Creating entry in table COSS

Hi All,
I want to create an entry in table COSS..
if any transaction please tell me....
or any other ways....
Please help me...
Thnx
Rohit

Hi All,,
What i found is that for creating records in COSS we can use KP06 transaction...but with cost Element with Secondary cost element categories ....ie 21,31 42, 43,etc
then only it will creates entry in COSS....
Till now this is my finding.....
if u have another way plz let me know....
Thnx
Rohit

Similar Messages

  • Create entry for table FILENAMECI

    Hi,
    I want to create physical file path for my logical file in table FILENAMECI.
    The problem is this table allows maintenance with restriction the I cannot maintain through SE16 or SM30 (for V_FileName).
    Please let me know how can I create new entry for this table.
    Thanks,
    Khanh

    Use view V_FILENACI!
    Thread close!

  • Creating entry in table:T001L

    Hi All,
      I want to create new record in table:T001L(storage locations). Its a customizing table.
    I tried with Utilities->table contents->create new entries but the system giving error " create data processing function module"
    I tried another with way: T.code: SM30->Table/view: T001L-> maintain. Here also I am getting same message.
    Then I went to tcod:SE54 and regenerated function module for function group ZARO.
    Again its giving same message. How can i enter new record into table?
    Regards,
    kalandar

    Hi,
    It is configuration table.
    Go to sm30, enter the table name.
    Click on customizing button.
    It's a config table, so maintain in through customizing.
    In the popup window select Materials Management Definiton and enter.
    In the new window, click on execute on Maintain storage location.
    There you need to mention the plant, under which you want to maintain storage location.

  • Creating entry in table OIGSVMQ

    Dear All,
    I am working as SD/IS-OIL consultant and new to working in this Shipment notification-reservation-shippment scheduling cycle (MM/IS-OIL) . I am facing this problem where the shippments which I am creating are having some missing information in Tcode Z4D3 (Report to list and print bulk shipment). After doing some analysis, I found that it's this table OIGSVMQ which needs to have an entry for the shipment in order for Z4D3 to pick all the relevant data for the shipment. I think somewhere I am missing some customization. Can someone help me in finding what exactly needs to be done and where.
    Thanks
    Vikram
    Edited by: Vikram Saigal on Feb 20, 2009 10:58 AM
    Edited by: Vikram Saigal on Feb 20, 2009 11:03 AM

    Hi,
    Your report should be using the delivery and shipments table .  You can google these tables, link it with your SD tables to retrieve the required information for your bulk shipments.
    zccr

  • Create entry in Internal Posting table COSS

    Hi All,
    I want to create an entry in table COSS..
    Please help me...
    Thnx
    Rohit

    You can enter data Programatically but it is not a correct approach.
    Create a Table maintenance Generator to for table COSS to make an Entry.
    follow below steps
    1) go to se11 check table maintanance check box under
    attributes tab
    2) utilities-table maintanance Generator->
    create function group and assign it under
    function group input box.
    also assign authorization group default &NC& .
    3)
    select standard recording routine radio in table
    table mainitainence generator to move table
    contents to quality and production by assigning
    it to request.
    4) select maintaience type as single step.
    5) maintainence screen as system generated numbers
    this dialog box appears when you click on create
    button
    6) save and activate table
    OR.
    Check Tcode for the COSS table and Use BDC.
    Regards,
    Gurpreet

  • Checking the initiality of the fields while creating  entries for a table

    While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events?
    I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of table maintenance generator. Both of cases i have to change the TMG which is generated by SAP system. I want to know is there a way to achieve this with out changing the TMG possible events?

    hi rahul,
    as far as i know, you have to do your initial valifdation in TMG and you have to change your TMG. However, if you have checked the initial flag while defining the field, you will not have initial value for that particular field.... (if the field is key field, by default it is not initial)
    hope this helps....
    thanks and regards,
    tanmaya

  • Regarding tables coss and cosp

    Hi Experts,
    In table AUFK there is object number field against order and against that object number there are lot of entries in tables coss and cosp.
    I need to know from which transaction these entries get updated and also can we come to know from these entries in tables coss & cosp, whether the order is newly entered or changed or any other operation happen on that order??
    Thnx..

