Creating large video portfolio site? Project's getting slow and buggy? Here's a solution:
If, like me, you're creating a large video portfolio site (over 50 vids) in Edge, you may find after a while elements on the stage start to vanish (they're still there but invisible) and the program REALLY slows down. And lots of crashes. I've asked the experts and the response generally seems to be "Site's way too big!" HOWEVER, I have a good workaround:
After importing a Mpeg4 and Webm file into the video library, put it into your design, animate it, add functions, preview it, etc - then DELETE it from the media folder! The elements remain with all the attributes and code attached on the timeline, stage and elements window - but it's just a placeholder. Once you've done this, you can move on adding more and more videos, repeating this process. The project file never gets too big or slow! Then right at the end, put all the Mpeg4 and webm files back in the media folder. You might not be able to launch the project and preview (it'll be too big) but you can still drop it on your browser to check. And, if all's good, upload. If there are things that still need fixing, take the video files back out the Media folder so that when you launch the project file again to make amendments, it'll run smoothly. After fixing, put the videos back.
Hopefully in the next full version, Edge is made more robust and able to tackle.
If, like me, you're creating a large video portfolio site (over 50 vids) in Edge, you may find after a while elements on the stage start to vanish (they're still there but invisible) and the program REALLY slows down. And lots of crashes. I've asked the experts and the response generally seems to be "Site's way too big!" HOWEVER, I have a good workaround:
After importing a Mpeg4 and Webm file into the video library, put it into your design, animate it, add functions, preview it, etc - then DELETE it from the media folder! The elements remain with all the attributes and code attached on the timeline, stage and elements window - but it's just a placeholder. Once you've done this, you can move on adding more and more videos, repeating this process. The project file never gets too big or slow! Then right at the end, put all the Mpeg4 and webm files back in the media folder. You might not be able to launch the project and preview (it'll be too big) but you can still drop it on your browser to check. And, if all's good, upload. If there are things that still need fixing, take the video files back out the Media folder so that when you launch the project file again to make amendments, it'll run smoothly. After fixing, put the videos back.
Hopefully in the next full version, Edge is made more robust and able to tackle.
Similar Messages
-
FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...
You're in totally the wrong place... this is the Mac Pro (no Book) forum for hardware. You want
Final Cut Pro X: Professional Applications: Apple Support Communities
Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy. If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
Good luck -
Hello
since this morning when i try to watch a video in youtube fullscreen the video gets slow and its cuts off. it happens only in firefox Help me please.if i watch the video in you tube normal size its correct the problem is just in fullscreen mode.You can check for problems caused by recent Flash updates and try these:
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows -
My computer won't play videos from site like the Daily Show and the CW, but they stopped working last week. I have the newest version of Adobe player. Anyone know why the full videos will not play?
I failed to mention that the sound does play on the videos that are not playing.
-
IMac getting slower -and Im getting more frustrated!
Like others it would appear.... I am finding my iMac is getting slower and slower with each day that passes since upgrading to Mavericks. It is slow to open and close apps. Slow to open mail. Often hangs with the little ball spinning forever and I have to hold the start button to shut down. I've even noticed that simple scrolling jumps all over the place as it is slow to respond. iMessage is often up to 4 minutes behind! I noticed that others have used EtreCheck which has been helpful to those 'in the know'. Any helpful advice would be greatly appreciated, as I have no diea what's what! Thank you.
