Creating Lines in cs4

I'm creating a criminal line out background . I'm using the line tool to creat the lines. I have renamed it in the path tool   created a cliiping mask but when I flatten the image once finished the lines  dissappear. I have also tried creating a new layer naming it putting it between my copied layer and background but once again when flattening the image it  dosent keep the lines. I'm using CS4  

As I wrote what you see when the shape layer is selected is the shape layer's path which is not part of the image. When you select an other layer you see the shape layer on top is all white its fill color turn off the visibility of layer 1 and the background layer leave one of these selected you will see the pixels in the shape layer if there are any. They will be white so you may want to add a layer below it and fill it with black and have it selected so you can see your white shape layer better.

Similar Messages

  • Change of additional acct. assignment in automatically created line items

    Hello,
    How can we change the additional account assignment of automatically created line items in transaction MIRO. In my case the tax line item is created automatically in MIRO.
    I am able to change the account assignment of consumption line item. But not Tax line item.
    Best Regards,
    Tapan

    But FBZP is for APP not for Tax line item. Is it possible to change the additional account assignement (from cost center to internal order) in tax line item in MIRO.
    Best Regards,
    Tapan

  • PDF (created in Indesign CS4) separates in CMYK, in stead of PMS

    I have sent a PDF, created in Indesign CS4, to the printer. I need the design to be printed in PMS colors, but the printer says the PDF color separates in CMYK, not PMS colors.
    I'm at my wits end trying to find where I went wrong (I should add I'm a beginner at all this). I need help...
    Here's what I did:
    I have changed the colors in a CMYK based design of a business card to PMS colors. I have changed the colors of an Illustrator file that is used in the design to PMS colors as well.
    When I look at the separations preview it looks fine, only PMS colors.
    I then created a PDF, using the [High Quality Print] Adobe PDF preset. In Output Color Conversion is set to 'No Color Conversion'. In the Ink Manager 'All spots to process' is not checked. CMYK inks are visible in the Ink Manager, but so are the Pantone Inks I used.
    I noticed one strange thing, the swatch options for Pantone Process Cyan C are different thatn those in other PMS colors, the Colortype is 'spot' but the Color Mode is CMYK, greyed out so that I can't change it to Pantone Solid Coated. Even weirder, I can't delete that strange swatch. I tried adding the pantone colors to my swatches again, in a different file, I added Pantone Cyan C and it looked fine, but when I reopened the swatch options it was strange again.

    Yes, I have added cropmarks and page info to the pdf.
    I checked the separations in Acrobat Pro with a friend. Both Pantone colors and CMYK show up. When I disable the CMYK, nothing of the design disappears (cropmarks and page info don't disappear either, they seem to be in both Pantone and CMYK).
    I saved a new pdf, without crops and page info, and CMYK still shows up in the separations.
    I'll contact the printer tomorrow, I'm pretty sure he should be able to use the file I sent him.
    Thank you all for your help!

  • How do I get Bridge CS6 to recognize collections created in Bridge CS4?

    I just downloaded Photoshop CS6 beta. When I opened Bridge CS6, my collections (created in Bridge CS4) were not visible. Is there a way to import the collections into CS6?

    Hello, on collections can be found on:
    MAC: user/library/application/support/Adobe/Bridge (CS4 - CS5)/collections
    WIN: it should be [osdisk]:\Users\[username]\AppData\Roaming\Adobe\Bridge CS4 -5)\collections
    You could try to import them to the same folder for CS6.

  • Tax Cide Field as editable for Automatically created Line Item

    Hi
    How can we make the tax code editable for automatically created line item, when an FI Document is simulated.
    Thanks & Regards
    Sanil K Bhandari

    Hi
    I want to edit the line item which has been created by the system, when the document is in simulation mode. The entry has not been posted yet.
    Thanks & Regards
    Sanil K Bhandari

