Creating KSB1 Report in BI
HI,
I would like to create a report which has a similar nature of KSB1 standard report in SAP.
My requirement is to have an additional column to KSB1 report using BW, which carries the correct name using the personnel number in the layout.
I have some clarification with respect to this development.
I have an offsettng account column which has the respective details of account type for example in case of account type GL it carries the account number. this can carry any one of AKDMS(account types). Is it possible to pull out the same data using BW report.
Thanks
Subhash
Hi Subhash,
Check if you can create a Database View or a Infoset based on all the requirements you have. If yes then create a Datasource based on this View and then you can extract this data into BW.
Regards
Pratap Sone
Similar Messages
-
Create a report same as KSB1 and add WBS line item details in the output
Hello Everyone,
I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
What is the right way of doing it? Please advice.
COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
Thanks for all your help.
Regards,
Shipra.
Moderator message - Cross post locked
Edited by: Rob Burbank on May 28, 2009 10:54 AMHai ,
Please go throuth the note 325546 , u need to implement the customer exit COOMEP01 .
regards,
K.Vinay kumar -
Create a report same as KSB1 and add WBS line item details from CJI3
Hello Everyone,
I need to create a report exactly like KSB1 which should have a selection screen exactly like KSB1 but it should also display the WBS line item details from CJI3.
What is the right way of doing it? Please advice.
COEP is pretty huge in Production, and we need to fetch data by a specific date in selection screen or a cost center group. This can take a long time to fetch data from the table based on selection screen input. Are there function modules or do we need to use some other tables to fetch data same as COEP?
Thanks for all your help.
Regards,
Shipra.Hai ,
Please go throuth the note 325546 , u need to implement the customer exit COOMEP01 .
regards,
K.Vinay kumar -
Error while creating a report in BI publisher
Hi all ,
I am getting an error while creating a new report in BI publisher .
the error shown in console is --
java.lang.SecurityException: /
In the front end - i am getting
Operation failed: d:/OracleBI/xmlp/XMLP/Users/~administrator/annapurna/test/test.xdo
please suggest if anyone knows.Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined . -
How to create a report to bring all data from two different Info providers
Hi All,
I have a peculier problem while creating a report. I have two custom info providers one DSO and another Cube. There are only two common fields between these two Info providers . I need to create a report such that the report displays all the values from DSO but user can have the selection option on one of the fields in the Cube.
Here is an example
DSO Contents:
DocNum- DocItem- DocText- Amount- Quantity
10000---- 10---- ABC---- 100---- 10
10001---- 20---- DSN---- 200---- 10
10005---- 20---- DSN---- 200---- 10
Z1003---- 10---- CAN---- 500---- 1
Cube Contents
DocNum- DocItem- Date----- InvoiceAmt
10000---- 10---- 1/10/2009---- 50
10001---- 20---- 2/20/2009---- 100
10005---- 20---- 2/25/2009---- 100
The report needs to be displayed as shown below when the user selects value for date from 1/10/2009 to 2/20/2009
DocNum- DocItem- DocText- Amount- Quantity
10000---- 10---- ABC---- 100---- 10
10001---- 20---- DSN---- 200---- 10
I hope this was clear for you to understand. I would really appricate if any one can answers about how to resolve this problem. I cannot add the date filed to DSO and I also have Doc Num and Item as the user selection fields in the report.
Thank you all in advance and i would really appreciate for your suggestions.
Regards
Chinna
Edited by: chinna2479 on Mar 3, 2009 7:38 PM
Edited by: chinna2479 on Mar 3, 2009 7:39 PMHi chinna,
Two possible options, I can think of now, but both of them may be a compromise with performance.
1. create an infoset and then a query on top of it, provided we have a one to one relation in both the targets. That is, the combination of doc and item number is not duplicate in either cube or ODS.
2. Create a master data object of doc and item number and have date as an attribute. Load that from cube data and make date as navigational attr.
Use this navgntal attr for selection in your report.
Let us know, if you require any further info.
