Creating Enhancement Implementation for the Enhancement spot in ECC 6.0

Hi All,
I have an urgent requirement of creating an Enhancement implementation for the existing Enhancement Spot in ECC 6.0 ..
I never worked on enhancement in ECC 6.0.
There is an existing enhancement spot called "ES_SAPLIQS0" in the package " IWOC". which has got three existing implementations
1. DI_ROT_SAPLIQS0
2. ISU_SAPLIQS0
3. DIMP_GENERAL_SAPLIQS0
I need to create another implementation for the same enhancement spot.. Please let me know the detailed procedure to create the enhancement implementation for the same spot..
Thanks-
Shrikant
useful answers will be rewarded.

First of all find out the include program where you want to write the logic.. Click the spiral button to go to enhancement mode.. then click on Edit > Enhancement operations> Show implicit enhancement points.
This will hightlight all the enhancement points in your include program. Right click on exact enhancement point and select Enhancement Implementations --> Create,, It should give you the same Enhancement spot you are talking about. select that and write the code.. This code will be automatically appear in the same enhancement spot. You can see one more Enhancement implementation in the same Enhancement spot from the transaction code se19.
Hope my explanation is clear, if you have any doubts, send me a mail at [email protected]
All the best.
Shrikant

Similar Messages

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Reg: How to Create Enhancement spot in $TMP Package

Hi All,
i had seen so many eLearning concepts which sap provided to demonstrate the ENHANCEMENTS Topic,But in that they are using the Enhancement Spots which already created in $TMP Package,So To learn this concept i am trying to create the Enhancement Spots in $TMP , But it is not allowing me to create in $TMP and it's showing the error message like Enhancements can create in only 'SAP' Packages only,So if i will create in SAP Packages it is allowing,
But i would like to create Enhancement Spots in $TMP Package,So it would be appriciable any one could help me regarding this.
Thanks in Advance
Srihasa...

Thanks Rasheed for your quick response, i tried from the SE 38 To create Enhancement Spots in the $TMP Package,But it's not allowed me,Can you tell the way how to create the Enhancement Spots in the $TMP Package i mean is there any other Tcodes are available to create the Enhancement Spots.
Thank you..
Srihasa

Step by step procedure to create Enhancement spots, points and sections

Hi all,
Can anyone of you please provide a step by step procedure to create Enhancement spots, Enhancement points and Enhancement Sections and also give a brief explanation about the same ?
Regards,
Pramod

Hi Pramod,
The enhancement spots are used to manage explicit enhancement options. Enhancement spots carry information about the positions at which enhancement options were created. One enhancement spot can manage several enhancement options of a Repository object. Conversely, several enhancement spots can be assigned to one enhancement option.
Use
You create an explicit enhancement option when processing a Repository object with the relevant tool by creating an enhancement spot element definition at a point where this is possible. This enhancement option can then be called at different points using enhancement spot element calls. The enhancement spot element definition and the corresponding enhancement spot element calls make up the definition of an enhancement option. For example, when editing an ABAP program with the ABAP Editor, you can define explicit enhancement options in the form of the ENHANCEMENT-POINT statement, which also represents the element definition and element call.
Each enhancement spot element definition must be assigned to at least one enhancement spot. For this, an enhancement spot element definition is assigned one or more simple enhancement spots, which in turn are assigned to at least one composite enhancement spot. Simple and composite enhancement spots are Repository objects that form a tree-like structure, where the leaves and branches represent simple and composite enhancement spots respectively. A simple enhancement spot is always assigned to exactly one enhancement technology (ABAP source code enhancement or BAdI).
Composite enhancement spots are used for the semantic grouping of simple enhancement spots. A composite enhancement spot contains either one or more simple enhancement spots and/or one or more composite enhancement spots of the relevant type. You can use composite enhancement spots to combine simple enhancement spots into meaningful units.
The statement ENHANCEMENT-POINT can either be entered directly or created by choosing Edit → Enhancement operations → Create enhancement in the Enhancement Builder.
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

