Creating Map IDs using HTM File Name

Is it possible to create Map IDs using the File name of the HTM, instead of its Topic Title?

While Generating Map IDs, we get an ID along with a Map # for each HTM in the CSH.
For Example, I have a HTM in my CSH with the following Details:
Topic Title - Access Masks
File Name - admpr00001.htm
Now when I create a Map ID for this page. I can customise the Map ID by setting any/all of the three options: - 'Prefix Map IDs with', 'Make Uppercase' and 'Start Numbering with'. But the Map ID is generated only based on the Topic Title.
Like - ebACCESS_MASKS 1000 where, eb is the set prefix.
Is it possible for me to create a MAP ID using the File Name. In this case, as ebadmpr00001 1000?
Hope I am clear .

Similar Messages

URGENT: How to create Map IDs

I am using RH7, have inherited a help project in which all topics have been assigned map IDs. I have created several new topics (at the root level) and do not know how to create map IDs for the new topics. I need step-by-step help on how to create IDs without disrupting the current IDs.

Thanks William. I'm all set now.
Date: Tue, 18 Aug 2009 08:47:58 -0600
From: [email protected]
To: [email protected]
Subject: URGENT: How to create Map IDs
Hi,
Start by reading the article on Peter's site: http://www.grainge.org/pages/authoring/calling_webhelp/using_map_ids.htm
If you have any questions after that, just post back. You'll be able to make your question more specific.
Greet,
Willam
>

How do I get files from multiple DVDs that are using thesame file names?

How do I get files from multiple DVDs that are using thesame file names? Message says "file already exists in catalog"
Message was edited by: marcr56

marcr56
I am viewing your question from different perspective, that is, the issue that you face when you are ripping VOBs from a second DVD-VIDEO on DVD disc using Premiere Elements,
It is best to give the Premiere Elements version and computer operating system that it is running on. In the absence of that, I will generalize.
Assuming that you are using
Premiere Elements 12
Add Media
"DVD Camera or Computer Drive"
Video Importer
Typically the Video Importer Save In: is C:\Users\Owner\Videos
Each of your DVD discs is going to have the same names for the ripped VOBs (VTS_01_1.VOB and so on depending on the duration of the movie). Consequently, after the ripping of the first DVD's VOBs and their save to Videos, you will end up with that "files already existing..." block for the ripping of the VOBs from the second DVD.
The answer is, for each DVD disc VOB ripping, to plan ahead and create and set for different folders in Videos in the Save In field of the Video Importer.
Please review and then let us know if that works for you. Please do not hesitate to ask if you need clarification on anything that I have written.
Thank you.
ATR.

Search using partial file name?

I know this issue has been addressed before, but I haven't found a satisfactory answer.
I use the Search field in the toolbar to search for files on my external drive. That external drive contains a file named "housefly.psd." When I search for "house" using the File Name filter and with columns set to Kind, all the Photoshop files that begin with "house" appear at the top of the window, including the file I'm searching for.
But if I search for "fly," the "housefly.psd" file doesn't appear in the list at all, although files containing the word "fly" with a space before the word show up in the list (e.g. - "big fly.psd").
Users aren't always going to remember the initial characters in a file name they want to find. So how do I find the file if I only remember some of the internal characters?
Thanks,
Andy
iMac, OS 10.6.8

