Creating Filters using RSPLAN in BW7.3
Hello all,
I got an issue in NW BI 7.3 System. One of our BI functional person is trying to create a "Filter" (Filter Object Planning) using RSPLAN. But there is an error popping up saying "This function is currently not available".
Need your suggestions and help in resolving this issue.
Regards,
Shahid Ahmed.
In my eyes it seems ABAP Planning Modeler has no full functions as its JAVA version has. See note:
1484610 - Composite SAP Note: ABAP Planning Modeler 7.30 BETA
Similar Messages
-
Creating Report using EPM Functions with Dynamic Filters
Hi All,
I am new to BPC, In BPC 7.5 i seen like we can generate EPM report using EVDRE function very quickly and easy too. Is the same feature is existing in BPC 10.0 ? if no how can we create EPM reports using EPM Functions with Dynamic Filters on the Members of the dimension like in BPC 7.5.
And i searched in SDN, there is no suitable blogs or documents which are related to generation of Reports using EPM Functions. All are described just in simple syntax way. It is not going to be understand for the beginners.
Would you please specify in detail step by step.
Thanks in Advance.
Siva NagarajuSiva,
These functions are not used to create reports per se but rather assist in building reports. For ex, you want to make use of certain property to derive any of the dimension members in one of your axes, you will use EPMMemberProperty. Similary, if you want to override members in any axis, you will make use of EPMDimensionOverride.
Also, EvDRE is not replacement of EPM functions. Rather, you simply create reports using report editor (drag and drop) and then make use of EPM functions to build your report. Forget EvDRE for now.
You can protect your report to not allow users to have that Edit Report enabled for them.
As Vadim rightly pointed out, start building some reports and then ask specific questions.
Hope it clears your doubts. -
Why Dynamic Parameter is not working, when i create report using stored procedure ?
Post Author: Shashi Kant
CA Forum: General
Hi all
Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
is not shown to me when i referesh the report for viewing the results.
I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
============================================================================================
1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
Dynamic Parameters in Action
My question is that whether dynamic parameter is working with storedprocedure or not.
When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
Please reply soon , it's urgent
Regards
shashi kantHi Kishore,
I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
=lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
As to the second issue, please try to use the following expression:
=Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl file with all the size properties to us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Error while creating filter using BD59 and BD64
Hi Friends-
While creating filters for HRMD_A message type using BD59 i have added one field stat2 for segment
E1P0000 and its coming also in BD64 while creating filter group but when i double click on it to give value to it it gives me error ' Inconsistency in ' .
what could be the reason pls let me know ?
Regards
MeetaHi,
Try to distribute the model view in BD64 ( Edit->ModelView->Distribute). you can check for technical inconsistencies for message type in Transaction BDM5
Regards,
Vinod -
Hi all, May i know how to create filters in Hyperion Planning Application?
Hi all, May i know how to create filters in Hyperion Planning Application?
i don't know how to create filters in Planning Application. but my superior asking me to create filters.
Thanks & Regards,
SekharGo to Administration > Dimensions > Select Dimension > Select the member to want to assign acccess filters to :- Assign Access
Repeat process for all access permissions.
If there is a lot of permissions to set you could use a utility :-http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/ch03s07.html
Refresh Planning including security filters
Also have a read of :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/mg_secfilter.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Creating filters for tRFC and qRFC (SM58).
Hi All,
I am trying to create filters for qRFC and tRFC as per OSS note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor. When I try to create/copy owner I am getting error "_not in name space_" in task bar when I try to save the changes, I tried all kinds of naming convection still unable to proceed. Pls tell me how can I resolve this issue.
System:-
Kernel version 700
Support pack 13
Regards,
kurmaHi Jordan,
We used to 'reorganize' the tRFC/qRFC LUWs via sm58.
Your found note is ok and try to refer some other notes as well.
Note 375566 - Large number of entries in tRFC and qRFC tables
Note 760113 - Delete unprocessed LUWs in the qRFC
Following similar thread might also help -
how to delete error entities in TRFC queue to clear stuck
Thanks -
Show values of filters used in the columns
hi experts
Probably it is very simple but I don´t find how to do it. I would like to see in the query the values of the filters used to calculate the columns.
I.e. One column is the amount of the net income for one month. The month is asked when I execute the query but when the query is executed I don´t see in the screen the month used.
Thanks and regardsLuis,
I think you are wanting to use text variables on the columns to get the values of the month. To do this go into the column name and type &. It will prompt you to select, create, or edit a text variable. You can create a variable here to display the value of the characteristic your variable is on (i.e Month).
