Creating folios for iphone using a pdf-to-indesign script

Hello, i need to convert all my magazines to iphone format. Someone can help me with the script using pdf-to-indesign for IPHONE? Or an alternate solution to convert all my magazines (1024 x 768) to Iphone (480 x 320)? Thanks a lot!!

Working with Derek directly did the trick!
The difficulty with the script is that it requires everything to be in "alphabetical order." What that means is that when you split the files in Acrobat into individual PDFs, everything needs to be in "alphabetical order" and Acrobat does not do that the way this script requires.
So Acrobat gives me 1_ISSUE24.pdf, 2_ISSUE24.pdf and if I had 9 pages, that wouldn't be an issue. But I had over 200 pages for a specific issue and when you get to page 10, you're no longer working in alphabetical order if the single page numbers don't have a 0 in front of them.
So if you have up to 99 pages, make sure every page with a single page number has a 0 in front of it, e.g. 01_ISUEE24.PDF
If you have up to 999 pages, make sure every page with a single page and double page number has two 0's in front it., e.g. 001_ISSUE24.PDF
Unless there's a program out there that will automatically put 0s in front of filenames for you, you have to do this manually, which is slightly time consuming. FAR LESS time consuming, however; than re-sizing everything yourself and doing this the old fashioned way with cut and paste, etc. etc. etc.
So the script is extremely helpful, it's free - you just have to have your page numbers numbered correctly.
Thank you, Derek, for your time and your help.

Similar Messages

Can I create books for iPhone using iBooks Author?

Can I create books for iPhone using iBooks Author?

There is a new $5 iBooks Creator app in iOS app store for the iPad.
The output looked pretty good for an iPad app.
There is a video on how to use it to give you an idea of how easy it is.
It creates ePub 2 whihc can be read on all platforms with an ePub reader except Amazon Kindle whihc forbids such things.
You can run the ePub through Calibre and get MOIB for Kindle which works for me.
I have done thirty or forty conversions so far.

Hello i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i b

hello
i bought my first mac and i want to become an iOS developer and creat app for iPhone iPad but now i have only iPad 4 and i want to buy iPhone 5s but I'm not sure to buy iphone5s now or wait for iPhone 6 because iphone6 may have bigger screen if i buy iphone5s now can i creat app for iPhone 6 if it has bigger display without buying it just test it on iPhone 5s
thanks

One of my favorite things about developing for iOS using Xcode is the Simulator. It runs any of the iOS devices simulated right on your Mac. If you don't have a hardware device to test your application on, the Xcode simulator will surely be your best friend.
So to answer your question less vaguely, yes. You can own the iPhone 5s and develop for the 6. There is no real release information of the iPhone 6 at the time anyways, so I would not let it play too large of a factor in your decision.

Can't create Ringtone for iPhone

everytime I click on the ringtone symbol next to the song I want, it says that I need to accept the iTunes Store Terms of Service and that by clicking 'OK' it will direct me to that. Thing is, I've already accepted that and when I click OK, it does nothing. It's becoming a real pain..any ideas?

