Creating Eclipse Plugin for BerkleyDB

Hi
I am trying to create a plugin for the BerkelyDB XML for the Eclipse RCP framework (www.eclipse.org). I've installed the window installer version for BerkleyDB XML.
I was wondering what .dll files are required for the jar files or if anyone have done something similar before.

Hi,
You'll need all of the .dll files that are included with the Windows installer, probably including the msv* (C, C++ runtime) libraries.
You shouldn't need anything but the dlls and the jar files.
Regards,
George

Similar Messages

Is there a Bug in Oracle Eclipse Plugin for OSB11gR1PS2

i have been using the Eclipse plugin for Oracle Service bus, and while desiginng the WSDL in ther design view i faced the following problem
If you create a skeleton and then add operations, they are not mapped to WSDL:binding
also if one changes the type of operation, ( from default input output in skeleton) the corrosponding changes are not reflected in WSDl....
did any1 else face the same problem while designing WSDL??
Edited by: tarang on Jun 7, 2011 4:23 PM

Cross post in OEPE forum as well -
Enterprise Pack for Eclipse
Regards,
Anuj

Unable to install Eclipse Plugin for Azure

I am unable to install the Eclipse Plugin for Azure. I have Eclipse Indigo and have installed the Azure SDK 2.3. When I try to add the site http://dl.msopentech.com/eclipse in the Install New Software window I get an authentication pop-up.
When I try my Microsoft ID it fails authentication. The instructions do not mention any authentication. What should I put in here?

Hi,
This plugin requires Azure SDK 2.3. This can be downloaded using the Web Platform Installer (WebPI) at
http://go.microsoft.com/fwlink/?LinkID=252838. However, if you don’t have it installed, when you create your first Azure deployment project, the plugin will automatically install
Azure SDK 2.3.
Also, you could download the sdk from GitHub (https://github.com/MSOpenTech/WindowsAzureToolkitForEclipseWithJava ) and manually install . And you could refer to this blog
(http://java.interoperabilitybridges.com/cloud ).
Please try it.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i create a plugin for adobe in design CS3

i'm trying to make a plugin to use it in adobe Indesign CS3 program but i can't
i'm using Windows 7
i had tryed to make a plugin using Eclips with indesign plugin editor and Visual studio C++ but i can't as i can;t find where can i write my code and there is also an error while debuging is that :
<error PRJ0019: A tool returned an error code from "Performing Custom Build Step">
after working out this error "by adding the directory of Odfrc.exe in tools->VC++ Directories->executable file" another error raise to me :
<Unknown compiler version - please run the configure tests and report the results> and the visual studio raise message box to me to specify the name of the executable file to be used for the debug session
i don;t know wat can i do know all i need to create a plugin for indesign program so could any one help me ??

Each version of the SDK has very specific demands for the compiler setup, and this in turn relies heavily on the operating system. The CS3 SDK probably was based on a much older version of Visual Studio.
Compare your toolchain against the requirements that should be stated somewhere in the CS3 documentation. It's a solid bet you are years ahead -- there simply is no reason for Adobe to keep on supporting all OSes and compilers that continue to appear, for a version of InDesign that's by now 2.5 versions old.

I would like to create a plugin for adobe acrobat pro 9.0...

I would like to create a plugin for adobe acrobat pro 9.0 in order to compare pages, delete the same pages and mark pages from first compared document with new and mark pages from second compared document with original. I downloaded the SDK for adobe 9.0 but now I am not sure how to continue? Do I need Visual Studio or can I use another program that is a freeware? What other program do you recommend? How can I open an .api file in order to see the code? Do I need to place the SDK files in a specific place?

1. You will need Visual Studio. Getting your first plug-in to compile can be an ordeal, be sure to use a sample project and work with it exactly.
2. API files are the work of other programmers. You cannot look inside, and to try to do so is a breach of most software licenses.
3. API files are installed to the Acrobat plug-ins folder.
4. You will not find samples or code to copy/paste. You should be an experienced C/C++ programmer, you should be familiar with the basics of the PDF file format ISO 32000-1, and you should be prepared to read thousands of pages of documentation.