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
ATI Radeon HD 4670 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 4:47:57
Disk Information:
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 999.35 GB (446.25 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
PIONEER DVD-RW DVRTS09
USB Information:
Canon MP495 series
Apple Inc. Built-in iSight
TOSHIBA USB 3.5"-HDD 1.5 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine Backup (disk1s2) /Volumes/Time Machine Backup: 1.5 TB (7.02 GB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6)
Problem System Launch Daemons:
Problem System Launch Agents:
[loaded] com.paragon.NTFS.notify.plist 3rd-Party support link
Launch Daemons:
[loaded] com.adobe.fpsaud.plist 3rd-Party support link
[loaded] com.google.keystone.daemon.plist 3rd-Party support link
[loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[loaded] com.rim.BBDaemon.plist 3rd-Party support link
Launch Agents:
[loaded] com.google.keystone.agent.plist 3rd-Party support link
[loaded] com.rim.BBAlbumArtCacher.plist 3rd-Party support link
[loaded] com.rim.BBLaunchAgent.plist 3rd-Party support link
User Launch Agents:
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist 3rd-Party support link
[loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist 3rd-Party support link
[failed] SOS.OnlineBackup.LaunchAgent.plist 3rd-Party support link
User Login Items:
MyTomTomSA (EMMA)
iTunesHelper
BusyCalAlarm
LivedriveCore
Dropbox
Canon IJ Network Scanner Selector2
Dropbox App ONLY
Internet Plug-ins:
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24 - SDK 10.8 3rd-Party support link
OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
EPPEX Plugin: Version: 3.0.5.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
MacFUSE 3rd-Party support link
Paragon NTFS for Mac ® OS X 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
TomTomHOMERunner: Version: 2.9.2.1693 - SDK 10.4 3rd-Party support link
/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
/Users/[redacted]/Library/Application Support/Helper
Wondershare Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
Aimersoft Helper Compact: Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
Wondershare Helper Compact: Version: 2.2.6.0 - SDK 10.5 3rd-Party support link
/Applications/Wondershare Helper Compact/Wondershare Helper Compact.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Music Healing - Free: Version: 1.0 - SDK 10.0 3rd-Party support link
Rename A Better Finder 8: Version: 8.77 - SDK 10.0 3rd-Party support link
Healing Voice | Lite: Version: 1.1 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 930.71 GB Disk used: 515.11 GB
Destinations:
Time Machine Backup [Local] (Last used)
Total size: 1
Total number of backups: 180
Oldest backup: 2011-03-13 08:43:29 +0000
Last backup: 2014-01-22 16:30:29 +0000
Size of backup disk: Too small
Backup size 1 < (Disk used 515.11 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
58% PluginProcess
15% com.apple.WebKit.Networking
8% WindowServer
2% Safari
1% EtreCheck
Top Processes by Memory:
156 MB com.apple.MediaLibraryService
156 MB Quicken Essentials
156 MB iTunes
111 MB softwareupdated
106 MB com.apple.WebKit.WebContent
Virtual Memory Information:
320 MB Free RAM
1.66 GB Active RAM
1.08 GB Inactive RAM
647 MB Wired RAM
2.78 GB Page-ins
255 MB Page-outsA.
Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock all your user files, reset their ownership, and remove their access-control lists. If you've set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Back up all data.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
B.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
From the application's menu bar, select
File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Boot in safe mode to rebuild the font caches. Boot again as usual and test.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. In that case, ask for instructions.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.
C.
"BlackBerry Desktop Manager" is incompatible with Mavericks and should be removed.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
Back up all data before making any changes.
You will generally have to reboot in order to complete an uninstallation. Until you do that, the uninstallation may have no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
WARNING: Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
WiFi Connection Gets Slower and Slower
I have a TG862G/CT Arris (Comcast) router. The WiFi connection worked great for more than 6 months. I use Chrome browser with Windows 7.
Recently (last 3+ weeks) something changed. (I haven't move or blocked the router; still connecting with exact same computers.) When I first connect I have very fast connection (response), but after 5 to 10 minutes the response gets slower and slower and finally pages don't load. I get "waiting" messages in the lower left hand side of the screen. The browser tab finally shows the name of the web site, but the screen remains blank.
I would appreciate any help with how to trouble shoot this problem so it can be resolved.
Thanks and best regards.Hi Cam
Are you using a 3rd party router or an Apple Airport Unit? If the latter, make sure you are using the latest Airport Firmware. If not sure, open Airport Utility in your Applications>Utilities folder. Latest version is 7.4.2. If not, update the firmware via the Base Station Menu (you need to first click on your Airport Unit in the Utilities panel). Otherwise, a soft (unplug/wait/plugin) or hard reset of your Airport Unit might help.
If a 3rd party router, make sure the firmware is up-to-date. If it is, then a reset of the unit may help.
Also, the Airport card in the machine, or the router unit may be failing. Former case, run the Apple Hardware Test - note this Apple document is for mid 2007 machines and later.
As an aside, when creating a thread with a question, best to leave the "question box" in your original post panel checked. Otherwise, it may not be apparent you need assistance.
