Creating HD images - recommendations?

Greetings,
I am a bit new to Photoshop Elements (I have used the full version of Photoshop for a number of years). My platform is OSX 10.9.
On my old computer I had a application that I could use to create HD (High Definition) images. The application would take (Canon) RAW files and allow me to import several of the RAW file and combine the images.
Will Photoshop Elements allow me to do this? If not Elements, does anyone have any favorite HD photo creation tools (for the Mac) they use?
Thank you,
Tim

You should be able to do that. You may need a raw plugin. Download the trial and give it a go.
See here:
http://forums.adobe.com/thread/1456562

Similar Messages

Disk Utility Error 61 when attempting to create disk image on external driv

I would like to make occasional archive backups of my three macintosh computers. I bought a new Western Digital 2TB drive for this purpose, and formatted it as Mac OS Extended. Trying to do a disk image backup using Disk Utility, I follow the directions:
- Startup from an install DVD.
- Start Disk Utilities and select "Restore"
- Drag "Macintosh HD" into the Source box
- Click on "New Image" and select compressed and 128-bit AES encryption
This leads to the error message: Unable to create "....." (error -61)
I have enocountered this problem both with my iMac G5 and a MacBook, both running Leopard.
Does anyone know what this error means, what I am doing wrong, and/or if there is another way to create disk image backups? Help!

1. For reasons I don't know disc images seem to become more fragile the larger they get. They also can be subject to file corruption that affects the entire disc image, whereas file corruption on a clone would only affect certain files.
2. You cannot put multiple clones on the same volume. Each clone must be on a separate volume, but you can have multiple volumes on a single drive simply by partitioning the drive accordingly. Of course you need a drive large enough to accommodate each clone. Each clone should be to a space equal to the capacity of the cloned drive.
3. I'm not a big fan of TM, although I must confess it has become more reliable since it's release, especially with Snow Leopard. However, there are many backup utilities that can create clones, perform incremental updates, and archive changed files. See the following:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
MimMac
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Trouble Creating System Image in Windows 8.1

My system: Satellite P55-A5312 with 750GB HDD, Windows 8.1 (upgraded from pre-installed 8.0), BIOS fw 1.90 (just updated)
Tried to create System Image: Start ==> Search ==> File History ==> System Image Backup ( in lower left corner of the screen). Successfully finds the 1TB backup drive (newly formatted at NTFS) attached via USB. Message says 204GB of space will be needed to store the image. (Note: 1TB is almost 5 times what is needed).
Start Backup ==> "The Backup Failed", "There is not enough disk space to create the volume shadow copy on the storage location, etc.).
I found the following thread in this forum: http://forums.toshiba.com/t5/System-Recovery-and-Recovery/System-Image-Fails-on-Windows-8-1-Pro/m-p/...
and am curious what the following recommendation means: "To work around this problem, increase the size of the OEM partition on the backup drive."
What OEM partition? My backup drive has a single NTFS partition consuming the entire capacity of the HDD. What am I doing wrong?
Solved!
Go to Solution.

After increasing the size of 1 partition, the System Image utility completed without error. To fully confirm, I need to try an image restore.
The long answer is noteworthy (refer to the attached). I used 3 different methods to query partition size and usage.
1. Disk Management shows that 4 of the 5 partiions are 100% free space. What I don't understand is how the System Image utility of Windows 8.1 understands the partition sizes/usage but Disk Management does not.
2. Macrium Reflect gives what appears to be an accurate representation of the partitions and their size/usage. It also includes a (hidden?) partition not shown in Disk Management, thus 6 instead of 5 partitions.
3. MiniTool Partition Wizard agrees for the most part with Macrium Reflect with two notable exceptions. It shows the 128MB partition has zero free space (vs 113.7MB = 89% free space using Macrium Reflect). This is a BIG difference. Also, the C partition showed slightly different usage than Macrium Reflect.
In the end, I used MiniTool Partition Wizard to modify 1 partition only (increase the 350MB partition to 414MB, resulting in a little more than the mandatory 50MB free space). The System Image operation then completed without error.
What baffles me is why 3 different utilities give different results of partition usage (I think they all agree on partition size). I would have never thought that determining partition usage was akin to rocket science, but perhaps it is...
Attachments:
PartitionInfo.pdf ‏241 KB

How to create Edit Image in my form

hi All,
I have a form with header and detail, in my detail block i need to add Edit Image in my form. When i click on this i should be able to open one of my text column.
can any one please help me how to create new images....