Simulation using Eclipse plugin for JCOP tools

Dear All,
In search for a simulation environment for java card applet development I tried to use Eclipse plugin for JCOP tools.
The samples which comes with the JCOP tools works fine but when try to debug my applet I receive the error: Wrong Data 6A 80.
Generic JCOP v2.4.1 is selected for Java Card Simulation.
Following is the JCOP Shell screen:
cm- /term "Remote|localhost:8050"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B F8 13 00 00 81 31 FE 45 4A 43 4F 50 76 32 34 ;.....1.EJCOPv24
31 B7 1.
IOCTL().
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOPv241"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(908058 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 47 91 92 18 00 00 73 4A 06 07 2A ...n.G.....sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 B1 04 15 2B 41 3F 62 AB 00 .P......+A?b..
(2668 usec)
<= 00 00 F9 02 71 E3 BB AD BD CD FF 02 00 00 3D 02 ....q.........=.
9C 31 C7 89 AD 44 8E 13 17 15 2E 5A 90 00 .1...D.....Z..
Status: No Error
cm> ext-auth plain
=> 84 82 00 00 10 CE 6C DC D2 8C BE 5E 33 EC 58 D0 ......l....^3.X.
57 3A 52 D2 24 W:R.$
(2288 usec)
<= 90 00 ..
Status: No Error
cm> delete -r a00000006203010c04
=> 80 E4 00 80 0B 4F 09 A0 00 00 00 62 03 01 0C 04 .....O.....b....
00 .
(1084 usec)
<= 6A 88 j.
Status: Reference data not found
jcshell: Error code: 6a88 (Reference data not found)
jcshell: Wrong response APDU: 6A88
Ignoring expected error
cm> upload -d -b 250 "D:\JCOP\eclipse\projects\DigitalTachograph\bin\digitaltachograph\javacard\digitaltachograph.cap"
=> 80 E6 02 00 16 09 A0 00 00 00 62 03 01 0C 04 08 ..........b.....
A0 00 00 00 03 00 00 00 00 00 00 00 ............
(2100 usec)
<= 00 90 00 ...
Status: No Error
=> 80 E8 00 00 FA C4 82 84 42 01 00 25 DE CA FF ED ........B..%....
02 02 04 00 01 09 A0 00 00 00 62 03 01 0C 04 11 ..........b.....
64 69 67 69 74 61 6C 74 61 63 68 6F 67 72 61 70 digitaltachograp
68 02 00 21 00 25 00 21 00 0E 00 29 03 3E 00 CD h..!.%.!...).>..
23 D2 01 BB 04 44 00 00 09 E3 4B E5 00 11 00 05 #....D....K.....
01 A2 04 01 00 04 00 29 04 00 01 07 A0 00 00 00 .......)........
62 00 01 02 01 07 A0 00 00 00 62 01 01 02 01 07 b.........b.....
A0 00 00 00 62 01 02 02 01 07 A0 00 00 00 62 02 ....b.........b.
01 03 00 0E 01 0A A0 00 00 00 62 03 01 0C 04 01 ..........b.....
01 DF 06 00 CD 00 00 00 80 00 00 FF 00 01 00 00 ................
00 01 81 03 13 00 12 07 03 00 00 02 01 03 06 0B ................
8C 81 00 00 00 80 00 0B 00 0B 01 01 00 00 0B F9 ................
00 80 00 11 00 0F 01 01 00 10 0E A9 0D D4 0D F7 ................
0E 07 0E 18 0E 26 0E 35 0E 44 0E 50 0E 72 0E 81 .....&.5.D.P.r..
0E 90 0E 9B 0E F5 11 05 11 1A 11 50 00 80 00 05 ...........P....
00 04 01 04 00 01 13 AF 13 B5 13 BA 14 0C 13 00 ................
(6775 usec)
<= 6A 80 j.
Status: Wrong data
jcshell: Error code: 6a80 (Wrong data)
jcshell: Wrong response APDU: 6A80
Unexpected error; aborting execution
I will be very happy if you can help me. I am desperately in need of a working debugging environment.
Thanks in advance!
Kind regards,
Mehmet