Naveen.A -
How to create a report for open sales orde documents which are not invoiced
Hi Experts this is urgent,
+pls give the Logic for document flow+
My requirement is create a report for sales orders which are not invoiced using the following table.
VBAK : sales order header
VBAP : sales order item
VBFA : sales document flow
VBUK for processing status
KOMV for duties value and sales order value
LIKP : delivery not header
LIPS :delivery note item
For information : In the header level the processing Status is indicated in the table VBUK field LFSTK for one sales order number. A,B , C are the possible entries.
Case A : When a sales order is invoiced we can display information on the header status :
Overall status : Completed and display a invoice number in the document flow. When the items of the sales orders are invoiced the process status is the following : Overall status Completed
Delivery status Fully delivered
Case B : An open sales order not delivered and not invoiced will have overall status : Open on the header and item level and will not have subsequent documents.
Case C :
When the items for the sales order are delivered but not invoiced the status will be u201Cfully deliveredu201D
And the subsequent documents will be delivery notes and good issue if the delivery note is issued.
With regards
ravi
Edited by: ravik ravik on Jun 25, 2008 3:29 PMHello Ravi,
U neednot develop any report..
there is std report with txn V.02
or copy this and make necessary changes.
Reward, if helpful.
Rgds,
Raghu. -
How to create a report based on a DataSet programatically
I'm working on a CR 2008 Add-in.
Usage of this add-in is: Let the user choose from a list of predefined datasets, and create a totally empty report with this dataset attached to is. So the user can create a report based on this dataset.
I have a dataset in memory, and want to create a new report in cr2008.
The new report is a blank report (with no connection information).
If I set the ReportDocument.SetDataSource(Dataset dataSet) property, I get the error:
The report has no tables.
So I must programmatically define the table definition in my blank report.
I found the following article: https://boc.sdn.sap.com/node/869, and came up with something like this:
internal class NewReportWorker : Worker
public NewReportWorker(string reportFileName)
: base(reportFileName)
public override void Process()
DatabaseController databaseController = ClientDoc.DatabaseController;
Table table = new Table();
string tabelName = "Table140";
table.Name = tabelName;
table.Alias = tabelName;
table.QualifiedName = tabelName;
table.Description = tabelName;
var fields = new Fields();
var dbField = new DBField();
var fieldName = "ID";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
dbField = new DBField();
fieldName = "IDLEGITIMATIEBEWIJS";
dbField.Description = fieldName;
dbField.HeadingText = fieldName;
dbField.Name = fieldName;
dbField.Type = CrFieldValueTypeEnum.crFieldValueTypeInt64sField;
fields.Add(dbField);
// More code for more tables to add.
table.DataFields = fields;
//CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo info =
// new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//info.Attributes.Add("Databse DLL", "xxx.dll");
//table.ConnectionInfo = info;
// Here an error occurs.
databaseController.AddTable(table, null);
ReportDoc.SetDataSource( [MyFilledDataSet] );
//object path = @"d:\logfiles\";
//ClientDoc.SaveAs("test.rpt", ref path, 0);
The object ClientDoc referes to a ISCDReportClientDocument in a base class:
internal abstract class Worker
private ReportDocument _ReportDoc;
private ISCDReportClientDocument _ClientDoc;
private string _ReportFileName;
public Worker(string reportFileName)
_ReportFileName = reportFileName;
_ReportDoc = new ReportDocument();
// Load the report from file path passed by the designer.
_ReportDoc.Load(reportFileName);
// Create a RAS Document through In-Proc RAS through the RPTDoc.
_ClientDoc = _ReportDoc.ReportClientDocument;
public string ReportFileName
get
return _ReportFileName;
public ReportDocument ReportDoc
get
return _ReportDoc;
public ISCDReportClientDocument ClientDoc
get
return _ClientDoc;
But I get an "Unspecified error" on the line databaseController.AddTable(table, null);
What am i doing wrong? Or is there another way to create a new report based on a DataSet in C# code?Hi,
Have a look at the snippet code below written for version 9 that you might accommodate to CR 2008, it demonstrates how to create a report based on a DataSet programmatically.
