Creating Employee for MSA

Dear Colleagues,
Got stuck with the follwing, please do help...
I have installed the MSA client and now wanted to create the user for login to MSA. When go to SMOEAC --> selected Employee -->, but create, display, change button is disabled. So not able to create the new employee. Even default MSA users are also not visible (there are no users).
Did I miss something? Please do respond.
Regards
Milind

Hi,
There are two conditions that need to be satisfied for logging into a mobile client. The user must exist as an entry in the table smousers and smomitabt.
Please check if the entries are available in both these tables in the CDB. If not, then try downloading the BUPA_MAIN object from CRM to CDB.
Once you get the data to CDB in the above tables, please create a subscription using publication "User by Employee" and the condition that the USER_WRITE segment with segment field SFAMITABT and the SFAMITABT app. field of SMOUSERS application table match the user that you want as a login.
Subscribe the same to the site and conntrans it. You should see the table entries in the mobile client. Please let me know if you still have problems.
Also, please note that you cannot create Employees in Admin Console what so ever. Once you make the BP as an employee in txn. BP this is visible in the Admin Console and you can modify but not create.
Hope this helps.
Regards TVS

Similar Messages

SUS :- Employee for vendor

Hello Folks,
We are implementing SRM SUS (5.0) (EBP SUS scenaio). We are able to successfully replicate vendor to SUS. We can se ethe vendor org in SUS. My concern is -
1. How can we create employee for vendor (business partner) in SUS.
2. When we create employee for vendor in EBP (BBPMAININT) and replicate in the vendor to SUS, in the vendor org- contact person in SUS there is a node getting created. But unfortunately this shows userid ABCSDFEW and shows name 'DO NOT USE'. And we are not able to login with this userid.
Please help.
Thanks,

Thanks,
1. I tried to change password in SU01 and when I try to login in SUS with that information it says 'your coampany is locked please contact administrator to unlock the company'. I tried it with 3-4 vendor and those are locked. Now how I can unlock those company (Vendor).
2. I also try to use SUS_SELFREG url (my assumption is that for self reg we dont need any userid/passwd becuase the url will direct you to the user creation page .... please correct if I am wrong) but it gives the below error -
The following error text was processed in the system QXS : Name or password is incorrect (repeat logon)
The error occurred on the application server qx1xidb_QXS_21 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: BBP_SUS_USER_CHECK_REPLICATION of program SAPLBBP_SUS_ROLE
Method: ONINPUTPROCESSING of program CLO236ERN0NKC9F306R926UTBE9V5CP
Method: %_ONINPUTPROCESSING of program CL_O236ERN0NKC9F306R926UTBE9V5CP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
3. My concern is that why I am not able to create vendor user as a purchaser role in SUS. I am getting the above ( in my 2nd post) error. What could be the problem .
Please suggest.
Thanks,
Prahsant

Creating Employee in HR Module for ESS

Hi Everybody,
I am developing ESS application, i successfully deployed business packages for ESS and created required system objects and JCo destinations, and i able to see overview page of ESS Application. The problem is i get struck up at creating new employees in R3 system, once i create employee i can assign to existing user in R3. so please anybody guide me how to Hire an Employee (creating new Employee) in the R3 System. Encourage points will be given to the useful postings.
thanks in advance
regards
samba

Hi Everybody,
I am developing ESS application, i successfully deployed business packages for ESS and created required system objects and JCo destinations, and i able to see overview page of ESS Application. The problem is i get struck up at creating new employees in R3 system, once i create employee i can assign to existing user in R3. so please anybody guide me how to Hire an Employee (creating new Employee) in the R3 System. Encourage points will be given to the useful postings.
thanks in advance
regards
samba

Needed validation when creating user for employee in HRUSER transaction

hi All,
I wanted to put validation in HRUSER TCode when we are creating user for an employee by selecting exit module for user name and password
in my scenario I want to remove the first alphabet of user name that is P and with that I want to set a default password can anyone suggest me includes.
Please find the attached snap.