     * Processes incoming READ_BINARY APDUs. Returns data of the currently
     * selected file.
     * @param apdu   where the offset is carried in header bytes p1 and p2.
     * @param le expected length by terminal
     * @return length of the response APDU
    private short processReadBinary(APDU apdu, boolean protectedApdu, short leUnprotected) {
        if (!hasFileSelected()) {
            ISOException.throwIt(SW_CONDITIONS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);     // offset encoded in P1/P2, 15 lowest bit
        // offset encoded in P1/P2, 15 lowest bit
        // check if le != 0 <-- no response expected
        if (leUnprotected == 0) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
        if (selectedFile == null) {
            ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
        if ((selectedFile.getAccessConditions() & READ_REQUIRES_SM) == READ_REQUIRES_SM) {
            if(!protectedApdu)
               ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        short fileSize = (short) selectedFile.getFileLength();
        // check offset
        if (offset >= fileSize) {
            ISOException.throwIt(ISO7816.SW_INCORRECT_P1P2);
        // check expected length
        if ((short) (offset + leUnprotected) > fileSize) {
            ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            //ISOException.throwIt(SW_TAMAM);
        short bufferOffset = 0;
        crypto.setEncryptionStatus(isSelectedFileEncrypted());
        if (protectedApdu) {
            bufferOffset = crypto.getApduBufferOffsetDT(leUnprotected);
            if(isSelectedFileEncrypted())
               bufferOffset = crypto.getApduBufferOffset(leUnprotected);
            apdu.setOutgoing();
        Util.arrayCopyNonAtomic(selectedFile.getData(), offset, buffer, bufferOffset, leUnprotected);
        return leUnprotected;
     * Processes and UPDATE_BINARY apdu. Writes data in the currently selected
     * file.
     * @param apdu
     *            carries the offset where to write date in header bytes p1 and
     *            p2.
    private void processUpdateBinary(APDU apdu, boolean protectedApdu) {
        if (!hasFileSelected() || isLocked()) {
            ISOException.throwIt(ISO7816.SW_COMMAND_NOT_ALLOWED);
        if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_ALW) != DigitalTachograph.UPDATE_ALW) {
            if ((selectedFile.getAccessConditions() & DigitalTachograph.UPDATE_REQUIRES_SM) != DigitalTachograph.UPDATE_REQUIRES_SM) {
                ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
                return;
            }else if(!protectedApdu){
                    ISOException.throwIt(ISO7816.SW_SECURITY_STATUS_NOT_SATISFIED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short offset = Util.makeShort(p1, p2);
        short readCount = (short) (buffer[ISO7816.OFFSET_LC] & 0xff);
        //if (!protectedApdu){
            readCount = apdu.setIncomingAndReceive();
        while (readCount > 0) {
            selectedFile.writeData(offset, buffer, OFFSET_CDATA, readCount);
            offset += readCount;
            readCount = apdu.receiveBytes(ISO7816.OFFSET_CDATA);
    private short processInternalAuthenticate(APDU apdu , boolean protectedApdu) throws CryptoException {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (KID_LENGTH * 2)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Check if VU.CHR maches the one of the selected certificate on the card
        if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + KID_LENGTH), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, Rnd1, (short) 0, (short) 8) != (short) 8) { // Receive Rnd1
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        // Hash(PRnd2||K1||Rnd1||VU.CHR)
        random.generateData(PRnd2, (short) 0, (short) 90);
        random.generateData(K1, (short) 0, (short) 16);
        crypto.shaDigest.update(PRnd2, (short) 0, (short) 90); // PRnd2
        crypto.shaDigest.update(K1, (short) 0, (short) 16); // PRnd2||K1
        crypto.shaDigest.doFinal(buffer, OFFSET_CDATA, lc, digest, (short) 0); //Rnd1||VU.CHR
        BigNumber mod = new BigNumber((short) 128);
        mod.init(keyStore.Card_PubMod, (short) 0, (short) keyStore.Card_PubMod.length, BigNumber.FORMAT_HEX);
        mod.subtract(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        if (mod.compareTo(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX) == -1) {
            mod.toBytes(signed, (short) 0, (short) 128, BigNumber.FORMAT_HEX);
        // To be added: if the selected private key is considered corrupted, the processing state returned is '6400' or '6581'.
        signed[0] = (byte) 0x6A;
        Util.arrayCopyNonAtomic(PRnd2, (short) 0, signed, (short) 1, (short) 90);
        Util.arrayCopyNonAtomic(K1, (short) 0, signed, (short) 91, (short) 16);
        Util.arrayCopyNonAtomic(digest, (short) 0, signed, (short) 107, (short) 20);
        signed[127] = (byte) 0xBC;
        if (!keyStore.cardPrivateKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaSigner.init(keyStore.cardPrivateKey, Signature.MODE_SIGN);
            crypto.rsaSigner.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (!keyStore.selectedPublicKey.isInitialized()) {
            CryptoException.throwIt(CryptoException.ILLEGAL_VALUE);
