.00</DIS>
<TaxType>CST</TaxType>
</Action>
- <Action>
<AccountId>4</AccountId>
<PartName>91001GF6000S</PartName>
<TAX>4.00</TAX>
<QTY>60</QTY>
<UNITPRICE>115.34</UNITPRICE>
<DIS>17.00</DIS>
<TaxType>CST</TaxType>
</Action>
</ListOfBipActionTest>
Thanks
Ashish

Dear Efstratios Kara,
I installed SAP Integration Kit 3.1. Yes I installed the integration kit after installing CR.
I have uninstalled the earlier version and i have reinstalled CR with (12.3.0.601) version.
But still i cant view the SAP connectivity. can u tell me from which version they have included this connectivity option in CR.
If CR going to support SAP Table connectivity on specific version, what is that version.
Waiting for your reply.
Regards,
Suman

How to create Dynamic internal table with columns also created dynamically.

Hi All,
Any info on how to create a dynamic internal table along with columns(fields) also to be created dynamically.
My requirement is ..On the selection screen I enter the number of fields to be in the internal table which gets created dynamically.
I had gone thru some posts on dynamic table creation,but could'nt find any on the dynamic field creation.
Any suggestions pls?
Thanks
Nara

I don't understand ...
something like that ?
*   Form P_MODIFY_HEADER.                                              *
form p_modify_header.
data : is_fieldcatalog type lvc_s_fcat ,
         v_count(2)      type n ,
         v_date          type d ,
         v_buff(30).
* Update the fieldcatalog.
loop at it_fieldcatalog into is_fieldcatalog.
    check is_fieldcatalog-fieldname+0(3) eq 'ABS' or
          is_fieldcatalog-fieldname+0(3) eq 'VAL' .
    move : is_fieldcatalog-fieldname+3(2) to v_count ,
           p_perb2+5(2)                   to v_date+4(2) ,
           p_perb2+0(4)                   to v_date+0(4) ,
           '01'                           to v_date+6(2) .
    v_count = v_count - 1.
    call function 'RE_ADD_MONTH_TO_DATE'
        exporting
          months        = v_count
          olddate       = v_date
        importing
          newdate       = v_date.
    if is_fieldcatalog-fieldname+0(3) eq 'ABS'.
      concatenate 'Quantité 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    else.
      concatenate 'Montant 0'
                  v_date+4(2)
                  v_date+0(4)
                  into v_buff.
    endif.
    move : v_buff to is_fieldcatalog-scrtext_s ,
           v_buff to is_fieldcatalog-scrtext_m ,
           v_buff to is_fieldcatalog-scrtext_l ,
           v_buff to is_fieldcatalog-reptext .
    modify it_fieldcatalog from is_fieldcatalog.
endloop.
* Modify the fieldcatalog.
call method obj_grid->set_frontend_fieldcatalog
       exporting it_fieldcatalog = it_fieldcatalog.
* Refresh the display of the grid.
call method obj_grid->refresh_table_display.
endform.                     " P_MODIFY_HEADER

How to create dynamic elements in action of a view?

hi all,
I created 2 buttons dynamically in WdDoModifyView(). I created action1, and parameter for that action i.e, id of type string.
when i click on button1, some ui elements must be displayed.....
can anyone tell me how to dynamically add UI elements in onAction() of view.....
i wrote the following code to create & map dynamically in WdDoModifyView()........
if(firstTime)
    IWDButton b1=(IWDButton)view.createElement(IWDButton.class,"button1");
    b1.setText("Button1");
    IWDButton b2=(IWDButton)view.createElement(IWDButton.class,"button2");
    b2.setText("Button2");
    IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
    tc.addChild(b1);
    tc.addChild(b2);
     IWDButton butt1 = (IWDButton)view.getElement("button1");
     IWDParameterMapping pm1a = butt1.mappingOfOnAction();
     pm1a.addParameter("id1","link1a");
     IWDButton butt2 = (IWDButton)view.getElement("button2");
     IWDParameterMapping pm1b = butt2.mappingOfOnAction();
     pm1b.addParameter("id1","link1b");
after writing this..... in onAction().........of view... i wrote like this...
if (id1.equals("link1a"))
else{
in the if & else condition, i have to create UI elements dynamically.
when i am trying to create Ui elements dynamically, but i am unable to create dynamically here.
pls give me suggestion how to proceed this
regards,
vila