I sent iTunes support a note about that and although they didn't answer my question directly, they got me around it. For what's worth, it did work; however, now I have a new problem. Long story short, don't create more than one ring tone for now. I'll post my crap about that momentarily...
Here's what they wrote:
First I want you to try to create a ringtone with the following steps:
1) If you haven't already, upgrade to the latest version of iTunes, which is available free of charge on the iTunes website:
http://www.itunes.com/download
2) Open iTunes, access the iTunes Store, and look at a few songs. A bell icon next to a song indicates that you can make a ringtone from the song. The bell icon does not mean that the song itself is a ringtone. If you do not see any bell icons, choose View > View Options, select the Ringtone checkbox, and click OK. A ringtone column will appear and any eligible songs will have bells next to them. Purchase any ringtone-eligible song you like.
3) Now click Purchased in the list on the left. If you do not see any bell icons, choose View > View Options, select the Ringtone checkbox, and click OK.
4) Click the bell next to a song to begin making a ringtone. The ringtone editor will appear at the bottom of the iTunes window.
5) Adjust the highlighted area to choose the part of the song (up to 30 seconds) you want to use as your ringtone. You can also choose to fade in or out the audio by clicking the checkboxes in the highlighted area.
6) Select a "Looping" length, which will set the gap between each ring. Click Preview to hear your ringtone before purchasing. Once you're satisfied with your ringtone, click Buy. Your iTunes Store account will be charged 99 cents plus any applicable taxes. Any song credits or video credits that may be on your account will not be used toward the purchase.
7) Your ringtone will appear in your iTunes library Ringtones playlist on the left side of the iTunes window.
8) To sync the ringtone to your iPhone, connect your iPhone to your computer. In iTunes, select your iPhone on the left and click Sync. iTunes will automatically sync any ringtones you create. To sync specific ringtones, with the iPhone selected on the left, click the Ringtones tab, choose Selected ringtones, and click Apply. Check the ringtones you want to sync and click Sync.
Please note that any ringtones you have previously synced to your iPhone will be replaced with the ringtones that you are currently syncing from your authorized iTunes library.
To set a ringtone as your default ringtone, go to the Home screen on your iPhone. Tap the Settings icon, then tap Sounds. Tap Ringtone, then choose a ringtone. This will become your default ringtone.
To assign a ringtone to a specific contact, go to the Home screen on your iPhone. Tap the the Phone icon, then go to your Contacts. Choose a contact, then tap Ringtone and choose the ringtone. When that contact calls, you will hear that ringtone.
Please note that iTunes creates ringtones for iPhone only, and the ringtones you create with your iTunes Store account may not be transferred to other accounts. Also note that even if you create a ringtone from iTunes Plus (DRM-free) content, the purchased ringtone will include DRM-protection.
To learn more about ringtones, please see:
How to Create and Buy a Ringtone for your iPhone
http://www.info.apple.com/kbnum/n306373
iPhone Ringtones FAQ
http://www.info.apple.com/kbnum/n306374

When creating iframes for htm pages, I pdfs work just fine in all versions of Firefox. However, when I construct an iframe for an htm to be displayed on an htm

''duplicate of https://support.mozilla.org/en-US/questions/973637 - locking''
When creating iframes for htm pages, I pdfs work just fine in all versions of Firefox. However, when I construct an iframe for an htm to be displayed on an htm, Firefox 24 will not load the htm/iframe.

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

How to compile your flex application for Iphone Using Adobe Flash CS5?

How to compile your flex application for Iphone Using Adobe Flash CS5?

I'm so sorry, I'm not really familiar with the codes.

Should I be creating folios for the ipad at 1024 x 768 or 2048 x 1536?

Hi,
Should I be creating folios for the ipad at 1024 x 768 or 2048 x 1536?
Thanks

The older iPad generation cannot display folios in 2048x1536, they are too large for the screen of the iPad and the iPad2. If you want to make sure all iPad users can see your content go for 1024x768.
If you have the resources to create several renditions of your folio, create a high-definition rendition to target specifically users with a Retina iPad. Have a look at this article: Creating DPS content for different iPad models.

Sample code creating BOM for CS01 using BDC recording.

