Creating first brochure tutorial

Trying to place the exercise files 1-6 to document and I am getting error message: "Cannot place this file. No filter found for requested operation". Thanks for any info to solve issue.

Hi,
In the 2nd video, at 00:16, the presenter chooses Place from the File menu to navigate to the location where the assets were doanloaded. Then hold the SHIFT key to select all the numbered files (01 to 06) together. Then click on various locations across both pages to place them. This is a shortcut that replaces having to place each of the assets individually.
Please try this again using the steps described above. Let me know if you receive the same error message again.
Best,
Rita Amladi

Similar Messages

How do I create a brochure in InDesign?

How do I start a brochure in InDesign and are there pictures I can use online for free or do I have to buy them?

MadisonPike wrote:
How do I start a brochure in InDesign and are there pictures I can use online for free or do I have to buy them?
One really useful tool I've used (and still do) for learning InDesign (and lots of other stuff) is to search Google with a concise question and the word InDesign in it. You may get more than you want, need, or can deal with, but you'll be seeing responses from this forum's posts and other Adobe.com resources, as well as from lots of other non-Adobe sources "out there."
Here's an example: how to create a brochure in InDesign
HTH

How to create a software tutorial with iMovie

Hi all,
I need to create a video tutorial on OpenOffice for college students, and I wonder how to do it with iMovie. What I need is to show a continuous screen shot of what I need to do to perform some action in OO while voicing over the explanation, e.g. the viewer should see how the screen changes and which commands I use and hear my voice too.
Any info will be much appreciated.
Thanks a lot

What I need is to show a continuous screen shot of what I need to do to perform some action in OO while voicing over the explanation, e.g. the viewer should see how the screen changes and which commands I use and hear my voice too.
I use Snapz Pro X but there are other screen capture application out there if you prefer something different. The basic work flow is to capture what is taking place on your display screen as your are working in the application. You could capture you voiceovers and system audio at the same time, but I prefer to do the voiceovers later in case of mistakes (and I make more than my share). I then save the screen capture(s) to an iMovie '08 edit compatible compression format (I usually use AIC/AIFF) and import it into the application for editing, titles, and/or transitions as needed. I then output the project to AIC/AIFF and open it in GarageBand for adding the voiceover narrative track, blending with any other audio, and/or adding of a chapter track if desired. When finished, I export the completed file to whatever distribution format seems best. As most of my tutorials are "quickies" made in response to questions here or from the local Apple User Group, I am less interested in response time than formal "quality control."
If interested, you can view some of the "quickies" HERE.

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.

Creating PDF brochure for printing: Remove white margin

Hi guys,
I created a brochure in Idesign which has a black background color.
In order to print the brochure I want to create a PDF (with the right order of pages, e.g. page 1 next to page 8, 2 next to 7 etc.) via the "print function".
The page order is not a problem, but unfotunately I always get a white margin although there is no such in the original indesign document.
(When using the normal "export function" of Indesign there is no white margin, but then I cannot create a PDF with the right page order for printing...)
Has anyone an idea how to solve this?
Thanks for your help in advance!
Best,
Chris

In order to print with bleed you generally need to print onto a larger sheet and trim. I'm guessing you are trying to print this on a desktop printer of some sort, and unless specifically designed for "borderless" printing they always have a border along the edge that cannont be imaged.

How to create first database

Hi there,
This is my first post on this forum. I am totaly new to Oracle as I am working on one project which require Oracle as db.
I have installed Oracle Database 10g Express Edition. I can login by system user or as hr. Now when I am trying to create database instance for my project.net application, I am not finding the option to create the db. Its manual (even here in forum someone) pointed about Configuration and Migration Tool menu under Start/Oracle. But I don't have that option under my oracle. What I have is Start > Oracle Database 10g Express Edition > 1) Help 2) Backup Database 3) Get Started 4) Go to Homepage 5) Start SQL command line 6) Start Db etc...
Can anyone guide me how to create first database? Thanks in adv and your answer will really be appreciated.
Regards,
Yatrik

I think I didn't explain properly. I can connect. I have got two database users as well. The one is default hr and second I just created as yatrik.
By saying how to create database, I want to accomplish this below procedure.
Run the Oracle Database Configuration Assistant located in the Windows Start/Oracle/Configuration and Migration Tools menu to create a database instance for the Project.net application. 1. Select Create a Database the click Next.
2. Choose the General Purpose database template.
3. Note the Global Database Name and SID that you use.
4. Choose your preferred management method. If unsure, chose the default.
5. Note the password(s) you use for the various accounts.
6. Select the appropriate storage mechanism for your installation. Again, if unsure, chose the default.
7. Specify the storage location.
8. And Recovery Configuration.
9. Do not install the Sample Schemas.
10. Select the remaining options, as appropriate to your installation, and create the database. Here when I go to Start > Oracle Database 10g Express Edition, I don't get Configuration and Migration Tools Menu anywhere. The above steps says how to create it but I can't find that tool menu.
I know how to create tables and all such but I am looking for that particular option where I can complete the above steps.
I hope I have explained more briefly to understand what I am trying to do.
Yatrik

Mac software for creating e-brochures?