Creating portal desktop for the user

Hi All-
Please help me out...
1) Could you let me know the detailed procedure ( if possible please provide screen shots) to create "Portal Desktop for the user".
2)Suppose we developed a webDynpro Application and we need to make it Role Based access....please let me how to achieve this..
3)Help me out in creation of "Roles" in Portal Content Development and the steps to assign pages to "Roles"
Regards,
Cris

Hi Cris,
Follow these links for the required info.
Creating Portal Desktop for specific user
Portal Branding for specific user
Creating Roles & worksets
http://help.sap.com/saphelp_nw04/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm
Integrating webdynpro in portal
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/2fffe990-0201-0010-aab0-e61c3250bcf3
Hope I am helpful.
Cheers,
Santhosh

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Save Query - An error occurred while creating connection strings for the query

A workbook trying to edit and reload I get the following error "Save Query - An error occurred while creating connection strings for the query" No Power Pivot data model or anything.

I am getting the same error when editing a Power Query in an Excel spreadsheet. It happens when I change a Group By step to do a Sum instead of Count Rows.

How to create a validation for the project coding mask

Hi,
Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
How can we go about this?

Hi Jacquiline Bersamin,
You can use validation with the combination of the level and the coding mask.
In the validation:
Pre requisite: WBS level = 1
Validation: Prps-posid = prps-posid :1-12:
Message : Error
If required you can give the parameters for your detail error message.
Please let me know if this does not work.
Thanks
Regards
Srinivasan Desingh

How to create a password for the pdf file

In Adore Acrobat XI, how to create a password for the file? The help states going to Tools Menu and clicking on Protection tab - but there is no such option. In the file - properties - security screen, it shows the security details but does not allow to edit it.

I think you may be mixing up two different products: Adobe Reader (free), and Acrobat ($$).

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

What version of GB is needed to open .band files created in GB for the iPad. I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?

jerryfromtorrance wrote:
What version of GB is needed to open .band files created in GB for the iPad.
6.0.2
jerryfromtorrance wrote:
I am running GB '08 on my desktop PPC G5 with OS X 10.5.8, so I can't go to GB '11. Any solution?
although i ran GBX6 under 10.5.8, i do believe an intel processor is required. that means that the only complete solution would be a new computer, i'm afraid.
the best you could do is export each track as an audio file from GBi and drop them into your GBX project

How to create a playlist for the movies I have?

Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.

Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone.

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

How to create a matchcode for the list of Customers "Group key" KNA1-KONZS

Hi All,
with reference to the creation of "Group key" KNA1-KONZS for Customers,
I'd like to know if is possible to create a matchcode for the list of Customers "Group key" created.
Thanks
Gandalf

Hi
MAINTAIN THE GROUP KEY IN GENERAL DATA ---CONTROL DATA SCREEN
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.
KNA1-KONZS
Cya
udayakumar

HOW TO CREATE SEVERAL folder for the generation and READING FILE

HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez Salazar

I hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2    fhandle utl_file.file_type;
3 begin
4    fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5    utl_file.put_line(fhandle , 'eygle test write one');
6    utl_file.put_line(fhandle , 'eygle test write two');
7    utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2    fhandle   utl_file.file_type;
3    fp_buffer varchar2(4000);
4 begin
5    fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7    utl_file.get_line (fhandle , fp_buffer );
8    dbms_output.put_line(fp_buffer );
9    utl_file.get_line (fhandle , fp_buffer );
10    dbms_output.put_line(fp_buffer );
11    utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdump
SYS                            EXP_DIR                        /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
SYS                            UTL_FILE_DIR                   /opt/oracle/utl_file
SYS                            BDUMP_DIR                      /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM

Creating Enhancement Implementation for the Enhancement spot in ECC 6.0

Similar Messages

Maybe you are looking for