Hi,
Can anyone give me sample coding creating BOM for CS01 using BDC recording.
I want to display the flat file records,under one (Alternative BOM).
I m already working on it,but i m getting one A.BOM for each records.
[       Header data          ]    [      Item Data               ]
SOFTDRINKS   WIND   1       13            1     ml     l
SOFTDRINKS   WIND   1       11            1     ml     l
SOFTDRINKS   WIND   1       15        1     ml     l
SOFTDRINKS   WIND   1       14       1     ml     l
Code:
report ZBOM
       no standard page heading line-size 255.
*include bdcrecx1.
*DATA: BEGIN OF bdc OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
     END OF BDC.
*DATA: BEGIN OF BDC1 OCCURS 0,
      idnrk(18),
      MENGE(18),
      MEINS(3),
      postp(1),
      posnr(4),
     END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(001)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(001)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(001)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(001)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
      I tried with the sample code but i m not getting the required result.
    Can anyone give some other soln.
Code:
REPORT ZBOM2
no standard page heading line-size 255.
*include bdcrecx1.
TYPES: BEGIN OF TY_FLAT,      " structure for flat file
        STRING(200),
       END OF TY_FLAT.
TYPES: BEGIN OF TY_HEAD,     " structure for header file
        IND(2) TYPE N,
        MATNR(18),
        WERKS(4),
        STLAN(1),
       END OF TY_HEAD.
TYPES : BEGIN OF TY_ITEM,    "structure for item file
          IND(2) TYPE N,
          POSTP(1),
          IDNRK(18),
          MENGE(13),
          meins(3),
        END OF TY_ITEM.
TYPES :BEGIN OF TY_FLAT1,   " structure for final file
         MATNR(18),
         WERKS(4),
         STLAN(1),
         posnr(4),
         POSTP(1),
         IDNRK(18),
         MENGE(13),
         meins(3),
       END OF TY_FLAT1.
INTERNAL TABLE DECLERATIONS:
DATA : T_FLAT TYPE STANDARD TABLE OF TY_FLAT,
       T_FLAT1 TYPE STANDARD TABLE OF TY_FLAT1,
       T_HEAD TYPE STANDARD TABLE OF TY_HEAD,
       T_ITEM TYPE STANDARD TABLE OF TY_ITEM,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA with header line ,
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL.
WORK AREA DECLERATIONS:
DATA : ST_FLAT TYPE TY_FLAT,
       ST_FLAT1 TYPE TY_FLAT1,
       ST_HEAD TYPE TY_HEAD,
       ST_ITEM TYPE TY_ITEM,
       ST_BDCDATA TYPE BDCDATA,
       ST_BDCMSG TYPE BDCMSGCOLL.
VARIABLES:
DATA : FNAM TYPE LOCALFILE,           "rlgrap-filename,
       FTYP TYPE RLGRAP-FILETYPE,
       LF_FNAM TYPE STRING.
DATA : V_IND(2) TYPE N,                " value 1,
       V_FLD(20),
       V_NO(2) TYPE N.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = T_FLAT
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FLAT INTO ST_FLAT.
SPLIT ST_FLAT AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO ST_FLAT1-MATNR ST_FLAT1-WERKS
ST_FLAT1-STLAN ST_FLAT1-POSTP
ST_FLAT1-IDNRK ST_FLAT1-MENGE ST_FLAT1-MEINS.
APPEND ST_FLAT1 TO T_FLAT1.
CLEAR ST_FLAT1.
ENDLOOP.
SORT T_FLAT1 BY MATNR WERKS STLAN POSTP IDNRK MENGE MEINS.
LOOP AT T_FLAT1 INTO ST_FLAT1.
MOVE :
ST_FLAT1-MATNR TO ST_HEAD-MATNR,
ST_FLAT1-WERKS TO ST_HEAD-WERKS,
ST_FLAT1-STLAN TO ST_HEAD-STLAN,
ST_FLAT1-POSTP TO ST_ITEM-POSTP,
ST_FLAT1-IDNRK TO ST_ITEM-IDNRK,
ST_FLAT1-MENGE TO ST_ITEM-MENGE,
ST_FLAT1-MENGE TO ST_ITEM-MEINS.
AT new STLAN.
ADD 1 TO V_IND.
ENDAT.
MOVE V_IND TO ST_HEAD-IND.
MOVE V_IND TO ST_ITEM-IND.
APPEND ST_HEAD TO T_HEAD.
APPEND ST_ITEM TO T_ITEM.
CLEAR ST_HEAD.
CLEAR ST_ITEM.
ENDLOOP.
CLEAR V_IND.
*perform open_group.
SORT T_ITEM BY IND.
SORT T_HEAD BY IND.
DELETE ADJACENT DUPLICATES FROM T_HEAD.
LOOP AT T_HEAD INTO ST_HEAD.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              ST_HEAD-MATNR.
perform bdc_field       using 'RC29N-WERKS'
                              ST_HEAD-WERKS.
perform bdc_field       using 'RC29N-STLAN'
                              ST_HEAD-STLAN.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
LOOP AT T_ITEM INTO ST_ITEM WHERE IND = ST_HEAD-IND.
ADD 1 TO V_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-MENGE(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              ST_ITEM-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              ST_ITEM-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              ST_ITEM-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              ST_ITEM-POSTP.
CONCATENATE 'RC29K-IDNRK(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-IDNRK.
CONCATENATE 'RC29K-MENGE(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MENGE.
CONCATENATE 'RC29K-MEINS(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MEINS.
CONCATENATE 'RC29K-POSTP(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-POSTP.
V_NO = 1.
ENDLOOP.
CLEAR V_NO.
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR'
                              POSNR.
*perform bdc_field       using 'RC29P-IDNRK'
                             bdcdata-IDNRK.
*perform bdc_field       using 'RC29P-MENGE'
                             bdcdata-MENGE.
*perform bdc_field       using 'RC29P-MEINS'
                             bdcdata-MEINS.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                                 'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0133'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-matkl'.
perform bdc_field       using 'RC29P-SANKA'
                                 'zv01'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
*perform bdc_transaction using 'CS01'.
perform close_group.
CALL TRANSACTION 'CS01' USING t_bdcdata MODE 'A' UPDATE 'S'.
REFRESH t_bdcdata.
clear t_bdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR st_bdcdata.
st_bdcdata-PROGRAM = PROGRAM.
st_bdcdata-DYNPRO   = DYNPRO.
st_bdcdata-DYNBEGIN = 'X'.
APPEND st_bdcdata to t_bdcdata .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR st_bdcdata.
    st_bdcdata-FNAM = FNAM.
    st_bdcdata-FVAL = FVAL.
    APPEND st_bdcdata to t_bdcdata.
ENDIF.
ENDFORM.

