Creating HUM Pollers failing

Hi Everyone, We are running LMS 3.2 in a solaris environment. When attempting to create pollers in HUM we recieve an error message stating "Unable to update the database, Check the upm_process.log for more details. To try to correct the problem we reset the HUM database by executing the following "NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=upm dmprefix=UPM" Once resetting the DB we still experience the same error. We checked the upm_process.log file and found the following errors related to columns in the database that can not be null. We are unsure of the next steps to take to correct the problem. Has anyone ever experienced the errors below when trying to create HUM pollers ? Thanks for the help - John
[ Dec 16 08:24:40 EST 2009 ],ERROR,[Thread-245],com.cisco.nm.upm.pollermgmt.PollerMgmtServerUtil,addPoller,990,[Sybase][ODBC Driver][SQL Anywhere]Column 'Instance_Name' in table 'Poll_Units_Table' cannot be NULL Error code -195java.sql.SQLException: [Sybase][ODBC Driver][SQL Anywhere]Column 'Instance_Name' in table 'Poll_Units_Table' cannot be NULL
[ Dec 16 08:24:40 EST 2009 ],ERROR,[Thread-245],com.cisco.nm.upm.pollermgmt.PollerMgmtServerUtil,addPoller,992,Rolling back the changes
[ Dec 16 08:25:49 EST 2009 ],ERROR,[TP-Processor16],com.cisco.nm.upm.pollermgmt.uii.helper.PollerMgmtUtil,addPoller,1312,Exception in adding poller:POLLERMGMT_ERR_DBUPDATEUnable to update the database. Check the upm_process.log for more details.
at com.cisco.nm.upm.pollermgmt.PollerMgmtServerUtil.addPoller(PollerMgmtServerUtil.java:997)
at com.cisco.nm.upm.pollermgmt.UPMPollerManagerSvc.addPoller(UPMPollerManagerSvc.java:113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.cisco.nm.xms.ctm.common.CTMRequestProcessor.executeCall(CTMRequestProcessor.java:546)
at com.cisco.nm.xms.ctm.common.CTMRequestProcessor.handleRequest(CTMRequestProcessor.java:240)
at com.cisco.nm.xms.ctm.server.CTMServer.execute(CTMServer.java:401)
at com.cisco.nm.xms.ctm.server.TCPChannel.executeTask(TCPChannel.java:87)
at com.cisco.nm.xms.ctm.server.ThreadPool.run(ThreadPool.java:72)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: [Sybase][ODBC Driver][SQL Anywhere]Column 'Instance_Name' in table 'Poll_Units_Table' cannot be NULL
at ianywhere.ml.jdbcodbc.IIPreparedStatement.internalExecuteBatch(Native Method)
at ianywhere.ml.jdbcodbc.IPreparedStatement.executeBatch(IPreparedStatement.java:319)
at com.cisco.nm.upm.pollermgmt.PollerMgmtServerUtil.addPoller(PollerMgmtServerUtil.java:939)
... 11 more

It could be that you have a bad HUM installation. Exactly how are you creating these pollers? What templates are you using?

Similar Messages

Creating FRCommon system failed - in 11g Forms & Report Installation

Dear all,
When installing 11g Forms and Reports "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
I have successfully created the weblogic server 10.3.5 , and continued with 11g forms & reports. First Installed the forms & reports software, and i try to configure. after several steps of configuration i have failed when its place "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
What it is this Error.
Kindly help me.
My OS Windows
Forms and reports 11gR2
More info
When i start the configuration i have chosen Forms & Reports server and Development tools in the configuration page along with OHS.
Regards
Hamid

Hi experts,
I have the same problem when I try to install oracle Fusion Middleware 11g, is it possible that I forget some steps before, or should I install required something before continue intallation?
Best Regards.
Karim.

