Creating Infoobject

Hello
I have a question in regards to creating an Infoobject. Under 'Master Data/Texts' tab when creating an Infoobject  when should we actually fill in the Application Component box.And what exactly will it do.Do i fill it for things like 'Wever- Version for printing GR/GI slip' which will only contain and show data.

Hi Krrish,
You can fill in the application component box to enable loading the master data and assigning the InfoObject InfoSource to an application component. This indicator or the application component specifies if the characteristic is a master data InfoSource with direct updating. You cannot set the indicator directly, but rather only by entering an application component into the respective field.
To make a characteristic a master data InfoSource, you have to assign it to an application component. The characteristic then appears in the InfoSource tree of the Adminstrator Workbench. From there, you can assign the DataSources and source systems to the characteristic. You can then load master data, texts and hierarchies for the characteristic.
Hope this helps...

Similar Messages

  • Creating InfoObjects Dynamically

    Hi,  Anyone have any ABAP I could use to create infoObjects dynamically?  I have a list of InfoObjects and related attributes and I'd Like to have them created using an ABAP... 
    ThankS!
    There must be some enterprising soul who could help out?
    I thought some enterprising soul would jump on this one.  There has to be a way using a class or BAPI?  anyone?

    Hi
    The upload from XML is a valid method if you can make an XML file with the required values.
    An alternative is to create a BDC with the LSMW instrument or use the BAPI BAPI_IOBJ_CREATE that manage all the different parameters you need (compounding, attribute,...)
    Regards,
    Vishwa

  • Error in creating infoobject

    Hi Experts,
    While i am creating infoobject ZRSR01 with quantity data type and with a reference of ZRCR01,  i am  getting error saying that "Key figure ZRDSR01 is used in non-*** value ZRSPS01, type cannot be changed".
    Can any body help me how to solve this issue.
    Thanks in advance

    Hi Sushma,
    Why you are using the reference? why don't you create it independently?
    Check if there is any relation between the info objects ZRCR01 and ZRDSR01( i mean is the ZRCR01 is reference of ZRDSR01)
    Are you sure the data types for all the KFs is same?
    You can not change the data types if its being used some where else as reference?
    Regards
    Kp
    Edited by: prashanthk on Oct 8, 2010 3:24 PM

  • How to Create Infoobjects,ODS,INFOCUBES & Multi Providers in BI7

    Hi,
    I want Step by step procedure to Create Infoobjects ,ODS,Infocubes & Mutiprovider in BI7.I Know the procedure for Creating these in BW3.5. So I want to Know the difference with ur Answers
    Please help me Regarding this.
    Asian Points*****
    Thanks,
    kiran.
    Message was edited by:
            kiran manyam

    There is no change in creating info objects.
    Cubes:
    1. Right click the info area and chose create info cube.
    2. Select the type of cube you wish to create and comnfirm your selections.
    3. The next screen is where you actually define the cube.
    4. Now you will notice the difference.
    5. Place your cursur on key fig and right click and chose infio object direct input; chose your key fig for the cube.
    6. Similarly for the dimension; right click the dimension and chose inbfo object direct input, chose your chars and out them in dimension.
    7. Activate the cube.
    Multi cube:
    1. Right click the info area - chose create multi provider.
    2. select the cubes , DSOs, info objects that you need for the multi provider.
    3. On the right side of the screen, you will see all the objects that you selected and open the key fig and dimension and drag the ones you need to define the multi provider.
    4. Identify the chars and key figs.
    5. Acvitate the mullti provider.
    Ravi Thothadri
    Ravi Thothadri

  • Error while creating infoobject

    Hi All,
    I was creating a infoobject using RSA1.
    On the attributes tab selected 0MATL_TYPE and 0MATL_Group.
    received error msg "Attributes should start with ABCDEFGHIJKLMNOPQRSTUVWXYZ"
    i did accept my other entry "0PROFIT_CNTR"
    Please help.

