Creating JPEG file from .MOV video

How do I (or can I) create a "snapshot" JPEG file of a paused .MOV video file using Quicktime? Thanks for you help!

The free version of QuickTime will allow you to take a .bmp picture of the current frame. Just do "Edit" then "Copy" and you'll be able to paste this .bmp file into any program that will take it.
If you paste it into Paint (Start, Programs, Accessories, Paint) then you can choose File -> Save As... and choose .jpg or any other supported format as your type.

Similar Messages

Can not open JPEG files and can not create JPEG files from other software

Can not open JPEG files and can not create JPEG files from other software (For example from Solidworks).
When I try to right click on a JPEG, a notice window appears written: "Windows Explorer has stopped working - Windows is
checking for a solution to the problem" and then the notice box disapears, the desktop appears and I can continue working.
From the other side - If I try to save as JPEG a screen of Solidworks (like a view of a part) the Solidworks falls but the JPEG
is created (I can see its name in the directory I created it).
I can open the JPEGS with the Paint software if I want but not with the Windows Photo Viewer.
I have the feeling that the Windows Photo Viewer disapeared from my computer - just a feeling.
I will appreciate your assistance.
Avi T. 2014

Hi,
Did Windows Photo Viewer option appear when you right click the JPEG file and select open with?
I would like suggest you use Clean Boot to troubleshoot if there is third-party software conflict:
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Karen Hu
TechNet Community Support

Question about creating JPEG still from movie clip?

The aperture help says that a frame will be copied as part of a stack .. But I do not see this to be the case. When I make a frame from a movie, I don't see ANYTHING different in the browser window. Please help!

Yes, you can do that, but it's a little difficult to advise
you the best way with the information provided:
Can you clarify:
Do you want to play the main clip while the thumbs continue
to load... or do you want to preload the thumbs, then play the main
clip, then do the tweening when the main timeline reaches the end?
This way is easy enough.
If you want them to continue to load and then do the tweening
at the end of the main timeline (e..g with a stop() on the last
frame) then its also not complicated, but you need to cover the
situation where the loading of the thumbs may not yet have
completed by that time (perhaps the risk is low if the timeline is
long, but its a sensible thing to address regardless).
Also consider whether you want anything to be hidden (i.e.
_visible=false) at any point - e.g. before the thumbs have finished
loading.
As a starting point I suggest you would probably put the code
after
removeMovieClip("thumbLoading");
and before the last curly bracket (" } ") in a separate
function on the main timeline, e.g.
function tweenThumbs(){
//code here
(its actually not easy to be sure, because I can't visualize
what exactly it does)
what you would do next depends on the answers to the above
questions.

How do i export a single jpeg frame from a video file in final cut x

how do i export a single jpeg frame from a video file in final cut x

You can also use the 3 finger method of COMMAND+SHIFT+4, then drag across what you want to copy from the image. That will show up on your desktop, which then you can edit using Photoshop, if you want too.
You can then change the file format from a PNG to either a .JPG or TIFF or even a Photoshop image.
Make sure, you have stopped the playback, to what you want to save as a still.
Either method works, to make a still image from video.

Creating PDF Files from Microsoft Office | Learn Acrobat X | Adobe TV

This video explains how to create PDF files from Microsoft Office products including Office 2010 in Acrobat X Std. or Pro.
http://adobe.ly/w5Vsg9

I have used Print to PDF from the File Menu in Office many times. Normally it works fine, but for whatever reason, in MS Excel 2010, I have one file that will not Print.
It allows me to select the Adobe Printer and save location, and when I hit "Print" it shows a dialog box for about 1/2 a second, but no progress meter, and the file isn't created. All other files work fine except this one - there aren't any security measures or special attributes in the file, it just doesn't physically create the PDF.
Any thoughts on how to resolve? I have tried rebooting both Excel as well as the Laptop several times.