Siva,
There is a different Technology Stack associated with the Enterprise Business Suite (EBS). amitphynyl is correct with the description of how to create a button with the edit.ico assigned to it, but with the EBS, you will want to speak to your DBA to get a list of all the Icons that are available as you will have more icons with the EBS than are available with a standard install of Forms Builder 6i. I would also suggest you ask your DBA to give you a copy of all the Icons so you can add them to your Forms Builder installation so they will be available to you during design of your Form.
I would also recommend that you review the Oracle Applications User Interface Standards for Forms-Based Products guide in the Oracle Applications Documentation web site to ensure your Custom Form conforms to Oracle guidelines.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to create an image of my system

I want to create an image snapshot of my system as is
What apps/programs do I need?
Do I need an external hard drive to store the image?
Do I need bootable media?
On Windows, I use Acronis - do things work the same way in Mac world?
Thanks
Omar

The Mac world is much like the Windows world you are used to.
Included in the base OS are tools you can use to make backup images of your system, but they are not the easiest to use, and may not be the most efficient, but they are included. You can use the "Disk Utility" or the command line "dd" tool to make a backup image of your boot drive. You can download free utilities to make disk images of your system, like Clonezilla. You can also purchase "shareware" software like SuperDuper! or Carbon Copy Cloner to make system images too.
As with any backup image you make of your system, you will need some media to store it on. This is easiest if you use an external HD that is at least as large as your internal drive and then use one of the tools to make a bootable clone. Going this route gives you a couple benefits, the first being that if your internal drive fails, you can connect the external drive and boot your system from it as if it were the internal system drive and be back running an a few minutes. These can also come in handy to help troubleshoot problems.
I really recommend using the third party tools like Carbon Copy Cloner or SuperDuper!

How to create an Image that is available to multiple locations?

I can create an image from a virtual machine, but this image is only available to the location where the virtual machine was originally created (for example East US).
I want to create a single image that is available to multiple locations (East US, North Europe, Southeast Asia, etc...)
Is this possible? I've noticed that stock images are available to multiple locations, can user images be configured in the same way?
Thanks

hi,
As far as I know, it is not supported currently. But you could use a compromise method. You could copy the Image into other regions storage account. Then you could create the VM using yourself Image. But you may be charged the outbound data. I recommend
you could refer to this thread (http://social.msdn.microsoft.com/Forums/en-US/04956637-45c5-40c9-9422-5b1c4de681bf/how-to-move-virtual-machine-to-a-different-region?forum=WAVirtualMachinesforWindows
Hope it helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Trouble Creating Padded Images for iMovie

i am having trouble creating "padded" images to add to iMovie 09. I followed the directions here (https://discussions.apple.com/message/10699725?messageID=10699725#10699725?messa geID=10699725) which recommend the following:
Set up an Automator Workflow to
1. Ask for Photos (You must select one or more photos and hit Select - you can make this easier by putting them in an album beforehand)
2. Copy Finder Items (give it a folder to copy to- so you can find them easily)
3. Pad Images. (put a check mark in "scale image before padding" and set for dimensions of your project.
Hit Run and a dialog box will come up asking you to select photos. When you are finished, press SELECT and the Automator script will keep running.
However, each time I run the script I get the following error: The action "Pad Images" was not supplied with the required data."
My files are .jpg and I am running OS X. Any suggestions on what I might be doing wrong?

