Creating email address using Microsft exchange 2003 server

Hi. Have a MacBook Pro 2008. I need to add my new company email and we are having trouble creating it on my Macbook Pro. The pepole here only use PCs and they have a Microsoft exchange 2003 server. They are suggesting I buy Microsoft Office for Mac because of Outlook? Is this the only solution or is there another one? Thanks.

I'm not using IMAP. I've tried that before. This time around I'm using the Exchange Account connection. I recall seeing where you could select to delete email from the server with IMAP, but I can't find the same or similar setting in the Exchange settings.

Similar Messages

  • Exchange 2003 server email

    The company I work for uses MS Exchange 2003 Server for its email.  iPhone with either iOS 4 or iOS 5 does fine synching with Exchange 2003.  I would like to access my work email on my Mac.  Microsoft says that the only way to do this is to buy MS Office 2008 Home Business Version, and as far as I can tell, this is correct.  Does anybody know of a workaround, perhaps syncing my email from iPhone to Mac.  Thanks.

    KiltedTim wrote:
    My bad. I seem to recall, though setting up mail to talk to our Exchange 2003 server before we migrated over to Exchange 2010 this year. My memory of the timing must be off.
    There's always OWA in a pinch.
    Not for Exchange 2003 users, /OWA came in with 2007 sp1 and all that, before that it was /exchange. Everyone is dropping support for E2003, even Microsoft (see Outlook 2011), Entourage is actually a good client, different, but better than it looks. You can also use 3rd party connectors, DavMail is a common choice but I found it close to incomprehensible, and then unreliable (especially with contacts)

  • NO INCOMING POP MAIL from exchange 2003 server.-

    My university uses a exchange 2003 server for mail and pop access is enabled on all professor accounts. Since a couple of weeks ago I had no problem at all with my university mail account on apple mail, although I had to use :
    incoming mail server: "mail.myuniversity.edu.do"
    user: "DOMAIN\username"
    Password: "mypassword"
    Authentication: Password
    After december the 5th I'm not getting any mail at all, even thou the activity monitor says "incoming messages.... 83 of 83" but no message shows up on the inbox. I have noticed that the number keeps growing (84, 85, 86...) but still no message in my inbox.
    the weird thing is that I'm able to see my university mail in my iphone using the synced account settings in Itunes. I thought it was a problem of my machine I have made a clean format and reinstall of osX 10.6 with the 10.6.2 combo update. I did not transfered files nor configuration, just copied my documents and reconfigured mail from scratch. I did not imported any message. After all that, the problem persist.
    I have used Connection Doctor and everything looks ok. The Detail window shows this:
    ******************************** BEGIN OF LOG ********************************
    CONNECTED Dec 25 20:37:28.201 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    CONNECTED Dec 25 20:37:28.216 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    READ Dec 25 20:37:28.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (SvrMailAdm.rsta.pucmm) ready.
    WROTE Dec 25 20:37:28.656 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    USER RSTA\sterlingjimenez
    READ Dec 25 20:37:28.682 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    220 mail.pucmm.edu.do Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at Fri, 25 Dec 2009 20:38:10 -0400
    WROTE Dec 25 20:37:28.695 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    EHLO [10.0.1.33]
    READ Dec 25 20:37:29.012 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    +OK
    WROTE Dec 25 20:37:29.019 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    PASS ***********
    READ Dec 25 20:37:29.030 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    250-mail.pucmm.edu.do Hello [200.88.1.167]
    250-TURN
    250-SIZE
    250-ETRN
    250-PIPELINING
    250-DSN
    250-ENHANCEDSTATUSCODES
    250-8bitmime
    250-BINARYMIME
    250-CHUNKING
    250-VRFY
    250-X-EXPS GSSAPI NTLM LOGIN
    250-X-EXPS=LOGIN
    250-AUTH GSSAPI NTLM LOGIN
    250-AUTH=LOGIN
    250-X-LINK2STATE
    250-XEXCH50
    250 OK
    WROTE Dec 25 20:37:29.036 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    AUTH LOGIN
    READ Dec 25 20:37:29.391 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    +OK User successfully logged on.
    WROTE Dec 25 20:37:29.397 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    QUIT
    READ Dec 25 20:37:29.436 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    334 VXNlcm5hbWU6
    WROTE Dec 25 20:37:29.447 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    UlNUQVxzdGVybGluZ2ppbWVuZXo=
    READ Dec 25 20:37:29.823 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:110 -- socket:0x115c88b70 -- thread:0x115c74d30
    +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 signing off.
    READ Dec 25 20:37:29.927 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    334 UGFzc3dvcmQ6
    WROTE Dec 25 20:37:29.954 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    READ Dec 25 20:37:30.410 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    235 2.7.0 Authentication successful.
    WROTE Dec 25 20:37:30.425 [kCFStreamSocketSecurityLevelNone] -- host:mail.pucmm.edu.do -- port:25 -- socket:0x116e81d40 -- thread:0x116e6f3d0
    QUIT
    ******************************** END OF LOG ********************************
    Can Anyone HELP ?
    I'm Out of ideas.
    Best Regards,
    Sterling Jiménez R.