  • Creating lines in an applet

    Hi,
    I was wondering how would I use the mouse to create lines between two vertices (also drawn by the mouse) within a Java applet. I need to be able to click on two different vertices and this should result in a line being drawn between them.
    I use the mouseDown handler and need to somehow get the x and y positions when the mouse is clicked so I can draw a line between two points. I have created this in a JFrame but use the mousePressed handler and hence can type
    xPos = e.getX() and yPos = e.getY(). Is there any way of doing the same thing using mouseDown.
    Here is the code
    public boolean mouseDown(Event e, int x, int y)
    xPos = e.x;
    yPos = e.y;
    int i;
    if (inter < max_number_of_vertices) {//draws the vertices
    inter++;
    circle_points[inter] = x;
    circle_points2[inter] = y;
    repaint();
    else {
    if (first_time == 0) {
    JOptionPane.showMessageDialog(null, "now enter your edges");
    first_time = 1;
    else if (click_Second_boolean == true) {
    second_click(); // the code for this is below
    testing++;
    else {
    first_click(); //the code for this below
    number_of_lines++;
    return true;
    ///this is the code for the methods first click and second click.
    public void first_click()
    closest_point = 100000;
    for(int i =0; i<max_number_of_vertices;i++)
    int compare1a = circle_points;
    int compare1b = circle_points2[i];
    double compare1_phy = Math.sqrt(((compare1a - xPos) *( compare1a - xPos ))+ ((compare1b -yPos ) *( compare1b -yPos)));
    if(compare1_phy < closest_point)
    closest_point = compare1_phy;
    closest_point_PT1 = i;
    lines_array[0][testing] = circle_points[closest_point_PT1];
    click_Second_boolean = true;
    void second_click()
    closest_point =10000;
    for(int i =0; i<max_number_of_vertices;i++)
    int compare2a = circle_points[i];
    int compare2b = circle_points2[i];
    double compare2_phy = Math.sqrt(((compare2a - xPos) *( compare2a - xPos ))+ ((compare2b -yPos ) *( compare2b -yPos)));
    if(compare2_phy < closest_point)
    closest_point = compare2_phy;
    closest_point_PT2 = i;
    lines_array[1][testing] = circle_points[closest_point_PT2];
    click_Second_boolean = false;
    first_matrix[closest_point_PT1][closest_point_PT2] = true;
    repaint();
    I then need to be able to use this as a matrix to do calculatoins on. Any help on this matter would be good.
    Thanks
    KP

    No matter what mouse event you use, you should be able to get the X,Y of the hit. You can then feed that into your app and draw a line between the two.

  • Creating Line Graphs in Portal

    Is it possible to create line graphs in Portal, I can create the bar graphs but they dont suit my needs.
    If not in Portal, are there any Oracle products that can create line graphs on data in a database?
    Thanks

    What about Oracle Graphics?
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Elliott Hamm:
    Is it possible to create line graphs in Portal, I can create the bar graphs but they dont suit my needs.
    If not in Portal, are there any Oracle products that can create line graphs on data in a database?
    Thanks<HR></BLOCKQUOTE>
    null

  • How to create line in smart form

    dear all,
            i hv to create lines in smartform.
    BOX XPOS '0' MM YPOS '6' MM HEIGHT '0' MM WIDTH '190' MM FRAME 1 PT
    by using above statement i can create line in SAPSCRIPT.
    is there any similar statement in smartform to create lines
    if So plz send me a code.
    regards
    Vinod.

    create window and provide these parameters  in the output options to get the line. and  in  line  select check box line with                                                                               
    Left margin          0.00      CH    Width           80.00       CH   
      Upper margin     12.50      LN    Height             0.05       LN                                                                               
    line
       check the box  line with                                                                               
    Gray value       0   %     
       Width                     1.00       TW                       (0% = not filled)          
       vertical spacing       0.00       CM                                
       horizontal spacing   0.00       CM

  • Need to Create Line Items through CRM_ORDER_MAINTAIN

    Hi all,
    I need code for creating Line Items with product and Quantity through CRM_ORDER_MAINTAIN,
    I am able to create header and the partner data through CRM_ORDER_MAINTAIN.
    Suggest the solution.

    Since you have already used the function module CRM_ORDER_MAINTAIN for partners, it shouldn't be difficult for you to use it for more sets of data. Well, the idea is to know what is required to be filled in the input fields and keys. There is a report program CRM_ORDER_READ. Use this with an existing transaction that contains the type of data you want to know about. You will get lot of insight into the data required to for any set of data.
    Also, see this thread for some sample code
    Set item, partner data of sales order using BAPI_BUSPROCESSND_CREATEMULTI

  • Automatically created line items will be deleted-Withholding tax

    Dear Experts,
    Please let me know the reason for generating message as Automatically created line items will be deleted while simulating.On second simulation onwards,TDS entries is deleting and the same is disappearing on posting.