Hi Vila,
Are you trying to create UI elements dynamically in the action? If yes then you won't be able to do so because you can only create UI elements dynamically in WDDoModifyView().
Always WDDoModifyView() would be called after your action. So, you can handle it as you want in your WDDoModifyView() itself.
But if you want that those elements should be created everytime when you fire an event then don't write it within if(firstTime) clause as this would be true only when WDDoModifyView() is called for the first time when the page intially loads.
Regards,
Murtuza

How to create Dynamic Window in Smartforms

Hi all,
Could you please help me out on how to create Dynamic Window in smartforms excluding Main Window.
Thanks in Advance.
Vinay.

hi,
Hi,
1.If you are creating the Different windows for the Countries,then In conditions tab of window specify the Condition i.e.
company -code = '2201'.
2.Then that window can trigger ofr that condition.
3.Other wise, if you are using the different layouts ,then write the condition in Print program and call that form .
reward me if helpful.

How to create a DSN for Oracle Provider for OLE DB in a web server

Dear Guys,
I am a Excel VBA developer.
My requirement is from the Excel I have to call a Stored Procedure with REF CURSOR.
Normally I am using Microsoft ODBC for Oracle Driver for connecting Oracle DB, which is in the Server .
We have users using the Excel reports across the globe.
Sending Excel report is enough, the clients can connect DB from Excel via the DSN created in a web server.
But, I came to know that we can't access the REF CURSOR using Microsoft ODBC for Oracle Driver and it is possible to access by using ORA OLE DB Provider.
I have installed Oracle Client in my machine and tried using ORA OLE DB Provider like below
+con.ConnectionString = "Provider=OraOLEDB.Oracle.1;User ID=user_name;" & _+
+"Password=pwd;Data Source=Oracle;"+
The Excel worked fine in my machine but when I run the same Excel in my user machine in a different country I couldn't connect to DB.
Because the user machine doesn't have Oracle Client installed. We have n number of users across the world and we can't install Oracle client individually.
So, I have the plan of creating a DSN in a web sever as I used for Microsoft ODBC for Oracle Driver.
But, my doubt is how can I create a DSN for accessing ORA OLE DB provider? Is there any driver for ORA OLE DB provider? or is there any alternate solution for my issue?
Can anybody help me on this ASAP?
Thanks & Regards,
Satz

I have created a DSN in a web server (a Public IP machine) that is mapped to a Oracle DB.
In my Excel using VBA coding, with the help of RDO object I will call the DSN in the Web server using the connection string like "DSN=ORS;UID=SDATA;PWD=SDATA;"
This is working fine and in this case the client machine doesn't need Oracle client to be installed or any TNS entry.
The user can run the Excel report by clicking a button and the click event connects the DSN in the web server (through its URL) and routes to the mapped DB and fetches the quried data.
Please note that the above DSN is created based on Microsoft ODBC for Oracle driver.
But the issue is using the Microsoft ODBC for Oracle driver I couldnt call the SP with Ref Cursor.
When I searched in Internet I came to know using the provider oraoledb.oracle we can call SP that uses REF CURSOR.
Now my question is what is the driver name that I can use to create a DSN to make use of the provider oraoledb.oracle for calling the SP with REF CURSOR from Excel VBA coding ?
Appreciate your prompt reply.
Thanks & Regards,
Sathish