Solved it for myself
refer the link:
Dear all,
Regards,
Siva

Any bapi available for Create Employee Trip

hi ,
please tell me for Create Employee Trip any bapi is available.
if it is there means please tell me.

Check this one -
BAPI_TRIP_CREATE_FROM_DATA
Regards,
Amit

Error in creation of Employee for Business Partner

I am using SRM 4.0 and ECC 5.0. I have created Vendor Root Org EBP and replicated vendors from R/3 which is appearing in Vendor Organization in EBP.
Now when I am trying to create Employee as contact person in thru WEB transaction in EBP "Manage Business Partner".
After filling all mandatory info when I am saving the same and error popup is coming as given below:
"Central system not reached"
Can some body help analyze the same?
Thanks
Sanjay

Hi Vadim,
Following attributes are already maintained for Vendor Root in Org Plan :-
BUK
BWA
CUR
ITS_DEST
SYS
VENDOR_ACS
VENDOR_SYS
Beside this I have checked up availability of replicated vendors in VENMAP table with GUID.
First error message is coming:
"Central system not reached"
When I am defining Logical system and external business partner ID that is R/3 Supplier code than another error is coming :
"BP role BUOP001 already exists for partner XXX"
This XXX is running sr. no. of BP number range but do not appear in BP data base . And in next attempt next Sr. no. is blocked by system.
Problem is still persisting pls. suggest.
Sanjay

How can I book an employee for a training program from PD?

HI One and All,
Hope all of you Doing well...
I configured Personal Development and Training Event Management.
When I go for Profile Match-up, I found that One employee is lack-off some skills. I have a training program to fill those skills. How can I book that employee for training program from Pofile match-up screen?
Or is there any other way to book an employee for a training program from PD?
Thnaks,
Potru,

Hi Priya,
Thanks for your response, I check the option Generate training Praposals before running the profile match-up. I have created one training Event type (D) and i assigned qualification through A-028 relation.
Here one employee is lack of MS Office excellent skills for Assistant Manager position, I created Training Event (D) called MS Office training and assigned the qualification for this training program.
when I run profile match-up I got an Icon Training praposal (Tree symbol).
and also I have a column called Training , but it is blank.
I want to book that employee for that training progam (MS offcie training program), from Profile match-up screen.
I have selected the employee and I click on the Icon called Further Training. But the message is like Choose a valid line.
How can I send employee for MS Office training from profile match-up screen?
Please guide me...
Thanks,
Potru.

Error while creating Employee in 11i

Hi All,
I am using Oracle applications 11i in my PC for trying purpose in Windows 2003 environment. I have HRMS in my APPS. While creating Employee in US HR manager >
I am getting the following error message.
App-Per-52803 Business Group Does Not Match Security Profile
For this i got resolution from Metalink, as per metalink:
HR:Business Group and
HR:Security Profile
Both are same profile options. I have checked in profiles both are set to Vision corporations. But i am getting same error still. Could any one please suggest me.
Thanks,
RED.

RED,
I am not aware of any other solution that could be helpful here. However, I suggest you review the following note and see if it helps.
Note: 205502.1 - HRMS Security Implementation Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=205502.1
If the above note is irrelevant here, please log a SR.
Regards,
Hussein

Creating subtype for Infotype.

Hi ,
I have created a customInfotype following the steps below:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
In thread Infotype the following method is given to create subtype for Infotype.
<b>Subtype Creation :</b>
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
But I am having no option to create subtype from PM01.
Please guide on this.
Thanks&Regards
Ananya
Message was edited by:
Ananya Mukherjee

Hi,
What you are trying to do is to modify a Standard ( delivered by SAP ) object. This would obviously not be allowed all that easily. You will have to contact SAP and obtain what is known as an access key. You would then be able to modify the object. This stipulation makes it explicit that SAP is not responsible for any problems that you may encounter by changing the standard functionality.
There is, however, an exception to this. We have something called user-exits in sAP. These are the places in the code where SAP has given the customer an option to include some custom functionality within the standard functionality. That is because SAP thinks that these are the points where customer-specific functionality is most likely.
Hope you can now see the point. If you want to modify PM01, you have to either search if an appropriate user-exit is available, or you have to contact SAP to obtain the access key.
<b>Reward points</b>
Regards