    I can explain the costing frame work behind the Production order /Internal order.
    For all the items and Item types (material, service, Employee, Variable items ) based on Production order/Internal order Objnr( Object number) Cost estimate number will be generated (KALNR) .
    B       Base Planning Object
    E       Internal Activity   
    F       External Activity   
    L       Subcontracting      
    M       Material            
    N       Service             
    P       Process (Manual)    
    T       Text Item           
    V       Variable Item
    then all the items will be posted against the OBJNR and KALNR.
    Create the costing component for each item type using the function module
    KKDI_OBJECTS_CREATE_FROM_RES
    CL_COST_ESTIMATE is the class behind all the costings.  for behind each item type different class will be there for costing.  using cost estimate object all the Items will be inserted ( INSERT_COMPONENT method is responsible) .
    after that  calculation will happen using the calculate method of cl_cost_estimate ,then save_temporarily
    finally cl_cost_estimate=>commit_all
    Once it is commited then CKIS , COSP, COSS data will be updated from the items..
    i hope it is very vague for you.

  • I am receiveing error while creating Z table: Entry in table TAORA missing

    Hi Experts,
    I am receiving "Entry in table TAORA missing" while creating Z table.
    Please help
    Edited by: N_niki on Jun 11, 2011 9:22 AM

    Hi
    1) Check for the DB System. The Table name in  "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
    2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
    Regards
    Gopu

  • Error "No entry in table T589A for P" while creating new Infotype

    HI,
    I've created a new infotype (9605). All the tables, structures, screens etc. have been created using transaction PM01 successfully. But upon execution of Infotype from PA30, the infotype screen is displayed with the following error:
    "No entry in table T589A for P"
    Any input will be highly appreciated.
    Thank you,
    Farooq.

    Hi Farooq,
    Untill and unless the the field PSYST-IOPER is cleared explicitly in the program MP960500 (in PBO modules), this error should not occur.
    Also is this error is coming only for 9605 infotype ? Also is any other info availaible in the error message such as entry in table t589a is not available for which value of OPERA (INS, MOD, DEL, LIS etc) ?
    Regards,
    Shrinivas

  • Error "No entry in table T551A" while creating set work schedule rule.

    Dear Team,
    I am getting following error while creating set work schedule rule.
    Error "No entry in table T551A" for key 22 BBB [ here BBBB is my period work schedule]
    The actual prob is i configured all the necessary steps but when i tried to create work schedule rule im getting this error. Also, in the same screen there is one field DWS grouping initially value in this is 00 and gread mode. But after giving ES grp, holiday calander ID etc etc when i try to save that screen that value is chainging to 22 from 00.
    My ES grop=2 and PS grop=2 . Is that value is my ES and PS grouping..?? or some other thing.
    Request you to please help me out.
    Regards
    Shab.

    HI, there are 8 steps you need to do below:
    1. Group Personnel Subareas for the Daily Work Schedule
    2. Group Personnel Subareas for the Work Schedule
    3. Define Break Schedules
    4. Define Daily Work Schedules
    5. Define Period Work Schedules
    6. Define Employee Subgroup Groupings
    7. Define Groupings for the Public Holiday Calendar
    8. Set Work Schedule Rules and Work Schedules
    All of them belong to TIME MANAGEMENT. I think you miss some steps above.
    Please check it again.
    Regards!
    Minh

  • How to create Infotype entry in table T777D

    Hi All,
    We have undergone Upgrade from 4.6C to ECC 6.0.
    Now we get an error while maintaining certain data infotype 0122 does not exists.
    I looked at the entries in table T777D in both the system. In older system the entry is there but not in the new system.
    When i tried creating the entry in this table the error comes 'Module pool program MP012200 is not present'. This program was there in 4.6C but is not there in ECC 6.0.
    How do we genrate this program or how do we create the entry for this infotype to correct the error.
    Is there any customizing settings that is required?
    Please advice.
    Regards,
    Vidya.

