Creating layout in tcode KOB1

Hi Experts ,
Is it possible to create our own layout(fields to be displayed) in tcode KOB1?
Can we edit the existing layouts?
Thanks in advance.
BR,
Jay

ofcourse you can, please explain what is preventing you from doing it right now or where you experience problems ?
kind regards
arthur

Similar Messages

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Unable to see the logical path and file created in FILE tcode from AL11 and unable to upload the file to this path from front end

Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.

Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan

How to create a z-tcode for a report in FSI3 transaction

hi friends,
i want to create a z tcode for a report in FSI3 transaction, i have copied the program of the report and created a tcode in se93, but some more tabs are getting displayed in selection screen when im executing my Z Tcode, and report is not getting executed. kindly help.
regards,
nagarajan.j

Hi,
follow these steps:
1. enter into transaction SE43 and change any Z area menu (we won't save it anyway)
2. choose to add a new entry
3. in the popup, choose to add a new report
4. select "Drilldown"
5. the application class depends on the area from you are trying to define/launch drilldown reports. In case of transaction FSI3, the appropriate application class is "FBR FI:FIS - Balance sheet, balance sheet key figures
6. then choose the suitable report type. This corresponds to the nodes that you'll see in transaction FSI3
7. finally choose a report, and optionally a variant.
8. you'll return to the screen "Transaction code for reports" (same as in step 4)
9. expand the button to display further options
10. optionally, specify a custom transaction code and/or description
11. accept all popups. This will create the transaction
12. finally, exit and don't save the area menu
I hope this helps. Kind regards,
Alvaro

Creating layout in PDF Based Form to print table content.

Hi ,
I am facing problem in creating the layout of PDF Based Form . I do not need any interactive text but only active table in my context whose data i need to print . What i did was drag the table from data view into the body page and activate . When i run it i only get a table structure but without any data .
Can any one help me or give a pointer to any tutorial for this ?. I have checked in SAPnet for PDF Based Print Form but it somehow skips how to create layout.
With regards,
Saurabh Kumar Pandey

Have a look at help.sap.com:
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/b7/64348655fb46149098d95bdca103d0/content.htm">Interactive Forms based on Adobe Software</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/4c/9cc19e5c874091a99790e540b06f3a/content.htm">Inserting a Table or Loop</a>

Create layout for Team Site

I created simple html file. I opened SPD 2013 and put this file into the All Files/_catalog/masterpage folder.
I opened Design Manager and convert it to a SharePoint master page. Conversion was successful.
In the Design Manager I clicked Edit Page Layouts and created new layout.
The Enterprise Wiki Page Content Type was selected.
I have SharePoint 2013 Team Site.
I published master page and page layout from Master pages and page layouts Gallery.
In the Look and Feel I selected Master page then set my created master page as default.
The master page of Team site was changed to my newly created master page.
I edited the page and clicked Text Layout. There was not my layout in the drop down .
How to create layout for Team site?
I would be very grateful for any help.
bnossov

Hi,
Please check whether enable the SharePoint Server Publishing Infrastructure(Site Collection Feature) feature.
Or check the steps as the links below.
How to: Create a page layout in SharePoint 2013
http://msdn.microsoft.com/library/jj822368.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/10/stage-7-upload-page-layouts-and-create-new-pages-in-a-publishing-site.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Newly created layout profile not showing up in Select Profile window

Dear experts,
Background information - NetWeaver 7.0 SP15
I'm learning customizing KM layout and have created a new layout profile, which is based upon a layout set with a HTML Collection Renderer. However, when I tried to test it by assigning it to a subfolder that I created in BIUserhome folder, I can't find the new profile listed in the Select Profile window. It shows up in selection list, though, if I try to set default layout profile. Can anybody be so kind to enlighten me on this? Would I need to restart the instance in order to see the new profile?
Thank you very much in advance!
Hsiao

Hi Patricio,
Thank you for your reply. My post did not elicit any response until now.
As I could not have the layout profile coming up, I next tried the HTML Collection Renderer with layout sets. When I tried preview a path with the layout set, the layout set was not used as expected due to some error. Instead, the default layout set took over. I have a follow-up post that describes the issue (https://www.sdn.sap.com/irj/sdn/thread?messageID=804745) in case you may have an idea about the cause.
Later these issues kind of went away for reasons I'm not aware of. I haven't gone back to set up another profile again yet. But newly-created layout sets are showing up in the dropdown now.
Thank you for your other advice on using layout sets and layout profiles. I appreciate your input.
Regards
Hsiao