    Hello metalcraft,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X Mountain Lion: Cannot connect to Exchange server in Mail after upgrading
    http://support.apple.com/kb/TS4363
    If you have issues connecting to the Exchange server or don't know what server addresses to use, contact your Exchange administrator or IT administrator.
    Best of luck,
    Mario

  • HT5312 I no longer have access to the email address used as my Apple ID and when I choose to answer security questions, my DOB had to have been originally entered incorrectly because it keeps failing.  How do I get rid of my old Apple ID and create a new

    I no longer have access to the email address used as my Apple ID and when I choose to answer security questions, my DOB had to have been originally entered incorrectly because it keeps failing.  How do I get rid of my old Apple ID and create a new one?

    Contact Apple, either through the link in that article or by phoning them. Alternatively, just create a new Apple ID; previous iTunes Store purchases won't be transferred to it.
    (79271)

  • SAP Internet Mail Gateway for MS Exchange 2003 Server

    Hi,
    Has anybody successfully configured the IMG to work with MS Exchange 2003?
    We have our 4.6C currently configured to talk to Exchange 2000 through SXC
    Note 594428 - SXC: Exchange 2003 Server is not supported 
    Solution
    R/3 Basis Release 3.1I to 4.6D:
    Use IMG 4.6D and sendmail instead of the SXC (see note 101573), or
    Upgrade your SAP system to Web Application Server (WAS) 6.10 or later and then use the SMTP plugin.
    We only use outbound mail from SAP and this is sent to intranet users only, we are not planning on upgrading for a at least a year and would like to avoid installing another mail server.
    Note 363154 - Internet mail gateway: use other MTA than Sendmail 
    This note suggests that any MTA (Mail Transfer Agent) can be used so long as it can be called from the command line, Exchange is an MTA, anybody now how to do a command line call for Exchange?
    I have read the documentation
    http://help.sap.com/saphelp_46c/helpdata/en/0c/39c93589c5ab53e10000009b38f839/frameset.htm
    Jasper

    hi,
    we are in the process of configuring the Internet Mail Gateway on R/3 4.6c on Unix platform.
    I have created the RFC Destinations in SM59 and also checked the Test Connection and its working fine. I then did the Unix configuration and went on to the check whether the configuration was successful in SO01 by sending a sample text message to my company's mail address. but i did not recieve any mails on my Microsoft Outlook, instead the count under the errors column increased by one.
    on checking the status for the sent message in SO01, its saying "No Delivery to [email protected](for reason, see long text)... but there's no long text either...
    Can anyone please let me know the reasons for it and it would also be really helpful if someone can let me know whether i have missed any configuration settings.
    Also, can someone send the list of parameters that are to be entered for the Unix configuration under mlsomadm mailgw.ini, so that i can verify whether i have entered the parameters correctly....
    Kindly revert back at the earliest...
    Thanks & Regards
    Manicks

  • Changing the Default OAB from an Exchange 2003 server to an Exchange 2010

    I am in the process of decommissioning my old Exchange 2003 servers. All mailboxes have been moved over to Exchange 2010. I already have OABs and Public Folders created on the Exchange 2010 servers. Since I see the "Default Offline Address List",
    which is pointing to my old Exchange 2003 server and the Default OAB is set to "True", can I just make an existing Exchange 2010 OAB the "Default OAB"? I have read that I have to perform a move on the "Default Offline Address List"
    OAB. Is this required?
    thanks
    Noe