Message was edited by: Hawaiian_Starman -
Mac book pro getting slower and slower
My 3 tear old mac book pro is getting slower, and slower and slower?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac -
My iMac is getting slower and slower
My Mac (3.2GHz Intel Core i3 4GB Memory) is about 4 years old and has been getting slower and slower over the last 5 or 6 months. An earlier post recommended using 'Etracheck' which I have done and attached the information below. I think I may have a Ram issue but I would be grateful for any comments.
Thanks
Hardware Information: ℹ️
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 3.2 GHz Intel Core i3 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 6 days 16:10:12
Disk Information: ℹ️
SAMSUNG HD103SJ disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (629.98 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Canon MG4200 series
Primax USB OPTICAL MOUSE
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital My Passport 070A 999.5 GB
S.M.A.R.T. Status: Verified
EFI (disk4s1) <not mounted> : 210 MB
Backup (disk4s2) <not mounted> : 999.16 GB
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBLaunchAgent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
BlackBerry Device Manager ApplicationHidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
Internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.12 Support
EPPEX Plugin: Version: 10.0 Support
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Picasa: Version: 1.0 - SDK 10.4 Support
Safari Extensions: ℹ️
Slick Savings
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 369.37 GB
Destinations:
Backup [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 369.37 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
0% AppleSpell
0% BBLaunchAgent
0% coreservicesd
0% Microsoft Word
Top Processes by Memory: ℹ️
180 MB Mail
176 MB iTunes
64 MB softwareupdated
52 MB Safari
47 MB mds_stores
Virtual Memory Information: ℹ️
35 MB Free RAM
824 MB Active RAM
808 MB Inactive RAM
652 MB Wired RAM
19.96 GB Page-ins
1.41 GB Page-outsThese instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Standard BT Exchange speeds just get slower and sl...
St.Athan exchange, Vale of Glamorgan, S.Wales - Over the last year the speeds I am able to get from my broadband connection are just getting slower and slower. A year ago I could just stream video (important since my business deals in this medium). However, now not only can I not stream video, I have trouble doing the most basic of internet business. Not only is my line speed slow (2mbs tops) but it drops out all the time.
I know it is not my service provider at fault or my house lines because all my neighbours are having the same problem and are with differing ISP's.
It must be that the exchange is getting steadily more oversubscribed and can no longer handle the amount of work it is being asked to do.
I think that my only option (and others in the area) is to completely ditch the BT landline and opt for mobile internet. The speeds available on mobile internet using a device like 3's MiFi arent fantastic but they should at least blow my BT connection away.As you have stated that you are a business user, then try the Business forum here http://business.forums.bt.com/
they are more likely to be able to help you, as this forum is for domestic customers of BT Broadband.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
NI Session Manager gets slower and slower from call to call!
I have the following problem with NI-Session-Manager:
I use Session Manager a lot on my test systems. Now that I have a test system running that makes many Session Manager Calls I noticed that after a while the system gets slower and slower. I�ve attached a Sequence File, which demonstrates this problem.
This sequence file is based on the LV Session Manager Example, which ships with TestStand.
Instructions: In the UI-Msg Field of the Sequence Editor you will see how long the actual run took to execute. Every run makes 500 calls to Session Manager. You will notice that every run takes a little bit longer than the previous. After 100 runs the difference is significant.
Although my example uses a COM
port to demonstrate the problem this problem is really related to Session Manager because the same happens if I use an IVI-Instrument (i.e. NI-DMM, NI-Switch, �)
Any help appreciated!
Regards
Herbert
Herbert Koltschik
Sagem Communication Austria
[email protected]
Attachments:
sessionmgr_-_slow_down_problem.zip 63 KBHerbert -
Thanks for the feedback. I will look into item (1).
The design of the session manager was to solve the problem of only having to share an instrument within a multithread application. If the session already exists, than you get the same session and thus the same handle, and the instrument is only initialize once and closed after the session no longer exists.
In the case of a C++ based program you would have to add the session as a member variable that has a specific lifetime. When the object is release, so will the session.
In the case of an application like TestStand, you just attach the session to the execution. Once the execution goes away, the session may go away if no other execution is using it.