HOW TO CREATE PDF FILES FROM AUTOCAD 12

I'M USING ACROBAT X TO CREATE PDF FILES FROM AUTOCAD 12 DRAWINGS. THE PROGRAM RANDOMLY LEAVES OUT TEXT AND IMAGES. IT ALSO STRUGGLES WITH TIFF, JPEG AND PDF IMAGE FILES EMBEDDED WITHIN THE AUTOCAD DRAWING. THIS HAS BEEN AN ONGOING PROBLEM WITH ACROBAT. I WAS HOPING THE UPGRADE TO X WOULD ELIMINATE THE PROBLEM BUT IT HAS NOT.

Hi Joao,
Verify these links hope it may helps...
http://www.devx.com/xml/Article/16430/1954
http://technopaper.blogspot.com/2008/06/using-xsl-fo-to-create-pdf-files.html
http://www.ibm.com/developerworks/xml/library/x-xslfo/
http://www.antennahouse.com/XSLsample/XSLsample.htm
Regards,
Anil.

Creating JPEG's from iMove .dv stills

I would like to take still frames of an iMovie file and put them on a website. Does anyone know how to create "valid" jpeg files from .dv iMovie stills? I tried just renaiming the .dv files to .jpg and .jpeg but when you attempt to open the files with something other than iPhoto (Paint Shop Pro for example), you get an invalid jpeg file message. I also get a "no preview available" message when i send the files to someone via email. Any suggestions would be greatly appreciated.
thanks.

File menu->Save Frame as...

Jpeg thumbnails from mov

has anyone found a way to create jpg thumbnails from movie files..... Basically what Motion does in the library preview, but in an external way so I can save them as PDF's for reference.
"quad" G5 Mac OS X (10.4.3)

You might try throwing them all in a QuickTime player, exporting to a thumbnail size, then taking that and saving an image sequence. Though I guess you'd lose file names then...
I guess the best way to do it would be to set up an action in PhotoShop(something that resizes to a specified resolution), save it as a droplet, then select all your files and drag them to that droplet. I don't have specifics on the procedure, but if you google Photoshop action droplet I'm sure you'll find a tutorial online somewhere.
Patrick

How can I import an mp4 file from my video camera into my iPad ?

I'm totally new to this iPad world. I would like to import a file from my video camera to edit it in iMovies. I tried adding the file through iTunes, and it appeared to transfer the file to my iPad, but I can't find any way to open the file, not even to play it. Any help would be appreciated.

The time should already be shown on the status bar, but you can't add the day and/or date to it - if you would like to have them then you coul leave feedback for Apple : http://www.apple.com/feedback/ipad.html
If you want to copy an attachment from an email then you can't do that directly from the Mail app. If the email is still on your provider's server then you should be able to read the email on your provider's site via a browser on your computer and save it from there directly on your computer. Otherwise you will need to copy the file from the Mail app to another app on your iPad via the 'open in' function. Do you have an app on your iPad that supports the type of file that you want to copy ? How you then copy the file to your computer will depend upon what the app that you copy it to supports - different apps have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via your wifi network, dropbox etc

FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

Howto make created folders/ files from one teacher, read only for other teachers?

Hello there,
as an admin @ school I was wondering how to make created folders/ files from one teacher, read only for other teachers?
- In a 2008domain, created a group "teachers"
- created a folder "teacher data" where all teachers have read/write permissions
ideal,a teacher who make's a folder in "teacher data" should be the only oen who is able to add file's to that folder and dele that folder or files. Other teachers may be able to read the content of the folder.
Is this possible to set up and how?
many thanks.
Nico.
rds

Hi Nico,
You could set the permissions below to resolve the issue:
For the root folder "teacher data": give the full control permission to CREATOR OWNER – "Subfolders and files only" and give the read/write permissions to the group "teachers"– "This folder only".
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Creating XML file from Java Bean

Hi
Are there any standard methods in Java 1.5 to create XML file from java bean,
i can use JAXB or castor to do so,
But i would like to know if there is any thing in java core classes,
I have seen XMLEncoder, but this is not what i want.
Any ideas
Ashish

Marshall JavaBean to an XML document with JAXB or XMLBeans.