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Cipher.MODE_ENCRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short) signed.length;
    private void processExternalAuthenticate(APDU apdu) {
        short equipmentType = 0;
        if (keyStore.Selected_Cert != null) {
            equipmentType = (short) keyStore.Selected_Cert.CHA[6]; // check equipment type
        if (equipmentType != (short) 1 && equipmentType != (short) 2 && equipmentType != (short) 3 && equipmentType != (short) 4 && equipmentType != (short) 6) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED); // Instead of 6F00 throw a more meaningfull SW in case CHA is not valid.
        if (Util.arrayCompare(keyStore.Selected_Cert.CHA, (short) 0, TACHOGRAPH_AID, (short) 0, (short) 6) != 0) {
            ISOException.throwIt(ISO7816.SW_FUNC_NOT_SUPPORTED);
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        short lc = (short) (buffer[OFFSET_LC] & 0xFF);
        if (lc != (short) (128)) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        if (apdu.setIncomingAndReceive() != lc) {
            ISOException.throwIt(ISO7816.SW_WRONG_DATA);
        Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, signed, (short) 0, (short) 128); // receive the cryptogram from the VU
        // decrypt the encrypted message with the card private key
        try {
            crypto.rsaCipher.init(keyStore.cardPrivateKey, Cipher.MODE_DECRYPT);
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        // verify the signature with the VU public key
        try {
            crypto.rsaCipher.init(keyStore.selectedPublicKey, Signature.MODE_VERIFY); // Cipher.MODE_ENCRYPT
            crypto.rsaCipher.doFinal(signed, (short) 0, (short) 128, signed, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
        if (signed[0] != (byte) 0x6A || signed[127] != (byte) 0xBC) {
            ISOException.throwIt(Util.makeShort(signed[0], signed[127]));
        try {
            verifyCardCertificates();
            Util.arrayCopyNonAtomic(signed, (short) 1, preDigest, (short) 0, (short) 106); // accumulate preDigest
            Util.arrayCopyNonAtomic(Rnd3, (short) 0, preDigest, (short) 106, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(keyStore.Card_Cert.CHR, (short) 0, preDigest, (short) 114, (short) 8); // accumulate preDigest
            Util.arrayCopyNonAtomic(signed, (short) 91, K2, (short) 0, (short) 16); // receive K2 value
            crypto.shaDigest.update(signed, (short) 1, (short) 106); // PRnd4||K2
            crypto.shaDigest.update(Rnd3, (short) 0, (short) 8); // Rnd3
            crypto.shaDigest.doFinal(keyStore.Card_Cert.CHR, (short) 0, (short) 8, digest, (short) 0); //||Card.CHR
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        if (Util.arrayCompare(signed, (short) 107, digest, (short) 0, (short) 20) != 0) {
            ISOException.throwIt(SW_TAMAM);
        volatileState[0] |= MUTUAL_AUTHENTICATED;
        try {
            DTUtil.xor(K1, (short) 0, K2, (short) 0, KaKb, (short) 0, (short) 16);
            Util.arrayCopyNonAtomic(Rnd3, (short) 4, SSC, (short) 0, (short) 4); // tail of Rnd3
            Util.arrayCopyNonAtomic(Rnd1, (short) 4, SSC, (short) 4, (short) 4); // tail of Rnd1
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM);
        try {
            keyStore.setKey_Ka(KaKb, (short) 0);
            keyStore.setKey_Kb(KaKb, (short) 8);
            keyStore.setSecureMessagingKeys(KaKb, (short) 0, KaKb, (short) 0);
        } catch (Exception e) {
            ISOException.throwIt(SW_TAMAM_DEGIL);
        return;
    private short returnPreDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(preDigest, (short) 0, buffer, (short) 0, (short) 122);
        return (short)preDigest.length;
    private short returnDigest(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(digest, (short) 0, buffer, (short) 0, (short) 20);
        return (short)digest.length;
    private short returnOriginalText(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        apdu.setOutgoing();
        Util.arrayCopyNonAtomic(signed, (short) 0, buffer, (short) 0, (short) 128);
        return (short)signed.length;
    private void processVerify(APDU apdu) { // Verify_CHV(Pin_Ws)
        byte[] buffer = apdu.getBuffer();
        // retrieve the PIN data for validation.
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        // the PIN data is read into the APDU buffer
        // at the offset ISO7816.OFFSET_CDATA the PIN data length = byteRead
        if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead) == false) {
            ISOException.throwIt(SW_VERIFICATION_FAILED);
        return;
    private void processPSO(APDU apdu) { // verify certificate
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        short lc = (short) (buffer[ISO7816.OFFSET_LC] & 0xFF);
        if (p1 == (byte) 0x00 && p2 == P2_VERIFYCERT) {
            if (lc != TACHO_CERT_LENGTH) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_LENGTH);
            try { // copy the certificate to be verified from APDU buffer to cert object
                Util.arrayCopyNonAtomic(buffer, OFFSET_CDATA, cert, (short) 0, lc);
            } catch (Exception e) {
                ISOException.throwIt(SW_TAMAM);
            if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {
                keyStore.VUCA_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else if (Util.arrayCompare(keyStore.selected_KID, (short) 0, keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {
                keyStore.VU_Cert.verifyCert(cert, keyStore.selectedPublicKey, keyStore.selected_KID);
            } else {
                ISOException.throwIt(SW_CERT_VERIFICATION_FAILED); // Selected keyId, with MSE, is neither ERCA_KID nor VUCA_KID
        } else {
            ISOException.throwIt(SW_CERT_VERIFICATION_FAILED);
        return;
    private short processGetChallenge(APDU apdu, boolean protectedApdu) {
        byte[] buffer = apdu.getBuffer();
        byte p1 = (byte) (buffer[OFFSET_P1] & 0xff);
        byte p2 = (byte) (buffer[OFFSET_P2] & 0xff);
        if (p1 != 0 || p2 != 0) {
            ISOException.throwIt(SW_WRONG_P1P2);
        random.generateData(Rnd3, (short) 0, (short) 8);
        short Le = apdu.setOutgoing();
        if (Le != (short) 8) {
            ISOException.throwIt(SW_WRONG_LENGTH);
        Util.arrayCopyNonAtomic(Rnd3, (short) 0, buffer, (short) 0, (short) 8);
        return Le;
    private void processMSE(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        if (buffer[OFFSET_P1] == (byte) 0xC1 && buffer[OFFSET_P2] == P2_DST) {
            short lc = (short) (buffer[OFFSET_LC] & 0xFF);
            if (lc != (short) (KID_LENGTH + 2)) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            if (apdu.setIncomingAndReceive() != lc) {
                ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            if (buffer[OFFSET_CDATA] != (byte) 0x83) {//check the tag of the data
                ISOException.throwIt(SW_SECURE_MESSAGING_DATA_OBJECTS_MISSING);
            } else if (buffer[OFFSET_CDATA + 1] != (byte) 0x08) {
                ISOException.throwIt(SW_INCORRECT_DATA_OBJECT); // check if the key is already selected one
            } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.selected_KID, (short) 0, KID_LENGTH) != 0) {
                if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.ERCA_KID, (short) 0, KID_LENGTH) == 0) {// KID is EUR_KID
                    keyStore.selected_KID = keyStore.ERCA_KID;
                    keyStore.selectedPublicKey = keyStore.eurPublicKey;
                    keyStore.Selected_Cert = null; // ERCA public key is selected
                    return;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VUCA_Cert.CHR, (short) 0, KID_LENGTH) == 0) {// KID is MSCA_KID
                    keyStore.Selected_Cert = keyStore.VUCA_Cert;
                } else if (Util.arrayCompare(buffer, (short) (OFFSET_CDATA + 2), keyStore.VU_Cert.CHR, (short) 0, KID_LENGTH) == 0) { // KID is VU_KID
                    keyStore.Selected_Cert = keyStore.VU_Cert;
                } else {
                    ISOException.throwIt(SW_REFERENCE_DATA_NOT_FOUND);
                }// KID not found
                keyStore.selectedPublicKey = keyStore.Selected_Cert.publicKey;
                keyStore.selected_KID = keyStore.Selected_Cert.CHR;
            } else { // if the KID is already set, just return
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
    private void processSelectFile(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        short lc = (short) (buffer[OFFSET_LC] & 0x00FF);
        // retrieve p1p2 from apdu buffer
        byte p1 = buffer[OFFSET_P1];
        byte p2 = buffer[OFFSET_P2];
        short p1p2 = Util.makeShort(p1, p2);
        apdu.setIncomingAndReceive();
        if (p1 == 4) {
            if (lc == (short) TACHO_AID_LENGTH) {
                if (Util.arrayCompare(buffer, (short) OFFSET_CDATA, TACHOGRAPH_AID, (short) 0, (short) TACHO_AID_LENGTH) == 0) {
                    selectedFile = fileSystem.getDT();
                    fileSystem.selectDT();
                    volatileState[0] |= FILE_SELECTED;
                    return;
                } else {
                    ISOException.throwIt(ISO7816.SW_WRONG_DATA);
            } else if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getDT();
                fileSystem.selectDT();
                volatileState[0] |= FILE_SELECTED;
                return;
        } else if (p1 == 2) {
            if (lc != 2) {
                ISOException.throwIt(SW_WRONG_LENGTH);
            short fid = Util.getShort(buffer, OFFSET_CDATA);
            if (fileSystem.getFile(fid) != null) {
                selectedFile = fileSystem.getFile(fid);
                volatileState[0] |= FILE_SELECTED;
                return;
        } else {
            ISOException.throwIt(ISO7816.SW_WRONG_P1P2);
        setNoFileSelected();
        ISOException.throwIt(ISO7816.SW_FILE_NOT_FOUND);
    public static void setNoFileSelected() {
        if (hasFileSelected()) {
            volatileState[0] ^= FILE_SELECTED;
    public static boolean hasFileSelected() {
        return (volatileState[0] & FILE_SELECTED) == FILE_SELECTED;
    public static boolean hasMutuallyAuthenticated() {
        return (volatileState[0] & MUTUAL_AUTHENTICATED) == MUTUAL_AUTHENTICATED;
    static boolean isLocked() {
        return (persistentState & LOCKED) == LOCKED;
    public boolean isSelectedFileEncrypted() {
        return ((selectedFile.getAccessConditions() & DigitalTachograph.ENCRYPTED) == DigitalTachograph.ENCRYPTED);
}