//=========================================================================
+ * the following two string values can be modified to reflect your system+
+ ************************************************************************************************/+
+ string mdb_path = "C:
program files
crystal decisions
crystal reports 9
samples
en
databases
xtreme.mdb"; // path to xtreme.mdb file+
+ string xsd_path = "C:
Crystal
rasnet
ras9_csharp_win_datasetreport
customer.xsd"; // path to customer schema file+
+ // Dataset+
+ OleDbConnection m_connection; // ado.net connection+
+ OleDbDataAdapter m_adapter; // ado.net adapter+
+ System.Data.DataSet m_dataset; // ado.net dataset+
+ // CR variables+
+ ReportClientDocument m_crReportDocument; // report client document+
+ Field m_crFieldCustomer;+
+ Field m_crFieldCountry;+
+ void CreateData()+
+ {+
+ // Create OLEDB connection+
+ m_connection = new OleDbConnection();+
+ m_connection.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + mdb_path;+
+ // Create Data Adapter+
+ m_adapter = new OleDbDataAdapter("select * from Customer where Country='Canada'", m_connection);+
+ // create dataset and fill+
+ m_dataset = new System.Data.DataSet();+
+ m_adapter.Fill(m_dataset, "Customer");+
+ // create a schema file+
+ m_dataset.WriteXmlSchema(xsd_path);+
+ }+
+ // Adds a DataSource using dataset. Since this does not require intermediate schema file, this method+
+ // will work in a distributed environment where you have IIS box on server A and RAS Server on server B.+
+ void AddDataSourceUsingDataSet(+
+ ReportClientDocument rcDoc, // report client document+
+ System.Data.DataSet data) // dataset+
+ {+
+ // add a datasource+
+ DataSetConverter.AddDataSource(rcDoc, data);+
+ }+
+ // Adds a DataSource using a physical schema file. This method require you to have schema file in RAS Server+
+ // box (NOT ON SDK BOX). In distributed environment where you have IIS on server A and RAS on server B,+
+ // and you execute CreateData above, schema file is created in IIS box, and this method will fail, because+
+ // RAS server cannot see that schema file on its local machine. In such environment, you must use method+
+ // above.+
+ void AddDataSourceUsingSchemaFile(+
+ ReportClientDocument rcDoc, // report client document+
+ string schema_file_name, // xml schema file location+
+ string table_name, // table to be added+
+ System.Data.DataSet data) // dataset+
+ {+
+ PropertyBag crLogonInfo; // logon info+
+ PropertyBag crAttributes; // logon attributes+
+ ConnectionInfo crConnectionInfo; // connection info+
+ CrystalDecisions.ReportAppServer.DataDefModel.Table crTable;+
+ // database table+
+ // create logon property+
+ crLogonInfo = new PropertyBag();+
+ crLogonInfo["XML File Path"] = schema_file_name;+
+ // create logon attributes+
+ crAttributes = new PropertyBag();+
+ crAttributes["Database DLL"] = "crdb_adoplus.dll";+
+ crAttributes["QE_DatabaseType"] = "ADO.NET (XML)";+
+ crAttributes["QE_ServerDescription"] = "NewDataSet";+
+ crAttributes["QE_SQLDB"] = true;+
+ crAttributes["QE_LogonProperties"] = crLogonInfo;+
+ // create connection info+
+ crConnectionInfo = new ConnectionInfo();+
+ crConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;+
+ crConnectionInfo.Attributes = crAttributes;+
+ // create a table+
+ crTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();+
+ crTable.ConnectionInfo = crConnectionInfo;+
+ crTable.Name = table_name;+
+ crTable.Alias = table_name;+
+ // add a table+
+ rcDoc.DatabaseController.AddTable(crTable, null);+
+ // pass dataset+
+ rcDoc.DatabaseController.SetDataSource(DataSetConverter.Convert(data), table_name, table_name);+
+ }+
+ void CreateReport()+
+ {+
+ int iField;+
+ // create ado.net dataset+
+ CreateData();+
+ // create report client document+
+ m_crReportDocument = new ReportClientDocument();+
+ m_crReportDocument.ReportAppServer = "127.0.0.1";+
+ // new report document+
+ m_crReportDocument.New();+