In the case of L
abVIEW being called from TestStand, you are using VIs as subroutines, so either the application (TestStand) must manage the lifetime of the session, or the VI subroutine must deligate the lifetime control to a "global" VI. The item you attach to the global could be the refnum itself or the SMgr session. One way of doing this would be to create a VI that serves the refnum to you but internally manages the lifetime of the ActiveX references to the Session Manager sessions. This would be a simple vector of names and their sessions. When called the VI would lookup and return a refnum from an existing session or create a new session and return a refnum for it.
Scott Richardson
Scott Richardson
National Instruments -
Prepared Statemet executeQuery() getting slower and slower
Hi,
I have a servlet that do the following:
1.- Construct the where clause for a query with the data the user has sent.
2.- Get a connection from the pool.
3.- Load a temporary table with a select that uses the where clause created on the first step.
4.- Create a prepared statement as simple as "select * from temp_table where rownum < 500"
5.- While there is still data on the temporary table, loop
5.1.- Extract the information of the result set the Prepared Statemet executeQuery() returns.
5.2.- Delete the rows of the temporary table that had been read on the 5.1 step
5.3.- Check if there is more data
6.- Close the result set, statements, ...
The first runs of the loop are very fast, on the order of 500 ms. When the servlet has executed some times the loop, each run of the loop starts getting slower and slower, growing the time of the loop with each run.
Do anyone knows why the loop takes longer and longer with each run?
Regards,
CptnAgua... initialization of the servlet and reading the parameters
// The connection object is created and get a connection
// from the application servlet pool
ConexionBaseDatos bbdd;
bbdd = new ConexionBaseDatos();
try {
bbdd.conecta();
} catch (Exception e) {
... exception code
String sql;
String where = " where 1=1";
the where clause is created depending on the parameters received by the sevlet
String insert;
// here all the variables are created and most of them initialized
insert = "insert into temp_table select * from conciliation_v x " + where;
Statement stmt = null;
PreparedStatement prepStmt = null;
ResultSet rs = null;
SimpleDateFormat formatoFecha = null;
Date hoy = null;
FileWriter fstream = null;
BufferedWriter file = null;
String rowid_update = "";
String rowid_select = "";
formatoFecha = new SimpleDateFormat("yyyyMMddHHmmss");
hoy = new Date();
nombreFichero = "";
// the floder where the servlet is going to store the output is read
// from the server.xml
nombreFichero =
this.getInitParameter("DirectorioEscritura") + nombreFichero;
File fichero = new File(nombreFichero);
// if the file already exists, the servlet stops.
if (fichero.exists()) {
out.println("El fichero especificado ya existe.");
... exception code
LogManager.shutdown();
return;
sql = "select * from temp_table where rownum < 500";
fstream = new FileWriter(nombreFichero);
file = new BufferedWriter(fstream);
try {
// here the temp table is filled with the update string already defined
stmt = bbdd.getStmt();
stmt.executeUpdate(insert);
// and the query is preparsed
prepStmt = bbdd.getPrepStmt(sql);
prepStmt.setFetchSize(500);
} catch (SQLException e) {
... exception code
String linea;
String field1 = "";
String field2 = "";
String field3 = "";
String field4 = "";
String field5 = "";
String field6 = "";
String field7 = "";
String field8 = "";
String field9 = "";
String field10 = "";
String field11 = "";
String field12 = "";
String field13 = "";
boolean hayValores = true;
// the loop starts
while (hayValores) {
hayValores = false;
try {
// The preparsed statement is executed
rs = prepStmt.executeQuery();
} catch (SQLException e) {
... exception code
try {
while (rs.next()) {
hayValores = true;
try {
field1 =
lPad(rs.getString("field1"), 10); //50
field2 =
lPad(rs.getString("field2"), 18); //18
field3 =
lPad(rs.getString("field3"), 10); //0
field4 =
lPad(rs.getString("field4"), 50); //50
field5 =
lPad(rs.getString("field5"),
20); //10 + number
field6 =
lPad(rs.getString("field6"), 16); //number
field7 =
lPad(rs.getString("field7"),
10); // 10
field8 =
lPad(rs.getString("field8"), 10); //10
field9 = lPad(rs.getString("field9"), 1); //1
field10 = lPad(rs.getString("field10"), 10); // 0
field11 = lPad(rs.getString("field11"), 10); // 0
field12 = lPad(rs.getString("field12"), 10); // 0
field13 = lPad(rs.getString("field13"), 10); // 0
rowid_update =
rowid_update + "rowid = '" + rs.getString("a_rowid") +
"' OR ";
rowid_select =
rowid_select + "'" + rs.getString("a_rowid") +
} catch (Exception exp) {
... exception code
linea =
field1 + field2 + field3 + field4 +
field5 + field6 +
field7 + field8 +
field9 + field10 + field11 + field12 + field13 +
"\r\n";
file.write(linea);
} catch (Exception e) {
... exception code
file.flush();
if (hayValores) {
String delete;
delete =
"delete from temp_table where a_rowid in (" +
rowid_select.substring(0, rowid_select.length() - 2) +
rowid_select = "";
try {
stmt.executeUpdate(delete);
} catch (Exception exp) {
... exception code
file.close();
try {
rs.close();
} catch (Exception e) {
... exception code
try {
prepStmt.close();
} catch (Exception e3) {
... exception code
Do the already extracted lines must be flagged as extracted?