If you want a quick response it might make sense to try and contact user TessB directly. I say that only as that person was the one that proposed the Automater Workflow workaround, and that's not exactly something here can answer (Maybe the folks in another forum related to Autmator might be able to help). Unfortunately some solutions aren't as generic or easy to use for everyone as they are for the person who has written them up. I call it the "Works for Me" problem.

Cannot create disk image iDvd 7.1.2 (multiplex error)

I'm at my wits end and extremely disappointed.
Basically, I've gone through the threads that I can find, I'm down to importing a basic movie directly into iDvd. No menus. No options enabled (that I'm aware of).
When I go through the iDvd process of creating a disk image all goes smoothy until the very end when I get a multiplexor error (no error code or text saying why).
Extremely frustrating. This is on a new Macbook Pro running 10.7.2. I don't have problems with my other Apple systems, just this new one. Perhaps Apple would like to take it back??

Hi
Multiplexing Error
Multiplexing error is a very complex problem due to many things (long long list following) -
one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Which is the best app to create cartoon images on that i can move around to other apps and animate to create cartoons

which is the best app to create cartoon images on that I can move around to other apps and animate. I want to create the image only, no background or anything

Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini

How do I Create interactive images to be used in another website?

Our office is contracted with a simple website company, so from the begining the framework is there. I want to add an interactive map that has each county hyperlinked to information about that area. I was told that Dreamweaver is the program I would need in order to create it.
So, I have the program now but every tutorial I read is about making your own website in dreamweaver and I can't find anything about how to create the image to upload into a different website.
Anyone know how to do this????
Thank you!

This helps, thanks. I have the content on the web page (where the hyperlinks will attach to), I have the image of the map, and I am making the shapes for the hotspots, just not how to get it all to link up.
Also, when I saved a trial (just to make sure it would all work) it doesn't successfully upload as an image onto the website, just a little box with a red X. Any more thoughts anyone?

Class casting, creating an image and decompiling...

Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the implementation of the methods? Is it always possible to fully decompile a class file? When is it and when not?
2)
I aks this questions before, but I still haven't got it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass which extends the java.awt.Image class, which has abstract methods. How do these methods(for example getGraphics etc) have to be implemented?
3)
I can't cast a Image to cMyClass... why not?
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100, 100);
and that this worked... I tried to do this too, and it seemed to work, but it actually didn't!!
I found out that c.createImage returns a null reference!!! That's why Java was able to cast it to my own cMyClass (not a problem to cast a null to something else), but when I created a Image (by doing a lot of unnessacary difficult stuff), and then tried to cast this Image to cMyClass it throw a ClassCastException or something like that...
How can I cast the java.awt.Image class to my class anyway?
3)
Why can't you create a image like i've done above or even like below:
Canvas c = new Canvas()
Image oImage = c.createImage (100, 100);
Why does this return a null reference?
Isn't there a better way to create an image?
4)
The getWidth and getHeight need a I thought observer...? Why is this? I just want the width and height and don't have an observer or something like that. Is there a way around this?
I tried getWidth(null) but this returns -1
Please help! :)