Andy Tubbesing wrote:
if I search for "fly," the "housefly.psd" file doesn't appear in the list at all, although files containing the word "fly" with a space before the word show up in the list (e.g. - "big fly.psd").
Yeah, isn't Spotlight great?! Give this example to all the experts who gush about Spotlight.
What you see is how Spotlight was designed to work -- at least for hoi polloi like us. The query looks for words, not strings. "Fly" is one word, "big fly" is two words, but "housefly" is one word. It contains the string "fly", but not the word "fly". Now, if you had had the foresight and forethought to name your file "HouseFly", then probably Spotlight would have found it, "Fly", unlike "fly" being, by the rules of the Apple wallahs, a word, not a string. Is that all? No, of course not, that would have been too simple. Spotlight also has hidden somewhere a private list of exceptions. So "books" in "Audiobooks" is always a word, no matter how capitalised; but in "Cookbooks" it's just a mere string, and hence not worthy of notice.
How do you get around this (without using Terminal)?
(1) One way is to construct a query, as already suggested, with the Filename and Contains. But, beware! if you're searching in Finder, and you've already entered a string in the Spotlight search field on the toolbar, the query constructed thus will be restricted to the hits of the query already in the search field. So, if you've enter "fly" in the window toolbar search field, and then construct a Filename Contains "fly" query, you'll find nothing, because any subset of the ∅ (empty set) is also empty. This restriction applies to any query thus constructed.
(2) If you are a real, hair-chested, red-blooded Mac user, you don't use namby-pamby Filename queries. You go straight for the jugular. In the pop-up menu, instead of "Filename", choose "Other...". Then scroll through the interminable list to "Raw Query" and enable it. Then type in the Raw Query search box
kMDItemFSName == *fly*
Note 1: "*fly*", not "*fly", because the Item's File System Name is "housefly.psd".
Note 2: You can use the keyword "name" in the window toolbar Spotlight search field, thus
name:housefly
However, this one doesn't take wildcards.
(3) If you happen to be just a normal person, who uses a computer to be productive and not to exercise one's fingers by typing lengthy and abstruse keywords (or as a Rorschach test to have fun divining the inscrutable minds of Apple engineers), then my suggestion is to give Spotlight the widest possible berth and use something else. I suggest Find File by John R Chang, Find Any File by Thomas Tempelmann, and EasyFind by Christian Grünenberg.

Automatically using a file name as a caption in Adobe Photoshop Elements 8

Hello!
I am trying to import a group of photos that have file names which describe the photo. Is there a way for PSE to automatically caption imported images using the file name as a caption?

Buy PSE9 or wait another month or two and buy PSE10 when it comes out.

Unable to create sample schema using response file

Installed oracle 11g r1 on Linux server using response file (silent mode). I wanted to install the sample schema for testing so I updated the sample_schemas section in $ORACLE_HOME/assistants/dbca/templates/dbcreate.dbc
<option name="SAMPLE_SCHEMA" value="true">
<tablespace id="USERS"/>
</option>
After the installation I noticed sample schemas HR, SH were not created.
-     Do we have to manually create the sample schemas by running the individual scripts?
-     Also could not find the master script mksample.sql in the $ORACLE_HOME/demo/schema directory.
Please let me know if I am missing any parameter in dbcreate.dbc.
Thank you,

user504183 wrote:
Installed oracle 11g r1 on Linux server using response file (silent mode). I wanted to install the sample schema for testing so I updated the sample_schemas section in $ORACLE_HOME/assistants/dbca/templates/dbcreate.dbc
<option name="SAMPLE_SCHEMA" value="true">
<tablespace id="USERS"/>
</option>
After the installation I noticed sample schemas HR, SH were not created.
-     Do we have to manually create the sample schemas by running the individual scripts?
-     Also could not find the master script mksample.sql in the $ORACLE_HOME/demo/schema directory.
Please let me know if I am missing any parameter in dbcreate.dbc.
Thank you,You can't install manually the sample schemas since they come in a "pluggable tablespace" Examples which is automatically appended to your database by DBCA. If you would miss choosing the option for the same, you would need to get them created through the Examples Media CD and follow the instructions given here.
http://download.oracle.com/docs/cd/B28359_01/server.111/b28328/installation.htm#I4367
HTH
Aman....

How to get the filename in mapping when using sender File adapter?

hi Experts,
   I have scenario where XI reads the input file using Sender file adapter.
   The file name is configured in the communication channel.
   In my message mapping it is possible to read this file name?
Thanks
gopal

Hi Gpoal,
Use Dynamic Configuration - /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Geetha

Infoview creating non-sensical bookmarks and file names

Thank you for any help or suggestions!
I am using Crystal Reports 2008, the CMC repository, and InfoView. I am producing PDF reports, many with bookmarks based on the group tree.
I have found that when I run my report off my workstation, all is fine, but when I run the same report out of InfoView, the top level bookmark is a string of nonsensical numbers and characters.
Also, when emailing the report via the schedule option in InfoView, a similar non-sensical name is created.
Is there a way for me to ensure that this top level bookmark/file name something readable, perhaps the name of the report?
Thank you for your help!