Eclipse Plugins for Servlets and JSP.

Hi Guys,
Can any one suggest where i can get the eclipse plugins for Servlets and JSP. May i am wrong posting this question in this forum. I already browsed thru all the forum to get the info but in vain. so any help will be appreciated.
Thank You,
cheers,
thrinath.j

[url http://www.eclipse.org/webtools/]http://www.eclipse.org/webtools/
Regards

I am created a plugin for VCO. but, i do not see in inventory. where i need to be look into?

i am created a plugin for VCO. but, i do not see in inventory. where i need to be look into?

How did you install your plugin?

Help creating Proxy Plugin for an Ad SWC

I'm trying to create a plugin for an ad component, where ad video playback is all handled in a SWC.
I took the OSMSPlayer example, and modifed the constructor to load my plugin using the players factory object, and once loaded, I continue with the player setup and configuration. There doesn't seem to be a problem here, everything loads fine.
I then proceeded to create a proxy plugin.
Within ProxyElement, when set proxyElement is called, I create a SerialElement, and add the passed mediaElement as the first child of the SerialElement.
I then add a loadTrait to the proxyElement, and listen for the LoadEvent.LOAD_STATE_CHANGE event. When this is fired, I insert a MediaElement (preroll), which has a PlayTrait, DisplayTrait, TimeTrait and AudioTrait, as the first child of the proxied serialElement, and call play. The preroll video plays fine, i hear audio and see the time updates in the player, but the video is not visible. If I then pause the video, it suddenly appears, and is visible for the remainder of the clip. Once the preroll is complete, the orginal mediaElement plays fine.
I followed the MASTPlugin example, as I am trying to do something similar, except my video playback is handled via a SWC (added to the DisplayTrait). If I just insert a plain VideoElement as the preroll and load a flv it plays fine, so its something specific to my MediaElement impl, but I can't figure out why it doesn't display until I hit pause.
Any help would be greatly appreciated, I've already burned hours trying to figure this out.
Also, looking at the use case chart below, I probably actually need to create a reference plugin. Does anyone have an example of a reference plugin?
http://help.adobe.com/en_US/OSMF/1.0/Dev/WSc6f922f643dd2e6d-12f30d7b1262b59cb0d- 7ffe.html