    Configure the Exchange 2010 mailbox databases to use the Exchange 2010 OAB, and leave the Exchange 2003 databases alone.  You can delete the old OAB just before taking the Exchange 2003 servers out of production.  The "Default" setting
    means the OAB is the one that's assigned by default when you create a new mailbox database, so yes, you should set that.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Trying to recover a mailbox from an old Exchange 2003 server

    I still have a 2003 server in my environment but all functions and mailboxes are on Exchange 2010. The only reason the 2003 server is still around is for the off chance of requiring a restoration which has now come up. I have successfully restored a
    mail store to a recovery storage group but I am unable to export mailboxes from it using exmerge.
    I get the following error:
    [10:16:16] Copying data from mailbox 'Jacques Legare' ('LEGARE') on Server 'MAIL-SERVER' to file 'C:\TEMP\LEGARE.PST'.
    [10:16:16] Error opening message store (MSEMS). Verify that the Microsoft Exchange Information Store service is running and that you have the correct permissions to log on. (0x8004011d)
    [10:16:16] Errors encountered. Copy process aborted for mailbox 'Jacques Legare' ('LEGARE').
    I have read many, many articles regarding the requirement for “send as” permission. I have granted send as permissions to several different domain accounts and local accounts on the Exchange server but I get the same result with all of them.
    It looks like the problem may be because the mailbox no longer exists on the Exchange 2003 server.
    So what do I have to do to recover this mailbox? Can I create a mailbox for this user on the 2003 server without messing up his the mailbox on the 2010 server? Instead of restoring to the recovery storage group, should I restore and overwrite the original mailbox
    store? Again, will that mess up anything with the 2010 server?

    0x8004011d is permission related Error.
    Refer to the link below and download EXMERGE guide which has complete procedure documented.
    https://gallery.technet.microsoft.com/office/Guide-to-Use-Exmerge-to-fd00af49
    If the mailbox that need to be restored has to be extracted from RSG is already moved to Exchange 2010 then you will not be able to run exmerge against it.
    You might have to update the attribute MsExchOrigMDB on the RSG to point to Exchange 2010 Database where the mailbox is now located.
    even this information is enclosed in the EMERGE Guide.
    Revert back for any queries/outcome.
    Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
    question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

  • Installing certificate for access to exchange 2003 server

    My exchange server requires that a certificate be installed to enable remote access. Since the iPhone does not support disk mode like the iPod there appears to be no way to install the certificate. Are there any workarounds?
    iPhone Windows XP

    Whole migration from Exchange 2003 server to Exchange 2010 server has been done and applied 3rd party SSL certificate on Exchange 2010 servers also.
    Hi,
    According to your description, everything about exchange 2010 is ready.
    Why don't you follow the mail flow as below?
    Internet Emails > Ironport > Exchange 2010 (smart host) > Exchange 2003 servers
    Please refer to the following article:
    Move Internet Mail Flow from Exchange 2003 to Exchange 2010
    Configure mail flow by using one of the methods listed below depending on the needs of your organization. This will enable Internet message flow through your Exchange 2010 Hub Transport servers.
    Configure Internet Mail Flow Through Exchange Hosted Services or an External SMTP Gateway
    Configure Internet Mail Flow Directly Through a Hub Transport Server
    Remove the SMTP connector in Exchange 2003 that is used to handle Internet mail. Your account needs to be a member of the local administrators group and a member of a group that has had the Exchange Administrators role applied at the administrative group
    level.
    In Exchange System Manager, expand the Organization node, expand
    Administrative Groups, expand <AdministrativeGroupName>, expand
    Routing Groups, expand <RoutingGroupName>, and then select
    Connector.
    In the right-hand pane, right-click the connector you want to delete and select
    Delete.
    Click OK to confirm the deletion.
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • I have an I pad2, an iMac desktop and an I phone 5, how do I get them all to be bale to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Ay help gratefully received !!

    I have an I pad2, an iMac desktop(2012) and an I phone 5, how do I get them all to be able to face time with each other, do I need different email addresses, use the phone number, or the sim number in the iPad ? Any help gratefully received !!