Optimizing iweb 09 site for iphone use ?

Hi does anyone know how I can optimize my site for iphone use ?
At present the dimensions are fine but I cannot zoom in or scroll the portfolios ?
Any tips would be great !
My site is www.ruperteden.com
Thanks in advance !

edos wrote:
Hi does anyone know how I can optimize my site for iphone use ?
Apple says: +"You should read this document if you want your web content to look good and perform well on either the desktop or iPhone OS..."+ :
_Safari Web Content Guide_
Also bear in mind that Apple says: +"...if your webpage is less than 980 pixels wide causing it to scale too small on iPhone..."+
edos wrote:
My site is www.ruperteden.com
Rather than posting your URL like this:
www.ruperteden.com
...include the prefix to make it conveniently clickable:
http://www.ruperteden.com

Ringtones for iphone using pc

hi i can't seem to create real music 30 second ringtones for my iphone using my pc when i go to the itunes store it dosen't give me any songs to choose to create the ringtones - is it even possible to do this or do i need a mac?

many thx allan the web link you gave was helpful, the majority of the content was for mac but there was a link to a american site which had a program called iphoneringtones2.0 which seems to of done the trick for the moment it is however a third party program so i don't know how long it will last before itunes wipes the ringtones of my phone so APPLE ITUNES "SORT IT OUT!!" if your reading this i am happy to pay for ringtones but why do you make it so hard to have a song as a ringtone ps "great phone"
thanks again allan .......................................................ben

Creating Help for Iphone/Android app

I need to create help for an iPhone and Android app using RoboHelp 10.
Which option do I choose for a New Project: Blank Project or Application Help?
And, which output do I choose under "File > Generate"? I see an option for "Native Mobile App." But, I'm not seeing a "Multiscreen HTML5" option.
Which file do I give the developer?
Thanks for your help!