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
     Yes
2) is your database currently running on the same physical cluster node as your CI?
    No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
     Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

Creating Domain step fails while trying to install OBIEE 11g (11.1.1.5)

Hi Everyone,
I am really stuck at a point from where I do not know which route to take. I am trying to install OBIEE 11g (11.1.1.5) on my Windows 7 (32-bit) laptop. I have tried all the options:
1. Simple Install
2. Enterprise Install
3. Software only install (after installing Weblogic 10.3.4.0 separately)
Everything goes well till the step Bi Configuration->Creating Domain.
In this process whenever it reaches the stage when it tries to start Node Manager, it starts getting java exceptions and fails. It typically occurs when it does not find the nodemanager.properties file and tries to save the configurations there. It then encounters a Fatal Error.
Excerpt from install2011-07-29_06-13-21PM.out
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Launching NodeManager ...
Properties: {ListenPort=5556,NativeVersionEnabled=true,NodeManagerHome=C:/FusionMW/wlserver_10.3/common/nodemanager,StartScriptEnabled=true,}
Command: C:\FusionMW\JROCKI~1.2-4\jre\bin\javaw.exe -classpath "C:\FusionMW\JROCKI~1.2-4\jre\lib\rt.jar;C:\FusionMW\JROCKI~1.2-4\jre\lib\i18n.jar;C:\FusionMW\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\FusionMW\JROCKI~1.2-4\lib\tools.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\FusionMW\WLSERV~1.3\server\lib\weblogic.jar;C:\FusionMW\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\FusionMW\WLSERV~1.3\server\lib\webservices.jar;C:\FusionMW\modules\ORGAPA~1.1\lib\ant-all.jar;C:\FusionMW\modules\NETSFA~1.0_1\lib\ant-contrib.jar;C:\Users\SUCHAT~1\AppData\Local\Temp\.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\FusionMW\utils\config\10.3\config-launch.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\FusionMW\WLSERV~1.3\common\derby\lib\derbytools.jar" weblogic.NodeManager "-v"
NMProcess: <Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
NMProcess: Jul 29, 2011 7:21:31 PM weblogic.nodemanager.server.NMServerConfig initDomainsMap
NMProcess: INFO: Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig
NMProcess: INFO: Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true
NMProcess: <Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: WARNING: Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.
NMProcess: <Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer <init>
NMProcess: INFO: Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'
NMProcess: <Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess:
NMProcess: Jul 29, 2011 7:21:35 PM weblogic.nodemanager.server.NMServer main
NMProcess: SEVERE: Fatal error in node manager server
NMProcess: java.lang.NullPointerException
NMProcess:      at java.util.Hashtable.containsKey(Hashtable.java:314)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
NMProcess:      at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
NMProcess:      at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
NMProcess:      at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
NMProcess:      at weblogic.NodeManager.main(NodeManager.java:31)
NMProcess: Stopped draining NMProcess
NMProcess: Stopped draining NMProcess
Successfully launched the Node Manager.
The Node Manager process is running independent of the WLST process.
Exiting WLST will not stop the Node Manager process. Please refer
to the Node Manager logs for more information.
The Node Manager logs will be under C:\FusionMW\wlserver_10.3\common\nodemanager
Node Manager starting in the background
Excerpt from nodemanager.log which is created at <WL_HOME>\common\nodemanager:
<Jul 29, 2011 7:21:31 PM> <INFO> <Loading domains file: C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.domains>
<Jul 29, 2011 7:21:35 PM> <INFO> <Loading identity key store: FileName=C:/FusionMW/WLSERV~1.3/server\lib\DemoIdentity.jks, Type=jks, PassPhraseUsed=true>
<Jul 29, 2011 7:21:35 PM> <WARNING> <Node manager configuration properties file 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties' not found. Using default settings.>
<Jul 29, 2011 7:21:35 PM> <INFO> <Saving node manager configuration properties to 'C:\FusionMW\wlserver_10.3\common\nodemanager\nodemanager.properties'>
<Jul 29, 2011 7:21:35 PM> <SEVERE> <Fatal error in node manager server>
java.lang.NullPointerException
     at java.util.Hashtable.containsKey(Hashtable.java:314)
     at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList(NMServerConfig.java:491)
     at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList(NMServerConfig.java:481)
     at weblogic.nodemanager.server.NMServerConfig.getConfigProperties(NMServerConfig.java:545)
     at weblogic.nodemanager.server.NMServer.<init>(NMServer.java:154)
     at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
     at weblogic.NodeManager.main(NodeManager.java:31)
After this it hangs for a long time before finally coming up with Node Manager Server Timed Out error and finally the Creating Domain step fails.
One thing that I have noticed is that whenever it tries to create the nodemanager.properties or write to it it encounters this error and hence the nodemanager.properties file is also not getting generated.
I have ensured that there are no spaces in the TEMP and TMP paths. I even tried creating and putting the nodemanager.properties file in the location but that too does not work.
Strange part is that when I install Weblogic separately and have nodemanager as a windows service, then with the nodemanager.properties that I created the windows service runs, but the OBIEE installation still fails.
Any help on this would be greatly appreciated.
Thanks and regards,
Subho