How to create a layout for tcode fbl1n

hi..
i want to know how to create a layout for flbl1n.pls provide me a step by step approach.
regards

Hi,
           Its simple :
          1. Display Report FBL1n.
          2. Select/ deselect coloumns you want with button ' Change Layout ( Ctrl + F8 ) '.
          3. Click Save Layout button( Ctrl + F12 ). Give a new name for layout.
Regards
Srikanth M

Mail send from displayed layout from Tcode F.64

Hi Experts,
My client has a requirement. In tcode F.64 we are getting a output layout of Money Receipt. Now the requirement is that in the displayed layout there should be a customized button clicking on which the layout will be converted to pdf format and will be send through mail to some predefined ids as attachment. Can anyone suggest me on this? Is this possible?
Thanks in advance.
Regards,
Surya
Edited by: suryabasu on Jan 3, 2012 9:46 AM

Hi Madhurao,
Thanks for your reply. So you are suggesting to create a Z-report which will accept a spool request and then it will convert it to pdf and then that pdf will be sent through mail?
Regards,
Surya

Creating layouts in ALV report

Hi all,
I have created a report when a user creates a layout in the report it should save the variant(layout) and display in the selection-screen with alv_variant and search help.Its working properly.
But I have to create different layouts like the following:
Layout with sort and subtotals,
layout with sort and filter conditions like that.
Can anybody help me regarding this matter.
with regards
chandu

Sai,
Here is a little sample program which shows you how to recall saved ALV Layouts. It requires the user to run the report, create their own variants, and this program allwos them to recall it from the selection screen.
You can create gobal layouts (for your sorts, and totals) which canbe accessed by any user.
Hope this helps.
Cheers,
Pat.
*& Report ZPATS_ALV *
REPORT zpats_alv .
TABLES: kna1.
TYPE-POOLS: kkblo.
* structures *
DATA: st_fieldcat TYPE slis_fieldcat_alv.
DATA: st_variant1 LIKE disvariant.
DATA: st_variant2 LIKE disvariant.
* internal tables *
DATA: BEGIN OF tbl_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
stras LIKE kna1-stras,
telf1 LIKE kna1-telf1,
ort01 LIKE kna1-ort01,
pstlz LIKE kna1-pstlz,
sortl LIKE kna1-sortl,
ernam LIKE kna1-ernam,
spras LIKE kna1-spras,
END OF tbl_kna1.
DATA: tbl_fieldcat TYPE slis_t_fieldcat_alv.
* global variables *
DATA: fieldname(30) TYPE c.
DATA: variant_exit(1) TYPE c,
 variant_save(1) TYPE c,
 variant_def(1) TYPE c.
* Seelction Screen
PARAMETERS: p_vari LIKE disvariant-variant.
* Initialization Event
INITIALIZATION.
PERFORM variant_init USING st_variant1.
st_variant2 = st_variant1.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 i_save = 'A'
 CHANGING
 cs_variant = st_variant2
 EXCEPTIONS
 not_found = 2.
IF sy-subrc = 0.
 p_vari = st_variant2-variant.
ENDIF.
* At Selection Screen On Value Request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
* Start of Selection Event
START-OF-SELECTION.
SELECT kunnr name1 stras telf1 ort01 pstlz sortl ernam spras
 INTO CORRESPONDING FIELDS OF TABLE tbl_kna1
 FROM kna1.
* End of Selection Event
END-OF-SELECTION.
PERFORM get_fieldcat.
PERFORM create_report.
*& Form get_fieldcat
* text
* --> p1 text
* <-- p2 text
FORM get_fieldcat.
PERFORM write_fieldcat USING 'KUNNR' 'X' 1.
PERFORM write_fieldcat USING 'NAME1' 'X' 2.
PERFORM write_fieldcat USING 'STRAS' ' ' 3.
PERFORM write_fieldcat USING 'TELF1' ' ' 4.
PERFORM write_fieldcat USING 'ORT01' ' ' 5.
PERFORM write_fieldcat USING 'PSTLZ' ' ' 6.
PERFORM write_fieldcat USING 'SORTL' ' ' 7.
PERFORM write_fieldcat USING 'ERNAM' ' ' 8.
PERFORM write_fieldcat USING 'SPRAS' ' ' 9.
ENDFORM. " get_fieldcat
*& Form write_fieldcat
* text
* -->P_0060 text
* -->P_0061 text
* -->P_0062 text
* -->P_0063 text
* -->P_1 text
FORM write_fieldcat USING name
 key
 pos.
st_fieldcat-fieldname = name.
st_fieldcat-tabname = 'TBL_KNA1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-key = key.
st_fieldcat-col_pos = pos.
IF name = 'PSTLZ'.
 st_fieldcat-row_pos = '2'.
ENDIF.
APPEND st_fieldcat TO tbl_fieldcat.
CLEAR st_fieldcat.
ENDFORM. " write_fieldcat
*& Form create_report
* text
* --> p1 text
* <-- p2 text
FORM create_report.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_interface_check = ' '
 i_callback_program = 'ZPATS_ALV'
 i_callback_user_command = 'USER_COMMANDS'
 it_fieldcat = tbl_fieldcat
 i_default = 'X'
 i_save = 'A'
 is_variant = st_variant2
 TABLES
 t_outtab = tbl_kna1
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_report
*& Form USER_COMMANDS
* text
* --> p1 text
* <-- p2 text
FORM user_commands USING syst-ucomm LIKE syst-ucomm
 selfield TYPE slis_selfield.
CASE syst-ucomm.
 WHEN '&IC1'.
 READ TABLE tbl_kna1 INDEX selfield-tabindex.
 SET PARAMETER ID 'KUN' FIELD tbl_kna1-kunnr.
 CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
ENDCASE.
ENDFORM. " USER_COMMANDS
*& Form VARIANT_INIT
FORM variant_init USING g_variant LIKE disvariant.
* Initialise the Variant Structure
CLEAR g_variant.
g_variant-report = sy-repid.
ENDFORM. " VARIANT_INIT
*& Form f4_for_variant
FORM f4_for_variant.
CLEAR st_variant1.
st_variant1-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 is_variant = st_variant1
 i_save = 'A'
 IMPORTING
 e_exit = variant_exit
 es_variant = st_variant2.
IF variant_exit = space.
 p_vari = st_variant2-variant.
ENDIF.
ENDFORM. " f4_for_variant

