Creating index ,im getting this error

hi ,
while  im creating index ,im getting this error:
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<nameserverhost>:<nameserverport> is invalid (Errorcode 7213)
can you pls help me ?
Regard,
prasad D.

Hi Prasad,
   Please see the TREX Configuration doc  [TREX Configuration|http://help.sap.com/saphelp_nw70/helpdata/en/a9/4a6642161d0f53e10000000a155106/frameset.htm]
you can check the all the TREX server status in System Administration ->Monitoring ->TREX Monitor .
Naga

Similar Messages

  • Help!!! - When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

    When Creating Customer  I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
    I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
    Steps I followed in Creating a New customer Profile
    ==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
    *1) Profile Class Tab :*
    a) Balance FWD Billing : Not enabled
    b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
    c) Set Terms as per ur requirement , do allow discount & Override terms
    d) Set Dunning as per your requirement,
    e) Filled in Collectors info as per your requirement with Credit Check enabled...
    f) Receipt --> Auto cash Rule set as 'Standard'..
    *2) Late Charge Profile* Set it as per requirement
    *3) Profile Class Amounts* e.g Say Currency set as "USD"
    a) Credit Limit : 100000
    b) Order Credit Limit : 100000
    c) Minimum Receipt Amount : 1.00
    d) Min statement amount : 1.00
    e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
    f) Minimum Customer Balance : Amount ------> Value: 5.00
    g) Minimum Invoice Balance : Amount ------> Value: 5.00
    h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
    i) mention Type as Fixed Rate, Value : 10
    j) You can avoid setting the Penalty Charge for the time being..
    Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well   I could see this.
    When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

    Hi
    You get this error when profile class amounts are not set for all the currency.  Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
    Regards

  • I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or

    I keep getting this error in Dreamweaver when I am trying to upload my website?  Can you tell me what I am doing wrong?  here is the error message: /html - error occurred - Unable to create remote folder /html.  Access denied.  The file may not exist, or there could be a permission problem.   Make sure you have proper authorization on the server and the server is properly configured.  File activity incomplete. 1 file(s) or folder(s) were not completed.  Files with errors: 1 /html

    Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
    Mylenium

  • For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

    For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

    mike frischenmeyer
    What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
    Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
    know the details and troubleshoot to determined what caused the problem.
    1. Can you open a new project?
    2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
    for that project?
    3. Please review the Adobe document on troubleshooting damaged projects.
    Troubleshoot damaged projects | Adobe Premiere Elements
    4. What are the steps that you are using to reopen this saved closed project.
    a. File Menu/Open Project/Name of Project
    b. Other
    Please review and consider and then we can decide what next based on your further details and results..
    Thank you.
    ATR

  • I'm getting this error message- "*iTunes Library.itl* cannot be read beacuse it was created by a newer version of itunes."

    I have my iTunes on a Windows XP operating system. My iTunes Library is stored on a external hard drive(H) with a desktop shortcut on the C drive pointing to the H drive where the iTunes LIbrary is located. I have it set up so that when I click the iTunes desktop shortcut it routes to the H drive and retrieves my iTunes Library from there. I've had a hard drive crash before and lost all of my iTunes Library.
    So, if all of that makes any sense, I got a new desktop computer with Windows 7 Operating System and went online and downloaded the most recent iTunes softwear. I then attached the external hard drive from my old Windows XP system to the new Windows 7 Sytem. I routed it the same way I had it on the old system, but i keep getting this error message- "The file *iTunes Library.itl* cannot be read because it was created by a newer version of iTunes." To make matters worse, I tried to put the external hard drive back on my initial Windows XP Sytem and now its giving me the same error message. I know its alot to digest, but can anybody help me?????

    For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
    tt2

  • I get this error when trying to create a ringtone - iTunes could not connec

    I get this error when trying to create a ringtone:
    "iTunes could not connect to the iTunes Store - an unknown error occurred (11556)"
    But I CAN connect - if I click on the iTunes Store, it connects right away.
    I want to make a ringtone from a song that I purchased, but all I get is the same error message.
    iTunes 9.2.2, Ireland iTunes Store.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

  • When i am trying to create BI Universe on InfoCube I am getting this Error

    Hi All,
    I am using BOE 3.1
    When i am trying to create BI Universe on InfoCube I am getting this Error
    DBD: A runtime exception has Occured. (Error Getting list of Cubes of catalog $INFOCUBE: Unknown error)
    Same  when i am connecting to BexQuery Im not getting any error i am able to create the OLAPUniverse on BI Query.
    My question is why i am getting this error when i click on the Infocube in the Designer. Did i am missing any thing in the Universe designer.
    Regards,
    Ravi

    HI,
    Please go through by below link.
    DBD: A runtime exception in Universe Designer
    Thanks,
    Amit

  • HELP!!!!  ORA-01858 By creating user or reset password get this error

    By creating user or reset password get this error:
    Data Error: ORA-01858: found a non-digital world where expecting one numerical ORA-06512: at "DERWEB.ORA_ASPNET_MEM_RESETPASSWORD", line 80 ORA-06512: at line 1

    Hi
    You get this error when profile class amounts are not set for all the currency.  Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
    Regards

  • Getting this error: Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you.