My problem is "creating domain is failed". I guess that the issue with windows 7 32 bits on laptop doesn't configure and run nodemanager. I tried to start nodemanager but don't work (with weblogic scriptinf tools WST). However, Weblogic run ok but nodemanager is inactive. Also it doesn't create nodemanager.propierties. If I create a file nodemanager.properties (or I copied on directory obiee_home\ws_server_10.3\common\nodemanager) obiee installer configures its parameters pre-configured (if I modify a parameter, the installer modify it a default value and I don't know where is these parameters and its definition).
I have installed obiee simple and enterprise and it don't work. I have installed on oracle 11g R2 (desktop and enterprise with datawarehouse) and obiee installer doesn't work. Further this installation obiee delay an hour and then generates error in my case "creating domain is failed".
I'm going try to run install obiee 11.1.1.5 on windows 7 xp mode.
Important: We need help of oracle experts or Oracle communicates if obiee installs or not on windows 7 32 bits laptop because We have wasted
Thanks if anyone help us!!

VPN connection created with CMAK fails to update routing table on Windows 8.1 with error 8000ffff

When my clients connect their CMAK-created VPN, it fails to run the script to set their routing table with the following error:
Custom script (to update your routing table) failed (8000ffff)
My objective is to create a VPN connection with split tunneling - does not use the VPN connection as the client's default gateway.
All my clients are on Windows 8.1 64-bit, and are logged in with Administrative privileges
My VPN Clients are on 10.242.2.0/24, my internal network is on 10.172.16.0/24
I want only traffic for 10.172.16.0 to go via the VPN. Everything else should go via the client's internet connection
My Connection Manager Administration Kit profile, was created on Windows 2012 R2 CMAK with the following settings:
"Make this connection the client's default gateway" is UNticked on the IPv4 tab.
Define a routing table update is specified with a text file containing:
+++ Start of txt file +++
REMOVE_GATEWAY
add 10.172.16.0 mask 255.255.255.0 default metric default if default
+++ End of txt file +++
The txt file is saved in DOS/Windows format (not Unicode or UTF-8 which I've read causes problems)
I've tried everything in lower and upper case in the txt file after reading that the file might be case sensitive
The following appears on the client with logging enabled:
[cmdial32] 10:42:34
03 Pre-Init Event CallingProcess = C:\WINDOWS\system32\rasautou.exe
[cmdial32] 10:42:40
04 Pre-Connect Event ConnectionType = 1
[cmdial32] 10:42:40
06 Pre-Tunnel Event UserName = UserName Domain = DUNSetting = VPN (L2TP x64 NoGW) Tunnel DeviceName = TunnelAddress = vpn.mydomain.tld
[cmdial32] 10:42:43
07 Connect Event
[cmdial32] 10:42:43
09 Custom Action Exe ActionType = Connect Actions Description = (none) ActionPath = CMDL32.EXE. The program was launched successfully.
[cmdial32] 10:42:43
08 Custom Action Dll ActionType = Connect Actions Description = to update your routing table ActionPath = C:\Users\UserName\AppData\Roaming\Microsoft\Network\Connections\Cm\VPN64\CMROUTE.DLL ReturnValue
= 0x8000ffff
[cmdial32] 10:42:43
21 On-Error Event ErrorCode = -2147418113 ErrorSource = to update your routing table
[cmdial32] 10:42:43
13 Disconnect Event CallingProcess = C:\WINDOWS\system32\cmdial32.dll
Where can I find out what error codes 8000ffff or -2147418113 mean?

