Creating GUI status

Hi
I am creating gui status in a function group from se80
I created same menu in two different gui statuses.
I want different fields in the menu.
I have 'goto' menu in first and second gui status.
I want different fields in the 'goto' menu in both gui statuses
when i change the fields of the menu in one gui status it automatically changes in the second guistatus
kindly help me,
thanks

Hi,
Try this..
Delete the second gui status...
Then create the second gui status by not copying...
add the menu and function codes one by one...and then when you enter the same menu..it will ask whether do you want to copy the existing menu or create new menu....here say create new menu....It should work..
Thanks
Naren

Similar Messages

  • How can i make a vertical line in Application Toolbar when creat GUI STATUS

    I see some standard UI have a separator vertical line in the  GUI STATUS--Application Toolbar?
    Could you tell me how can i creat it in my customer  GUI STATUS?
    TKS a million~~

    Hi.
    Please try.
    1)Change mode your GUI-STATUS.
    2)menu -> Edit -> Insert -> Separator line.

  • Creating GUI status menu - some entries are seen in red

    hi
    while creating menus in gui status, some entries are seen in red
    why these are in red, i dont know the reason
    cud u please help ?
    thanks

    Hi,
    These are inactive functions.  You can toggle them to Active/Inactive with the menu painter function F7.
    Regards,
    Jamie

  • How to put separator lines in menu items in a gui status ?

    Hi,
    I have created gui status for my z transaction
    I need the separator lines in the menu items like it is seen in std transactions
    For example, in any screen , in the Help menu, we can see the following.
    Application Help
    SAP Library
    Glossary
    (line)
    Release notes
    (line)
    SAP Service Marketplace
    could you please help me how to put the lines ?
    thanks

    Hi,
    Goto Your GUI status.click on your  MENU bar.
    under the menu bar you will have your own menu items.
    where ever you want separator line  do the following way.
    you will have 2 columns under menu bar
    1) code
    2) text.
    under code dont put anything.
    but under text column you put dashes and enter or select right click there and choose separator line.
    you will get separator line.
    activate and run the ztcode.you will get .
    code                                            text
    Application Help                         
    SAP Library
    Glossary
    Release notes
    SAP Service Marketplace
    Thanks
    Parvathi

  • GUI status for report

    Hi,
        I had created GUI status for output list in one report. its status is active in program but in report output this created status is not activated (Menu bar, application toolbar). Has anybody face this kind of problem before?
    Regards,
    Dilip

    hi,
    use command
    SET GUI-STATUS 'menu1' -> double click on menu1 ->select menu bar radio button from available radio buttons -> click on expand butt0n -> select required buttons n give function codes n select user-command optionfor those buttons ->activate -> back ->activate the report prgm.
    i think in our case you didn't activated the menu painter screen. check it once n dont forget to assign f.code n to give user-command after giving static text for buttons that u will use in prgm.
    if helpful reward some  points.
    with regards,
    suresh babu aluri.

  • Transport Screen objects-GUI status(SAP does not create request, why)?

    Hi experts,
      I use SE80 to change GUI status, but system does not create a transport request for me to transfer? why?

    Hi,
      Thanks for replay. Actually, the SE80->program->Gui status have some objects and they are already transfered. But I can't see them on target system. But When I create exactly the same name, the system tell me they are already created. I think it becuase the original language is 'DE' but I use default language 'EN' to modify and create the request?

  • Creating a cascading menu button an a GUI status

    I have a GUI status on a normal screen (NOT on an ALV grid).  On this status I have added 3 function buttons (SEARCH, CREATE, MANAGE).  I want to add a 4th button that appears and acts like a cascading menu button. An example of what I want the button to look like is similar to what you would see on the standard 'Change Layout' button on an ALV Grid.  I am not using an ALV grid, though - but I'm trying to get a button on the GUI status to act like that - where you click on it and you see multiple options such as Display, Edit, Copy.
    I don't want to add this to my MENU bar.  I'm trying to add it to my APPLICATION bar.  If anyone has ever done this, please let me know how you did it.
    Thank you for any helpful information.
    -P. Foley

    I think that is done with the "toolbar" control so it will be in the screen, not on the application bar... have a look at SAPTOOLBAR_DEMO1, and the CTMENU_* programs, plus
    http://help.sap.com/saphelp_sm32/helpdata/en/8f/bcc23657ad0730e10000009b38f839/frameset.htm
    for more info on this, if it is the style you want.
    Or perhaps look at Generic Object Services to add a button between the application bar and below the menu (as in ME23N, FB03 etc)
    Jonathan

  • How to get GUI Status(Push Buttons) in ALV Report

    Hi Friends
    I have a requirement in a way that:
    Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
    Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
    Can anyone throw some light how we can achieve this.
    Thanks for your cooperation!
    Regards,
    Madisetty

    data: rt_extab type slis_t_extab,
            g_ucomm like sy-ucomm ,
            g_selfield type slis_selfield.
    form alv_display .
      call function 'REUSE_ALV_LIST_DISPLAY'
         exporting
         i_callback_program             = g_repid
         i_callback_pf_status_set       = 'PF_STATUS'
         i_callback_user_command        = 'USER_COMM'
           it_fieldcat                    = it_fldcat
          tables
            t_outtab                       = it_final1
      perform pf_status using rt_extab.
      perform user_comm using g_ucomm g_selfield .
    endform.  
    form pf_status  using    p_rt_extab.
      set pf-status 'PF_STATUS' excluding p_rt_extab.
    endform.
    form user_comm  using    p_ucomm like sy-ucomm
                             p_selfield type slis_selfield.
      data: l_row type i.
      case  p_ucomm.
        when 'DISPLAY_PO'.
          loop at it_final1 into wa_final1.
            if wa_final1-sel eq 'X' .
              l_row = l_row + 1.
            endif.
            if l_row gt 1.
              message e004.
            endif.
            clear wa_final1.
          endloop.
          p_selfield-fieldname = 'SEL'.
          read table it_final1 into wa_final1 index p_selfield-tabindex .
          set parameter id 'BES' field wa_final1-ebeln.
          call transaction 'ME23N'.
      endcase.
    endform.
    *create user interface for gui status by double clicking on 'PF_STATUS'.
    *Check the above sample code .