    Graham,
    For the iPad, iMac you need to create verifyible e-mail addresses created with one of the providers such as Yahoo, Gmail,etc.  For the iphone you should use it's phone number, but an e-mail could be used for it too.  If you want to associate these e-mail addresses with a single ID, I'm including a link to give you info about how you can do that. Read it carefully, as it can be a bit confusing.
    http://support.apple.com/kb/HE68

  • How can i change the name in imessage from the full email address used as apple id on ipod touch?

    I used my full email address to create an apple id - but on imessage it uses my apple id as my name as sender + i dunno how to change it so ppl dont get a messsage showing my full email address!
    Can anyone help?

    Open the Contacts app. List All Contacts and find the email address used by iMessage. Select the email address and tap the Edit button in the top right corner. Add your name to the top two lines. Tap Done.

  • Email address used for registration deleted

    We purchased adobe acrobate pro 10 a couple of years ago. My secretary registered the software from her email address. She has since left the company and her address has been deleted. I have a new computer and can't download the software because the email address used for registration no longer valid! I have the serial numbers and license certificate. Can anyone help me.
    Thanks,
    Peter

    I am not sure what your organization arrangements are but I would think you could recreate the email address so that it can be used.  I know that I can create subaccounts for my own email service.
    Aside from that, you might be able to download the trial version of the software directly thru the site linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    http://prodesigntools.com/tag/ddl

  • Hello, I used to in the old firefox synchronized without an email address, using the id

    Hello, I used to in the old firefox synchronized without an email address, using the id, so now it is impossible, how can sinhronizirovatsya having the id, password and Sync Key?

    Hello,
    Provided you are running the latest version of Firefox on all of your devices and computers, you can sign in with a Firefox account . All you need is an email and password, the sync key is no longer required. Simply click on the menu button (3 bars) and click '''Sign in to Sync'''. If you don't already have one, you can create a Firefox account on that page. To add additional devices, log in with the account you just created.
    Note: If you don't see Sign in to Sync, you are signed in with your old account and need to follow the steps in [[How to update to the new Firefox Sync]].
    See:
    * [[How do I set up Firefox Sync?]]

  • Removing the last Exchange 2003 server from an Exchange 2010 organization

    We're in the process of decommissioning our last Exchange 2003 server, I have proceeded through the steps in the Microsoft guide on how to do this and have deleted both the Mailbox and Public Folder stores, removed the RUS policies for Domain and Enterprise.
    All mailboxes and public folders are now homed on the new Exchange so nothing resides on the old Exchange 2003 server.
    I have today inserted the Exchange 2003 media into the Exch 2003 server and chosen the remove action, but it keeps telling me;
    'The component "Microsoft Exchange Messaging and Collaboration Services" cannot be assigned the action "Remove" because: - One or more users currently use a mailbox store on this server.
    I checked the server by searching ADUC and also checked this KB article http://support.microsoft.com/kb/279202 and nothing shows up.
    I also checked this article on someones blog but no such luck http://smtp25.blogspot.co.uk/2007/04/having-trouble-to-uninstall-exchange.html
    However someone made a comment that the used an ADSIedit query (&(objectCategory=user)(msExchHomeServerName=*)) however I am unsure how to do this in ADSI.
    Any advice would be gratefully received.
    Thanks!

     
    Fantastic post ... thank you so much!
    I found three active directory users account using that search which never had a mailbox assigned to them.  I removed the exchange attributes from each account and the uninstall proceeded
    flawlessly!

  • Is it possible to customise the email address used to send iCal invites?

    Hi,
    I am trying to find out if it is possible to customise the email address used by iCal to send an invite.
    i.e. each user would like their email address to be used rather than a generic one.
    Tks
    Ben

    Sorry, that isn't possible. The email address is used as the account name. If you need to change it, a new account would need to be created.

  • I cannot send email - error message as follows : 'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk.' I can send email from other apple devices, and the email settings are identical. Any ideas?

    For some reason I cannot send email - all was working fine, but now I get the following error message when I try to send email:
    'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk'
    I can receive incoming mail ok and I can send email from other Apple devices. The problem seems confined to my Mac Book Pro.
    Ant ideas?

    Hello there, Pablo639.
    The following Knowledge Base article offers up some great steps for troubleshooting mail issues on your Mac:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for