That was it. Thanks, Steven
"By default, the dial-up entry and the VPN entry have Make this connection the default gateway selected.
Leave this default in place, and remove any gateways by using the REMOVE_GATEWAY command in the routing table update file itself."
It seems counter-intuitive to leave
Make this connection the default gateway selected, when I specifically don't want that behaviour, but leaving it selected and using REMOVE_GATEWAY works for me.

OIM 11g configuration failed. Create domain step failed

Hi,
I'am facing problem in OIM installation. Here is the description of error :
Create Domain step failed
Bootstrap Domain Configuration
Log
Config Action Bootstrap Domain Configuration started
Create Domain
Error
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
Log
Create Domain
Step Create Domain started
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
Step Create Domain failed
The log file (C:\Program Files (x86)\Oracle\Inventory\logs\install2012-06-07_03-49-05PM.log) showed the following message :
[2012-06-07T16:10:46.953+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationStatus] [OOB IDM CONFIG EVENT] onConfigurationStatus ->24938fb1-a72a-427a-b318-a098773c53f6 StatusMsg:Starting Domain.
[2012-06-07T16:10:46.953+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] reportStartConfigAction: EXIT........
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0]
[2012-06-07T17:49:23.328+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3040)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.idm.install.config.BootstrapConfigManager.doExecute(BootstrapConfigManager.java:690)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:371)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:64)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:160)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
[2012-06-07T17:49:23.328+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: IdMProvisioningEventListener] [SRC_METHOD: onConfigurationError] ENTRY 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> configGUID 24938fb1-a72a-427a-b318-a098773c53f6
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] ErrorID: 35091
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] Description: [[
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] ________________________________________________________________________________
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> eventResponse ==oracle.as.provisioning.engine.ConfigEventResponse@8ae380
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Configuration Status: -1
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> Asking User for RETRY or ABORT
[2012-06-07T17:49:23.328+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [OOB IDM CONFIG EVENT] onConfigurationError -> ActionStep:Create_Domain
[2012-06-07T17:49:23.328+05:30] [as] [TRACE] [] [oracle.as.provisioning] [tid: 19] [ecid: 0000JV6Xsj8Fs1WFLz7U8A1Fo80i00000A,0] [SRC_CLASS: oracle.as.idm.install.config.event.IdMProvisionEventListener] [SRC_METHOD: onConfigurationError] [OOB IDM CONFIG EVENT] onConfigurationError -> wait for User Input ....
Thanks in advance for help.
Thanks and Regards,
Prasad
Edited by: 938380 on Jun 7, 2012 5:52 AM

actually when i restarted the configuration the test passed for create domain but it went on to fail in the apply java required file step
here is the link to the thread : OIM 11g configuration failed. Apply java required files step failed
Hoping for your help.. and thanks for the suggestions..
Regards,
Prasad

How to create a pass fail criteria

After visually analyzing a particle i.e. its area I need to decide if the particle passes or fails the inspections. How do I create a pass fail criteria after "Particle Analysis" in LabView? Thanks

Here is a VI that will demonstrate what you might consider doing.OH buy the way the guy I was talking about is doing research now at UC davis. I hope this will help you out. I would also be interested in other comments as well.
Joe
Joe.
"NOTHING IS EVER EASY"
Attachments:
pass_fail_crit_with_array.vi ‏46 KB

Encountered an error in repository runtime extension;Create LLang procedure failed

Hi Guys
I am implementing Apriori algorithm through graphical way. My model is validated but while activating this i am getting the error' Encountered an error in repository runtime extension;Create LLang procedure failed' Here i am attaching the model which i have created.
Regards
Karuna

Hi Folks,
I resolved this issue by setting schema as _SYS_AFL... Thanks for your help.
Regards
Karuna