Hope this helps,
Rusty -
Error while creating stock using tcode: MB1C
Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not existHi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu -
Logical error in creating tables using db link in solaris
Hi,
While creating table using the syntax create table newtab...as select * from tab@dblink .. I am facing a problem. The newtab table created is having a structure different (from datalength point of view of varchar2 and char datatypes) from the source. The data length is getting tripled i.e. if a column a is varchar2(20) in tab then it is becoming --- a varchar2(60) in newtab. This is happening in solaris environment when the two databases are in 2 different servers. Please let me know if there are any patches to resolve the problem.
Thanks
ArnabORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link? -
How to save report in PersonalCategory after creating it using java panel?
Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol MaliHi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
+ "SI_INSTANCE=0 And SI_ID=" + reportID;
InfoObjects infoObjects = infoStore.Query(query);
InfoObject infoObject = infoObjects[1];
Webi wreport = (Webi)infoObject;
ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
/personalIDs.Add(Convert.ToInt32(categoryID));
infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM -
I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked. -
How to create invoice using bapi base on delivery number with example
hi,
Pl give me one example to create invoice using bapi base on delivery number (PGI).Use this code
* Pass the delivery no to the FM to create the invoice
wa_vbsk-smart = u2018Fu2019.
wa_komfk-vbeln = nast-objky. u201CuF0DF-----delivery number
APPEND wa_komfk TO it_komfk.
CLEAR wa_komfk.
* To fill the message structure
* l_wa_error-vbeln_vl = nast-objky. " Delivery No.
* l_wa_error-fkart = wa_ztab-bil_doc_type." Billing Doc type
CALL FUNCTION 'RV_INVOICE_CREATE'
EXPORTING
* delivery_date = 0
invoice_date = v_date u201C<- date
* invoice_type = ' '
* pricing_date = 0
vbsk_i = wa_vbsk
with_posting = u2018Du2019
* select_date = 0
i_no_vblog = ' '
i_analyze_mode = ' '
id_utasy = ' '
id_utswl = ' '
id_utsnl = ' '
id_no_enqueue = ' '
id_new_cancellation = ' '
** IMPORTING
* VBSK_E =
* OD_BAD_DATA =
* DET_REBATE =
TABLES
xkomfk = it_komfk
xkomv = it_komv
xthead = it_thead
xvbfs = it_vbfs
xvbpa = it_vbpa
xvbrk = it_xvbrk
xvbrp = it_vbrp
xvbss = it_vbss
* XKOMFKGN =
* XKOMFKKO = -
Error while creating Resource using GDS
Hi
Iam trying to create Resource using GDS and it is throwing me error
clresource: (C189917) VALIDATE on resource egateq00-haegate_reg-res, resource group egateq00-rg, exited with non-zero exit status.
clresource: (C720144) Validation of resource egateq00-haegate_reg-res in resource group egateq00-rg on node uhegateq02 failed.
clresource: (C891200) Failed to create resource "egateq00-haegate_reg-res".
This is the command I executed
rclresource create -g egateq00-rg -t SUNW.gds
-p Scalable=false -p Start_timeout=120 -p Stop_timeout=120 -p Probe_timeout=30
-p Port_list="23001/tcp" -p Start_command="/egateq00/scripts/reg_START.sh" -p Stop_command="/egateq00/scripts/reg_STOP.sh"
-p Probe_command="/egateq00/scripts/reg_PROBE.sh" -p Child_mon_level=1 -p Network_resources_used=egateq00-lh-res -p Failover_enabled=FALSE
-p Stop_signal=15 egateq00-haegate_reg-res
The log under /var/cluster/logs/DS says following
07/01/2008 17:56:43 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 17:56:43 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
07/01/2008 18:13:23 uhegateq02 START-INFO> scha_resource_open failed [14]. Keeping the old Log_level value
07/01/2008 18:13:23 uhegateq02 START-ERROR> Cannot access the start command </egateq00/scripts/reg_START.sh> : <No such file or directory>
However, I can open these scripts and run it from anywhere. I also tested these scripts and they all work fine. They are all set to chmod 777 , so everyone should have execute permission
Iam not returning any return value from these Start and Stop script , is that the why it is failing
thanksHi
I disabled the PMF as described on the http://blogs.sun.com/TF/entry/disabling_pmf_action_script_with. This is what I did
1>Added following line in the top of my Start script
while getopts 'R:G:' opt
do
case "${opt}" in
R) RESOURCE=${OPTARG};;
G) RESOURCEGROUP=${OPTARG};;
esac
done
sleep 60 &
/usr/cluster/bin/pmfadm -s ${RESOURCEGROUP},${RESOURCE},0.svc
2>While creating the resource , I used property for Start_command="/egateq00/scripts/reg_START.sh -R %RS_NAME -G %RG_NAME"
Now , after doing this , My RG is not getting lost. Also , in the message file I do not see the errors of "Start script failed to stay UP"
However, My Application is not started either.