Need help in creating documents for Contacts in Oracle HRMS

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

We are trying to add documents to Contacts in Oracle HRMS. (11.5.10.2)
Navigation: Oracle HR Super User -> Fastpath -> Documents of Record
Search for a Contact -> Manage Documents of Record -> Create Document of Record.
In Document Information -> Type is mandatory field but the LOV is not returning any values.
The LOV works fine for both system defined and custom document types when trying to create documents for Employees or External Contractors.
But we would need to be able to add documents for Contacts also.
Please let us know if this expected functionality or if there is any setup that is needed.
Any help in this regard is highly appreciated.
Thanks,
Kiranmayi.

Report to find total absences of all the employees for 2006

we have to find the total absences of all the employees for the year 2006. is there any good report to do this job

If u wnt absence data then u can create query in SQ01.
or
Hope thts wht u wanted ,pls change the code accordingly as per ur need,just refer it as demo code -
REPORT ZGILL_ABSDATA                           .
tables: pa2001.
data: begin of itab occurs 0,
      Pernr like pa2001-pernr,
      Subty like pa2001-subty,
      begda like pa2001-begda,
      endda like pa2001-endda,
      ABWTG like pa2001-ABWTG,
      KALTG like pa2001-KALTG,
      end of itab.
start-of-selection.
select pernr subty begda endda abwtg kaltg from pa2001 into table itab
where begda ge '20060101' and
endda le '20061231'.
if sy-subrc eq 0.
write:/2 'Emp No',
       12 'Abs Type',
       18 'Start Date',
       28 'End Date',
       40 'Abs Days',
       50 'Calen Days'.
loop at itab.
write:/2 itab-pernr,
       12 itab-subty,
       18 itab-begda,
       28 itab-endda,
       40 itab-abwtg,
       50 itab-kaltg.
clear itab.
endloop.
else.
message i000(000) with 'No data found'.
endif.

Problem in Creating Employee as a supplier in backend by AP supplier

Hi friends,
Im facing issue in creating Employee as a supplier in backend through AP supplier interface, as im getting the below error like
Employee_id is invalid and Employee info is invalidThis is the codings that i followed to perform that interface, but it didnt worked it seems.
DECLARE
L_VENDOR_REC_TYPE AP_VENDOR_PUB_PKG.R_VENDOR_REC_TYPE;
L_SUP_SEQ number;
L_MSG_COUNT NUMBER;
L_MSG_DATA VARCHAR2 (4000) := '';
L_RETURN_STATUS VARCHAR2 (1);
L_VENDOR_ID AP_SUPPLIERS.VENDOR_ID%TYPE;
L_PARTY_ID NUMBER;
BEGIN
SELECT AP_SUPPLIERS_INT_S.NEXTVAL INTO L_SUP_SEQ FROM DUAL;
L_VENDOR_REC_TYPE.VENDOR_NAME := 'Terrence Schreiber';
L_VENDOR_REC_TYPE.EMPLOYEE_ID := 18;
-- L_VENDOR_REC_TYPE.segment1 := 18;
L_VENDOR_REC_TYPE.VENDOR_TYPE_LOOKUP_CODE := 'EMPLOYEE';
L_VENDOR_REC_TYPE.INVOICE_CURRENCY_CODE := 'INR';
L_VENDOR_REC_TYPE.PAYMENT_CURRENCY_CODE := 'INR';
L_VENDOR_REC_TYPE.TERMS_NAME := 'N30';
L_VENDOR_REC_TYPE.VENDOR_INTERFACE_ID := L_SUP_SEQ;
-- l_vendor_rec_type.party_id := 6487;
AP_VENDOR_PUB_PKG.CREATE_VENDOR (
P_API_VERSION => 1.0,
P_INIT_MSG_LIST => FND_API.G_FALSE,
P_COMMIT => FND_API.G_FALSE,
P_VALIDATION_LEVEL => FND_API.G_VALID_LEVEL_FULL,
X_RETURN_STATUS => L_RETURN_STATUS,
X_MSG_COUNT => L_MSG_COUNT,
X_MSG_DATA => L_MSG_DATA,
P_VENDOR_REC => L_VENDOR_REC_TYPE,
X_VENDOR_ID => L_VENDOR_ID,
X_PARTY_ID => L_PARTY_ID
commit;
DBMS_OUTPUT.put_line ('Vendor Return Status ---> ' || L_RETURN_STATUS);
DBMS_OUTPUT.put_line ('Vendor Message Count ---> ' || L_MSG_COUNT);
DBMS_OUTPUT.put_line ('Vendor ID --->' || L_VENDOR_ID);
DBMS_OUTPUT.put_line ('Party ID --->' || L_PARTY_ID);
IF L_MSG_COUNT = 1
THEN
DBMS_OUTPUT.put_line ('Vendor Message Data ---> ' || L_MSG_DATA);
ELSIF L_MSG_COUNT > 1
THEN
FOR I IN 1 .. L_MSG_COUNT
LOOP
DBMS_OUTPUT.put_line(I || '. '
|| SUBSTR (
FND_MSG_PUB.GET (
P_ENCODED => FND_API.G_FALSE
1,
255
END LOOP;
END IF;
END;
Also i referred for the above error in the metalink with the following ID, that also dint worked
[ID 1400877.1
[ID 977651.1 ]Can friends, anyone help me to solve this problem.
Thanks
Brgds,
Mini