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

Creating project site failed in Project Server 2013

Hi Folks!
I save project site as template (even tried without making any change) and it seems a very common error but what it refering to in Queue Jobs error field below, it isn't! I had one SharePoint list on root site and all sub-site (project site) add stuff to
it through a custom web part. All is working good on staging server. But while moving on production and I guess (drunk probably! :() mistakenly deleted workflow column. I deleted the whole list now, removed all web parts, even created new instance of pwa :O
same error. Anyone who can guess any solution!!!
CreateWssSiteContent: Creating project site failed! Project Uid=33f076b2-3929-e411-93f4-3440b5c8d286, site URL=http://hqepm/PWA/Project 123, site name=Project
123. System.Runtime.InteropServices.COMException (0x8107058A): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Column _ApprovalOutcome_ does not exist. It may have been deleted by another user.
http://hqepm/PWA/Project 123 at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId)Microsoft.SharePoint.SPException: Column _ApprovalOutcome_ does not exist. It may have been deleted by another user.
http://hqepm/PWA/Project 123 --->
Thanks, Kashif

Hi Christoph,
I apologise I should have posted the solution here. However, yes indeed I did solve it. As far as I remember I went through the Recycle Bin of SharePoint and restored the deleted List which contains the column, error was refering to and all started working
fine. I guess I recreated a new list and didn't touch the restored one, may be beause of fear factor :)
Hope this helps you and others.
Thanks
Thanks, Kashif

OVI Suite "Creating the Contact Failed"

Hi everyone!
I'm having some issues with the OVI suite when I try to create a contact and sync it with my phone. (Nokia 6720 Classic).
I can view the contacts on the device, but when I try to sync, copy or create a new contact on the computer it gives me an error saying "Creating the Contact Failed". Does anyone have a workaround this or having the same problems?
My system details are:
Nokia Ovi Suite 2.0.1.35
PC Connectivity Solution 9.39.0.0
Connectivity Cable Driver 7.1.20.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.35.0
Nokia mPlatform 2.5.195
Ovi Desktop Sync Engine 1.0.0.684
Operating system:
Microsoft Windows Vista 32-bit Edition, Service Pack 2
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.6001.18865 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 6.0.6000, Build: 16386)
- Toshiba (Version v5.00.10(SO))
Thanks in advance.

I have the same problem. I use E51 and the same version of Ovi Suite. It created thousends of task.
Here are the application and system details:
Nokia Ovi Suite 2.0.1.35
Nokia PC Suite 7.1.30.9
PC Connectivity Solution 9.39.0.0
Connectivity Cable Driver 7.1.20.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.35.0
Nokia mPlatform 2.5.195
Ovi Desktop Sync Engine 1.0.0.684
Operating system:
Microsoft Windows XP 32 bites kiadás, Service Pack 2
Language: English
Internet browsers:
- Microsoft Internet Explorer 6.0.2900.2180
- Mozilla Firefox 3.5.5 (Default)
Bluetooth version:
- Microsoft (Version: 5.1.2600, build: 2180)

