Creating inspection lot for vendor returns

Hi All,
In Subcontracting, components are sent to vendor using Mov Type 541, if vendor returns the components without any value addition we recieve the goods with Mov type 542.
Now, when we recieve the goods using 542 customer requires that the material has to be posted to quality inspection and a lot has to be created.
I have already tried with inspection type 08 but its not working.
Any ideas how it can be done?
Regards
Naveen Goveas

Hi Naveen,
You have come across a common problem in later releases of SAP. Ram is nearly right in the settings for control of inspection lots for goods movements. In the standard system movement type 542 has no inspection lot origin assigned, so even if you have maintained an inspection type for your material there is no "trigger" for the inspection lot creation from that movement type. Unfortunately, you cannot change the inspection lot origin settings for movement types. The only choice you have is to create (as a copy) a customer defined movement type (one which already has the appropriate inspection lot origin assigned) and use that instead. You have to also be careful about the 'Quantity' and 'Value' updating strings for your new movement type.
Hope that helps.
Colin

Similar Messages

  • Create inspection lot in sales return

    Hi Experts,
    When doing sales return (VA01) and return delivery order (VL01N), if I need to create inspection lot for QA guys, what is required to set?
    I have tried using SAP standard inspection type 06 or 10, no inspection lot is created.
    Please help!
    Regards,
    Daniel

    Hi
    Sales return inspection mainly deals with two scenarios: stock relevant and non stock relevant. 06 inspection origin/type is for non-stock relevant and the preferred one.
    The basic setting is already explained in previous post. Now few things to done are:
    1. Activate inspection type 06 for the materials
    2. Make sure tick box is not checked for movement type 651 in QCC0Q-inspection-Insp lot creation-insp for good movement--deactivate quality
    3. in Tcode VOV6, select schedule line category DN and check that movement type maintained in 651
    4. Check your inspection plan usage is correct as per your inspection type setup.
    Now your settings are completed for customer return inspection with 06 origin. Once any return delivery is done, a non-stock relevant lot will be created in SAP.

  • Creation of inspection lots for vendors

    Hello friends,
    How can we create inspection lots for all vendors at a time? I want to record results for my vendors(near about 2000 no.) by inspecting their raw matwrials in a lab.

    Hi Kiran,
    Why you are going for manual lot creation if the scenario is like above?
    1.     Assign inspection type 01 to material master
    2.     Prepare an inspection plan through QP01 with usage 5
    3.     Inspection lots will get generated with lot origin 01 whenever you do good receipt through
    migo with 101 movement type
    Conclusion: Inspection lots will get generated automatically whenever you do good receipt with vendor material combination.
    Best Regards,
    Anand Rao

  • Create Inspection Lot for Serial Number

    Hello,
    Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
    I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
    Or is that any other way to do this???
    Thanks in advance.
    BMO

    Atul,
    The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
    Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
    Possible exception:
    If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
    Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
    For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
    Thanks,
    BMO.

  • Not creating inspection lot for STO

    Hi ,
    I have two plants X(Supplying) and Y (Receiving).
    In material master in quality 01 and 08 (inspection type) for plant Y active.
    Process as folllow:
    1)STO with U (acc assignment) created.
    2)VL10B ,created delivery.
    3)Vl02n PGI
    4)Migo GR for STO did in plant Y.
    but stock is not going in quality instead of this it is going in unrestricated.
    Guys please throw some light ,why system is behaving like this.
    Regards
    Sowmya

    Hi,
    In your STO purchase order in Delivery tab check if  stock type is " X Quality Inspection"
    Check in Material master updated inspection types 01 and 08 are checked as active
    In material master quality view Post to inspection stock check box is active
    Thanks
    Diwakar

  • Automatic creation of inspection lot for Expired Batches

    Hi All,
    I am in one trouble and need some help in above scenario.
    I am able to create inspection lot for batches about to expire, but how to create inspection lots for batches which were already expired or which next inspection date already missed?
    Master data like '09' inspection type, inspection plan is already maintained.
    Second question, is QA07 also affect on special stocks like vendor stock or project stock etc?
    Immediate response will be appreciated.
    Thanks

    Hi
    To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
    regards
    Manish

  • Inspection lot for external service

    Hi Gajesh/ Sujit/shyamal/ all
    we are planning to use service master for external vendor's service, i have couple of questions
    please share your experience, if anyone of you come across this kind of requirement
    1. is it possible to create an inspection lot for external service?
    2. we want to capture / validate the vendor's external service, weather it is accepted or not? sometime we need to enter quantitative value also
    3. is there any setting or config for assign /create inspection lot for service master?
    what I know is without material master we cannot create inspection lot but i don't know about service master.
    thanks
    Sami

    Gajesh,
    thanks for quick response.
    2 business req. are as follows
    1.  vendror is performing periodic service, MM side external service order (service contract/PO)created, bsaed on thatPO vendors performing service.
    service entry sheet they are capturing man hours and date of service.
    business wants quality of service to be captured in QM inspectiion lot.
    2. production order ---> routing -- operation ---> vendor & service PO number  assigned external work --> now inspetion lot will be created for that material/production order.
    how can we link service master, service entry sheet and inspection lot?
    how to map for this req.?
    again is't possible to create inspection lot for service master?(without material master)if your answer is yes, then where/how can we assign inspection type ? which inspection type?
    thanks
    Sami