    Hi,
    They are standard objects.. you can not create objects starting '0'
    Create them with Z**** Example ZMATL_TYP Zmatl_grp
    Refer Help .. Creating InfoObjects: Characteristics/Keyfigures
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a63f9e07211d2acb80000e829fbfe/frameset.htm
    Thanks
    Edited by: Srinivas on Jun 17, 2010 5:51 PM

  • QUERY - Creating InfoObject Catalog

    Hi,
    I am new to BW as well as Group.
    When I am trying to Create InfoObject Catalog, it is saying Template Not Set (Select using Pushbuttons)
    I don't know what does it mean. Please help me out.
    Procedure which I am following
    Right Click on InfoObject (iademo) -> Select Create InfoObject Catalog -> In Edit InfoObject Catalog Dilogue box Iam giving InfoObjCat, Short Test and InfoObject Type as Char -> Click on Create ->
    In Template area I am getting a msg Not Set (Select using Pushbuttons)
    I don't understand wether my approach is wrong or is there any software problem.
    Please help me out.
    Thanks for your help in advance.
    Regards,
    Aruna

    Hi Aruna,
    To create a Infoobjcatalog follow this stpes,
    RSA1 -->Create Info Area
    Click Info objects>choose Info Area> Right click to create Info object catalog(Char) , Give Technical name and Description and continue ---> Activate it
    Like wise create IOC for Keyfigure also
    Note: Assign points if it helps
    Regards,
    Arun.M.D

  • Creating InfoObjects-Characteristics

    PLease search the forums before posting
    Hi,
    can anyone explain how to create infoobject characterstics??
    Regards,
    Vivek
    Edited by: Arun Varadarajan on Feb 11, 2009 2:43 PM

    Hi Vivek,
    In RSA1-> under Infoobjects -> under Infoarea (like Supply chain management), you can create your own Infoarea, under that two catalogs needs to be created one for charecteristics and another for Keyfigures.
    under Charectertics Infoobject catalogs -> right Create infoobject-> you can create -> new one with complete new properties or use template or refernce infoobjects.
    Characteristic infoobjects can be of typesm Char, Number, time and date.
    for more information look for SAP help.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a637fe07211d2acb80000e829fbfe/content.htm]
    Regards,
    Daya Sagar

  • Creating InfoObjects attribute

    Hi,
    Can any one tell how to create InfoObjects attribute
    Regards,
    Vivek

    Hi Vivek
    An infoobject can have another infoobject as an attribute included in its attribute tab.
    You can create there itself an attribute by just clicking create infoobject
    An attribute can be again Keyfigure or characteristc.
    An attribute provide some additional information about the infoobject
    Basic eg: 0EMPLOYEE and its attirbute
    you got many type of attributes Display , Navigational, Transitive, also again categorised as time dependent adn time independent
    below forum throws some light on master data and its attributes
    https://forums.sdn.sap.com/click.jspa?searchID=22098299&messageID=6542490

  • Creating Infoobjects for the existing Infoprovider

    Hello,
          Can someone give me the steps to follow while creating infoobjects. Example - while working on a query realized that addition of 2 more infoobjects would make a lot of sense. So how do i go about creating infoobjects for the already existing infoprovider. I mean do i need to make the initial changes in the ODS or Infocube? Its just a doubt so please any amount of explanation would be of great help.
    Thank You,
    Anjali

    Hi Anjali,
    I agree with Sreenath.
    Few Suggestions:
    If these two fields are the part of Transaction Data then you need to add them in Transfer Structure and Infoprovider.
    If you want to use these objects as only Navigational Attributes then you need not add these fields to the Infoprovider, just make them as navigational attributes in the master data characteristics.
    Hope that helps.
    Regards
    Deepak

  • Newly Created Infoobjects are not displaying in the RSA1

    Dear Experts,
    When ever i am trying to create a new Info Object Characterstic/Keyfigure, i am able to create and activate it sucess fully, but when i am trying to see the same in corresponding infoobjects catelog in RSA1 that object is not displaying there.
    When i am trying to find the same using "FIND' Option it is returing 'No Entries' as result even though i am sure that obj is created.
    Please help me in this context.
    Regards,
    Rajkandula

    Have you created that Infoobjects under a specific Catalog.If it is true try to find that catalog and you can find the Infoobjects there. If it is not true they will be under Unassigned nodes. Otherwise refresh your transaction once and try to find the Infoobject with find option.
    I hope it will help you.
    JM Krishna

  • Cannot find created infoobject in infoobjects, can see it in metadata repos

    Hi all,
    I have created a characteristic infobject in an infoarea. But i cannot view the infoobject in the infoobjects (when i click find and see, it says not entries found).
    But the same when i check in the meta data repository, i can see the infoobject.
    In the environment tab i have selected display all infoobjects, but still i am facing the same issue.
    Help needed!
    Thanks
    Rani

    Hi,
    While creating the info object, hope you may not assigned to any package.
    You can open any of the Info object catelog and you get the info object from the right pane by search option and then you can move the same to left pane and then you can activate the info object catelog. later you can see the same info object the catelog where you have moved...
    Regards,
    RAO.