Error while creating dynamic Table

Hi All,
I have a node 'SEG' with 3 attributes, ATTR1.2.3, I am tring to crate dynamic table using this context node. Initialy i am displaying view with button, when click on this button i want to create table dynamically.. if click again one more table i have to create.. its giving dump... here is the code... How to do this???
data: wd_node_info type ref to if_wd_context_node_info,
        wd_node type ref to if_wd_context_node,
        lr_container type ref to cl_wd_uielement_container,
        lv_tablename type string,
        lt_db_data type ref to data,
        lr_table type ref to cl_wd_table.
field-symbols: <lt_data> type any table.
wd_node_info = wd_context->get_node_info( ).
wd_node = wd_context->get_child_node( name = 'SEG' ).
lr_container ?= view->get_root_element( ).
cl_wd_matrix_layout=>new_matrix_layout( container = lr_container ).
" Creating internal table with the same structure as our dynamic
context node
CALL METHOD CL_WD_DYNAMIC_TOOL=>CREATE_TABLE_FROM_NODE
    EXPORTING
      UI_PARENT = lr_container
      TABLE_ID = 'MY_TABLE'
      NODE      = wd_node
    RECEIVING
      TABLE     = lr_table.
cl_wd_matrix_data=>new_matrix_data( element = lr_table ).
lr_table->bind_data_source( path = 'SEG' ).
Thanks'
Madhan.

Hi Sarbjeet,
The code is working fine, when i use in wddomodify view method without button click on first time.( I checked this by creating another component). But I am creating dynamic table when click on button(view contains one button initially), for this i created two attributes FLAG OF TYPE wdy_boolean and count of type int1. and in button action i write this code :
DATA lo_el_context TYPE REF TO if_wd_context_element.
    DATA ls_context TYPE wd_this->element_context.
    DATA lv_flag LIKE ls_context-flag.
get element via lead selection
    lo_el_context = wd_context->get_element( ).
get single attribute
    lo_el_context->set_attribute(
        name = `FLAG`
        value = abap_true ).
DATA lv_count LIKE ls_context-count.
get element via lead selection
lo_el_context = wd_context->get_element( ).
get single attribute
lo_el_context->get_attribute(
    EXPORTING
      name = `COUNT`
    IMPORTING
      value = lv_count ).
lv_count = lv_count + 1.
lo_el_context->set_attribute(
    EXPORTING
      name = `COUNT`
      value = lv_count ).
and in wddomodify view method following code..
Method WDDOMODIFYVIEW
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_flag LIKE ls_context-flag.
get element via lead selection
    lo_el_context = wd_context->get_element( ).
get single attribute
    lo_el_context->get_attribute(
      EXPORTING
        name = `FLAG`
      IMPORTING
        value = lv_flag ).
DATA lv_count LIKE ls_context-count.
get element via lead selection
lo_el_context = wd_context->get_element( ).
get single attribute
lo_el_context->get_attribute(
    EXPORTING
      name = `COUNT`
    IMPORTING
      value = lv_count ).
if lv_flag = abap_true. ......
Remaining code same post previously************8
get element via lead selection
lo_el_context = wd_context->get_element( ).
get single attribute
lo_el_context->set_attribute(
    EXPORTING
      name = `FLAG`
      value = abap_false ).
endif.
endmethod...
I created like this i am not getting other UI elements(input, ddbykey,button).
And if i click view button again it going to dump..
Thanks,
Madhan.

Error while creating dynamic internal table.

Hello Expert,
While creating a dynamic internal table, it throw an run time error as :
" LOAD PROGRAM NOT FOUND
CX_SY_PROGRAM_NOT_FOUND"
i tried to debug the program, it found this error comes while calling
CALL METHOD cl_alv_table_create=>create_dynamic_table
please anyone help me out to resolve this problem.
what could be the reason of error? and how to avoid it?
<REMOVED BY MODERATOR>
thanks in advance.
~ shweta.
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 2:41 PM

Hi,
Go through this program.
Report z_dynamic.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,

How to create dynamic panel tree view?

Hello,
I can create dynamic pallete panel without any problems (from sdk/paneltreeview) , but i can't when it's a panel tree view (from sdk/paneltreeview). I don't know how to initialize it. Can i call IID_ITREEVIEWWIDGETMGR's impl directly in ActionComponent to create panel widget? and how?
Thanks in advance.

solved by self

How to create dynamic context based on a structure defined in the program?

Hi Experts,
         I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
            v_carrid TYPE sflight-carrid,
            v_connid TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
         wa_struc type t_type.
data: dyn_node   type ref to if_wd_context_node.
data: rootnode_info   type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baliga

Hi Michelle,
          First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga

How to create dynamic connection in business view manager.