Error while creating form using tcode HRFORMS.

Hi All,
I am trying to create a payslip in tcode HRFORMS. while generating the program I am getting an error message stating "Generated program /1pyxxfo/znr_pay_stmt_prnt contains syntax errors".
Has anybody faced these type of error. Do I need to do any config set ups before using tcode HRFORMS? Please help me in this regard.
Thanks,
V.Nagaraju

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Problem about creating bp in tcode: cic0

Hi all,
I have developed function module that check bp role before saving new bp
and add in tcode BUS7>DCHCK
I create new bp in tcode bp, it works. I can create new bp (person organization) by selecting role before saving.
And if I create new bp but do not select role when click save button it will show error message that I write in function module.
If I create new bp in tcode cic0, it does not work. When I click button create new bp in cic0, it link to Create Organization screen. Then I want to create new bp(person) and click button create new person, suddenly it will show error message that I write in fm although I do not click save button.
The function module that i developed is: Z_CRM_BUPA_ROLECHECK
FUNCTION Z_CRM_BUPA_ROLECHECK.
""Local interface:
DATA:
 lt_role LIKE bus0rltyp OCCURS 0,
 lw_role TYPE bus0rltyp,
 lv_partner TYPE but000-partner,
 flag_x TYPE c,
 lc_data TYPE bussdi3-data.
DATA: BEGIN OF t_role OCCURS 0,
 rltyp TYPE bu_rltyp,
 END OF t_role.
CALL FUNCTION 'BUP_BUPA_BUT000_GET'
 IMPORTING
 e_data = lc_data.
Get BP No.
MOVE lc_data+3(10) TO lv_partner.
SELECT rltyp
 FROM but100
 INTO TABLE t_role
 WHERE partner = lv_partner.
READ TABLE t_role INDEX 1.
IF sy-subrc <> 0.
Determine Role
 CALL FUNCTION 'BUS_PARAMETERS_ISSTA_GET'
 TABLES
 t_rltyp = lt_role.
 READ TABLE lt_role INTO lw_role INDEX 1.
 IF lw_role-rltyp = '000000'.
 MESSAGE e000(zbp).
 EXIT.
 ENDIF.
ENDIF.
ENDFUNCTION.
I would like to know how to solve this issue. Are there any bugs in this FM or I have to config anythings else?
Thank you

Hi,
The problem here is that DCHCK function module is called not only on save for also when you click on check icon in BP transaction. In CIC0 transaction, this check must be called implicitly. What you need to do is to find out some way that you check whether the current action is of save or check and then only raise the error. I tried finding some way to determine the action but wasn't successful.
Thanks and warm regards,
Smita.

