Creating File System in SOLARIS

Hi Everyone,
We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
We'll appreciate your answers. thank you.
Regards,
Eco

> We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
newfs?
I'm not sure what you mean with "we automatically go to disk zero..".
> We'll appreciate your answers. thank you.
I suggest you take a Solaris class; no offense but if you have no clue how to administer your operating system running a SAP installation on top can be very tedious.
Markus
Edited by: Markus Doehr on Sep 16, 2009 11:16 AM

Similar Messages

Does exist any top creating archives in a file system in solaris 10?

I need to know if exist any limit creating archives in a file system in solaris 10
thanks

http://www.unix.com/solaris/25956-max-size-file.html

Udfs file system on Solaris 10

hello all,
cannot find the limit of udfs file system on solaris 10.
Which is the med a block size that can be used ?
ANy chance to create udfs on 8192 block size media ?
Thanks
Aldo

First check the mkfs_udfs((1M) manualpage, it displays some information regarding this. Next you may benefit from the fsdb_udfs(1M) command to display certain options. But with regards to blocksize and the likes the first manpage should do.

Unable to create File System Repository manager

Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
Roy

Hello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak

Unable to create File System Repository using Network Path

Hi All,
I am trying to create a File System Repository.
I created a networkpath and windows system and used the same while creating File Repository according to the steps in help.
With out using Networkpath(i.e.,If I use IP address,I am able to create File System Repository).
But with the network path,it throws the following error as seen in Component Monitor.
<b>Startup Error: The localroot does not exist: C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001
</b>
Did any one face this problem?
Any help please........
Rgds,
Santhosh

Hi,
I am getting the same error even if I replace(\) by slashes(/).
I tried on EP6SP12 as well as EP6SP2 and got the same error on both.
The repository is searching for a folder named with
n/w path on the portal server itself(i.e, it is searching in the following folder
<b>C:\usr\sap\IGTE\j2ee\j2ee_00\cluster\server\NWP_001
My network path is NWP_001</b>),instead of searching on the remote system.
Can any one help me in solving the problem
Thanks in Advance.
Rgds,
Santhosh

Procedure to create file system in AIX or HP-UX

hi gurus
i have to install SAP BI on one HP-UX server. unfortunately the OS admin is not available and i have to cretae file systems too.
can any one tell me how to create file systems in HP-UX which are required for SAP installation on Oracle. i know the all the directories required for the installation but i just wonder is it like just create directory like
/usr/sap/<SID> and mount on to any logical volume. or the procedure is different from what i am thinking
please help

thanks kishore.
such a genious . grt.

How to create file system datagrid in flex web application

how to create file system datagrid in flex web application

Hi,
Check this out:
http://shigeru-nakagaki.com/flex_samples/FileReference/FileUploadExample2/FileUploadExampl e2.html
Johnny
Please rate answer.

Is there native file system for solaris cluster?

As GFS for RedHat Linux and GPFS for AIX, is there any native file system for solaris cluster? Thanks for any infomation!

What do you mean by 'native'?
Oracle Solaris Cluster has a feature called the Global File System (or sometimes the Proxy File System). It allows UFS or Symantec VxFS to be mounted globally (on all cluster nodes simultaneously) in read/write mode. There is also a shared QFS option. All these are described in the documentation and in the book "Oracle Solaris Cluster Essentials".
Tim
---

Creating File System Repository for a remote system

Hi Experts,
My requirement is that I need to create a KM repository in EP from where I need to upload documents into the BW system. Is File System Repository the right type of repository which I need to create for this purpose?
If yes, then in what format do I have to specify the value of the Root Directory property of the repository? I have a folder /data/docs created in the BW system within which I want to upload documents using this repository. But since this folder is located on the BW system which is a remote system for EP, I am not sure how I have to enter the path to this folder.
Can anyone give me any hints on this?
Warm Regards,
Saurabh

Hello Saurabh,
I don't think an FS repository is what you are looking for in this scenario, you could instead use a BI Repository Manager, for more information see:
http://help.sap.com/saphelp_nw70/helpdata/en/43/c1475079642ec5e10000000a11466f/frameset.htm
Kind regards,
Lorcan.

How to determine the file system on Solaris

Friends,
How to determine which file system I have installed UFS or ZFS on Solaris
Thanks

Other methods would include looking at the /etc/vfstab if it's in there or fstyp(1M):
System Administration Commands fstyp(1M)
NAME
fstyp - determine file system type
SYNOPSIS
fstyp [-a | -v] special [:logical-drive]

How do you expand a file system on Solaris 10 that is running as a LDOM on Solaris 11

I'm somewhat new to Solaris but needing to expand an existing file system /work on our solaris 10 ldom that was P2V'd into a Solaris 11.2 environment. I also have several additional questions that I can't seem to find an answer for anywhere.
When trying to expand the disk device using the "format" command, when you get to the partition and it asks you to "Enter partition size(147456b, 2c, 3891e, 72.00mb, 0.07g]:" what does the "b" "c" "e" sizes indicate and why and when would you use them? It seems that you would want to always just add size based on MB or GB?
When trying to use "growfs" after I increased a partition on a disk, I get error devinfo: /dev/dsk/c0d0s7: Inappropriate ioctl for device, growfs: cannot get partition size. What step have I missed?