Creating OD Replica fails

Hi,
We recently had a drama with our OD master which rendered it unusable so we're now running with one of our OD replicas promoted to master.
We had two other servers which successfully bound as replicas to the new OD master but they didn't replicate following the initial replication. I converted them back to stand-alone servers and then tried to join them as replicas again.
Initially, I got the "augmented user record" error but manual removal of replica entries through Directory Utility corrected that.
However, I still can't get the servers to join as replicas. Using Server Admin, the replication process gets so far and then stops with no error message. Creating replica via command line gives the output below.
Any ideas? Is it the Kerberos realm that's killing this? I'm not using SSL anywhere and nothing has changed on the OD master since the initial replica creation.
TIA,
Stu
odreplica:~ badger$ sudo slapconfig -createreplica newodmaster.company.com diradmin
diradmin's Password:
2012-11-23 22:16:55 +0000 command: /usr/sbin/sso_util info -r /LDAPv3/ldap://newodmaster.company.com -p
2012-11-23 22:17:07 +0000 command: /usr/sbin/sso_util info -r /LDAPv3/128.56.0.201 -p
2012-11-23 22:17:07 +0000 1 Creating computer record for replica
2012-11-23 22:17:12 +0000 Added computer password to keychain
2012-11-23 22:17:12 +0000 2 Updating master's configuration
2012-11-23 22:17:12 +0000 3 Creating ldap replicator user
2012-11-23 22:17:14 +0000 command: /usr/sbin/ntpd -q -d -d -g -x -c /var/run/tmpntp.conf.newodmaster.company.com
2012-11-23 22:17:18 +0000 Removed file at path /var/run/tmpntp.conf.newodmaster.company.com.
2012-11-23 22:17:18 +0000 4 Updating local replica configuration
2012-11-23 22:17:18 +0000 5 Gathering replication data from the master
2012-11-23 22:17:56 +0000 6 Copying master database to new replica
2012-11-23 22:17:56 +0000 Removed directory at path /var/db/openldap/openldap-data.
2012-11-23 22:17:57 +0000 command: /usr/bin/tar -C / -xf /var/db/openldap/schema.tar
2012-11-23 22:17:57 +0000 Starting LDAP server (slapd)
2012-11-23 22:17:57 +0000 Waiting for slapd to start
2012-11-23 22:17:57 +0000 ...
2012-11-23 22:17:59 +0000 Stopping LDAP server (slapd)
2012-11-23 22:18:03 +0000 command: /usr/sbin/slaptest -f /etc/openldap/slapd.conf -F /etc/openldap/slapd.d
2012-11-23 22:18:03 +0000 command: /usr/sbin/slapadd -c -w -l /var/db/openldap/openldap-data/backup.ldif
2012-11-23 22:18:04 +0000 command: /usr/sbin/slapadd -c -w -b cn=authdata -l /var/db/openldap/authdata/authdata.ldif
2012-11-23 22:18:04 +0000
2012-11-23 22:18:04 +0000 slapd is running in import mode - only use if importing large data
bdb_monitor_db_open: monitoring disabled; configure monitor database to enable
2012-11-23 22:18:04 +0000 7 Starting new replica
2012-11-23 22:18:04 +0000 Starting LDAP server (slapd)
2012-11-23 22:18:05 +0000 Waiting for slapd to start
2012-11-23 22:18:05 +0000 ...
2012-11-23 22:18:06 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2012-11-23 22:18:06 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config -s base olcServerID
2012-11-23 22:18:06 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2012-11-23 22:18:06 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2012-11-23 22:18:06 +0000 command: /bin/launchctl load -w /System/Library/LaunchDaemons/com.apple.PasswordService.plist
2012-11-23 22:18:07 +0000 8 Enabling local Kerberos server
2012-11-23 22:18:07 +0000 Configuring Kerberos server, realm is DEADSERVER.COMPANY.COM
2012-11-23 22:18:07 +0000 command: /usr/sbin/kdcsetup -e
2012-11-23 22:18:07 +0000 command: /usr/sbin/sso_util configure -x -k -r DEADSERVER.COMPANY.COM -f /LDAPv3/ldapi://%2Fvar%2Frun%2Fldapi -a diradmin -p **** -v 1 all
2012-11-23 22:18:08 +0000 _createLDAPReplica: sso_util configure failed 1. stdout = { } stderr = { Creating the service list
Creating the keytab file
2012-11-23 22:18:09 +0000 9 Enabling syncprov overlay on the replica
2012-11-23 22:18:09 +0000 command: /usr/bin/ldapsearch -x -LLL -H ldapi://%2Fvar%2Frun%2Fldapi -b cn=config objectClass=olcSyncProvConfig dn
2012-11-23 22:18:09 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2012-11-23 22:18:10 +0000 adding new entry "olcOverlay=syncprov,olcDatabase={1}bdb,cn=config"
2012-11-23 22:18:10 +0000 command: /usr/bin/ldapmodify -c -x -H ldapi://%2Fvar%2Frun%2Fldapi
2012-11-23 22:18:10 +0000 adding new entry "olcOverlay=syncprov,olcDatabase={2}bdb,cn=config"
2012-11-23 22:18:10 +0000 10 Adding replica to master
2012-11-23 22:18:10 +0000 addReplica request failed with status 1073 Unknown Error
2012-11-23 22:18:10 +0000 addReplica request failed with status 1073 Unknown Error (error = 69)
2012-11-23 22:18:10 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.opendirectorybackup.plist
2012-11-23 22:18:10 +0000 Deleting Cert Authority related data
2012-11-23 22:18:10 +0000 No intCAIdentity, not removing int CA from keychain
2012-11-23 22:18:10 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd.plist
2012-11-23 22:18:10 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertd-helper.plist
2012-11-23 22:18:10 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.xscertadmin.plist
2012-11-23 22:18:10 +0000 Updating ldapreplicas on primary master
2012-11-23 22:18:10 +0000 Removing self from the database