if (tipoExtraccion.toUpperCase().equals("AUTO") ||
marca.toUpperCase().equals("S")) {
if (!(rowid_update.equals(""))) {
rowid_update =
rowid_update.substring(0, rowid_update.length() - 3);
String update =
"UPDATE sys_conciliation.conciliation " + "SET FECHA_INTEGRADO = SYSDATE " +
"WHERE " + rowid_update;
try {
stmt.executeUpdate(update);
bbdd.commit();
} catch (SQLException e) {
... exception code
try {
bbdd.close();
} catch (Exception e) {
... exception code
try {
stmt.close();
} catch (Exception e) {
... exception code
out.println("OK");
out.close();
LogManager.shutdown();
public String rPad(String campo, int longitud) {
if (campo == null) {
campo = "";
int lcampo = campo.length();
if (lcampo > longitud)
return (campo.substring(0, longitud));
if (lcampo == longitud)
return (campo);
String nuevoCampo = campo;
for (int a = 0; a < longitud - lcampo; a++) {
nuevoCampo = nuevoCampo + " ";
return (nuevoCampo);
public String lPad(String campo, int longitud) {
if (campo == null) {
campo = "";
int lcampo = campo.length();
if (lcampo > longitud)
return (campo.substring(0, longitud));
if (lcampo == longitud)
return (campo);
String nuevoCampo = campo;
for (int a = 0; a < longitud - lcampo; a++) {
nuevoCampo = " " + nuevoCampo;
return (nuevoCampo);
}Message was edited by:
CptnAgua -
Imac getting slow and slowerrrrrr
My mac has been getting slower and slower. Some pages take too long or don't come up. Have to re-boot ofter. Went to Utilities and did disk checking on the HD. Reloaded my original Disc 1 while disk checking and nothing improved. Have nothing big on my computer. Just Internet mostly. Do I need to buy a new and larger HD or what?
See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
How to Speed up Macs, ,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths and
Myths of required versus not required maintenance for Mac OS X for information. -
Getting slower and slower... Mail.app
hello,
my ipod touch (1st generation, 16 GB, a lot of free space, newest os) get getting slower and slower... f.e. in mail it takes up to 15/20 seconds to change the postbox or account (after deleting mails). I did restart the ipod, too.
Any idea, what I can do to get Mail faster?
Takk
Claushello,
With Mail closed, you could always test whether your sent mailbox is too large by copying it in Finder.
~/Library/Mail/YourEmailaccountName/Sent Messages.mbox
and pasting it to say, the Documents folder, then in Mail you could delete all of your sent messages and see if that makes a difference.
If you wanted the sent.mbox back you would import it from where you copied it to, via Mail > File, Import Mailboxes and select it. I don't know if this is the problem though, but you could at least exclude it as a possiblity. -
Image Reading getting slower and slower
Hi,
I'm working on a tool that reads each pixel of an image, get the color, and finally make some statistics.
I multithread this tool, allowing it to read several images.