Is there any mac software out there to create e-brochures with page flip?
The only software i can find is windows only!
Thanks, Nathan

Pratgeek wrote:i recently switched to archlinux from ubuntu.there is ubuntu there was tdfd for creating Data Flow Diagrams but i am not able to find any alternative for archlinux.
Could anyone suggest me the software to be used.
drcouzelis wrote:
rp181 wrote:Can't find the program u are talking about though.
I can't find it either. Pratgeek, what was the name of the application you used in Ubuntu? Is there a website for it?
probably a kind of necrobump, but i've been searching for flowchart drawing software, and found this topic.
well, mentioned tdfd is the part of software suite called TCM available at least in debian/ubuntu.
it appears to be really old, i could found only user guide and ubuntu/debian package pages on the web, but it appears to be working quite well.
i've installed it on my ubuntu machine just half an hour ago, but it seems to be at least worth to play with, and i'd even make a PKGBUILD if i like it.

Creating PDF brochure for printing: Black color adjustment

Hi guys,
I created a brochure in Idesign which has a black background color and in addition also some pictures with black backgrounds.
In order to print the brochure I want to create a PDF (with the right order of pages, e.g. page 1 next to page 8, 2 next to 7 etc.) via the "print function".
The page order is not a problem, but the black background color is rather gray instead of black - so there is quite a difference between the black background color of the pictures and of the whole background.
(When using the normal "export function" of Indesign I know how to solve the color problem, but then I cannot create a PDF with the right page order for printing...)
Has anyone an idea how to solve this?
Thanks for your help in advance!
Best,
Chris

Your images all use some form of Rich Black for the background, and that prints using all 4 CMYK inks. Your 100%K background will almost always seem gray next to that because it is, in fact, lighter. This will be true even if you use a profile conversion to make it also a 4-color black.
You can make your own rich black swatch and use it as the background (sample a few of the images to get some idea of a good mix), but in truth your images are still probably not going to match all that well. Images tend to have color variations across the background, and your ID background is a flat color, so even a slight mismatch can cause the edges to be obvious. There can also be differences in color on some printers caused by differences in the way raster and vector content are processesd.
I prefer to embrace that, or at least admit it is going to happen, and either use a completely different color for the background so the mismatch always shows, and looks deliberate rather than like a mismatch, or I add a stroke to the image frames, often paper, to break the continuity and disguise the mismatch.
As far as imposing the file and exporting, there are a number of free scripts, and an actual plugin, IDimposer which is also currently free, that can impose your file for you before you export. You can learn more about the plugin at Overview | IDImposer

Creating a Brochure for Pages

I'm working on a theater brochure for my college. Anyway, I'm curious if there's a step by step method somewhere to create one from scratch or more templates available online. Thanks in advance...
rick

Free templates are available from:
http://www.iworkcommunity.com
Higher quality commercial templates:
http://www.stocklayout.com
http://www.jumsoft.com
http://www.keynotepro.com
http://www.keynoteuser.com
http://www.keynotethemepark.com
Since creating a brochure is both a technical and a design process it is difficult to suggest a "Step-by-Step" guide. Study the templates provided and actual copies of material you admire and try to deconstruct them.
Apple provides good video tutorials on using Pages, available under the Pages' Help menu.
As always ideas, taste and experience are recommended, but rarely employed.
Peter
P.S. A word of warning, read the posts here before going off expecting to print the brochure commercially. Pages is not built for this.

How do you create a brochure for a website that is interactive and opens like a real brochure?

I've created a brochure in Indesign. I can make it interactive and have the pages turn like a book, but I want it to open like a brochure. How can I do this and with what program?

Next we'll want folding pieces represented on a screen that represents the unfolded piece of paper behaving like a pdf, behaving like a folded piece of paper.
It's like inception!
I use BoxShot 4 - you can save a 3D pdf.
It doesn't allow folding - but gives it a good idea.
https://dl.dropboxusercontent.com/u/17210757/test.pdf

VL/AO:Create Masterdetail @ same time ENSURE that Master is created first??