  • Problem in GUI status

    hi folks ,
    i have created the GUI status for the program .. when i go on the out put screen i am not able to go back or cancel or exit , though i have created the GUI status and activated it as well .
    my program is designed to display the user action on screen and it displays the value in the text field which can only accept output no inputs .
    plz advice .
    Thanks,
    Abhishek .

    Hello,
    Make sure that the function codes in the GUI status are written in capital letters only.Similarly in the PAI of the screen,in the case statement,the function codes have to be written in capital letters.I hope you have written the user-commands as the functionality has to be coded by the developer when he makes the GUI.
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
    case ok_code.
    when 'BACK'.
    leave to screen 100.
    when 'EXIT'.
    leave to screen 0.
    when 'SAVE'.
    ....logic
    ENDCASE.
    endmodule.
    Regards,
    Beejal
    **Reward if this helps

  • How to copy GUI status to new program

    Hi all,
    In report A, i have GUI status with lot of menu bar activities. i need to create one more report B, with the same GUI status. Is there any option to copy/download from Report A to paste/upload to the new report B.
    Note: Both the Reports are in different SAP Systems.
    Please suggest.
    Thanks.
    Regards,
    Venkat
    Edited by: VENKATA PRASAD BATHINAPATLA on Sep 19, 2011 8:39 AM

    Hi,
    You can do this:
    go to Transaction se90. Drill down to Program library -> program sub objects -> Double click on GUI Status.
    In the program name enter Your PROGRAM NAME and press execute. now select check box beside <Your GUI STATUS which you want to copy>. and in the menu click on GUI Status -> Copy.
    Now copy it to ur B report pf status.
    or
    goto se80 select Program enter your program name then under GUI Status  right click on your gui ststus which you want to copy and press copy and enter your B Report name.,
    hope this helps u.,
    Thanks & Regards,
    Kiran

  • GUI status items are not displayed

    Hi all,
    Some parts of gui status are not displayed but some of them are displayed.
    What is the problem?
    Thanks.
    deniz.

    Hi snehi chouhan,
    I have created a program and two gui statuses for this.
    One of them is set at first display of report but not all items.
    Thanks.

  • What is the use of GUI status in Dialog programming

    what is the use of GUI status in Dialog programming,, how can it be used there,, as screen are alredy defined..

    Hi,
    The use of GUI Status is that when we have to change some thing in Menu Bar, Toolbar and Function Keys. Say For Example we have to create any Custom Button in the application toolbar etc.
    It can be used in Dialog Programming via defining the Status in the PBO module of the screen.
    eq. created a screen 9000
              on clicking it->
                                   PROCESS BEFORE OUTPUT.
                                             MODULE status_9000.
    On double clicking on this "Module status_9000" - you can write "SET PF-STATUS 'STATUS_9000'".
    Now u can create GUI staus with name "'STATUS_9000'".
    Let me know in case you have any further doubts.
    Thanks

  • Doubt on GUI status in Report

    Hi Friends,
    I have created a GUI Status for a Report program.
    I have written the functionalities for Application Tool bar.
    But i have not written any thing for my Functional Keys having Standard Tool bar will the keys in the standard tool bar will work as normal or it will get deactivated.
    Reward is sure.
    Thanks,
    Gokul

    Hi Gokul,
    If you are setting a PF status for a report then menu items and functional keys in the standard toolbar gets deactivated and depending upon ur requirement u can activate keys.
    And if you want to activate the functional keys  back, exit and cancel give the function codes as BACK, %EX and RW respectively in the PF Status you have defined and Activate the PFstaus.
    Now these functional keys start working normally and you need not write any code for these to work.
    If you want clarifications futher let me know.
    Reward me if useful.
    Regards
    Sandhya

  • GUI status local/global

    Is gui status that is created by us for a particular program is local for that progam or it is global, so that we can use it in other programs.
    Waiting for replies
    thanx in advance

    Hi,
    GUI STATUS are screen specific, different for each screen.  If u want to use same in other prg then copy gui status to that program in se80-gui status-status name - right click -copy.
    Hope it will helpu.
    Jogdand
    PS: Award if helpful

  • Regarding module pool programming,reports and gui status

    hi,
       I have created a mpp program in which i called a report using the SUBMIT statement.In the Report i have used Gui status for BACK.When i execute the MPP and press BACK it should call a another screen of the MPP,but it leaves to the program i.e., it comes out.
    example,
    case sy-ucomm.
    When 'BACK'.
    CALL SCREEN 0002.
    endcase.
    This is what i have used in my report program.
    Please help me,
    Thanks in advance,
    Aruna

    Hi.
    Change the name BACK because it is standard FCode.
    Try Changing the Fcode.
    Awrd Points if useful
    Bhupal

Maybe you are looking for