To fix your locales, see http://wiki.archlinux.org/index.php/Configuring_locales -- in specific, you'll need to uncomment the en_US.utf8 locale at least, since that's the one that's specified in your rc.conf

Save each page of a multi-page document as a separate file using spawned file names with javascript

Hello
We are currently changing our hard-copy personnel files and converting them to pdf files. We have scanned the entire file into one multi-page document.
I am wanting to save each page (or groups of pages) as separate files.
In order to facilitate this, I have duplicated field names--such as FirstName, LastName, EmpNo on each page. This information should be static for the entire file.
However--I also need information that will change for each individual "page" or document--such as TypeOfDoc, Date, etc. I have used the Spawn fields using the overlay method on each of the pages in the document. Then I went in and filled in the information for each page of the document--such as TypeOfDoc, DateOfDoc.
Now I want to save each page of the document as a separate file using the field names as the file name.
I first created an action that would split all the pages into separate files and save them into a folder.
Then I want to save each file as a specific file name based on the information in the fields.
My problem is obtaining the name of the spawned field name. The rest of the field names I am not having a problem with.
This is what I have so far to name the file.
// Get the field value
var oPage = this.pageNum;
var fn = getField("P" + oPage + ".TEMPLATE.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
// Save the file
myTrustedSpecialTaskFunc(this, fp);
This code is also accompanied with folder level scripts.
My problem is obtaining the name of the spawned fields using javascript. Each document has several pages--so I would like to obtain the field name through script.
I receive the following error.
TypeError: getField("P" + oPage + ".TEMPLATE.DATE") is null
I think this is due to the fact that I have extracted all the pages as individual files.
If I were to do the above, but not extract the pages first--I do not know how to just save one page at a time.
Please help. This is a massive project, and if we have to save each file individually, it will take a lot of time.
I am a beginner, so any assistance is appreciated.
Thank you

I am not understanding exactly where to put the curly brackets. I have tried two different ways, and still get the same error.
This is one way
var oPage = this.pageNum;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
for (var i = 0; i < this.numPages; i++)
var fn = getField("P" + oPage + ".template.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
{this.extractPages({
nStart: i,
cPath : fldr + fn + ".pdf"
The other is this
var oPage = this.pageNum;
// Specify the folder
var fldr = "/n/Personnel/ScannedDocuments/NAMEDPAAS/";
// Determine the full path
var fp = fldr + fn +".pdf";
for (var i = 0; i < this.numPages; i++)
var fn = getField("P" + oPage + ".template.DateOfDoc").valueAsString + getField("FirstName").valueAsString + "-" + getField("LastName").valueAsString;
this.extractPages({
nStart: i,
cPath : fldr + fn + ".pdf"
Thank you for your help.

Script to create directory based on current file name and then save the file in that directory

Hi all,
I have a need save all my projects in a directory using the name of the main image I am working on.
Manually these are the steps I used:
Save As.
Copy ( press command-c <== the filename is highlighted by default so all I have to do is )
New Folder ( press the new folder button. Brings up a dialog box)
Paste ( press command-v. <== Pastes the file name into the "New Folder" dialog box.)
Save ( press thre save button. Saves the files into the new folder )
Save As.
Change format to JPG
Save
Change image quality to 12
I want to assign these actions to a key
Recording these steps and playing them back does not give me the results I need, snce the original name is hard-coded in the actionlist that was recorded
What should I be doing instead ?
Thanks in advance !

You don’t mention which format the original file is (and figuring that and its current settings out seems too much of a hassle to me) so this would only save the jpgs into the folder (and create one if it does not exist).
If you want to give it a try, paste the following text into a new file in ExtendScript Toolkit (part of Photoshop’s installation, Applications/Utilities/Adobe Utilities/ExtendScript Toolkit CS4 or /Applications/Utilities/Adobe Utilities-CS5/ExtendScript Toolkit CS5) and save it as a jsx-file into Photoshop’s Presets/Scripts-folder.
After restarting Photoshop the Script should be available under File > Scripts and can be assigned a Keyboard Shortcut directly, recorded into an Action, (in CS4 and CS5) be used in a Configurator-Panel or started from ExtendScript Toolkit directly.
// saves jpg into folder of file’s name next to file;
// be advised: this overwrites existing jpgs of the same name without prompting;
// thanks to xbytor;
// 2012, use it at your own risk;
#target photoshop;
if (app.documents.length > 0) {
var thedoc = app.activeDocument;
// getting the name and location;
var docName = thedoc.name;
if (docName.indexOf(".") != -1) {var basename = docName.match(/(.*)\.[^\.]+$/)[1]}
else {var basename = docName};
// getting the location, if unsaved save to desktop;
try {var docPath = thedoc.path}
catch (e) {var docPath = "~/Desktop"};
// create folder if it does not exist;
var folderString = docPath+"/"+basename;
if (Folder(folderString).exists == false) {new Folder(folderString).create()};
// jpg options;
var jpegOptions = new JPEGSaveOptions();
jpegOptions.quality = 12;
jpegOptions.embedColorProfile = true;
jpegOptions.matte = MatteType.NONE;
//save jpg as a copy:
thedoc.saveAs((new File(folderString+"/"+basename+".jpg")),jpegOptions,true);