Hi Sir,
Can u explain how to create dynamic connection in business view manager.
Thanks
Vishali Raghava Raju

HI Vaishali,
Can you please elaborate your requirement ?
-Regards
B

How to creater dynamic form in Acrobat 9

Can I make a form that will dynamically add pages (with header and footer) when needed in Adobe Acrobat 9 and if so where is the best documentation on how to do this?

You can dynamically add pages using templates. This requires some relatively simple JavaScript programming. It will work in Acrobat (Pro or Standard) and Reader 11 (Win/mac), but not previous versions of Reader. Here are some links to the Acrobat javaScript reference:
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.1.html
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_Dev_Templates.80.2.html
http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.1216.html
If you don't get a two-paned window with the navigation pane on the left, click "Show Navigation" icon in the upper-left.
If it has to work with previous versions for Reader, Acrobat 9 Pro for Windows comes with the LiveCycle Designer application. With it you can create dynamic XFA forms that can work with Reader.

Automatically create ODBC DSN connection with special port and password. Add-OdbcDsn cmdlet

Hi,
I first posted a question in the SQL forum but I'm posting it here instead because its a Powershell question.
In a non-persitent VDI enviroment we are trying to automatically create a ODBC DSN connection to a SQL server.
We are using Windows 8.1 so we also have Powershell 4 together with the add-odbcdsn cmdlet.
But when trying to add set -SetPropertyValue for network port different than default and a password we get an error.
here is the command:
Add-OdbcDsn -Name test -DriverName "SQL Server" -DsnType User -SetPropertyValue @("PWD=test", "SERVER=10.0.0.1")
and here is the error message:
Add-OdbcDsn : Attempt to set the {UID or PWD} key of a DSN. These keys should not be stored in the registry for securit
y reason. Provide the credential information at runtime via SQLDriverConnect, SQLConnect or SQLBrowseConnect.
At line:1 char:1
+ Add-OdbcDsn -Name test -DriverName "SQL Server" -DsnType User -SetPropertyValue @ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (MSFT_OdbcDsnTask:Root/Microsoft/...SFT_OdbcDsnTask) [Add-OdbcDsn], Cim
Exception
+ FullyQualifiedErrorId : MI RESULT 4,Add-OdbcDsn
NB!: this command does not contain a port number, but when adding it without a password(PWD string) we just the default port.

Hi Primeid,
Agree with Jrv, we cannot store UID and PWD in an ODBC datasource, For example, you can create a DSN using the user interface but if you look at the DSN stored in the registry the UID and PWD are not stored.
ODBC it is always required when you connect using a DSN that the caller supply UID and PWD if they want to use standard login during connection time.
These similar discussion are for your reference:
Creating ODBC DSN for SQL Native
Client fails for not-integrated authentication
is user name and password required in ODBC admin / User DSN?
In addition, to read data from a SQL Server database using an ODBC DSN with SQL Authentication via powershell, please refer to this script:
Open SQL database with ODBC DSN and SQL AuthenticationIf
there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can we create cursor using the table created dynamically

Dear all,
Can we create the cursor using the table which is created dynamically using "Execute immediate" within the same procedure,
or is there any way to call the table created dynamically ..
please Do Help me in this
thanks alot
Edited by: khaja on Jan 18, 2009 10:57 AM

Well, I don't think this approach is bad in any possible circumstances. It depends on the requirements we don't know. Yes, usually applications should not be designed in this way. But 'usually' does not mean 'never'. One possible case is described in Oracle's example Referencing Database Objects that Do Not Exist at Compilation. It's possible to assume that tables inv_01_2003, inv_04_2003, etc from the referenced topic What Is Dynamic SQL? are generated automatically by some job using dynamic create table stmt. If the OP has similar requirements tnen this approach is not bad. It may not be the best one but it at least is not so bad as you said.
I believe that OPs know their requirements much better than me. This is why I always try to answer the exact question. If the approach is really ugly then I don't answer such questions at all.
Regards,
Dima
Message was edited by:
DimaCit

Creating dynamic dsn

Similar Messages

Maybe you are looking for