How to create xml file from original

I have this complicated xml and I want to search through it and make a new xml with only element I find that match. what is the best way to do this? the file
is about 6mb and I want to read the whole file easily..should i load to database table and create a file from table? I have found issues reading the file..
- <ArrayOfJobClass xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <JobClass>
- <Triggers>
- <TriggerClass>
<ExpireActionType>Delete</ExpireActionType>
<ExpireType>DateTime</ExpireType>
<TriggerType>TimeType</TriggerType>
- <TTime>
<TimeTriggerType>Custom</TimeTriggerType>
<IntervalType>Daily</IntervalType>
<SpecificType>Days</SpecificType>
<FirstLastType>First</FirstLastType>
<IntervalValue>1</IntervalValue>
<FirstLastWeekDay>Monday</FirstLastWeekDay>
<InitDate>2009-05-04T14:17:05.40625-07:00</InitDate>
- <IntervalDays>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>
<boolean>false</boolean>

You can load it in the database in an XMLType table (Object-Relational or Binary XML storage), use XQuery on the XML content and then write back the result to a file.
Or, you might just use an external processor (XSLT or XQuery).
If you want to stay in the Oracle world, you can use :
- For XSLT : $ORACLE_HOME/bin/oraxsl (it's a wrapper for the java XSLT engine)
- For XQuery : the java XQuery API
Personally, I sometimes use the Saxon XSLT and XQuery processor, quite efficient.
Here's a simplistic example with oraxsl utility :
emp.xml
<?xml version="1.0" encoding="UTF-8"?>
<emps>
<emp id="7369">
    <name>SMITH</name>
    <job>CLERK</job>
    <salary>800</salary>
</emp>
<emp id="7499">
    <name>ALLEN</name>
    <job>SALESMAN</job>
    <salary>1600</salary>
</emp>
<emp id="7521">
    <name>WARD</name>
    <job>SALESMAN</job>
    <salary>1250</salary>
</emp>
<emp id="7566">
    <name>JONES</name>
    <job>MANAGER</job>
    <salary>2975</salary>
</emp>
<emp id="7654">
    <name>MARTIN</name>
    <job>SALESMAN</job>
    <salary>1250</salary>
</emp>
</emps>
emp.xsl
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
<xsl:template match="text()"/>
<xsl:template match="emps/emp[job='SALESMAN']">
<xsl:copy-of select="."/>
</xsl:template>
</xsl:stylesheet>Applying the transformation to search and extract all "salesmen" :
D:\ORACLE\test>%ORACLE_HOME%\bin\oraxsl emp.xml emp.xsl result.xml
D:\ORACLE\test>type result.xml
<?xml version = '1.0' encoding = 'UTF-8'?>
<emp id="7499">
    <name>ALLEN</name>
    <job>SALESMAN</job>
    <salary>1600</salary>
</emp><emp id="7521">
    <name>WARD</name>
    <job>SALESMAN</job>
    <salary>1250</salary>
</emp><emp id="7654">
    <name>MARTIN</name>
    <job>SALESMAN</job>
    <salary>1250</salary>
</emp>

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

I had this video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder.

I had a video file and I was trying to flip it to a format that would work with iMovie. It used to have the Quicktime image with it. So, I assume it was a QT file. But, somehow I've changed the file from a video to a folder. I've tried to undo the action. No luck. I wasn't running my Time Machine. So, I can't go back. Help. It's the only copy of this video.

I've tried to undo the action.
How?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.
it's the only copy of this video.
Where did you get the video from?
From the pic I noticed that the folder is 841.9mb. What's inside? Or what happens when you click on it?

Creating JPEG file from .MOV video

Similar Messages

Maybe you are looking for