How to create layout template pages?

I'm attempting to layout pages of text in Page for an eBook using the Layout mode and linked text boxes.
I think what I want to do (and I'm open to a better way of doing this) is to create a bunch of pages all with the same layout. While I can insert a new page from the supplied templates easily enough, none of them suit my needs, so I want to create my own Template document with its own subset of pages. Or at least, add my own Page to another template. The aim is to be able to click Insert/Page/MyPage for each new page, so that each one has - ideally - a new linked text box that the text will flow into automatically. Or less ideally, to have a load of pages, each with their own text box, that I can link.
However I can find no way to do either of these things with a custom layout page I've created. Is it just not possible in Pages, or am I missing something? All advice/links etc. gratefull received.
thanks
Matt

From my point of you, trying to teach you that the first thing to do is to search carefully in the user guide what you didn't is the best way to help. But it seems that you are unable to understand that.
You just understand: the wanted info is in page #wx of resource ABC.
For sure, trying to teach you that take more time that bottle-feeding you
Searching with the keyword "template" bring this page quite immediately :
Searching for "linked text box" brought this one quite immediately too.
It required more time to upload the screenshots here than to reach the pages but my rules are given by Confucius :
Quand on désire savoir, on interroge. Quand on veut être capable, on étudie.
Revoyez sans arrêt ce que vous savez déjà. Etudiez sans cesse du nouveau. Alors vous deviendrez un Maître.
When we wish to know, we question. When we want to be capable, we study.
See again(Revise) non-stop what you already know. Study ceaselessly of the new. Then you will become Master(Teacher).
Quand un homme a faim, mieux vaut lui apprendre à pêcher que de lui donner un poisson.
When a man is hungry, it is better to teach to him(her) to fish that to give him(her) a fish.
Quand vous plantez une graine une fois, vous obtenez une seule et unique récolte. Quand vous instruisez les gens, vous en obtenez cent.
When you plant a seed once, you obtain the only harvest. When you educate people, you obtain one hundred from it.
L'homme supérieur ne demande rien qu'à lui-même ; l'homme vulgaire et sans mérite demande tout aux autres.
The upper man asks only himself(itself); the vulgar man and without merit asks for everything the others.
The English version is the result of an automatic translation so I'm not sure that it's a good one.
Yvan KOENIG (VALLAURIS, France) lundi 11 juillet 2011 18:29:57
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

SAPGUI 7.10 Cannot view layout in tcode SE80 and COOis

Hi,
I am facing some problem with SAP GUI 7.10 in Linux (PCLinuxOS 2007 and in SimplyMepis 6.5).
When I use tcode COOIS, after executing this tcode, I cannot select all icon " Select Layout", "Sorting Ascending and Decending", "Export". There is no respon.
This problem also occured when I execute tcode SE80 > Screens > Layout.
In tcode SE80, I got a message after I click Layout button "Graphical Layout Editor not available. Continue with alphanumeric editor".
Please give me suggestion.
Thanks,
Dedy.W

Dear Rolf Martin,
Thanks for your reply.
Is this the support message you are asking for? or I should make a customer message in http://service.sap.com. Pardon me if I am wrong.
Step for COOIS :
1. Enter tcode COOIS
2. In List field > select Order Headers
3. In Profile field > select Standard profile
4. In Production plant field > input plant
5. On Selection Group of Absolute dates at header level > input Basic start date (one month)
6. Execute
7. The out put is : Order Information System: Detail List of Order Headers > select icon Select Layout
Best Regards,
Dedy.W

Miss created DIR in Tcode CV02N, CV03N.

Hi Gurus
I've created a DIR in Tcode CV01N.
When I press F4 in CV02N, I can't find this DIR. But I can copy Document Number of this to CV02N and I can view/change it. Or I can find it in Tcode CV04N.
I use a new Document Type and it is transferred from another server by request transferring.
With standard Document Type like FOL, I'm able to find DIRs.
Perhaps have something wrong in the configuration. But I compared it to some standard Document Type, nothing strange
Best Regards
An NLP

I forgot it a long time. When I checked, it worked. So strange... I don't know the reason of this case.
An NLP

Creating layout in tcode KOB1

Similar Messages

Maybe you are looking for