2012-11-23 22:18:11 +0000 Warning: An error occurred while re-enabling GSSAPI.
2012-11-23 22:18:12 +0000 Stopping LDAP server (slapd)
2012-11-23 22:18:16 +0000 cleanKeytab: unable to retrieve default realm
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.001.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.002.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.003.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.004.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.005.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/__db.006.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/altSecurityIdentities.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-company.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-computers.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-config-realname.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-generateduid.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-memberguid.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-nestedgroup.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-group-realname.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-hwuuid.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-realname.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/apple-serviceslocator.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/c.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/cn.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/DB_CONFIG.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/departmentNumber.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/dn2id.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/entryCSN.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/entryUUID.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/gidNumber.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/givenName.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/id2entry.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/ipHostNumber.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/l.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/log.0000000001.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/macAddress.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/mail.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/memberUid.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/mobile.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/objectClass.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/ou.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/postalCode.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/sn.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/st.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/street.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/telephoneNumber.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/uid.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/openldap-data/uidNumber.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.001.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.002.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.003.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.004.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.005.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/__db.006.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/alock.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/authdata.ldif.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/authdata_DB_CONFIG.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/authGUID.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/DB_CONFIG.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/dn2id.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalAliases.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/draft-krbPrincipalName.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/entryCSN.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/entryUUID.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/id2entry.bdb.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/log.0000000001.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/openldap/authdata/objectClass.bdb.
2012-11-23 22:18:16 +0000 Removed directory at path /var/db/openldap/authdata.
2012-11-23 22:18:16 +0000 Removed file at path /etc/openldap/slapd_macosxserver.conf.
2012-11-23 22:18:16 +0000 Removed file at path /etc/openldap/slapd.conf.
2012-11-23 22:18:16 +0000 Removed file at path /etc/openldap/rootDSE.ldif.
2012-11-23 22:18:16 +0000 Removed file at path /var/db/dslocal/nodes/Default/groups/com.apple.access_dsproxy.plist.
2012-11-23 22:18:16 +0000 Removed directory at path /etc/openldap/slapd.d/cn=config.
2012-11-23 22:18:16 +0000 Removed file at path /etc/openldap/slapd.d/cn=config.ldif.
2012-11-23 22:18:16 +0000 Removed directory at path /etc/openldap/slapd.d.
2012-11-23 22:18:16 +0000 Removed directory at path /etc/openldap/slapd.d.backup/cn=config.
2012-11-23 22:18:16 +0000 Removed file at path /etc/openldap/slapd.d.backup/cn=config.ldif.
2012-11-23 22:18:16 +0000 Removed directory at path /etc/openldap/slapd.d.backup.
2012-11-23 22:18:16 +0000 command: /bin/launchctl unload -w /System/Library/LaunchDaemons/com.apple.PasswordService.plist
2012-11-23 22:18:22 +0000 Removed file at path /Library/Preferences/com.apple.openldap.plist.