This is what the message file says
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_validate> completed successfully for resource <egateq00-haegat
e-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
Jul 3 16:43:32 uhegateq01 Cluster.CCR: [ID 973933 daemon.notice] resource egateq00-haegate-reg-res added.
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_svc_start> for resource <egateq00-haegate-reg-res>,
resource group <egateq00-rg>, node <uhegateq01>, timeout <120> seconds
Jul 3 16:43:32 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_svc_star
t>:tag=<egateq00-rg.egateq00-haegate-reg-res.0>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, .
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_svc_start> completed successfully for resource <egateq00-haega
te-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 2% of timeout <120 seconds>
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <gds_monitor_start> for resource <egateq00-haegate-reg-re
s>, resource group <egateq00-rg>, node <uhegateq01>, timeout <300> seconds
Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 252072 daemon.notice] 50 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscgds/bin/gds_monitor_
start>:tag=<egateq00-rg.egateq00-haegate-reg-res.7>: Calling security_clnt_connect(..., host=<uhegateq01>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1
, ...)Jul 3 16:43:35 uhegateq01 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <gds_monitor_start> completed successfully for resource <egateq00-h
aegate-reg-res>, resource group <egateq00-rg>, node <uhegateq01>, time used: 0% of timeout <300 seconds>
4>Also , in the /var/cluster/logs/DS , I see the Start script started succesfully
07/03/2008 16:43:32 uhegateq01 START-INFO> Start succeeded. [egateq00/scripts/reg_START.sh -R egateq00-haegate-reg-res -G egateq00-rg]
5>Also , in the /var/cluster/logs/DS , I see the Probe script returning 0 , but this is wierd because it should return Non zero number. When I run the Probe script from the command line , it is returning me non zero value when the application is down
07/03/2008 16:43:35 uhegateq01 PROBE-INFO> The GDS monitor (gds_probe) has been started
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:44:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:45:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:46:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:47:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:48:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:49:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:50:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:51:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:52:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:53:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:54:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:55:35 uhegateq01 PROBE-INFO> The probe result is 0
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> Probe has been executed with exit code 0 [egateq00/scripts/reg_PROBE.sh]
07/03/2008 16:56:35 uhegateq01 PROBE-INFO> The probe result is 0 -
Error while creating Routing using LSMW
Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
RajHi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G -
Error while creating BOM using BAPI 'BAPI_BOM_UPLOAD_SAVE'
Hi All,
We are getting an error as 'Data is incomplete' while trying to create BoM using the bapi 'BAPI_BOM_UPLOAD_SAVE', if the item contains Item category as 'T'. But for other item category like 'L' or 'N', the bapi is sucessfull.
The values that we pass to fill the item category 'T' are operation, item_cat, bom_itm_no, COMPON_QTY, FIXED_QTY as 'X', UNMEAS as 'ST', ITEM_TEXT1 and ITEM_TEXT2.
Anyone who has faced same problem or has a solution to the problem, kindly provide a solution.
Regards,
VijayThe error you receive is because of different config for different Item Categories. Find out from the functional team what fields have they kept mandatory for the item category 'T'. You may not be passing one of those fields in the BAPI.
Try creating a BOM manually for item category 'T' and you may figure our which field you are missing.
Maybe you are looking for
-
How to Extract Data for a Maintenance View, Structure and Cluster Table
I want to develop 3 Reports 1) in First Report it consists only two Fields. Table name : V_001_B Field Name1: BUKRS Table name : V_001_B Field Name2: BUTXT V_001_B is a Maintenance View For this one I don't Find any Datasource For this Maintena
-
can someone please tell me what to do? when i connected the ipod to itunes everyhting became enlarged alll of a sudden and now i cant see the whole screen. How can i fix it???
-
Workitem is not appearng in the user's inbox
Hi All, In my workflow the workitem is not appearing in the user's inbox. can anyone tell me how can i resolve this? thanks and regards, K.Perumalraj
-
TSQL to know if an update was run at a specific time
Hello, I am using SQL 2008 R2 SE and would like to know if I will be able to trace with a tsql if a record in a table was updated from an older time. Like in table abc if a record was updated on jan1, 2014? Is this possible. Since I am using SE i kno
-
I have developed a Smartform ..i want to send this to my friend in denmark who got same requirement . Can i send it to my friend through mail....I want to send every screen of tht form.. Points will be awarded regards, Reddy