    Look at OSS [Note 546167 - Termination in PA10: Infotype 0122 does not exist|https://service.sap.com/sap/support/notes/546167]
    >Symptom
    >
    >When you edit the master data (transaction PA10) after you upgrade Release 4.6C to Release 4.70 or higher, a termination occurs and an error message is issued informing you that infotype 0122 does not exist.
    >
    >Other terms
    >
    >No entry in table T777D
    >
    >Solution
    >
    >In the 'Infotype attributes (Customizing)' view (extended table maintenance for view V_T582A), delete the entry for infotype 0122.
    >In the 'Infotypes - country-specific settings' view (extended table maintenance for view V_T582L), delete the entry for infotype 0122.
    Regards

  • Unable to create new entry in table that has no primary key

    Hi
       I have a table which is required to have no primary key (except mandt). After i generate table maintanance, when I go to create new entries, the table control to enter the new values does not appear. When I click on edit->new entries, it goes back to the fields tab of the table. Same when i check through SM30.
    If i maintain atleast one primary key, I am able to get the table control in new entries screen. However the requirement permits no primary keys except mandt. How can this be resolved?
    Thanks
    NM

    Hi,
    THE PROBLEM WITH UR TABLE IS
    YOU HAD DECLARED MANDT AS THE PRIMARY KEY AND THERE IS NO OTHER KEY IN UR TABLE
    iT'S NOT ALLOWING YOU TO ADD NEW ENTRIES BECAUSE MANDT IS THE ONLY PRIMARY KEY IN YOUR TABLE AND IT WILL HAVE A DEFAULT VALUE BASED ON THE CLIENT. SO  IT'S NOT SHOWING YOU THE CREATE NEW ENTRIES OPTION.
    SO TRY TO PUT ONE MORE FIELD AS THE PRIMARY KEY SO THAT YOUR PROBLEM WILL SOLVE VERY EASILY  ALSO MAKE SURE THAT TABLE IS ACTIVATED.
    REVERT IF U NEED SOME MORE HELP
    Thanks &Regards.
    Pavan.

  • After creating a customizing database table 'create entries disable'

    After creating the database table i want to add fields through goto-table contents-create entries but "create entries" is in disable mode how can i resolve this?

    Dear Dileep,
    You need to go to "Delivey and Maintainence" tab there you will "Data Browser/Table Maintainence",
    Here you need to select "Display/Maintainence Allowed" in the drop down list.
    Thie will help to find the "create entrie enable".
    Thanks,
    Ananth.

  • What is the procedure to create entry in NAST table for particualr document

    Hello ABAP GURUS,
    I need to know how to create objectkeys in NAST table for particualar document number.
    My requirement is i need to check my smartform output for Goods Receipt.IN nast table,i dont have any entries for Goods Receipt.So i need to create entries in NAST table.Please help me to solve this problem.
    waiting for your replies
    Regards
    Maruthi

    Hi!
    Ususally it is not neccessary to create manual entries in NAST.
    You have to print the document from its transaction. Naturally there may be some other settings which are required after setting transaction NACE.
    If you understand the Letter of delivery on the Goods Receipt, which can be printed from VL02N, then you have to set some automation to your printing using transaction VV22.
    Regards
    Tamá

  • Creating entries in a database table

    I have created a database table and want to insert new records in it thru this path -
    Utilities --> Table contents -
    > Create entries.
    But the create entries is not highlighted i.e. the system is not allowing me post entry in this way.
    Any idea why it might happen ?

    Hi Kushal,
    The issue is that the Table View Maintenance is set to be anything other than "Display/Maintenance allowed".
    You can get this in the "Delivery and Maintenance" Tab when you open the table through SE11.
    Change this to the above mentioned value and then you can create entries in the table.
    Thanks,
    Ajay.

Maybe you are looking for