  • Inspection Lot Origin 06 (return)

    Hi Experts,
    What is the logic of system creating 2 inspection lots for Sales return ? If we do not deactivate the mvt type 651 for QM, while creating delivery and also while PGR there will be 2 inspection lot created.
    Regds

    Hi Sujit,
    The lots are with same inspection type of '06'. The mvt type is 651 (for which I have de activated QM). When a return delivery is created, the system triggers a '06' inspection lot. But once the UD is done as accept, and then a PGR is done another Inspection lot with the same '06' type is created but this time with reference to the 651 material doc. (not stock relevant as '06' type)
    I wonder why a second inspection lot get generated if I dont deactivate 651 mvt type ?
    Rgds
    Edited by: Joe2nd on Feb 11, 2010 11:52 AM

  • How to create inspection lot manually without using QA01 Transaction code?

    Hi,
    Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01

    Hello, Srinivas,
    If you want another T code only then you can try QA01A.
    or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
    But let me know the reason why you want T code other than QA01.
    Regards,
    Shyamal

  • Creating inspection lot  in REM

    Hi
    In REM(Repetitive Manufactruing) Scenario: 
    Is their any possibility to create an inspection lot.
    1) At the first GR and no more at subsequent GR or;
      2) at each GR?
    Thanks in advance
    Saravana

    Hi kumar
    if you want to create inspection lot for REM then following are the settings
    1. inspection type 13 for inprocess check for repetative with task list selection
    2.  maintained inspection characteristics in rate routing for which you want to maintained inspection.like inspection point
    3. Inspection creation by tcode MFPR which creates inpsction lot for your production version. manually,
    Regards
    Pravin

  • Inspection lot for sale service order

    Dear all,
    Is it possible to create inspection lot for service order created in sale and distribution?
    I have a sale document type against which services are sold. I want when service order is created inspection lot trigger.
    Thanks to all.

    I believe the service order is simply a different type of maintenance order.  You should be able to create inspection lots for these in a similar fashion as used in maintenance orders.  I.e inspection types 14 are used.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/2d/352264448c11d189420000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/e9/92b917f6dc11d19296ab92e885eaaa/frameset.htm
    There are many places in the services help files that mention using inspection lots.  The two above are just a couple of them.
    FF

  • MFPR - Processing Inspection Lots for Production versions issue

    Hello,
    User are not able to seeing line item to create inspection lot for a specific part number.
    I checked inspection set up in  material master, rate routing, and compared with similar part numbers.It all looks good to me.
    Any help would be greatly appreciated!!
    Regards,
    Owais

    In REM Inspection lot for Inprocess is generated for header material for which you actually define "production version".
    Line items can not be seen in MFPR.

  • How to create an inspection lot for each line item of the Purchase order?

    Hi,
    How to create an inspection lot for each line item of the Purchase order ?
    In detail if possible.

    Hi
       please check this
    [thread|Create Inspection Lot;

  • Inspection Lot for Inhouse Operation Not Creating

    Dear Friends,
          My process is Like this, in production Order Out of ten operation eight operation are subcontracting Process.I am getting inspection Lot for this eight operation by maintaining inspection type 0130.But i am not getting inspection lot for inhouse operation by maintaining inspection type 03 also.So Please tell me what setting i have to do to get inspection Lot for inhouse operations.
    Your Valuable solution is important for me...
    Regards,
    M.M.S

    Hi Mohammed,
    Check Inspection type maintained in Material master, it must be checked for "active". If it is active then system will create inspection lot as soon as you release your order.
    Regards,
    Shyamal

  • Inspection Lot for inspection type 09_ Vendor field is blank

    Hi,
    Inspection lot for inspection type 09. I am not getting the vendor name in inspection lot details. Vendor field is blank.
    I need this field updated. Please guide me what to do for this.
    Thnaks & Regards
    Kundan kumar

    HI Ashok,
    I checked in material batch data( msc3n) vendor details is there.
    Please update me more in this regard
    Thanks & Regards
    Kundan kumar

Maybe you are looking for

  • Material Master Views Authorization

    Hi All, I'm trying to restrict some views of the material master for some users. I've read that is possible to limit these views by the maintenance status of the authorizations but itit doesn't work for me. can you help me? I am using "SAP_ISR_MATERI

  • Synchronisation outlook mac et connection wifi

    Bonjour, Quand je synchronise Outlook mac 2011 (envoyer/recevoir), un message d'erreur avec bip s'affiche "Invalid mailbox ORANGE/SOSH" et "Invalid mailbox SFR/Orange" en bas à droite à côté de "connecté à..." alors que mon opérateur internet est Num

  • Transaction Launcher for CRM IC Webclient

    Hi I need some help in configuring Transaction Launcher for CRM IC Webclient, the catch is the backend is not SD but Campus Management. Help pls [email protected] Anu

  • Complaint over poor customer service - Broadband ...

    Just thought I'd get this off my chest, as I'm fed up with BT retail and now looking to switch. Previously no issues with service.  My exchange implemented CN21 on 21st May.  Since then I've suffer from random disconnection.  The heavier the usage, t

  • Data Backup for New iMac

    Hi all, I just purchased my first iMac and before it gets here I am trying to figure out what the best ways are to backup data on the system. I currently backup data for my Windows-based PCs using Carbonite online backup. But I wasn't sure what ways