Create an IDOC using Txt file

Hello All,
I have recived an IDOC DATA in TEXT file.
would u please help me how to create an idoc using the above text file.
Kind Regards,
Dev.

Hi,
first put the file in application server and then in we16 give the directory name and the path and the sender port info and press execute..ur idoc will be generated.before that in we21(FILEPORT),in the inboundfile maintain the directory name and the path.
Regards,
Nagaraj

How to create Dynamic Selection List containg file names of a directory?

Hi,
I need a Selection List with a Dynamic List of Values containing all file names of a particular directory (can change through the time).
Basically, I need an Iterator over all file names in a directory, which could be used for Selection List in a JSF form.
This iterator has nothing to do with a database, but should get the names directly from the file system (java.io.File).
Can anybody tell me how to create such an iterator/selection list?
I am working with JDeveloper 10.1.3.2, JSF and Business Services.
Thank you,
Igor

Create a class like this:
package list;
import java.io.File;
public class fileList {
    public fileList() {
    public String[] listFiles(){
    File dir = new File("c:/temp");
    String[] files = dir.list();
    for (int i = 0; i < files.length; i++) {
            System.out.println(files);
return files;
Right click to create a data control from it.
Then you can drag the return value of the listFiles method to a page and drop as a table for example.
Also note that the Content Repository data control in 10.1.3.2 has the file system as a possible data source.

Create Mapping As a Flat File Source

Hi,
I'm new to OWB, my first project is to load data through flat file to oracle.
step i follow is,
=>Create Flat File Module
=>Create Location Directory
=>Create Flat File
=>Create External Table (Synch with my Flat File)
=>Create Mapping (Simple External Table mapped to table operator)
=>Create and bind table Operator
Mapping successfully deployed and but when i want to run it gives me following Error
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file IPDirectory.txt in FLAT_FILE_MOD_LOC_0 not found
When I directly mapped flat file to Table in mapping it gives another error
RPE-01013: SQL Loader reported error condition, number 4.
SQL*Loader-522: lfiopn failed for file (\\sfs\Analytics\Reference\SIMPLE_MAP.log)
I mention here that im working on my pc with OWB Client not on server and want to load data through flat file which is on my pc or on our sharing drive.
Please help me on this issue
Regards

Hi,
OWB generates SQL * Loader code for Flat File operator, if you try to change the configuration parameter to PL/SQL it results in error.
External tables would be a better choice as it reduces the processing time, disk space required and also makes it possible to use SQL and other complex transformations.

Import tables using same file name for all tables

hi,
We are using oracle 11.2.0.3.0, we have taken export of multiple tables in schema, unfortunately in exp command we have mention same file name for all the tables, now it has created one file for all export but the size of that file shows that all the tables included in it , when we try to import the tables only last table mention in export command is imported for other tables it hangs, example of code show below.
Is there any way to import the remaining tables.
exp system file =exp05042013.dmp tables=gr.table1
exp system file =exp05042013.dmp tables=gr.table2
exp system file =exp05042013.dmp tables=gr.table3

Hi,
You can use as :
exp username@database tables=table1,table2 file=tabledata.dmpDid you have any RMAN full backup?
Why you are not recover crash database?
Mahir

Custom metadata fields used in file name?

Hi,
Is it possible to add to the list of meta data fields that are used as tokens for file names?
I've been using Rob Cole's excellent custom meta data in the library module and now I want to use these fields to name the file during export...
While at it, is it possible to add the same custom meta data fields to the info view overlay in develop mode?
Cheers,
Bonny

1. Its possible an export filter (post-process action) could be defined that supports the custom metadata for export filenaming (Lightroom itself does not have any other hooks I'm aware of) - dunno if anyone's done that, yet.
2. I think not (see PM).
Rob

Creating Map IDs using HTM File Name

Similar Messages

Maybe you are looking for