+ // add a datasource using a schema file+
+ // note that if you have distributed environment, you should use AddDataSourceUsingDataSet method instead.+
+ // for more information, refer to comments on these methods.+
+ AddDataSourceUsingSchemaFile(m_crReportDocument, xsd_path, "Customer", m_dataset);+
+ +
+ // get Customer Name and Country fields+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Customer Name", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCustomer = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ iField = m_crReportDocument.Database.Tables[0].DataFields.Find("Country", CrFieldDisplayNameTypeEnum.crFieldDisplayNameName, CeLocale.ceLocaleUserDefault);+
+ m_crFieldCountry = (Field)m_crReportDocument.Database.Tables[0].DataFields[iField];+
+ // add Customer Name and Country fields+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCustomer);+
+ m_crReportDocument.DataDefController.ResultFieldController.Add(-1, m_crFieldCountry);+
+ // view report+
+ crystalReportViewer1.ReportSource = m_crReportDocument;+
+ }+
+ public Form1()+
+ {+
+ //+
+ // Required for Windows Form Designer support+
+ //+
+ InitializeComponent();+
+ // Create Report+
+ CreateReport();+
+ //+
+ // TODO: Add any constructor code after InitializeComponent call+
+ //+
+ }+//========================================================================= -
Error while creating a report that uses Oracle OCI JDBC connectivity
Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PMHi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM -
OBI 11G sUnquotedTableName.empty() error while creating a report
hello guru's
We have a problem when trying to build a report in OBI 11G. We have migrated an RPD from 10 to 11 and one 1 installation DEV all is OK, on TEST we get all kind of problems.
One of the main issues is when trying to build a report and clicking on the + to expand a node of a dimension object we hget the sUnquotedTableName.empty() error
When going to the logs I see the following details of the error.
Does anyone have a clue and can help us out?
Koen Verheyen
ProblemhMessage Level 10
Relationship ID 0:1
Component OBIPS
Module saw.httpserver.processrequest
Host XXXXXXX
Host IP Address XXXXXX
Thread ID 2836335504
ECID 0000Ijcd5UzFw000jzwkno1Clgr10001eK
Message
Assertion failure: !sUnquotedTableName.empty() at line 1936 of /scratch/aime1/adestore/views/aime1_dadvfa0138/bifndn/analytics_web/main/project/webutil/tablenameutils.cpp
Supplemental Detail
File:tablenameutils.cpp
Line:1936
Location:
saw.httpserver.processrequest
saw.rpc.server.responder
saw.rpc.server
saw.rpc.server.handleConnection
saw.rpc.server.dispatch
saw.threadpool
saw.threads
SessionID: 07vh3ae7bqk8nsnslpm32fhtcm9nsc5cd7va98q
AuthProps: AuthSchema=UidPwd|PWD=******|UID=koen_verheyen|User=koen_verheyen|RunAs=koen_verheyen
ecid: 0000Ijcd5UzFw000jzwkno1Clgr10001eK,0:1
ThreadID: 2836335504
HttpCommand: JSONRequestTableColumns
RemoteIP: 10.10.1.15
HttpArgs:Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined . -
Unable to create a report in bi publisher 10g
Hi All,
Unable to create a report in bi publisher. When we tried to create a report abcd, then it is giving the below error.
Operation failed: /abcd/abcd.xdo.
When we tried to create a report with the existing name, it is saying
An object with the same name already exists: /crm/crm.xdo
I can say this is not any permissions problem, I have logged inwith Administrator user.
ThanksHi,
Can any one..??? -
Creat a report in bi publisher based on dashboards
Hi,
Do you know if is possible creat a report in BIP with the same information and format that is in the dashboards?
Thank youI would think you can in most cases - but there is no automated tool.
Steps I would take is
1) create a new report with the parameters shown in the dashboard.
2) Add a query with the logical SQL from each answer report.
3) Add where conditions based on parameters
4) create a BI Publisher report in the word template based on this data.