  • Creating InfoObjects using program and assignment under InfoObject Catalog

    Hi All,
    There is a FM BAPI_IOBJ_CREATE which can create an Infoobject but the problem is it is not having provisions to get assigned to a particular " Infoobject Catalog".
    Is there any other program or some way by which we can do it using the same FM.
    Thanks in advance

    To assign your Infoobject you must use a separate BAPI:
    BAPI_IOBC_CHANGE
    This function module changes an existing InfoObject catalog. Enter all the InfoObject catalog properties in the DETAILS parameter
    If the Catalog doesn't exist you have another BAPI:
    BAPI_IOBC_CREATE
    This function module creates a new InfoObject catalog. You have to give all the InfoObject catalog properties in the DETAILS parameter
    Regards,
    Sergio

  • Create InfoObject KeyFigure of data type CUKY 5

    Hi,
    I have requirement where i need to create a custome infoobject keyfigure to map the source field which of type CUKY Length 5.
    can any please let me know how do i create a Infoobject keyfigure whose type is CUKY and length 5.
    regards,
    Prem

    Hi,
    CUKY - is the reference field of any Keyfigure infoobject.
    You just create a unit Keyfigure as a reference unit under unassigned unit infoobject catalog.
    Then use this unit characteristic as reference to a KF.
    Regards,
    rvc

  • Error while creating InfoObject's Attribute in sandbox

    Please help me to sort out the below error message " InfoObject is not available in version M".
    Please find the attached image file below for more details.
    Thanks and Regards
    Ranendra

    HI,
    Activate that Infoobject, then it will ask you to activate all dependent attributes.
    Choose activate all dependent attributes then this infoobject will get activated.

  • How to create multiple infoobjects?

    Hi Experts ,
    I have a requirement where i need to create more than 70 infoobjects. Is there any standard report or function module where we can create multiple infoobjects and a detailed log if any infoobject got any error in between. I know creating infoobjects through  RSA1 one by one but looking out for any program where we can create multiple infoobjects.

    Dear Adi,
    While there are FM to activate  and Delete Multiple InfoObjects,,,We dont have any proces  of creating Multiple Info Objects ata time..
    Because each infoobject ahs differnt properties and different charactersitcs...some this is not feasible..
    Hope this helps u..
    Best Regards,
    VVenkat...

Maybe you are looking for

  • Stored procedure in Oracle 8.1.7.0

    HI, my oracle version is 8.1.7.0 I've created this stored procedure: CREATE OR REPLACE procedure CREATE_TAB1 IS SVUOTA VARCHAR2(64); PRAGMA AUTONOMOUS_TRANSACTION; err_num number; err_msg varchar2(100); BEGIN SVUOTA := 'TRUNCATE TABLE TAB1 REUSE STOR

  • Cd opens at start up (how do I stop that)

    Hi All, I am wondering how to get my Quad 2.5ghz G5 to stop opening it's door on start up (or is it always that way?) Thanks (I did search here as well)

  • Compatability with Skullcandy Pipe

    Hello, I purchased an Ipod Nano last night, and while I love many things about it, I may be forced to return it. I have a Skullcandy Pipe that I used to use with my Ipod classic before it crashed. I can't use it with the Nano because both the audio-o

  • Powershell Script to Copy an Unknown number of Files in a Directory

    I need to be able to copy an unknown number of files in a folder to an FTP site.  I have the FTP components figured out and working, but am running into a problem when there is only 1 file for upload.  The folder is a queue that users manually copy f

  • How do i change a user password for historical reports?

    I had to change a users extension and she is not able to connect to historical reports.  I keep getting an error message that her user id or password is incorrect.  Checked user id which is correct and user is using the same password she used before