Hi, I've got a couple of questions:
1)
How can I fully decompile classes, so with the
implementation of the methods? Is it always possible
to fully decompile a class file? When is it and when
not?You can always get a dump of the bytecode with 'javap -c'. If you don't want to figure things out yourself, try searching google for a class file decompiler, possibly a de-obfuscator.
De-compilation is completely possible if the original author wanted that, by including debugging information. Depending on the degree of such information and the amount of code obfuscation, the decompiled code may lack variable names, line numbers, field and method names, class names, and even code structure. Names and line numbers are usually not re-creatable automatically, since the information is simply lost, but you can replace them with your own strings when analyzing an unknown class file (using the correct tools). Re-creating the original code structure may work in some cases, but to me the general case looks rather close to the halt problem (i.e. not solvable).
Use a de-obfuscator, hope you've got good luck, and analyze the bytecode manually if that doesn't work.
2)
I aks this questions before, but I still haven't got
it working, so sorry, but I ask it again :) :
I want to create my own class, for example cMyClass
which extends the java.awt.Image class, which has
abstract methods. How do these methods(for example
getGraphics etc) have to be implemented?I don't really understand the problem. 'abstract' means on the language level that your subclass must provide an implementation, i.e. a method body. What that method is expected to do is explained in the javadocs for Image. But in fact you're free to do anything. You could play a sound in the getWidth() method (replace with any method name if you want). Just consider the fact that a lot of code calls getWidth in the hope of getting the width of the image, not playing a sound. So much about the language level.
On a higher level, a subclass of Image should implement a certain way to describe an image. AFAIK this means that your code must know the size of the image and know how to produce the pixels of the image. I can't tell you in general how you must do this, because it depends on your special case. This boils down to the question, why do you want to write a subclass of 'Image'? What new way of describing and image have you come up with?
3)
I can't cast a Image to cMyClass... why not?Simple, and that's certainly not an ALT. Because that specific Image is not a cMyClass. It's probably a BufferedImage or similar that was produced by AWT.
Please read the specs carefully what casting is about.
Someone told me he did the following:
Canvas c = new Canvas()
cMyClass oImage = (cMyClass) c.createImage (100,
100);
and that this worked... I tried to do this too, and it
seemed to work, but it actually didn't!!
I found out that c.createImage returns a null
reference!!! That's why Java was able to cast it to my
own cMyClass (not a problem to cast a null to
something else), but when I created a Image (by doing
a lot of unnessacary difficult stuff), and then tried
to cast this Image to cMyClass it throw a
ClassCastException or something like that...
How can I cast the java.awt.Image class to my class
anyway?You can't, and if you understood casting then you'd understand that it wouldn't make sense.
3, 4(don't know)
Maybe stupid question, but for example the BufferedImage, is this
completly written in Java?
How is the link made between the OS+hardware and the Java code? I
mean, displaying images etc. is very platform dependend not?Look for JNI (Java Native Interface). It's a way to link native (e.g. C) code with Java code.

Unable to create Disc Image from DVD

I get the following error when trying to make a copy of a family wedding DVD. I'm using Disc Utility and creating the image as a DVD/CD master (.cdr) file. It gets to about 3/4 of the way and then gives the following error.
The internal drive is a PIONEER DVD-RW DVR-K05
Sep 10 22:13:24: Disk Utility started.
Creating Image “Wedding of xxx & xxx.cdr”
Reading VOLUME_IDENTIFIER (Apple_UDF : 0)...
Unable to create “Wedding of Sarah & Federico.cdr” - Input/output error.
I've tried twice now and the same error. Looks like I might have to use Toast/Popcorn etc?
Thanks,
Darren
iMac G5 2.1GHz 1Gb RAM 260Gb HDD Mac OS X (10.4.7)

I do not know what that error means. However, if you open up the Disk Utility & go into it's Help Menu & in the search field type duplicating a CD or DVD. There you will find detailed instructions on how to create a disc image from a DVD.
Good possibility your answer may be found there and/or there may have been something you missed in creating a disc image.
Good luck.

How can I create an image gallery with "next" buttons?

So I am almost done with my portfolio site (YES!)..now I just need the actual content (the images). My site is written in AS3.
I've watched many tutorials on how to create an image gallery (auto scrolling ones, scrolling ones that require mouse hover, etc etc), but those aren't what I am looking for.
I want a gallery that looks exactly like this one here:
http://jalbum.net/res/help/integrating-tutorial.html
I have a lot of work to display in my porfolio so there must be arrows at the end of the thumbnails so I can add more stuff. So I am just stumped on how to make the image gallery work with the ability to scroll for more photos with the click of the arrows.
Any ideas? Thank you.