Matt--
One suggestion: if you can't figure out how to put a file system on the empty space, you could clone your current partition to an external drive, re-partition the internal drive drive and then clone the external back. Like John, I've heard of utilities that can re-partition a drive without erasing your data, but I just can't imagine using one if I didn't have a clone anyway. So that's what I've done when I want to change a partition size.
charlie

Unable to see created File System Repository

Hi,
I have created a File System Repository following the link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
I am not able to do user mapping by going in personalize as I can found my windows System there.
Do I have to create a new system mwhere else.
BTW, I am mapping to a remote window system with the KM.
Please give useful suggestions.
Points given for problem solving answers.
Sumit

Hi,
Example configuration of a WINDOWS® file system repository manager given in the Help.sap.com.
Creating System:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Specifying User Mapping:
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/frameset.htm
Senthil K.

Create file system directory, no oracle directory

I want to create a directory in the filesystem, example / test / directory1,
I want to create a directory tree example:
/ test / directory1
/ test / dir2
/ test / dir2 / folder
as if a linux mkdir.
Is it possible with sql?
thanks
Greetings

i need Java (jserver) installed in oracle no?,
for load in the database, with this:
declare
f file_type;
fz file_type;
r number;
begin
-- get a handle for the "tmp" directory
f:=file_pkg.get_file('/tmp');
-- create a new temporary directory where the zip archive is being
-- extracted into ... make the filename unique using TIMESTAMP
fz := f.create_dir(+
'zipdir_temp_'||user||'_'||to_char(systimestamp, 'YYYYMMDD_HH24MISS.SSSS')
-- DOIT:
-- extract the zipfile; the -qq switch is very important here - otherwise
-- the OS process will not come back
r := os_command.exec('unzip -o -qq [PATH/TO/ZIPFILE] -d '||fz.file_path);
-- if the result is 0 (=success) load the contents of the temporary directory
-- (recursively) with ONE (!) SQL INSERT command
if r = 0 then
insert into document_table (
select
seq_documents.nextval id,
e.file_path,
e.file_name,
file_pkg.get_file(e.file_path).get_content_as_clob('iso-8859-1') content
from table(file_pkg.get_recursive_file_list(fz)) e
end if;
-- finally delete the temporary directory and its contents
fz := fz.delete_recursive();
end;
sho err
and how install jserver??
Edited by: rafa298 on 05-may-2011 2:22

Implementing a proprietary file system for Solaris

Hi there,
I'm implementing at the moment a proprietary FS for several platforms including Solaris. Is there a good source of information about Solaris
flavor of Vnode/Vfs interface?
I do know about Erez Zadok's works in FS stacking, but his code examples
seem to be the only piece of information available publically. Am I right?
In particular, the Vnode method vop_realvp is of great interest for me. Since there is no such a thing neither in BSD, nor in Linux,
I'd appretiate it very much if somebody will give a tip about it's
purpose.
Hope to get a tip before the sources of Solaris 8 will be published...
Thank you in advance, sincerely,
Ilya

I'm implementing at the moment a proprietary FS for
several platforms including Solaris. Is there a good
source of information about Solaris
flavor of Vnode/Vfs interface?No there's none other then the source code itself, I'd
say you can't write filesystems for solaris without actually
having solaris source code access and even then it's
going to be a challenging task so you may up ending
looking for an existing filesystem that already solves
your problems.
frankB

Lucreate - Cannot make file systems for boot environment

Hello!
I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <d100> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Updating system configuration files.
The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
Creating configuration for boot environment <S10U6_20081207>.
Source boot environment is <d100>.
Creating boot environment <S10U6_20081207>.
Creating file systems on boot environment <S10U6_20081207>.
Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
Mounting file systems for boot environment <S10U6_20081207>.
Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
Well - why's that?
I can do a "newfs /dev/md/dsk/d200" just fine.
When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
/bin/nawk: can't open file /etc/lu/ICF.2
Quellcodezeilennummer 1
Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
Would anyone maybe have an idea about what's broken there?
--($ ~)-- LC_ALL=C metastat
d200: Mirror
    Submirror 0: d20
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d20: Submirror of d200
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s0          0     No            Okay   Yes
d100: Mirror
    Submirror 0: d10
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 31458321 blocks (15 GB)
d10: Submirror of d100
    State: Okay
    Size: 31458321 blocks (15 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s0          0     No            Okay   Yes
d201: Mirror
    Submirror 0: d21
      State: Okay
    Submirror 1: d11
      State: Okay
    Pass: 1
    Read option: roundrobin (default)
    Write option: parallel (default)
    Size: 2097414 blocks (1.0 GB)
d21: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t1d0s1          0     No            Okay   Yes
d11: Submirror of d201
    State: Okay
    Size: 2097414 blocks (1.0 GB)
    Stripe 0:
        Device     Start Block Dbase        State Reloc Hot Spare
        c1t0d0s1          0     No            Okay   Yes
hsp001: is empty
Device Relocation Information:
Device   Reloc Device ID
c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
--($ ~)-- /bin/df -k | grep md
/dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
Michael

Hello.
(sys01)root# devfsadm -Cv
(sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
--($ ~)-- sudo env LC_ALL=C LANG=C lustatus
Boot Environment           Is       Active Active    Can    Copy
Name                       Complete Now    On Reboot Delete Status
d100                       yes      yes    yes       no     -
--($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
               boot environment name: d100
               This boot environment is currently active.
               This boot environment will be active on next system boot.
Filesystem              fstype    device size Mounted on          Mount Options
/dev/md/dsk/d100        ufs       16106660352 /                   logging
/dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
<code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
Copying.
*{color:#ff0000}Excellent! It now works!{color}*
Thanks a lot,
Michael

Creating File System in SOLARIS

Similar Messages

Maybe you are looking for