That's a pretty big question and you haven't given us any clues such as which version of RoboHelp you are using and whether it is just this form of help that is new to you or help in general.
It doesn't really matter whether you choose Blank Project or Application Help as they are just starters with different default topics and you will be trashing them anyway. For now let's say start with Blank Project and create your topics. You do need to keep in mind they will be viewed on various devices. More about that later.
When that is done you start thinking about creating a suitable output. Multiscreen HTML5 is the output in RoboHelp 10. RoboHelp 11 was released today and that has a new output, Responsive HTML5. That is simpler, especially first time out. Both of those types are intended for use where they will be viewed via a browser, be that on a desktop or a mobile device.
It is not clear whether you want your company's app to access help in that way or whether the need is for the help to be an app in its own right. The latter adds another layer of learning. Essentially after creating an HTML5 output, you use the script to create an app. From the questions you ask, I suspect you will need developer assistance with that.
Start by viewing my page at http://www.grainge.org/pages/authoring/html5/html5.htm where you can download a project with information inside, include some ideas about how to write content.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Creating graphics for iPhone from Photoshop

Hi, I'm putting together my first App for the iPhone and I have a question when it comes to exporting my graphics from Photoshop. I have looked all over the web place and I can't find a direct answer, I hoped that someone might have an idea in here? It is more of a Photoshop question but directly relates to the iPhone so here goes.......
My psd has the embedded colour profile - CHROMiX iPhone Aug08 as I have been advised to use from the web. From here all I want to do is export the graphic. I am exporting as a PNG-24. The exported graphic is either slightly washed out or much much darker. As this is my first time in doing it I don't know which is right, nor do I know why I am getting two different results.
Any help? Please! I am going round in circles.

Hello, Andy and welcome to the Discussions.
I would suggest that you ask for assistance in the developer forums to which you have access as a member of Apple's iOS developer's program:
http://developer.apple.com/devforums/
You'll be much more likely to get assistance there, particularly with such a very specific issue. This forum is really for people using the iPhone rather than for people developing for it.
Regards.

Creating ringtone for iphone

Hello,
I created a ringtone for an iphone and cannot get it to the ringtones on the phone. IF this is a Garageband issue can someone please help?
I created the file and saved to my desktop. (The phone I want the ringtone on is not my phone so I could not "share" with my itunes) I was able to send this file to the person that needs it and was able to download to their itunes. I then was able to move it to the iphone ringtones on the phone when it is sync'd to itunes. But, when I go looking for it on the phone, I can only find it on the ipod part of phone.
Did i do something wrong in Garageband or do I need to take this to iphone forum?
Thanks
Jim

You don't need to move it to the iphone ringtones , you can directly Click "Share" on the menu bar and select "Send Ringtone to iTunes".
More information about "Make Ringtone for iPhone with GarageBand on Mac"
Message was edited by: LynnLU

Creating IDOC for article using BD10 tcode

Hi Excperts,
we are creating idoc for the articles using bd10 tcode.
we are using idoc type ARTMAS05. But system not filling the segment E1BPE1MLEART Retail Data Transfer: Vendor-Specific EANs . Could you anyone help me , why sap standard program is dropping this segment.
do we need set up any data in material master for his segment. .
you will be rewarded.
Regards
Rama.

Hi Rama,
Generally if the segment is not being filled it is because the values do not exist.
The segment is not mandatory. So your IDoc should still be created.
Try:
By selecting the Send material in full indicator, you can also distribute the following dependent data for the material (depending on the type of system) in addition to the actual material master data:
Retail system
Listing conditions
Purchasing info records
Source list records
Purchasing conditions
Sales conditions
BOM allocations
Best regards,
Glynn

Create Budget for Grants Using BAPI_0036_CREATE

Hi Gurus,
Is there any people using BAPI_0036_CREATE to create budget for grants before? I use the test data to run it in test run mode, it is ok. But when I try to run it in batch commit mode, it always has error: "No instance of object type BudgetEntryDocGM has been created. External reference:" and "Specify grant". Definitely I already specified grant and external reference in both header and item input tables. If you ever use this BAPI before, please give me some suggestion.
Thanks,
Ryan

Well, it looks like customizing. The long text for FMKU 026 includes:
The customizing settings require that you specify a as an FM account assignment element. You did not enter a in your budget entry.
(It seems to be saying you have to add a grant somewhere in account assignment). This may also help with the other message.
There are also some notes for this BAPI.
Rob

Creating folios for iphone using a pdf-to-indesign script

Similar Messages

Maybe you are looking for