Watching tutorials and learning from them are two different things. If you have learned from them you should be able to use what you have learned to devise a gallery such as the one you link to. If you have learned from them and cannot use what you learned, then you probably need to find/learn more.
If you study the design you linked you should be able to reason out what elements you need to devise... it is not overly complicated.
For the large picture you could have a Loader into which you load whatever image is selected from the thumnails. To get a brief transition you could just set the alpha of the Loader to 0 when an image change is occuring and gradually fade it in after the image has loaded.
The greatest challenge you are likely to face is in getting the thumbnails to advance back and forth depending on which is selected. All of the thumbs would be placed in a container (movieclip or sprite) and that would be masked so that only a portion of them is visible.
All thumbs that are not selected have their alpha property set to some value less than 1. Selecting one calls for the file it associates with to be loaded into the Loader. If the choice happens to lie off screen, then you need to move the movieclip that contains all of the thumbs some set value in the right (+x) or left (-x) direction.
If you want the thumbnails to wrap infinitely then when one leave the thumbnails area for movement in a direction, you need to take that thumb and relocate it to the other end of the thumbs in the container.

Problem in creating 1 image using differnt images

Dear Fellows I want to create an image by using different images in byte array format. Images may be transparent or normal images. I want final result in byte array. I am using the following technique which is working fine but the problem with this technique is that it takes too much time to create an image. This is because I am using MediaTraker. If I delete the code of MediaTracker then program have undeterministic behavior i.e, sometimes it create the final image properly and sometimes nothing is displayed in final image.
I need some help from you. If anyone of you know the technique to draw image using different images without using mediaTracker kindly let me know.
Early replies will be appreciated
// here is the sample code which i m using for creating image
byte[] backgroundImage= // read 800 X 600 image from disk and convert it in to byte array
byte[] image1 = // read 200 X 200 image from disk and convert it in to byte array
byte[] transparentImage // read 300 X 300 transparent image from disk and convert it in to byte array
Image img=null;
Frame frame =new Frame();
frame.addNotify();
//creating BufferedImage object to store Final image
BufferedImage requiredImage= new BufferedImage(800,600,BufferedImage.SCALE_SMOOTH);
//get Graphics of BufferedImage created above
Graphics2D g=(Graphics2D) requiredImage.getGraphics();
///// begin draw back ground image
img=Toolkit.getDefaultToolkit().createImage(backgroundImage);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw background starting from x=0, y=0 with 800 X 600 dimentions
g.drawImage(img,0,0,800,600,null);
////////// end draw background image
////////// begin draw image1
img=Toolkit.getDefaultToolkit().createImage(image1);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw image1 starting from x=10, y=10 with 200 X 200 dimentions
g.drawImage(img,10,10,200,200,null);
//////////// end draw image1
//////begin transparentImage
img=Toolkit.getDefaultToolkit().createImage(backData);
try
MediaTracker mt = new MediaTracker(frame);
mt.addImage(img, 0); // adds image with ID 0
mt.waitForID(0);
}catch(Exception myex)
myex.printStackTrace();
//draw transparentImage starting from x=400, y=0 with 300 X 300 dimentions
g.drawImage(img,400,0,300,300,null);
///end draw transparent image
byte []finalResult = //convert requiredImage into byte array;
you can mail me the solution on my email address [email protected]
thanks with best regards
and waiting for someone to reply
kamran zameer

is there anyone on this forum to help me??????
regards,
kamran zameer

Is there a way to create an image of a CC installer that way I can install without internet?

I work for a college that has a department of over 100 mac computers currently runing 10.6 and above. I am the IT here and am in charge of installing all programs the students use, so ease of installation helps. I know I can install using an internet connection and it seems pretty simple, my issue is that if for some reason I dont have internet connection in the department I wouldnt be able to install the programs. What I want to know is if I can somehow create an image for the CC softwares, such as Photoshop CC, that way I can create more images of that installer, put them onto external hardrives and install that way without using internet. hope thats enough information, thanks for the help.

Direct Download Links for Adobe Software
For proper deployment, sign up with the dev center/ enterprise deployment.
Mylenium

Creating HD images - recommendations?

Similar Messages

Maybe you are looking for