Klaus -
Facing problem while creating a report on the value of a UDM in oem gc
Hi,
I have created a report in OEM grid control. I have selected a host for this. And I have selected an UDM from the metric list. The report works fine shows the correct graph in the report.
The problem is that along with the value from the respective udm , I am also getting the values from other metrics.
Between, I also noticed that the metric I selected is not highlighted when visited next time to the report edit page. I guess this could be the cause but dont know how to fix it. May be I am wrong, If any other issues or suggestions to my problem , Please Advise.
Thanks in advance.It is 10.2.0.5. I guess it is a bug but where to check for confirmation.
Thanks.
Edited by: Kuldip on Jul 22, 2010 11:15 PM -
How to create APEX report from data in PLSQL table
Hi, I have a procedure that is creating/inserting records into multidimensional pslql table. I want to create a report and graph based on the data stored in plsql table. Can someone please advice how to can I select this data in apex OR point me to any sample code?
Thanks
AaliHi,
try to google something about ORACLE TABLE CAST
SELECT ot.yourcolumn
FROM
TABLE(CAST(yourplsqltablevariable AS userdefinedoracletype)) otE.g.
http://it.toolbox.com/blogs/oracle-guide/using-a-plsql-table-in-sql-11013
Regards,
R. -
APEX4: How to create a report whose data is based on user input date fields
Using Apex 4 I've to create a report that allows the user to input two date and shows a report between the date range.
How can I do this?
Thank you.This has nothing to do with apex 4.0. If you create a report using this query:
SELECT *
FROM emp
WHERE hiredate BETWEEN NVL (TO_DATE (:p1_date_from, 'mm/dd/yyyy'), hiredate)
AND NVL (TO_DATE (:p1_date_to, 'mm/dd/yyyy'), hiredate)and create two date picker items with names P1_DATE_FROM and P1_DATE_TO (take care of using the right date format), your report will show all records by default and those that match after you fill in the date items.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
------------------------------------------------------------------- -
How to create a report with dynamic columns
Hi all,
I am using Apex 4.0 with Oracle 10g
I am creating a report and I need to display columns dynamically based on the item values.
example:
I have a table employee with columns name, designation, sal
In the report page i have a select list with designations and when I select a designation from the select list,
I need to display the names of the employees horizontally,
like each name as a new column in the report with that particular designation. and same has to continue when I select different designations.
Can some one help me how we can do that.
I appreciate your answer
Thanks,
RikEssentially you want to write a pl/sql function which returns a varchar2 string. The contents of the string must be a valid sql statement.
Once you have done this, you need to add a report region as type sql report and you will have the option of writing it as a query or as a function returning query. Choose function returning query and enter in the function call.
Note your function must be valid, and must be executable by your apex parsing schema.
example:
create or replace
function test_report( p1_tablename in varchar2)
return varchar2
is
v_query varchar2(4000);
begin
v_query :=
'SELECT * from '||p_tablename;
return v_query;
end test_report;Edited by: Keith Jamieson on Aug 15, 2011 4:50 PM
Maybe you are looking for
-
Why does ENET-232 driver use 98% CPU?
I have an ENET-232/4 device running under Windows XP Professional and am talking to it using LabVIEW 6.1. I am taking readings from an instrument every 5 seconds, with a small data exchange (6 byte command, response is about 50 bytes). Everything see
-
I have a database named synteldb,which is in oracle 8i.I want to replicate the entire database.I'm planning for multi master replication in 8i(OS windows XP).For that i created another database named synteldbbkup.From this point i need some help on r
-
Adobe Captivate Help | Edit audio
This question was posted in response to the following article: http://helpx.adobe.com/captivate/using/edit-audio.html
-
Create directory issue in Store Procedure
Hi Guys, can any one help? I am using XP, Oracle 10g, sql developer and Sql Plus. I am trying to create directory in storeprocedure, but it not let me to do that thing. below is the statement i am using create or replace directory public_access as '/
-
Hi Gurs, In mB51 we have few variants that are protected by a user. But the user no longer works with the organization. How can we unprotect the variant Thanks Anusha