    I keep getting this error on my new Macbook Pro w/ Retina.
    "Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."
    Connected to a wifi network and QNAP storage system.  There are 5 computers on this network, and each backs up just fine.  The issue is isolated to this one machine.
    This error shows up every week or so.

    A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't the answer you want. I know Time Machine accepts the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
    Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
    If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
    If you're determined to keep using the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

  • Why do I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1).

    In motion 5, when I go to export - H.264 - I get this error: The operation could not be completed because an error occurred when creating frame 1364 (error -1). Why and How do I Fix It???

    What version of FCPX ?

  • I am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

    i am getting this error message on my iMac. Time Machine unable to complete backup. An error occurred while creating the back up folder. Any ideas on how to fix???

    See Pondini's TM FAQs

  • When i create a new bank statement  i get this error APP-FND-01728:As Assig

    dear,
    When I try to create new statement bank in cash management i get this error APP-FND-01728:As Assignment does not exit for
    these parameters
    Busniess Impact : Each Bank Statement I create Does Not Take Any Document Number
    Facts :
    a-Set profile option Sequential Numbering: Partially Used
    thanks

    Hello
    If you do not have already a Sequence created you may need to go to Application/Document/Define and create a sequence that will give each statement an unique number.
    You need to create Document Categories for the Cash Management application using the name of your Bank Account (as System Administrator navigate to Application/Document/Categories). The table name is CE_STATEMENT_HEADERS_ALL. Then assign the Categories to the proper SOB (navigate to Application/Document/Assign).
    Hope this helps
    Octavio

  • I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do????

    I am using iWeb '08 2.0.4 to create a web page...since I will not be able to publish to Mobileme I am trying to publish to another server...I keep getting this error message " Parse error: syntax error, unexpected T_STRING"  I have no idea what to do???? Any Suggestions?

    This is to do with the .htaccess file on your server.
    You either need to deal with this and open it with an html editor or change your web host.
    Do a search of this forum and there are plenty of posts that relate to parse error and .htaccess pages.  Have a look on the right hand side of this post and you will see similar ones like yours.

  • I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location.

    I've been getting this error message Lightroom cannot start because it cannot create files in the temporary file location “/var/folders/lK/lKbPbq2OF0aPCbMnDc erE   TI/-Tmp-”
    I've also been getting others errors about cannot create or modify temporary files when trying to install other programs.  Also some of my documents on my computer will not open and crash. 
    Any help would be helpful.
    I've tried doing this as read not sure if it helps:
    ls -Odel $TMPD
    This is what I had in response:
    drwxr-xr-x  36 root  admin  - 1224 Dec  9 00:29 /var/folders/lK/lKbPbq2OF0aPCbMnDc+erE+++TI/-Tmp-/

    Which os version are you using? 
    What is Lighthouse? 
    Please describe in detail all you have attempted to do in order to resolve the issue. 

  • I get this error when I create a new Script : Failed to create script

    Hi everyone,
    I get this error, and I'm not able to work with this programme. So, I can't have acces to adobe support directly.
    Someone know what I could do for this? It seen, I have a problème with adobe server I think.

    have you seen this KB article: http://support.apple.com/kb/HT1398 ?
    JGG

Maybe you are looking for

  • Data Federator authentication modes

    In Data Federator (3.0 SP1 or previous), Is there any authentication mode similar to AD/LDAP in BOE? What are the options available for dynamic logon, while connecting to a database via JDBC in the DF Data source definition screen? Thanks Tiji

  • Hp officejet pro 8500a won't connect to network

    hp officejet pro 8500a won't connect to network

  • Data block or control block

    any one please suggest : which is faster and better in 9i forms/reports applications, a data block with form triggers(pre,post,commit_form) for DML ; or a control block with explicit DML for retreiving and posting from/to data base. can PJC help in b

  • Java application deployment/setup

    I'm in need of some information about how to go about creating an installation program for my java desktop application. We have a big project due in two months and one of the requirements is that it needs to be deployable on any machine, including ma

  • JFilchooser error on Webstart application with latest JRE download

    Recently we have observed that with the latest versions of JRE downloads the JFilechooser does not pop up and on some machines and on some machines it throws out a 3184 error message on windows vista machines. We are seeing this error occuring only o