SSH is enabled for all users on both Macs. Manually added diradmin aswell just to make me feel better.
Additionally, here's what I get when I try running preflight on either Mac:
usvtamtln101:~ sadmin$ sudo /usr/sbin/slapconfig -preflightreplica 172.20.9.40 diradmin
Password:
172.20.9.40's Password:
2012-12-17 19:34:33 +0000 NSMutableDictionary *_getRootDSE(const char *): rootDSE not found
2012-12-17 19:34:33 +0000 Error: Unable to determine the master's software version.
After seeing this, I tried unbinding both Macs from Active Directory, restarting and then trying again. Same thing...

Create Client Installer Failing

I have a brand new Mac Mini running Apple Remote Desktop 3.5.1 on Lion 10.7.3 that I am trying to create a custom client installer and right at the end it fails every single time. Saying that "An unexpected error has occured while creating a custom installer. Please try again"
Anyone else getting this issue? at all

Custom Installer Issues with 3.5.2 Client and 3.5.1 Admin
Do you have a computer that is pre ARD client update 3.5.2? if so, you could try making your installer with ARD on that client. And you could report the issue.
And you can always send Feedback about ARD to Apple.
In thread Can't install Apple Remote Desktop 3.5.1 custom installer on Lion 10.7.3, Eric Shaheen suggested looking in //private/tmp/RemoteDesktopClientInstaller/ to see if ARD actually did create the installer; and if so, to copy it to the desktop. in the same thread gavin0001 said he was able to modify the 3.5.2 client update to make a custom installer.
You might also want to check out thread I can't get Custom Installer to create accounts on Lion. I'm using ARD 3.5.1.

Create AAC Version failing in iTunes 8 for large files

Hi,
I'm having trouble converting a few large (1gb+) MP3 files to AAC versions.
The files are Audiobooks which have been ripped from CD, then merged into a single MP3 file (with a track CUE file created so I can add the chapter marks and create a final resulting M4B file).
The MP3 files are all encoded at 44.1KHz sample rate, 64Kbps bitrate, Mono audio. When converting anything under 1GB (using iTunes' Create AAC Version option), it seems to convert fine, however as soon as I try a file over 1GB it seems to start as expected, then get approx 2/3rds through, then restart. the restart however, does not start from the beginning, it starts from the point where it had got to. The resulting M4A file is corrupt and unplayable.
Am I doing anything wrong here, or is there some sort of size/length limitation on AAC encoded audio in MP4 containers?
On a side note, I have set the AAC import options to 44.1KHz, 64KBps bitrate, Mono audio, but this does not seem to be adhered to when converting an MP3 file, instead taking whatever settings iTunes seems to think as right...

Hi,
That software looks to be working perfectly so far - not only has it changed me from using three tools to do what this one does on its own, but it's also the first that's given me a clue as to why the other tools were failing!
When I first got it to convert the chaptered MP3 files across to AAC, it came up with a warning message saying something along the lines of "The audio files you have queued are a total of x,xxx,xxx,xxx frames long, which is longer than the AAC standards can accomodate. The following tracks will be removed...". Looks like it wasn't the filesize at all, but the bitrate was too high, and went over the file's limits that way instead.
Quick note on the settings: I tried the iTunes standard "64K Podcast" settings first of all, but the sample rate got set to 22K, which caused the speech to go all robot-like, and the S's slurred. Had to bump it back up to 44K (with 32K stereo bitrate, set to mono so 16K overall).
Overall, a very useful tool, thanks Chris!

How to create workflow-status = failed with ContentService?

Hi!
For test-purpose I need a workflow with the status "failed". How can I create one?
greetings
Verena

Hi Robert
May this help
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/eddef503944dc6bbe8d81a2cec44e8/frameset.htm">Customising UWL tabs</a>
Check the <a href="https://help.sap.com/javadocs/NW04S/current/uw/index.html">UWL API</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/57/c223be82104792a15c2df11377b9ed/frameset.htm">Using UWL</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/ad68c125ae496f8c04a25090bd2e3c/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/3e/09df7f284f4fb9b50aaedf80652f4c/frameset.htmhttp://help.sap.com/saphelp_nw2004s/helpdata/en/36/dd4ad73c86412e81e9ce66eeb147e7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Thanks
Swathi

Creating HUM Pollers failing

Similar Messages

Maybe you are looking for