    Hi,
    You might be getting this error while do clearing of vendor who is liable for withholding tax.
    You are getting this error because you have to do payment of Withholding tax.
    If this is not the scenario please revert with exactly when you are getting said error.
    Regards,
    Tejas

  • When we create Line item dimension Like before implementation or  productio

    Hi BW experts ,
    i have doubt Regarding the creation of Line item Dimension
    When we creating the lineitem dimension means After Implementation or Before implementation plz Give the Exact answer .
    if u give the exact answer i will assign the moer points
    Regards
    prakash.v
    [email protected]

    Hi Prakash,
                     You can create the line dimension before implenmentation and after implementation.. if u know the size of data u can create at initial stage otherwise go RSRV tcode u can know the size and can create the line dimension, otherwise if dimension table is bigger than fact table u can create line dimension.

  • KKA3 "Do not create line IDs of 'Settlement' cat. when defining assignmnt"

    Hi gurus,
    when i am runing KKA3 getting message "Do not create line IDs of 'Settlement' cat. when defining assignmnt rules". can any one guid me to come out from this issue.
    Regards,
    Ram

    Hi Ram,
    I am sorry, but as I wrote this might be not just the technical issue when you can simply change from category A to category N.  In OKG4 you classify the line ID to one of the SAP predefined categories, while in OKG5 you define the sourse for the line ID.  Both settings require understanding of business requirements and knowledge of many other things, not just Result Analysis, but also cost element coding rules, etc.  Try to get in touch with functional guys who are the design owners.
    Paulo

  • How to create line indesign sdk?

    hi,
       I had created line but i cannot able to set length for this line,pls help me.
    here my code is,
    UIDRef lineRef=Utils<IPathUtils>()->CreateLineSpline
    (spreadLayerUIDRef,points,INewPageItemCmdData::kDefaultGraphicAttributes,kTrue,Transform:: InnerCoordinates());
    thanks,
    vijay.

    Hi,
    If the requirement is on a small scale and u have only a few no of users (To Restrict) and only a few forms, what i did was
    1.Get the curently logged in user.
    2.Check if he is a restricted user.
    3.Check if the form opened is a restricted form for the user.
    4.Then on the form load or on the ITEM (UID 1) make bubble event to FALSE and show msg that the  user is not supposed to make the changes.
    This is what i did as mine was limited to only some forms...:)
    Hope this helps u..
    Vasu Natari.

  • How to create line chart

    Hii Experts,
    How to create line chart?
    I want to  prepaire a line chart in a report. i have 1 table. In a table have 2 fields. chart is created in these 2 field refrence how It's possible?
    Thanx in Advance
    Regards
    Vshal

    I found it very easy to produce a line chart in a window container using FM GFW_PRES_SHOW.  In my case this produces a basic line graph with three lines across 15 time periods.
    See transaction GRAL for various chart types...they're relatively easy to produce...  I picked DEMO_GFW_PRES_SHOW report program from GRAL as my example for how to produce a simple line chart very quickly.

  • White boarders around artboard when creating pdf in CS4

    Hi,
    have been trying to find solution for this issue for 4 hours now and im loosing my mind:)) ... so decided to ask some help from you guys.
    Problem: im trying to create pdf file with black background in Illustrator cs4 and white thin boarders keep appearing to the right and bottom of the page. I have streched the background image so that its bigger than the artboard but white lines are still there when pdf is opened?!? I guess there is extremeley easy solution for this (kind a "you forgot to tick the box from x menu") but i just cant figure out .... so all the help is most wellcome!!!
    Thank you in advance!
    Jimi

    @ Jacob --- you're half correct, in that it's a small bug, or smoothing artifact in the Preview application from Apple.
    White boarders go away when you uncheck "Smooth text and line art" in Preview Preferences, under the PDF tab. Since that makes everything very pixelated, I don't recommend keeping that setting on.
    Instead, consider installing Adobe Reader or using Acrobat Pro, where incidentily, the very same phenomonen can occur. In Acrobat Pro, you can also toggle "Smoothing" in the Preferences, Page Display dialog.
    TIP: Preview works best with RGB PDFs, whereas if you are doing print production work, I would suggest using either Acrobat Reader, or Pro which is my preference because of the soft-proofing and print production tools.

Maybe you are looking for