Here is the call() method (my class implements Callable<>)
public StatResult call() throws IOException {
long begin = System.currentTimeMillis();
List<SharpColor> tColors = new LinkedList<SharpColor>();
BufferedImage img = ImageIO.read(file);
Raster raster = img.getData();
Long totalNumber = 0L;
for (int x = 0; x < raster.getWidth(); x++) {
for (int y = 0; y < raster.getHeight(); y++) {
totalNumber++;
SharpColor col = new SharpColor(img.getRGB(x, y));
if (tColors.contains(col)) {
tColors.get(tColors.indexOf(col)).incrementNumber();
} else {
tColors.add(col);
System.out.printf("End of stat on the file %s in %d ms (Thread: %s)\n", image.getPdfFile().getAbsolutePath(), (System.currentTimeMillis() - begin), Thread.currentThread().getName());
return new StatResult(file, tColors, totalNumber);
} I create a fixed thread pool with 6 threads. When I look a the log, I see that some threads stops working or get slower and slower, whereas there is a lot of files to treat.
Is there something I'm missing? where is my mistake?
Thanks for your help, and please, excuse my english.Eric wrote:
I wish I could use an array indexed by the RGB colors, but, sometime, the RGB color is "-1". I think this happen because of the lack of unsigned value in java but I don't how I can get rid of it.
Have you an idea?The one that immediately suggests itself to me is to offset everything by one; but an alternative (and probably better) might be to check the value beforehand. This should help you to find out why and when, and what you could do to fix it.
It also suggests to me that your design is heavily implementation-dependant.
Winston -
Game is getting slower and slower?
Am creating a spaceship game, but my problem is that the movement of the spaceship is getting slower and slower. I the end it completly stops moving! What am I doing wrong?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Raptor extends JFrame implements KeyListener
Graphics2D g;
JLabel raptorL;
Timer loop;
int x=400;
int y=400;
int skudXStart1=0;
int skudYStart1=0;
int skudXSlut1=0;
int skudYSlut1=0;
int skudXStart2=0;
int skudYStart2=0;
int skudXSlut2=0;
int skudYSlut2=0;
boolean right,left,space;
Raptor()
addKeyListener(this);
setBounds(100,50,800,600);
setVisible(true);
public void paint(Graphics g1)
super.paint(g1);
g = (Graphics2D) g1;
g.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
g.drawImage((new ImageIcon("raptorSmall.gif")).getImage(),x,y,this);
g.setColor(Color.red);
g.drawLine(skudXStart1,skudYStart1,skudXSlut1,skudYSlut1);
g.drawLine(skudXStart2,skudYStart2,skudXSlut2,skudYSlut2);
loop = new Timer(10, new ActionListener()
public void actionPerformed(ActionEvent e)
if(right)
x+=1;
repaint();
if(left)
x-=1;
repaint();
if(space)
skudYStart1-=5;
skudYSlut1-=5;
skudYStart2-=5;
skudYSlut2-=5;
repaint();
loop.start();
public void keyPressed(KeyEvent e)
if(e.getKeyCode() == KeyEvent.VK_LEFT)
left=true;
if(e.getKeyCode() == KeyEvent.VK_RIGHT)
right=true;
if(e.getKeyCode() == KeyEvent.VK_SPACE && skudYStart1 <= 0)
System.out.println(skudYStart1);
skudXStart1=x+20;
skudYStart1=y+30;
skudXSlut1=x+20;
skudYSlut1=450;
skudXStart2=x+78;
skudYStart2=y+30;
skudXSlut2=x+78;
skudYSlut2=450;
space=true;
public void keyReleased(KeyEvent e)
if(e.getKeyCode() == KeyEvent.VK_LEFT)
left=false;
if(e.getKeyCode() == KeyEvent.VK_RIGHT)
right=false;
if(e.getKeyCode() == KeyEvent.VK_SPACE)
//space=false;
public void keyTyped(KeyEvent e){}
public static void main(String[] aslan)
new Raptor();
}I have this code now, thx to Rick :-) My problem is that I dont know how I can make a delay in the thread, before the the second spaceship(enemy1) is thrown into the game? How can I do this when my Graphics is created in a render?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.image.*;