The behavior you're describing sounds like a bug -- if you can post a small, self-contained example that reproduces the problem, that would be
very helpful.
You might also want to look at DurationElement and SWFElement. When you wrap the latter in the former, you can display a SWF but augment it with the ability to play, pause, have a duration, and seek. The ExamplePlayer sample app has at least one example showing how to use this (I think it's called "Timed Image" and uses ImageElement rather than SWFElement, but the approach is the same).
As for reference plugins, the ControlBarPluginSample (+ ControlBarPlugin) is a good example of a reference plugin. This sample shows how you can load and display the player chrome dynamically from a plugin.

Eclipse plugin for version 10.3

Is there eclipse plugin for weblogic 10.3

Yes, you can install Oracle Enterprise Pack for Eclipse.
[http://www.oracle.com/tools/enterprise-eclipse-pack.html]
[http://www.oracle.com/technology/software/products/oepe/index.html]

Eclipse plugin for ejbgen

Hi,
Does BEA have a eclipse plugin for ejbgen to use?
Thanks
brian

I have used Doclipse plugin with Eclipse3.1 and found it very useful to generate all weblogic specific annotations. Please check out this http://www.beust.com/doclipse/.

Eclipse Plugin for SAP MII

Good afternoon everyone.
I am beginner and I've been reading about the eclipse plugin for SAP MII.
And I was with some doubt someone could help me?
1) This plugin is paid?
2) With the plugion I can have all the features that the SAP MII Workbench?
3) How can I get this plugin?
Thank U.

Hi Carlos,
It should be available on your eclipse through this menu:
I have tried to find it but it's not available. This could be due to many reasons but I think it could be that:
a) I'm running Eclipse Luna so it might be possible that it is not listed because I'm using an unsupported version.
b) I don't have the correct marketplace in my list of available marketplaces and I should add the correct one. This one doesn't look likely but I can't tell for sure.
c) It has been discontinued and is no longer available for download in which case we won't be able to find it.
If I find out what the problem was I'll let you know.
Kind regards,
Ibai

Eclipse plugin for flex

Hi,
Is there any Flex plugin for Eclipse which has features like
syntax coloring, auto-suggestion and compilation for
actionscript and mxml. I tried using ASDT but it isn't of much
help. It supports only syntax coloring. Writing action script code
in plain editor is sometimes a very big pain.
Thanks,
Ashish Abrol

You can download the Eclipse plugin for Flex in the Adobe
Website. Then in Eclipse you have to configure the editor's section
and select the mxml and as extensions to be edited with the Flex
plugin, that way you will have syntax coloring and
auto-suggestion

Eclipse Plugin for debugging apps on the WebSphere Application Server 5.0

Does anyone know about an Eclipse plugin for the debugging of the applications deployed on the WebSphere Application Server 5.0 like JBOSS-IDE for jboss???
Any info would be highly appreciated.
Thanks

There is a new JBoss project with the aim to provide a world class IDE for JBoss. Its first release contains the debugging and monitoring of JBoss servers and the controlling of there life cycles as well as a very comfortable and sophisticated support for XDoclet.
You can visit: https://sourceforge.net/projects/jboss/ for the download.
Hope this helps,
Nectarios Tsolakis

Eclipse Plugins for Glue

Dear All,
Can any one provide me the link frow where i can get the Eclipse plugin for Glue. Thanks in advance.
Your's,
Hari

Google probably could, if such a thing exists. Did you try "glue eclipse plugin" as your search keywords?

Creating Eclipse Plugin for BerkleyDB

Similar Messages

Maybe you are looking for