Hi
Navigation: Supplier > Entry > Create Supplier > Employee Name
Responsibility: Payable Manager
Regards
Senthilkumar C
Edited by: Senthilkumar Chellamuthu on Jul 24, 2012 3:16 PM

To Create employee master data.

Hi,
How to create employee master data from scratch in SAP-HCM through BAPI's. Then we need to insert data in infotype 0000, 0001 and 0002 for that employee.
Thanks in advance.
Regards,
Rajesh Kumat

first check, if customizing for all fields is done.
You will need a action type for hiring a person with infotypes 0000, 0002, 0001.
Infotype 0001 is not so easy, because many checks are done in modul pool.
The number range for PERNR can be set to internal or external (its your decision), transaction PA04.
if you create a new PERNR you may wish to keep the old (legacy) one. you can use infotype 0032 or 0105, add it to the hiring action.
If your legacy data comes with a flat file LSMW is a good tool to import master data.

Creating Employee Group and subgroup in OM

Dear Viewers,
I am new in this SAP, I have started learning SAP HR / HCM. Presently I am learning OM and creating Organisational Structure.
Can anyone help me in giving examples to create employee group and employee subgroup categories.
Thanks & Regards,
Soujanyah

HI Swapnil,
Thank you for the link.
I have got a sample by searching in google
[http://www.laccd.edu/hr/Documents/HRGuide_H-300_EmployeeSub-Group.pdf]
Can I get some other samples please as specified in that table as EG and ESG

Create Employee code with the mix of alphabets & numeric

Hai,
Is there any possibility to create Employee code with the mix of alphabets & numeric instead of the system generated employee code in employee master data? If so, pls explain.
Any suggestion is appreciated.
Thanks,
Parvatha Solai.N

Hi Solai,
You can do a work around for it. Just Leave the Employee ID field as it is. Create a new User Defined field (Alpha Numeric Type) And make it visible on the the employee master data form.
Step2 : Depending upon your need write the code that is if it should be auto generated write the code for else leave it blank for the user to enter the employee code.
Step3: In before action = True. Make the newly created field as mandatory and check whether the value in the field is unique.
Refer Route Class. Hope you understand
Regards,
P. Anand
Edited by: Anand peter on Jan 2, 2012 11:59 AM

Creating Employee for MSA

Similar Messages

Maybe you are looking for