class Raptor extends JFrame implements KeyListener
Graphics2D g;
Timer loop;
int x=400;
int y=400;
int skudXStart1=0;
int skudYStart1=0;
int skudXSlut1=0;
int skudYSlut1=0;
int skudXStart2=0;
int skudYStart2=0;
int skudXSlut2=0;
int skudYSlut2=0;
boolean right,left,space;
Image raptorImage = null;
Image enemy1 = null;
int enemy1x = 500;
int enemy1y = -50;
BufferStrategy bs = null;
Rectangle bounds = null;
Raptor()
addKeyListener(this);
setBounds(100,50,800,600);
bounds = getBounds();
setVisible(true);
private void render(Graphics g1)
g = (Graphics2D) g1;
g.clearRect(0,0,(int)bounds.getWidth(),(int)bounds.getHeight());
if(raptorImage == null)
Image tempImage = new ImageIcon("raptorSmall.gif").getImage();
raptorImage = createImage(tempImage.getWidth(null), tempImage.getHeight(null));
Graphics g = raptorImage.getGraphics();
g.drawImage(tempImage,0,0,null);
g.dispose();
g.drawImage(raptorImage,x,y,this);
g.setColor(Color.red);
g.drawLine(skudXStart1,skudYStart1,skudXSlut1,skudYSlut1);
g.drawLine(skudXStart2,skudYStart2,skudXSlut2,skudYSlut2);
if (space)
skudYStart1-=5;
skudYSlut1-=5;
skudYStart2-=5;
skudYSlut2-=5;
if (skudYStart1 <= 0)
space = false;
if (left)
x -= 1;
if (right)
x += 1;
if(enemy1 == null)
Image tempImage2 = new ImageIcon("Enemy1.gif").getImage();
enemy1 = createImage(tempImage2.getWidth(null), tempImage2.getHeight(null));
Graphics g = enemy1.getGraphics();
g.drawImage(tempImage2,0,0,null);
g.dispose();
g.drawImage(enemy1,enemy1x,enemy1y,this);
enemy1x-=1;
enemy1y+=1;
public void run()
while(true)
if (bs == null)
createBufferStrategy(2);
bs = getBufferStrategy();
Graphics g = bs.getDrawGraphics();
render(g);
bs.show();
g.dispose();
public void paint(Graphics g1)
super.paint(g1);
render(g1);
public void keyPressed(KeyEvent e)
if(e.getKeyCode() == KeyEvent.VK_ESCAPE )
System.exit(0);
if(e.getKeyCode() == KeyEvent.VK_LEFT)
left=true;
if(e.getKeyCode() == KeyEvent.VK_RIGHT)
right=true;
if(e.getKeyCode() == KeyEvent.VK_SPACE)
if (skudYStart1 <= 0)
skudXStart1=x+20;
skudYStart1=y+30;
skudXSlut1=x+20;
skudYSlut1=450;
skudXStart2=x+78;
skudYStart2=y+30;
skudXSlut2=x+78;
skudYSlut2=450;
space=true;
public void keyReleased(KeyEvent e)
if(e.getKeyCode() == KeyEvent.VK_LEFT)
left=false;
if(e.getKeyCode() == KeyEvent.VK_RIGHT)
right=false;
if(e.getKeyCode() == KeyEvent.VK_SPACE)
public void keyTyped(KeyEvent e){}
public static void main(String[] aslan)
new Raptor().run();
}
Maybe you are looking for
-
Error Executing Database Query (Encountered [nullstring])
The attached code gives the following error message. I did have nullstrings being submitted as the "notes" and "internal notes," but I removed them in an (unsuccessful) attempt to solve this problem. Can this be fixed? Thanks! quote: Error Executing
-
Adobe Flash Player and pluggin 16.0 r0 constantly stops working
For a couple of days now firefox and adobe flash player/pluggin 16.0 r0 will not function properly at all. If I end up on a site like youtube or other sites with similar functions, I get bombarded repeatedly with this message and can't do anything ab
-
Does someone know information about Company name:TianMei Electronic Trade Co., Ltd Address:Anbao Building No.28 street, quanzhou , FUJian, China Pleas abswer is it legit or not? Does someone have got any experience with that company? Any information
-
The file I'm proofreading is not allowing me access to the Comments and Markup toolbar. The bar itself is "greyed out" and I can't make any of the editing changes to the pdf as I normally would. The only difference I see with this file is the messag
-
Has anyone got the GSM Samsung SGH-T609 to work with iSync, either through the USB cable or Bluetooth? It works fine through Bluetooth File Exchange, and iSync sees the phone, but says "iSync cannot connect to this device". Also, Address Book will le