Hi,
I have for example an Order table and lines table with FK.(AO)
I i want to create a master record and some lines at the same time.
But If I call createInsert on the Master view then call createRow on the detail VO.
The detail lines are inserted first which causes a Violation error.
How can I ensure that master is created first..??
Do I need composition??
Please help. this should be something frequently asked??
Thanks
JO

Hello,
you can enable composition or check ADF Developers guide 4GL chapter 26.7 (Controlling Entitiy Posting Order).
Rado

Tried to follow the first video tutorial with no success

Hi,
I tried to run the first video tutorial (Your First AFCS Application) on LCCS SDK Navigator with no success.
The code as described is:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" xmlns:rtc="AfcsNameSpace">
    <fx:Declarations>
        
        <rtc:ConnectSessionContainer width="100%" height="100%" roomURL="https://connectnow.acrobat.com/smoky6880/room">
            <rtc:authenticator>
                <rtc:AdobeHSAuthenticator userName="*******" password="*******"/>
            </rtc:authenticator>
            <mx:HBox width="100%" height="100%">
                <mx:VBox width="25%" height="100%">
                    <rtc:Roster width="100%" height="50%"/>
                    <rtc:WebCamera width="100%" height="50%"/>
                </mx:VBox>
                <rtc:SimpleChat width="75%" height="100%"/>
            </mx:HBox>
        </rtc:ConnectSessionContainer>
    </fx:Declarations>
</mx:Application>
Basically, I pressed the Debug button and all I am getting is:
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 370,463 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 2,292,131 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 706,253 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 648,239 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 441,686 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 1,429,050 bytes after decompression
[SWF] C:\Documents and Settings\Kevin Lee\Adobe Flash Builder 4\VideoChat\bin-debug\VideoChat.swf - 323,414 bytes after decompression
I am not getting any message related to connection. And yes, the username and password are correct; I just removed them for privacy. Any ideas?
Thanks,
Kevin

Hi Kevin (and welcome to the forums!),
Wow, that's a trip... ConnectSessionContainer is a visual component, so I
guess it needs to be outside your <fx:Declarations> tags. I didn't know that
putting it in there would cause all hell to break loose (I love how the
number of bytes keeps changing!); you learn something new every day!
nigel

To create a simulation tutorial of an iPad App using Adobe Captivate 08.

To create a simulation tutorial of an iPad App using Adobe Captivate 08.
The solution I got is to use Reflector App to mirror the iPad on to the PC and then record the screen. And to show user taps (essential for creating a simulation) through the reflector, NRTouchPoints, a UIWindow subclass that simulates user touches on the screen, has to be included in the application. Has anyone tried this out? Is this suggestion feasible?

After developing the .swf, I'm creating a .apk (Android application
package) file which includes the finished .swf file (at 720x1280), 3 icon
files (one of which is used as the button on the Android screen to start
the app), the required .xml file (which holds the necessary info on how
Android uses the .apk file).
The finished .apk file is then uploaded to the Android device using the adb
(Android Debug Bridge) commands in a command prompt.
Gary Giurbino*
eLearning Developer
*Enterprise *Product Docs & Communication
W: 650.214.2462
[email protected]
<http://www.google.com/>*
1600 Amphitheatre Pkwy
Mountain View, CA 94043

I am not having any luck trying to create a brochure with ID in CC

I am not having any luck trying to create a brochure with ID in CC. i thought i remembered it to be something you can use in Bridge also. Can't seem to find that either.
anyone have any help they can offer?

If you're starting from scratch learning InDesign, know that it's difficult to learn just by asking a few questions. You'll do much better either by buying an excellent, inexpensive book by Sandee Cohen:
InDesign CC: Visual QuickStart Guide
Or by watching some videos on www.Lynda.com. Here's the best introduction:
InDesign CC Essential Training

Help me for creating a Typing Tutorial

hi,
Am a beginner in java. I want to know the codes for creating a typing tutorial. please help.
Stanly Mathew

hi,
Am a beginner in java. I want to know the codes
des for creating a typing tutorial. please help.Start with a tutorial on Swing: http://java.sun.com/docs/books/tutorial/uiswing/
More specifically, you will need to know about
- Layouts
- JTextPane, JEditorPane
- KeyListener

Creating first brochure tutorial

Similar Messages

Maybe you are looking for